Articulated boom lift

Hinowa LL 20.10 MK3 Bi Energy | 2025

Condition: used, Year of construction: 1999, Carrying capacity: 19.990 kg GVW: 8.010 kg Nsdjtr H Enjpfx Ahvecn Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Front tyre size: 245/70 R 17.5 Rear tyre size: 245/70 R 17.5 Please contact PFEIFER GROUP for more information

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Nedpfx Ahsn N Ekcovscn Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: ready for operation (used), Year of construction: 1990, Böcker LH 710 Ncedpfx Aohh Swkohvjn with electro-hydraulic drive year of construction 1990 No.3216/2 nominal load 300kg dead weight 255kg lifting height 7100mm Overall height 2200mm

Condition: new, machine/vehicle number: 1, empty load weight: 11,000 kg, maximum load weight: 28,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 870 mm, suspension: air, tire size: 245.70 r 17.5, color: dark red, Year of construction: 2020, Equipment: ABS, new ceylan trailer to be registered , 3 axles with 1st liftable and 3§°steerable, ebs, double full-side electro hydraulic ramps, wideners, winch predisposition, lower part height 87cm, length 9.95m, total 13.65, rud hooks, immediate delivery except sold-warranty-CONCESSIONARY INTERDRIVE SRL-PARMA Njdsh S Aw Rjpfx Ahvecn

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Ncodpfx Asu At Thehvon Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: used, Dimensions (HxWxD) 1700x1020x800 mm Ncedpewqg Suefx Ahvjn

Condition: excellent (used), Drawer cabinet with three telescopic drawers and doors width 550 mm depth 660 mm height 710 mm 1 drawer : 50 mm internal height Nsdpfx Ahsit I Rhevscn 80 mm inner height 110 mm internal height 1 drawer

Condition: new, functionality: fully functional, machine/vehicle number: 0684, empty load weight: 4,000 kg, maximum load weight: 40,000 kg, overall weight: 44,000 kg, loading space length: 4,000 mm, loading space width: 2,200 mm, loading space height: 780 mm, tire size: 405x260, tire condition: 100 %, Year of construction: 2026, Transport Trolley TPW 40 AL-PA-AW Type: TPW 40 AL-PA-AW Serial No.: 0800 Year of Manufacture: 2026 Payload: 40,000 kg over 60% of the loading area at 6 km/h Dimensions: Loading platform length: 4,000 mm Width: 2,200 mm Height: approx. 760 mm Steering: All-wheel steering, oscillating axle, rocker axle Tyres: 16 heavy-duty wheels, 405-260 Drawbar: Drawbar length 1,800 mm with anti-drop device and towing eye to DIN standard for 40 mm pin Paint finish: RAL 2000 Ncsdpfx Asfxgxnohvsn Transport Floor: 50 mm Douglas fir-larch, countersunk and bolted into the frame #HeavyDutyTransport #IntralogisticsTransportSystems #HeavyDutyTrailer6-100Tons #HeavyDutyTrailers3to100Tons #HeavyDutyTransportFlatbedTrolleys #HeavyDutyPlatformTrailer #AllWheelSteering #TransportTrolley

Condition: new, power: 10.3 kW (14.00 HP), fuel type: gasoline, Brugger HX10 shredder - Powerful, compact and versatile! The Brugger HX10 shredder is the ideal solution for all gardening professionals and hobby gardeners who are looking for a powerful yet maneuverable shredder. With its powerful 14 hp petrol engine and robust design, the HX10 effortlessly shreds branches and trunks with a diameter of over 10 cm. Whether in private gardens or on larger sites - this shredder brings power to every corner! Thanks to its narrow design, the HX10 is perfect for use in confined areas. The device can be easily adjusted by hand and maneuvered with ease, allowing you to work efficiently even in difficult garden areas. With a width of just 80 cm, the HX10 can get through any garden gate. Your advantages at a glance: - Powerful: 14 hp petrol engine for powerful shredding - Effective: Processes branches and trunks up to a diameter of over 10 cm - Compact and maneuverable: Narrow design for easy maneuvering in small spaces - Easily adjustable: Flexibly adjustable for comfortable working - Perfect for horticulture: Ideal for use in private and professional gardens Ncsdoumv E Hepfx Ahvjn The Brugger HX10 - your all-purpose weapon for efficient garden maintenance! Technical data: Dimensions: 140 x 80 x 165cm (l x w x w) Weight: 185 kg Blades: 2, 30cm wide Max. Diameter: 10cm Processing/h: 4-6m3/h Feed hopper: 51 x 42 cm --- All prices plus VAT. Contact us for a customized offer!

Condition: new, High quality pillar drilling machine with a top equipment. FLOTT SB 30 Plus R2 (230.501) Standard equipment: - Main switch Ncodpfoi Hp Hlox Ahvon - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - Emergency stop button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - 3 years warranty for one-shift operation Speed versions: Art.No.: 230.500 R1 (0-1.000 1/min, 100 Nm) Art.No.: 230.501 R2 (0-1.600 1/min, 70 Nm) Art.no.: 230.502 R3 (0-4.000 1/min, 200 Nm) Continuous/normal drilling capacity (mm): R1: 27/32 (in E335/ST60) (100) R2: 25/30 (in E335/ST60) (70) R3: 30/35 (in E335/ST60) (200) Threading capacity (depending on pitch): R1: M24x3 / R2: M20x2.5 / R3: M30x3.5 Spindle: MK III drilling depth (mm): 125 throat depth (mm): 300 column diameter (mm): 125 Usable working area (W x L) (mm): 590 x 450 Speed display: Digital Drilling depth display: Digital Drilling depth stop: with fine adjustment Table height adjustment: with rack spindle/working surface (mm): 150-700 machine dimension without packing (mm): 610 x 900 x 1.980 machine dimension with packing (mm): 670 x 1100 x 2140 Motor current 400V with frequency converter (kW): 3,0 Spindle speeds stepless (1/min): R1: 0-1000 / R2: 0-1600 / R3: 0-4000 feed (mm/rev): by hand weight (kg): 370 Note: For all other models, please contact us.