Second-hand machinery for sale (196)

Condition: good (used), Year of construction: 2007, CNC lathe MICROTURN CHALLENGER BNC 1840, year 2007. Control: FARGO 8055i/A, tool turret VDI 40 / 8 positions, chuck diameter 250 mm. Spindle mount: CAMLOCK D1-6. Center height: 230 mm. Turning length: 1000 mm. Spindle bore: 65 mm. Spindle speeds: 100–4500 rpm. Further data available in the data sheets. Coolant system installed. The machine is in good condition and can be demonstrated under power. Machine documentation available. Accessories: tool holders, jaws for the chuck. Chsdpfoyhzg Dex Agred

Condition: used, 8 units. Heavy-duty trailer package sale Manufacturer: MAFI, Year of manufacture: 1980–1990 Loading area: 2700 mm x 1300 mm x height 480 mm Chjdpfx Ajxzrxxsgred On 2 units, the steering systems are missing, and the tires need to be replaced.

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine KALTENBACH Type : MSK 400 Year 1976 with roller table. Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Codpfsqxamgox Agrehd Machine in good condition, operating instructions available.

Condition: good (used), Year of construction: 2000, CNC flat and profile grinding machine Manufacturer: Ziersch & Baltrusch Type: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electro-magnetic chuck with continuous transverse division Chsdpfx Agsfrbcksrsd 600 x 200 mm, pitch = 4 mm Wet grinding system, with paper band filter automatic, machine tray. Complete machine documentation available.

Condition: good (used), Year of construction: 1960, Straightening and keyway slotting machines, manufacturer CARL HURTH, type: P5V, year approx. 1960. Modernized in 2018 with two-hand control. Clamping length: 1250 mm with various support dies up to 50 mm diameter. 4 dial gauge holders. Ready for use. The machine can also be used for keyway slotting. Dimensions: width 1500 mm, depth 1300 mm, height 2400 mm, weight approx. 2000 kg. Chsdpjy Rgk Refx Agrod

Condition: good (used), Year of construction: 1991, Hydraulic horizontal straightening and bending press Chsdecffzaepfx Agrjd Maximum pressing force: 160 t Manufacturer: MAE, Type: HY RI 160 RH, Year of manufacture: 1991. Further details can be found in the data sheets.

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER Chsdpjmn Thhjfx Agrod TYPE:3S-G year of construction ca.2000 Without cutting head with pipe cutter and end burr device. Runs with V230 current. In top condition, like new.

Condition: good (used), Year of construction: 2003, Vertical milling machine, UNITECH, type: FSS 315-S7, year of manufacture 2003 with 3-axis digital display ACU-RITE Chedev A Trajpfx Agrsd Hydraulic tool clamping, synchronous milling device, coolant device. Travel paths: X 1000 mm Y 355 mm Z505 mm Table: 315 mm X 1250 mm. Spindle mount: ISO 50 Spindle speeds: 28 - 2240 rpm Machine in good condition, machine documentation available. For further data, see data sheets.

Condition: excellent (used), Year of construction: 2004, T-slot clamping plate with frame MÜHLENBAUER Type: ASP 2240 Year 2004 in very good condition . Cedpfx Agjq H Ectorehd Plate : 2240 mm X 2240 mm X 80 mm Frame : 2000 mm X 2000 mm Total height : 320 mm T-slots for M24 T-slot nut Weight : 2300 KG

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Chodoqwgzqjpfx Agrod Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: good (used), Year of construction: 2010, Rotary table Fabr.WEISS Type: TC 220T Year: 2010. Csdoxr Dh Hjpfx Agrehd

Condition: good (used), Year of construction: 1993, CNC cycle-controlled lathe, manufactured by VDF BOEHRINGER, type: DUC 560, year of manufacture: 1993, with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over cross slide: 365 mm Turning diameter over bed: 570 mm Spindle speeds: 3-2500 rpm, spindle motor: 19 kW Spindle bore: 62 mm Chuck diameter: 315 mm, Forkardt Codpfx Ajd Ewaasgrshd Turret with 8 positions, VDI 30 Includes accessories and machine documentation.

Condition: good (used), Year of construction: 1995, Universal milling machine, make AUERBACH, type: 315 FUW, year of manufacture 1995 Chodpfov Dab Djx Agrod with 3-axis digital display HEIDENHAIN, hydraulic tool clamp, machine vice tool holder, counter holder for horizontal milling, coolant system, machine documentation in good condition. Travel paths: X 500 mm Y 400 mm Z 330 mm Table: 400 mm X 700 mm Spindle mount: ISO 40 Spindle speeds: 20-3000 rpm Rapid traverse: X / Y / Z. For further data, see data sheet.

