Second-hand machinery for sale (31)

Year of construction: 2022, Condition: new, Motor 2,2 kW (3 HP), sanding belt 2280 x 150 mm, swivelling edge sanding unit, motorized belt oscillation, support table at the deflection roller pneumatic belt tensioning table size 700 x 350 mm, working surface 1000 x 150 mm, belt speed 22 m/s, Folqw Dtoffyc Nj Iepg roller diameter 140 / 80 mm, suction nozzle D = 100 mm ex stock Seevetal, subject to prior sale

Condition: used, Leitz HM - IV 66 window set with faceplate and front door set. Sold in "as is" condition, tool has not been resharpened, Fslqwehzgy Ne Dt Iopg ex location Seevetal, without transport, subject to prior sale,

Year of construction: 2023, Condition: new, machine/vehicle number: 23-04-35-001, F 25 version 3 Manual height and tilt adjustment 0 - 46° of the saw blade with digital display. Fpelqwsf A Ehts Dt Iog Motor 5,5 kW, 2 speeds 3.600 / 4.200 rpm. Double roller carriage 3200 mm, rip fence incl. fine adjustment and DIGIT X (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting to length up to 3450 mm, scoring unit Basicwith LED light Saw blade diameter max 315 mm, saw blade projection max 104 mm, Cutting height max 100 mm, at 45° max 70 mm, large suction hood (PSV), incl. option front support roller, immediately available from stock Seevetal, subject to prior sale without transport, assembly and instruction

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = compressed air, Felqw Dteiv Huwo Ijpg Material/air ratio = 16:1, Material pressure max. 90 bar, Air inlet pressure 1 to 6 bar, 4 double strokes for 1 liter of material, with gun type MX with double hose, unused since last service 01/20, condition as seen, ex stock Seevetal, subject to prior sale

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 14524145, filter area: 9.5 m², negative pressure: 2,200 Pa, intake manifold diameter: 160 mm, nominal flow rate: 1.447 m³/h, overall weight: 345 kg, total width: 900 mm, total length: 1,715 mm, total height: 2,130 mm, input voltage: 400 V, noise level: 69 dB, input current: 5 A, type of motor: three-phase motor, frequency: 50 Hz, motor voltage: 400 V, input frequency: 50 Hz, Schuko suction unit Vacomat 140/160 XPe Suction connection D = 140 / 160 mm, Filter area 9.5 m², Dust class "M", Test mark H3/BGHM HO 193023, motorized filter regeneration, Motor power 2.2 kW, nominal volume flow 1,447 m³, Fpolqet D U Eysw Dt Iog ex location Seevetal, without transportation, Subject to prior sale.

Year of construction: 2021, Condition: new, machine/vehicle number: GWH432125, Working width 1,100 mm, sanding belt dimension 1.120 x 2.150 mm, max. working thickness 160 mm, combi sanding unit with calibration roller D = 150 mm, pneumatic sanding shoe with insert control, motor 15 kW ( 20 PS), Fpelqjhgmmaew Dt Isg sanding belt speed 18 m per second, stepless feed carpet 4 - 20 m/min., feed motor 0,55 kW (0,75 HP), electric table positioning with motor 0,24 kW and digital LCD height display, mechanical "ECO GEAR SYSTEM" (oscillation of the abrasive belt), automatic carpet centering, Automatic EMERGENCY table lowering, Check-Control-Panel, Automatic sanding roller stop on the control panel, Sanding grit compensation with 6 positions 2 rollers each in the infeed and outfeed, suction connection D = 160 mm, machine with CE - regulations Dimension approx. L x W x H, 1.650 x 1.800 x 2.025 mm Weight approx. 1.300 kg, (identical in construction as Unitek LC 1120 1N KRT) ex stock Seevetal, subject to prior sale, without transport, assembly and instruction

