Mini excavator

DOOSAN DX 55-9C

Condition: used, mileage: 899,000 km, power: 315 kW (428.28 HP), first registration: 11/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2024, brakes: retarder, color: blue, gearing type: automatic, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special equipment: Airbag driver's side, Audio system: CD radio (Bluetooth), Compressed air connection in cab, Compressed air tank aluminum, Compressed air horn, Driver assistance system: Attention-Assist (drowsiness detection sensor), Driver assistance system: Brake assist (Active Brake-Assist 3), Driver assistance system: Lane departure warning system, Cab: with air suspension, Suspension: front springs 7.5 t, 2 leaf, Fleetboard vehicle computer, Tinted windshield, Info display 12.7 cm with additional display, Cabin filter construction site vehicles, LM rims 11.75x22.5 (ALCOA matt, on front axle), LM rims 9.00x22.5 (ALCOA matt), mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, reinforced engine brake, auxiliary drive MB 131-2c, frame lowering without bellows residual pressure control, tire pressure control system, retarder, automatic circuit breaker, seats in cab: Driver's seat comfort swivel seat, sun visor outside, sun protection roller blind side window, driver's door, socket 12V in passenger footwell, socket 24V / 25 A in passenger footwell, preparation / switch lift axle on semitrailer / trailer, preparation fleetboard, preparation cool box / refrigerator, oil cooler gearbox Further equipment: Lrodpfxevhzffs Aagjh EURO 6 emissions standard, axle configuration: 4x2, axle load front axle 7.5 t, Actros 4, trailer socket 24V / 15-pin, work lights, exhaust to right outside, exterior mirrors electr. adjustable and heatable, differential lock rear axle, compressed air unit medium, cab: width 2.30 m, cab: L StreamSpace, cab floor with engine tunnel 320 mm, suspension: leaf / air, suspension: front spring block aluminum, electric window regulator, generator 100 A, transmission 12-speed - type: G 211-12, urea tank (AdBlue): 60 ltr, rear axle disk wheel 440, body/body: tractor unit, comfort couch below, comfort locking system, communication interface, 3-part mudguards, radiator blind, regulated power steering pump, 2-stage air compressor, engine 10.7 ltr. - 315 kW R6 diesel (OM 470), engine compartment encapsulation, ramp mirror, residual heat utilization, front and rear axle disc brakes, seat cover / upholstery: fabric, seats in cab: passenger function seat, seats in cab: Driver's seat backrest can be folded down, Voltage transformer 24V / 12V 10 A, Front splash guard, Front axle stabilizer bar, External left-hand storage flap, 24V cab socket, Tachograph / EC tachograph, Door extension for cab, Aerodynamically shaped underbody panelling, Front underride guard, CB radio preparation, Toll collection preparation, Cranked front axle, Regulated water pump, Perm. Gross vehicle weight 18.00 t, Auxiliary heating (water)

Year of construction: 2025, condition: new, machine/vehicle number: 747924113, Dipperfox SC600 - the new standard for urban greening. The Dipperfox product family is growing with the new addition - the baby Dipperfox, called SC600. As an original, the Dipperfox 850 Pro is the world's most effective stump removal machine for large excavators, for use in construction and forestry. Our SC600 model carries the performance, but can be be adapted for smaller carriers. The DF600 is a tool for people in cities, municipalities, arborists, and gardens - Where full size crawler excavators are too big to use. The main advantages compared to conventional stump grinders are safety, noise level and efficiency. Because Dipperfox's rotation speed is a maximum of 60 RMP, there are no flying debris and if the blade hits the rock, it is simply pushed away. No need to create large Safety zones to get the job done. And as a true member of the Dipperfox family, the SC600 does does the same job, but much faster compared to vertical grinders. It can also be used to work up to half a meter below the ground. It is very useful when you need to plant a new tree in the same same place where the original stump was located. Dipperfox SC600 is a multi-carrier tool suitable for the following: Lrsdpfelqak Dox Aageh * Backhoes between 6 and 14t * Backhoe loaders from 6t * Skid steer loaders and compact track loaders from 6t * Hydraulic pressure 170-280 bar and 65-150 l/min Further information Equipment: shears, Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: reconditioned (used), functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Lrjdswfdi Hopfx Aagoh