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Chedpet Ipi Isfx Agrsd Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: good (used), Year of construction: 1982, Chip conveyor, Manufacturer: SILISTRA, Type: TCA 280X4710, year 1982, with coolant pump. Was previously connected to a CNC boring mill. Overall length: 5200 mm Neck width: 410 mm Cjdpfx Agjwnpngerehd Neck height: 220 mm Neck length: 4700 mm Discharge height: 800 mm Total height: 1100 mm Weight approx. 1200 kg. In good condition.

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Cjdpfx Agewd Tgferohd Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block.

Condition: used, Year of construction: 1970, Column Drilling Machine FLOTT SB32 Spindle mount: MK3 Cedoyvr Acopfx Agrjhd Spindle speeds: 135–770 rpm Round table, diameter 400 mm Overall height: 2 m Weight: approx. 200 kg.

Condition: good (used), Year of construction: 2001, CNC bed-type milling machine, manufacturer: IBERIMEX-MVR Type: UH-1250, year of manufacture: 2001 Control system: Heidenhain TNC124 Travel distances: X 1250 mm, Y 500 mm, Z 460 mm Clamping table: 360 mm x 1800 mm Spindle mount: ISO50 Machine with full enclosure. Further data can be found on the machine data sheet. Csdpfed Eranox Agrshd Machine in good condition.

Condition: good (used), Year of construction: 1965, LZ lathe, manufactured by HEID, type VK56, year of manufacture 1965. Maximum distance between centers: 550 mm Distance between centers: 1000 mm Spindle speeds: 7-710 rpm / Spindle motor approx. 15 kW / Spindle brake. Four-jaw chuck, diameter 800 mm, Röhm. Rapid traverse in longitudinal and cross directions. Coolant system, various accessories. Shipping weight (total): approx. 7000 kg. Chodpfx Ajzw E Ifegrsd

Condition: good (used), Year of construction: 1992, Bandsaw automation machine, manufacturer JAESPA, type: W400 AZ Control system: Minipos 807, year of manufacture: 1992 Chsdsgf H Saspfx Agrjd Cutting diameter for round material: max. 400 mm Saw blade length: 5500 x 32 x 1.1 mm Feed: automatic, section length: min. 20 mm Chip conveyor Total power consumption: 4 kW Weight: approx. 2500 kg Accessories: 2 saw blades, roller conveyor 6 m, motorized drive, machine documentation available. Space requirement: 2.8 x 2.8 x 2 m

Condition: used, Year of construction: 2010, Clamping tower, manufactured by AMF, with 6 clamping surfaces. Dimensions: 600 mm x 600 mm x 1060 mm Clamping surfaces: 290 mm x 1060 mm (6 sides) Grid pattern of holes, spacing: 50 mm x 50 mm (100 holes per side with threads and clearance holes) Base plate: 760 mm x 735 mm x 50 mm Overall height: 1110 mm Csdocum N Sjpfx Agrshd 2 units in stock. Price quoted is for 1 unit.

Condition: ready for operation (used), Year of construction: 1998, CNC control complete of tool grinding machine SCHNEEBERGER GEMINI Fabr.GE FANUC SERIES 160-M year 1998 with dongle Chodpfxjmn Th Eo Agrjd Complete with controller.

Condition: repair required (used), Year of construction: 1987, EDM sinking machine, manufacturer AGIE, type: EMT 1.20, year of manufacture: 1987. Travel ranges: X 250 mm, Y 160 mm, Z 200 mm Chjdpfx Asix Nqhjgred with R3 adjustable head. Further details can be found in the data sheet.

Condition: used, Year of construction: 1980, Circular saw with miter cutting capability. Manufacturer: KALTENBACH, Type: KKS 400 M, Year of manufacture: approx. 1980. Cjdpfx Ageixumvsrjhd Hydraulic feed, infinitely adjustable. Saw blade: 400 mm.

Condition: good (used), Year of construction: 1990, CNC milling machine, manufacturer: TOS, type: FGS40CNC Control system: Heidenhain TNC 355, year of manufacture: 1990 Chodpjdtfhqefx Agred Travel distances: X 1000 mm, Y 500 mm, Z 500 mm Spindle mount: ISO 50.