Shearing Plant

Fleissner/Menschner

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production Djdpfxetunccs Ab Tscr *

Condition: excellent (used), Year of construction: 1992, Clamping force 8,000 kN Dodpfx Abstucrcs Tjcr Opening stroke 1,000 mm Clamping platens 1,620 x 1,525 mm Tie bar diameter 180 mm Screw diameter 105 mm Special injection weight 3,740 g Machine weight 65 tons

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 800 – 12000 MX injection molding machine Year of production - 2006 Closing system: - Mold closing force: kN 8000 - Mold opening force: kN 560 - Dimensions of the mounting plate (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Dsdpfx Astmq Akob Tscr Injection system: - Screw diameter: mm 135 - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Number of screw revolutions, standard/option: rpm 121/153 - Injection efficiency (standard) Electric-hydraulic equipment - Nominal power of the pump motor: kW 110 - Installed power of heaters: kW 57 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (length x width x height): m 10.81 x 2.92 x 2.51

Condition: good (used), 50 pcs on stock many models Dcsdpslif N Ijfx Ab Ter

Condition: good (used), Year of construction: 1999, Engel ES 7 K Clamping force 1000 tons Djdjlyr Awspfx Ab Tocr Year built: 1999 Screw diameter: 105 mm Injection volume: 4160 cm3 Number of heating zones incl. nozzle: 7 Pump drive power: 130 kW Clamping force: 1100 tons Opening stroke: 1100 Min-max mould height Tie bar spacing: 1400x1150 Machine weight: 64 tons + 18 tons Plus Engel Robot Type: ERC 83/2 - CL Year built: 1999 Separate control cabinet

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Outdoor unit Dcsdefl Iqujpfx Ab Tor 4x8 kw heating wire 32kW 160 ° C max

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. 1 piece control valve, 4 pieces pressure measurement with display, 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, Dodpfof Dc D Hox Ab Tocr 1 piece pre-assembly of the plant in the factory of the contractor,

Condition: good (used), Year of construction: 2006, Krauss Maffei injection molding machine KM 350 - 2700 C2 Year of construction : 2006 Control : MC 4 Technical details Clamping unit : Closing force : 3500 kN Mold opening force, max: 220 kN Moving force of moving plate Opening: 105 kN Moving force of moving plate Closing: 95 kN Size of mold plates (h x v): 1060 mm x 1095 mm Distance between columns (h x v): 710 mm x 710 mm Mold opening stroke: 920 mm Mold height min: 380 mm Max daylight: 1300 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejector force: 95 / 48 kN Dodemki Iujpfx Ab Tecr Injection unit Auger diameter: 80 mm Ls/D ratio: 20 Injection pressure: 1829 bar Displacement volume: 1433 ccm Injection weight, PS: 1304 g Injection speed: 513 ccm/s Screw speed: 218 1/min Maximum plasticization rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump motor capacity: 75 kW Installed heating power: 36 kW Adjustable barrel heating zones: 7 Tank capacity: 720 ltr. Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total weight of the machine: 15300 kg Maximum mold weight: 4780 kg

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Dcedjva H Amjpfx Ab Ter Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Type: Horizontal Drive: Hydraulic

Year of construction: 1999, condition: used, Lattice girder line PITTINI IMPIANTI (Italy) Brand name – Pittini Impianti ( made in Italy) Built year – 1999. Still installed, under power, production stoped 5 years ago. Min – Max UPPER longitudinal wire diam. - 5,00 – 12,00 mm Min – Max LOWER (2 wires) longitudinal wire diam. - 4,20 – 12,00 mm Min – Max Fret(zig-zag) wire diameter – 3,60 – 8,00 mm Min – Max lattice girder height – 90 – 250 mm Lattice girder base width – 100 mm Lattice girder pitch – 200 mm Min - Max. Cutting length (run-out table) – min. 3,60 m - max 12 meters. Min. Cutting length – 200 mm Max speed (capacity) – 24 meters per minute Power – 380 V , 50 Hz Total installed power – 85 kW Dodjikvg Njpfx Ab Tjcr