Condition: used, Year of construction: 1980, machine/vehicle number: 18.742, Table milling machine with rigid milling spindle Table size 1,920 x 900 mm, Motor 6/8 kW (8/11 HP), Fpolqwjul Sfmo Dt Iog 4 speeds 3,000/6,000/4,500/9,000 rpm, Milling arbor D = 30 mm with Morse taper MK 5, weight approx. 700 kg, ex location Seevetal, Sale in "as is" condition as inspected, without transportation, subject to prior sale

Year of construction: 1991, Condition: ready for operation (used), machine/vehicle number: 291, Splashboard 2,000 x 1,500 mm, baffle doors right and left 430 mm each, motor 3.6 kW, 400 volt, 50 Hz, 1,440 rpm, air capacity 7.200 m³/h without on/off switch, Fpslqw Dtehnc Hrs Iog pipe connection D = 400 mm with throttle valve, outer dimensions with doors L x W x H: 2850 x 900 x 2350 mm immediately ex stock Seevetal as viewed, without transport and assembly, subject to prior sale

Condition: ready for operation (used), machine/vehicle number: 06G1062, Drive = compressed air, Material/air ratio = 17:1, Material pressure max. 110 bar, Air inlet pressure 1 to 7 bar, Delivery rate per double stroke 60 cm³ with gun type MX with double hose, unused since last service 01/20, condition as inspected, Fpelqw Dsiv Ht Ist Ijg ex stock Seevetal, subject to prior sale

Year of construction: 2023, Condition: new, machine/vehicle number: 28086221201 (AABM0013), MASTERWOOD CNC machining center type PROJECT TF 100 2.0 "PARTNERSHIP EDITION" - MAST0337 Technical data: Axes: X axis: Max. Workpiece length: unlimited Min. workpiece length: 250mm Traversing speed: 0-25 m/min. Y-axis: Max. Workpiece width: 1.000mm for all aggregates Min. workpiece width: 85mm Traverse speed: 0-50 m/min. Z-axis: Max. Workpiece thickness: 60mm Min. workpiece thickness: 10mm Traverse speed: 0-20 m/min. Aggregates: 16 drilling head: vertical spindles in X-direction: 5 pcs. vertical spindles in Y-direction: 5 pieces horizontal double drilling spindle in X-direction: 2+2 pieces horizontal double drilling spindle in Y-direction: 1+1 pieces distance drilling spindles: 32mm speed of drilling spindles: 4.000 rpm. motor: 1,7 kW grooving saw: in X-direction Speed of rotation: 4.000 rpm. Max. saw blade diameter: 125mm Motor: 1,7 kW (the grooving saw is integrated in the drill head) Control system: Personal computer Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with at least 300 GB of storage space CD-ROM drive Color monitor Video card integrated 2 Ethernet cards Program: MASTERWORK MACHINE VERSION Other data: Required air pressure: 8 bar Air consumption: max. 750 l/min Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Suction nozzle: 1 x 150mm Other equipment features: - Air tables at the working area - Roller table at infeed and outfeed - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (operating instructions, switching and pneumatic diagrams are in digital form) "PARTNERSHIP EDITION" consisting of: Milling unit, incl. MASTERWORK software extension Speed: 1.000 to 18.000 rpm. Motor: 4,5 kW with ISO 30 intake Incl. integrated suction control (During drilling only the only the drill head is extracted, for milling only the milling unit is extracted) 6-fold tool changer 3 pieces ISO 30 collet chuck incl. collet chuck Tool equipment, consisting of: HW dowel drill: 5 pieces 5mm - GL 70mm - blind hole drill. 1 piece 5mm - GL 70mm - through hole drill bit 4 pieces 8mm - GL 57,5mm - blind hole drills 2 pieces 10mm - GL 57,5mm - blind hole drills 1 piece 10mm - GL 70mm - blind hole drill bit 1 piece 8mm - GL 70mm - blind hole drill bit 1 piece 15mm - GL 70mm - blind hole drill bit 1 piece 35mm - GL 70mm - blind hole drill bit Fpolqwoiukvkj Dt Ieg 1 HW grooving saw blade d=125mm, bore=20mm, width: 4,0mm, Z=35 WSA 1 DIA cutter, right - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 DIA cutter, left - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 VHW-WP finishing cutter, right, D=10mm Foldable roller conveyor in the infeed Foldable roller conveyor in the outfeed Automatic central lubrication plus options: Complete package for CLAMEX connectors € 3.500,00, complete door package € 3.500,00, software package PaletteCAD start + CAM connection € 3.000,00, freight, installation, instruction € 3.000,00, immediately available from location Seevetal, subject to prior sale.