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), gearing type: hydrostat, color: yellow, overall weight: 2,000 kg, empty load weight: 2,200 kg, operation weight: 2,200 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: 2000, Equipment: additional headlights, cabin, GT2000 The GT2000 crawler excavator is a robust and versatile machine weighing 2,200 kg, ideally suited for earthworks, construction, and installation projects. Thanks to its stable construction and precise hydraulic system, it delivers excellent performance on large construction sites as well as in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F engine delivering 15.2 kW, ensuring fuel-efficient operation, long service life, and consistent performance. The excavator can also operate on slopes of up to 35°. Hydraulic System The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient work movements. The bucket digging force is 14 kN and the arm force is 10 kN, enabling fast and effective excavation in various soil conditions. Operating Parameters The GT2000 can dig to a maximum depth of 2,050 mm, a vertical depth of 1,955 mm, and has a dumping height of 2,385 mm. The maximum working range is 3,860 mm and the minimum digging height is 3,365 mm. Rotation and Maneuverability The superstructure rotation speed is 10–12 rpm, ensuring efficient and fast work cycles. Both the minimum turning radius and the rear swing radius are 1,125 mm, facilitating maneuvering in tight spaces. Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimum ground clearance of 210 mm, providing stability. The ground clearance of the dozer blade is 230 mm and its maximum digging depth is 275 mm, supporting safe operation on uneven terrain. Swing Arm and Cabin The swing arm can rotate 75° to the left and 45° to the right, enhancing operational versatility. The cabin height is 2,270 mm, offering the operator good visibility and comfort during operation. Model: GT2000 Operating weight: 2,200 kg Engine type: Yanmar 3TNV80F Rated power: 15.2 kW Rotation speed: 10–12 rpm Maximum bucket digging force: 14 kN Maximum arm digging force: 10 kN Hydraulic system pressure: 18 MPa Maximum slope angle: 35° Travel drive: Single speed Swing arm: Yes Expandable tracks: Yes Joystick: Yes Standard bucket capacity: 0.06 m³ Rear swing radius: 1,125 mm Minimum digging height: 3,365 mm Maximum dumping height: 2,385 mm Maximum digging depth: 2,050 mm Lrjdpfxoqv E S Rs Aagoh Maximum vertical digging depth: 1,955 mm Maximum digging range: 3,860 mm Minimum turning radius: 1,125 mm Dozer blade ground clearance: 230 mm Dozer blade maximum digging depth: 275 mm Swing arm angle left: 75° Swing arm angle right: 45° Cabin height: 2,270 mm Wheelbase: 1,230 mm Track width: 820 mm Minimum ground clearance: 210 mm

Condition: used, Year of construction: 2013, operating hours: 1,631 h, Equipment: * Operating hours: 1,631 * Cab * Ditching bucket Lrsdsundr Dopfx Aagjh * 1 shovel * Well-maintained machine * Immediately ready for operation Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continually offer attractive financing options at special low rates. If interested, we are happy to prepare an individual offer for you! Trade-in of your commercial vehicle or construction machine is welcome. If a new TÜV inspection is desired, we will gladly provide an offer through our partner workshops. Please note: our offer does not generally include a new TÜV inspection. Delivery of your “new” commercial vehicle is possible via our external partners for an additional fee. The information provided in advertisements, online, price tags, and images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment may need separate verification. Subject to prior sale and errors.

Condition: new, Year of construction: 2023, GG JAPAN 1000 Gunter Grossman & Kubota The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable track undercarriage 6. Articulated Boom pro 7. Hidden driving motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy tracks for a pleasant ride.. 14.2 driving speeds We have all spare parts for machines of our brand available throughout Europe Price 11990 EUR (excl. VAT) (Including: Excavator GG1700 bucket 380 mm) SPECIFICATIONS Model: Japan 1000 Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Ledpfoh Uymyox Aagorh Rated Power: 11.8kw/2300r/min Main pump: Parkier Swing motor: Eaton Drive motor: Eaton Driving speed: 3 km/h Stick: Movable sideways Driving speed: two speeds Drive Motors: Hidden Snakes in the style: Hidden DIMENSIONS Total dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770mm Total length of the track 960 mm WORKING RANGE max. Digging depth: 1650 mm max. Digging height: 2610 mm max. Digging radius on the ground: 2890 mm Turning radius: 360° max. Dozer Blade Upgrade Height: 345mm max. Dozer blade digging depth: 255 mm

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm Lrodpfju Ix E Hox Aagjh total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears *

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, General information Lredpjvl Dl Asfx Aagoh Field of application: Construction Serial number: Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2019, operating hours: 1,360 h, Mini excavator CASE CX26C, * Year of manufacture 2019, * 1360 operating hours, * Heating, * Air conditioning, * Rubber tracks, * Dozer blade, Lredpjurfkcofx Aagjh * Quick coupler

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400mm ===== Lodpfxsd Dy S Ds Aagsrh 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1200x500mm