Telescopic working platform

JLG Toucan T 12 E+ (30470)

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm Ijdpfx Adovxwkfsnea total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: ready for operation (used), functionality: fully functional, cutting width (max.): 1,100 mm, cutting height (max.): 1,200 mm, Danobat CP 1211T Large Capacity Bandsaw Cutting Capacity Dia / Square 1100mm Cutting capacity rectangle 1200mm wide x 1100mm high Iodpfx Aotv Nadsdnja Fully automatic

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 17,500 kg, working height: 1,300 mm, working width: 1,300 mm, working range: 1,300 mm, Amada H1300 Horizontal Bandsaw (1982) Capacity 1300 x 1300mm Power 230 V – 50/60 hz / 400 v – 50hz / 460 v 60hz Blade drive 11 kw Hydraulic drive 3.7 kw Coolant drive 0.4 kw Wire brush drive 0.4 kw Blade size 11380mm x thickness 1.6 x width 65 mm Net weight 17.500 kgs Total power requirement 16 kw Machine Data: Iodpfotv E Hcjx Adnea Model H1300 Year of Construction 1982 Built in Japan

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed Iodpsfgyigofx Adnea vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, table height: 650 - 1050messurements (LxWxH): 1980 x 1480 x 650 bis 1050table width: 1480table length: 1980weight approx.: 491This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Iodpfx Asfk E Dzjdnsa

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 308This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Iodpsgrvv Tefx Adnoa For more information please follow this link:

Condition: good (used), Year of construction: 1999, Technical specifications Ø: 1100 mm Isdpfx Ajv Tzxvjdnsa Rectangular: 1300 x 1100 mm

Condition: new, Condition: New machine Year of manufacture: 2024 Operating hours: on request Max. working height: 12.65 m Working outreach: 6.05 m Total length: 3.65 m Total width: 1.99 m Total height: 1.20 m Max. load capacity: 200 kg Weight: 4900 kg Key features: • Steel platform, 0.70 m x 1.05 m (L x W) • Rear entry with sliding latch • Fully proportional joystick for drive and lift functions with integrated thumb steer rocker switch • 2 mini-joysticks enable proportional control of the mast and jib arm lift/lower functions • 4.14 m articulated jib • Function activation with enlarged LCD status display • Load monitoring system • AC power outlet in the work platform • Large tool tray • Direct electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power-saving function when idle • Function limit when battery is critically low • On-board diagnostics system with integrated display • Automatic rear wheel brakes • Curved polyester protective covers • Motorized platform rotation • Heavy-duty steel mast, 345° rotatable • Chain slack detection • 3° tilt alarm with warning light • Chassis width 1.20 m • Lifting and lashing eyes Iodpfx Asvxi S Iodnea • Key-secured ground control selector switch • Battery status indicator • Hour meter • Horn • Direction control system • Harness attachment points • Xenon beacon • Manual emergency lowering • Passive pothole protection Leasing/financing available through leasing partners Hire purchase option – rent first, then buy (rental costs can be deducted from the subsequent purchase price). This offer is non-binding and subject to change. We are happy to demonstrate the machine and provide you with an offer tailored to your needs. The machine has CE certification and documentation is available. No guarantee for input errors. Subject to errors and prior sale.

Condition: used, Year of construction: 2009, operating hours: 1,154 h, Genie Z30/20N articulated telescopic boom lift Platform height 9 m * working height 11 m * lateral outreach 6,5 m * counter reading 1154 hours * powered by 48 volt electric motor with integrated charger * tire size 22x7x17 (tires bad) * tread depth 0 mm * non marking Iedpfeqxcu Nsx Adnea * Wheelbase 1580 mm * Wheel formula 4x2 * overall dimensions in length x width x height 5300 x 1200 x 2020 mm * weight 6599 kg * Basket load 227 kg * Basket rotatable, * hydraulic basket arm 1250 mm (rotatable) * basket dimensions in length x width 990 x 650 x 1100 mm, * basket and floor control More data and further pictures gladly on request. This description is not a binding offer and may contain errors. No guarantee on all data. Visit also our homepage

Condition: used, Year of construction: 2010, operating hours: 944 h, Articulating Boom Lift JLG E450 AJ - Working height: 16 m - Platform height: 14 m - Lateral outreach: 7.5 m Iodowvdamspfx Adnea - Year of manufacture: 2010 - 944 operating hours (as indicated by meter) - Powered by 48 Volt electric motor with integrated charger - Tyre size: 240x55x17.5, tread depth 4-9 mm - Wheelbase: 1,980 mm - Drive configuration: 4x2 - Overall dimensions (L x W x H): 6,600 x 1,750 x 1,980 mm - Weight: 6,697 kg - Platform load capacity: 230 kg - Rotatable basket, hydraulic jib arm 1,250 mm - Basket dimensions (L x W x H): 1,460 x 580 x 1,100 mm - Basket and ground controls Further information and additional pictures available on request. This description does not constitute a binding offer and may contain errors. No guarantee is provided for all details. Please also visit our website at