Year of construction: 1983, Condition: used, machine/vehicle number: 508323, 21-spindle, pitch 32 mm tool holder M 10 external thread spindle distance max. 640 mm Gantry passage max. 1056 mm, stop length 2500 mm with 4 swiveling stops drilling unit with motor 2,2 kW drilling head swiveling, drilling from below height adjustment max. 80 mm drilling depth max. 80 mm, ex location Seevetal, as viewed, subject to prior sale Folqw Dtjdardxs Ijpg

Condition: used, Year of construction: 1995, Edge band thickness 0.3 - 8 mm, Glue-on height max. 51 mm, Edge band length min. 200 mm, Workpiece thickness 6 - 45 mm, Workpiece width min. 60 mm, Workpiece length min. 180 mm, Feed speed approx. 11 m/min, Fjlqwjn Hqkre Dt Iepg Cartridge application system, Cross-cut saw station with 2 saw blades, Combi flush trimming unit, radius scraper, cleaning station, !!! Machine in not overhauled condition !!! bought as seen, without transportation and instruction. ex location Seevetal,

Year of construction: 1994, Condition: good (used), Working area approx. 2-080 x 1,430 mm, lateral baffles right and left, Filter area approx. 1,800 x 1,300 mm, Fpolqepvil Tjw Dt Isg 2 rows of paper volume filters approx. 650 x 1,800 mm inside fine filter G4 approx. 1.350 x 2.000 mm, air capacity 4.500 m³/h, pressure max. 500 Pa, motor 1,1 kW / 1.400 rpm.

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and Fpjlqevl Euxew Dt Isg excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, engine power 3 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the "new" own brand of the company: HoKuTech GmbH & Co. KG --- Houfek long hole drilling machine LLB VD 20 R Motor 1.5/1.9 kW, Transverse displacement in Y-axis 250 mm, Fpsljrxcylsqw Dt Isg Displacement in longitudinal direction X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately available from stock Seevetal, Subject to prior sale,

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, Folqwsvl Eyns Dt Iepg max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2023, machine/vehicle number: 3487, Holzkraft edge sanding machine KSO 150 F Work table 960 x 350 mm, Table height adjustment 230 mm, Sanding surface 1,050 x 150 mm, Belt speed 20 m/sec., Oscillation stroke 20 mm, Fpelqevpq Rajw Dt Ieg Motor 3 kW (4 HP), Motor oscillation 0.25 kW (0.34 HP), Sanding belt dimensions 3,000 x 150 mm, Console for feed device, Veneer edge sanding device with contact shoe with fine adjustment and stop rulers, with grooved infeed ruler for veneer overhangs, Height-adjustable additional table with suction for sanding radii, Sanding unit can be swiveled up to 45° using a lever, Suction nozzle D = 140 mm, Weight approx. 295 kg from the Seevetal location as inspected, without transport, subject to prior sale

Year of construction: 2009, Condition: good (used), Drilling width max. 250 mm, Drilling depth max. 170 mm, Drilling height max. 170 mm, motor 2,2 kW, incl. quick stroke system with scale and 2 height stops, depth stop with scale, 2 eccentric clamps, plug-in fence 90°, longitudinal stop 1000 mm, Dowel hole drilling device with cable control, Fslqw Dtjpiqh Dj Ispg weight approx. 190 kg. ex location Seevetal, subject to prior sale, without transport, as viewed

