Second-hand machinery for sale (200,000)

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Fjdpfx Akjx Eifkjvsgf Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Control: UNILOG B6 Year of manufacture: 2013 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar spacing h x v: 420 x 370 mm Platen size h x v: 580 x 630 mm Minimum mould installation height: 450 mm Fgjdeyglvpjpfx Akvjf Maximum daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2,042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Theoretical shot weight (PS): 103 g/s Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions LxWxH: 3.7m x 1.5m x 2m Total weight: 4,100 kg Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull 2x Air valve 1x Levelling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing/coloring unit Interface for temperature control unit Tool heating 8x

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Fgedpfx Akeyglw Tsvjf Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economic granulators: Fjdjyr I Eqjpfx Akvjgf This GSE series is ideal for all injection molding and blow molding operations. It is fundamentally suitable for all thin-walled plastic waste. These granulators stand out not only for their attractive purchase price, but also for their robust, split steel/welded housing, excellent cleaning accessibility, and easy knife and screen replacement. Thanks to the tangential housing geometry, combined with V-cut rotors (except GSE 300/300), even bulky and large-volume input parts are accepted and granulated by the rotor. Material transport: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a collection bin for regrind is available, which, like the extraction trough, is made of stainless steel.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills designed for the fine grinding of nearly all thermoplastic plastics. Typical applications include the fine pulverization of regrind material or virgin material from profile, pipe, or sheet extrusion. Additionally, these mills can be used in the food, chemical, and pharmaceutical industries. Fgodpfx Aksyr I Hhjvjf The material is fed centrally through the stationary grinding disc with a dosing device. Fine grinding takes place between the rotating and stationary grinding discs. Discharge occurs via pneumatic extraction.

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Fgedpfeyr Tpnex Akvsf

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. Fgedpfsyr Tkfsx Akvjf The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Rotor width: 140 mm 10 rotor knives 2 rows of stator knives Cross section approx. 250 x 300 mm Drive: 5.5 kW Fsdpfoyr Tk Ssx Akvogf

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a complement to the ZWS series. The series was designed as an economical solution, specifically for the shredding of wood residues in small and medium-sized woodworking companies. AT A GLANCE: Compact design Sturdy welded steel construction Large-volume hopper for material feed Solid steel rotor with bolted knife holders PLC control for fully automatic operation Technical data SMART 600: Infeed 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Fsdpfsyr I Ifsx Akvogf Rotor speed 80 – 120 13 rotor knives Technical data SMART 600 S: Infeed 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 – 120 26 rotor knives

Condition: new, machine/vehicle number: 12007, Technical data: Fgedpfjyr Tpuex Akvjf Cutting area: 700 x 1300 mm Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm Fsdpfxsyr Tlcs Akvogf 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: used, machine/vehicle number: 12248, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Fgsdpoyr Tnwsfx Akvef Inlet cross-section approx. 300 x 600 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW Fsdpjyr Tn Dofx Akvjgf

Condition: used, machine/vehicle number: 12195, Infeed: 600 x 600 mm Fgsdeyr Tnqopfx Akvof Drive: 2 x 37 kW

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Stator blade rows: 2 Rotor width: 520 mm Rotor diameter: 340 mm Fodpoyr Tmajfx Akvogf Inlet dimensions: 500 x 350 mm

Condition: used, machine/vehicle number: 11056, 3-blade rotor 2 rows of stator blades Rotor diameter: 350 mm Working width: 600 mm Fsdpfxsyr Tihs Akvogf Inlet cross-section: approx. 600 x 450 mm Machine with noise protection box

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Fedpfx Ajyr I E Rskvjgf Stator blades: 2 Drive: 5.5 kW

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Fedsyr Tx Aspfx Akvegf Drive motor: 2 x 30 kW

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor 2 rows of stator knives Fgedpoyr Tqrofx Akvef Infeed opening approx. 500 x 490 mm Drive motor: 22 kW

Condition: used, machine/vehicle number: 13110, Rotor diameter: 260 mm Fsdpfx Aoyr Tvbekvogf Rotor width: 400 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 400 x 340 mm Drive motor: 11 kW

Condition: used, machine/vehicle number: 13277, Rotor diameter: 320 mm Rotor width: 440 mm Fsdpfxsyr Txve Akvegf Rotor knives: 3×2 Stator knives: 2 Feed opening approx. 450 x 300 mm Drive motor: 11 kW

Condition: used, machine/vehicle number: 13253, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 rows Fodpfx Akoyr Txpsvjgf Stator knives: 3 rows Inlet cross-section approx. 1200 x 800 mm Drive motor: as per customer request

Condition: used, machine/vehicle number: 12861, Rotor diameter: 400 mm Fedpfx Aeyr Trcekvjgf Rotor width: 600 mm 3-knife rotor 2 rows of stator knives Feed opening approx. 400 x 600 mm Drive motor: 22 kW

Condition: used, machine/vehicle number: 11647, Rotor blade row: 3 Stator blade row: 2 Rotor width: 280 mm Fgedpfxeyr Tmgo Akvjf Rotor diameter: 280 mm Inlet dimensions: 300 x 300 mm

Condition: used, machine/vehicle number: 12949, Rotor diameter: 400 mm Rotor width: 600 mm Rotor blades: 3 Stator blades: 2 Fgjdpfeyr Trvsx Akvef Inlet cross-section approx. 400 x 600 mm Drive motor: 18.5 kW