Articulated boom lift

JLG 520AJ Valid inspection, *Guarantee! Diesel, 4x4 Dr

Condition: used, Year of construction: 2015, operating hours: 2,485 h, machine/vehicle number: 0300212166, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 10.850 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 2.050 cm Max. horizontal reach: 1210 m Lhedpfjtr Itbjx Ad Neb Transport dimensions (LxWxH): 8.55x2.45x2.85 Please contact PFEIFER GROUP for more information

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. Lhjdpfxofg E Hle Ad Nob • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator Ledod Iipmepfx Ad Nshb • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: used, power: 74 kW (100.61 HP), gearing type: hydrostat, fuel type: diesel, lifting height: 9,000 mm, Year of construction: 2014, operating hours: 6,223 h, Empty weight: 7.980 kg Make of engine: Deutz Lifting capacity: 3.200 kg Serial number: 941017 Front tyres / undercarriage remaining: 80 Lodpotr Iqcsfx Ad Nohb Rear tyres remaining : 80 Tyre brand: - Transport dimensions (LxWxH): 4.7x2.34x2.3 Please contact PFEIFER GROUP for more information

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Lhsdoqiz N Rspfx Ad Nob Lifting height 9 meters

Condition: used, Year of construction: 1983, Manufacturer Wohlenberg offers the 137 EMC model, crafted in 1983. This machine boasts a format of 1370 mm and is currently operational in a printshop located in Deutschland. The price for this equipment is available upon request. Notable features include an air table, lifts on both the right and left sides, and a programmable interface. Format: 1370 mm Lhsdpfx Aov I U A Dod Nsb Equipment: Air table Lift right and left program

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) Lsdpfx Adjdrtals Nohb each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: Lhjdop Stgnepfx Ad Njb - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot Lhodpfx Adetwm Ube Nob The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg This modern Ficep Flex FRC 1201 coping robot system is in very good condition.

Condition: new, Year of construction: 2024, Genie Z34/22 IC diesel articulated telescopic boom lift, new, used, demonstration machines available Lhsdpjrnqq Hefx Ad Nsb