Condition: new, Year of construction: 2024, machine/vehicle number: 24-01-12-041, with 7" touchscreen and separate keyboard Machine height 910 mm, Operating at eye level with template holder, 2-axis scoring unit and extended cutting height, max. saw blade diameter D = 500 mm, max. saw blade projection 179 mm, Vario motor 7.5 kW (10 HP), LED lighting scoring unit, Table top extension 840 mm, Double-roller carriage 3000 mm, max. cutting length with scoring unit 2905 mm, On/off switch on the double-roller carriage, Angle miter stop, Fpjlqw Dof Dk Ixst Iog CNC parallel stop cutting width 1000 mm, Template holder, Front support roller, STEG, second support on the double-roller carriage, DUPLEX, double-sided miter stop, List price of the machine € 40,380.00 incl. freight and packaging (€ 690.00) + VAT Available immediately from the Seevetal warehouse, subject to prior sale, without freight, assembly and instruction

Condition: new, Year of construction: 2024, machine/vehicle number: L24110255, HoKuTech band saw HoKu BS 640 AS with lower and upper "blue Gruber guide" Felqw Dovmw Ugjt Ispg Work table dimensions 600 x 885 x 840 mm, Flywheel D = 640 mm, max. cutting height 400 mm, max. cutting width 620 mm, Inclination of the work table 0° - 20°, Band saw blade length 4,770 - 4,810 mm, Band width 8 - 35 mm, Motor 2.2 kW (3 HP), Extraction nozzle 2 x D = 120 mm Dimensions 1,050 x 720 x 2,180 mm, Weight approx. 300 kg, from the Seevetal location, as viewed, without transport, subject to prior sale

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, filling capacity at 6 bar approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, motor 400 volts, 50 Hz, 4 kW with Condor pressure switch and pressure gauge, incl. pre-filter, refrigeration dryer (230 volts), automatic boiler drainer (230 V), Fpjlqwjwgcb De Dt Isg and oil/water separator, bolted on a safety pallet with rubber vibration mounts, available for immediate delivery from our Seevetal location, excluding transport, subject to prior sale.

Condition: not inspected (used), With glue specification for wood and plastic edges 0.4 - 2.0 mm, Fpolqwewgc N Ue Dt Ijg (for panel thicknesses over 25 mm, max. edge thickness 1.5 mm, workpiece thickness 10 to 45 mm, min. workpiece length 180 mm, min. workpiece width 65 mm, feed speed 5 m/min., dimensions 2040 x 1350 x 1290 mm, unrefurbished as seen from the Seevetal location, subject to prior sale

Condition: like new (used), Year of construction: 2023, machine/vehicle number: KK00040333, cutting length (max.): 1,600 mm, cutting width (max.): 700 mm, cutting width at rip fence: 700 mm, cutting height (max.): 100 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, overall weight: 277 kg, power: 4 kW (5.44 HP), Circular saw minimax sc 2 c compact, Cutting length max. 1,600 mm, Saw blade max. D = 315 mm, Cutting height max. 100 mm, (79 mm at 45°), max. cutting width at rip fence 700 mm, Extendable aluminum telescopic angle mitre fence, Motor 4 kW (S6), 400 Volt, 50 Hz, Fpelqw Det Epnlet Iog Saw blade speed 3,500 rpm, ex stock Seevetal, without transportation, Subject to prior sale,

Year of construction: 1993, Condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, Fpelqoul Uy Hsw Dt Isg max. pressing dimension 2,240 x 880 mm, motorized height-adjustable counter bearings, 4 pressure beams, can be switched on and off individually, 4 pendulum grids, ex location Seevetal, Sold in "as is" condition as viewed, without transportation, subject to prior sale

Condition: used, Functionality: unexamined, machine/vehicle number: 80234, HEMA band saw with roller diameter 800 mm, blade length max. 5600 mm, motor 3 kW ( 4 HP), Felqsumav Asw Dt Iopg upper and lower saw blade guide, ex location Seevetal, Sale in "as is" condition as inspected, without transportation, subject to prior sale