Cooling compressor

GRAM GSV II 64

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: Fgjdpfx Acehhc Ixe Ajd - max. working width 2540 mm - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Fgsdswd Talopfx Ac Aed

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm throat: 70 mm rear stop: 520 mm power: 380 V, 6,3 kW space needed: 3200 x 2300 x 1270 mm weight: 4600 kg Fedpfob H Ibujx Ac Asgd

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: Fsdpjuagxpsfx Ac Aegd - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t Fgjdpjtqmvzofx Ac Asd - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: good (used), Year of construction: 1969, Pneumatic adhesive press, Maximum pressure: 10 bar, Adhesive bar with heating, Adhesive surface: 550 x 40 mm, Infinitely adjustable temperature setting for the lower and upper adhesive bars from 0 to 300 degrees Celsius, Fsdpfx Aod Dxqbjc Asgd Infinitely adjustable adhesive dwell time, Drive power: 5 kW, 380 volts, 50 Hz, Two-hand operation with SIEMENS control. Pressure build-up via articulated lever, Maximum opening distance: approx. 30 mm.

Condition: good (used), Year of construction: 1982, sheet width . mm Fgedpeq Dta Iofx Ac Asd working width 4500 mm plate thickness . mm 8mm distance between columns . mm

Condition: good (used), Air cooler, evaporator, cold storage, refrigerated container, cold room -Area of application: for connection to a cooling system -Fan diameter: 500 mm -Maximum permissible operating pressure: 8 bar -Permissible operating temperature: 100 °C -Pressure at sub-zero temperatures: 21 bar / -60 °C -Contents: 13.2 liters -Slat spacing: 7 mm Fgjdpfxsb Nx Hlj Ac Ajd -Number: 2x coolers available -Price: per piece -Dimensions: 1350/740/H700 mm -Weight: 174 kg/piece

Condition: excellent (used), MADO MEW 731 with fridge and mixer arm Type - MEW 731. Capacity - approximately 3000kg/h. Auger diameter - approx. Vessel liters - approximately 250 liters. Motor - 21.0kW, 50A. Vemaglift included. Fgedpfou Hzh Iex Ac Aod CLH.24.

Condition: new, Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Fgodpfx Aeq Tn I Noc Aed Spindle, air-cooled, 6kw, 18000 rpm. Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)