Second-hand machinery for sale (179)

Year of construction: 2020, Condition: new, Model: 9503600 P/N: 220490502412 Sample container: 24 x 1 l Connection: 230 V Equipment: Controller compartment heating Dimensions: 760 x 810 x 1,300 mm Fgeb Hhol Dp Itou Uzjb Condition: unused Weight: 86 kg

Condition: good (used), TGL: 28561/01 Table number: 14167 diameter: 315 mm footprint: 380 x 600 mm Height: 150 mm Accessories/equipment: graduation on table 360°, rotatable Fgob Homikdhehu Uzob Condition: good weight: 75 kg dimensions: 600 x 600 x 320 mm dimensions with frame: 700 x 700 x 1.500 mm

Condition: good (used), Manufacturer: Apel Neustadt near Coburg, Germany Exciting: horizontal max. span: approx. 900 mm Diameter lathe chuck: 160 mm Turning diameter over plate: 360 mm turning diameter over guide: 400 mm mode of operation: automatic cycle possible suitable for welding of tubes Instruction by manufacturer possible Dimensions: 2.500 x 1.200 x 1.700 mm Fgob Hhu Ueg Ew Dxozob weight: approx. 0,6 t

Condition: good (used), Year of construction: 2001, Type: HS 400 Control unit: SEICOS (Sigma) 16 M Software version: Operating hours: approx. 74,000 Working hours: approx. 26,000 Pallet clamping surfaces: 400 x 400 mm Pallet changer: 2-fold Workpiece weight: 400 kg Travel x-y-z: 600 - 580 - 580 mm Spindle holder: SK 40 Tool changer: 61 places Speed: 35 to 12,000 rpm Feed rate: 1 to 50,000 mm/min Rapid traverse: 50 m/min Accessories: chip conveyor, coolant device; filter system, Condition: good Fgob Hhjr A E Npeu Uzsb Connection: 25 kW Machine dimensions: 4,000 x 3,700 x 2,300 mm Switch cabinet: mm Chip conveyor: mm Filter: mm Coolant tank: mm Weight: mm Attention: Sale without clamping towers The tool holders are not included, can be purchased separately Availability: III. quarter 2024

Condition: good (used), Year of construction: 1974, Stock number: 2853 Manufacturer: Famot Poland Fjbjti Afno Hhu Uzogb Year of manufacture: 1974 Machine number: 1499 Type / Model: TUM 25B Center width: 500 mm aperture: 30 mm Center height: 155 mm Turning diameter over bed: over slide: 300 mm 130 mm Speed range: 35.5 to 2,240 rpm Feed lengthwise: flat: Connection: 3.2 kW Accessories/equipment: 4-fold steel holder, 4 jaw chuck with interchangeable jaws Condition: good Weight: 1.1 t Dimensions: 1,750 x 800 x 1,350 mm

Condition: excellent (used), Clamping surface: 890 x 425 mm Stop surface: 890 x 385 mm Upper part of the stop surface: 890 x 205 mm Plate thickness: 25 mm Fgeb Hsnpxnmjhu Uzob Thickness stop surface: 30 mm Condition: very good

Condition: good (used), Jaws: 195 x 60 mm Clamping width: mm Footprint: 580 x 200 mm Feb Heq Ewt Eehu Uzogb Height: mm Material: cast iron Weight: kg Total dimensions: 600 x 170 x 130 mm

Condition: used, Year of construction: 1975, Make: Oradea Infratirea Type: G 16 Machine number: 4966 Year of construction: 1975 Drilling capacity: 30 mm Spindle holder: MK 3 Fgjb Hhornrpveu Uzsb Speed range: 150 to 2,360 rpm Feed rate: yes (defective) Table: 490 x 390 mm Clamping surface: 400 x 300 mm throat depth: 285 mm Quill stroke: 160 mm Headstock adjustment: 200 mm Table adjustment: 350 mm Footprint: 500 x 830 mm Connection: 1.65 kW Equipment: Thread cutting device Condition: good, feed defective Weight: 0.7 t Dimensions: 500 x 830 x 2,100 mm

Condition: good (used), Manufacturer: Optimum Type / Model: DDP 50 Pressing force: 1.5 t Table: mm ram: 50 x 50 x 647 mm Projection: 226 mm Lever length: 850 mm Fob Hhu Ujrdgrkezjgb Plunger stroke: max. workpiece height: 459 mm Accessories/equipment: Condition: good Weight: 167 kg Dimensions: 650 x 370 x 785 mm

Condition: good (used), Stock number: 2225 Manufacturer: AGME Spain Type: RR14 Year of construction: 2005 Fgeborhza Ss Hhu Uzjb Machine number: 3815 Control unit: CU 301 Table: 350 x 300 mm Riveting capacity max.: 14 mm diameter Stroke: 5 to 50 mm adjustable Distance table-head: 60 to 270 mm Air connection: 6 bar Riveting force: 1,880 daN Riveting time: 0 to 5 sec adjustable Projection: 180 mm Equipment: 5-fold riveting head, two-hand operation; Connection: 1.6 kW Dimensions: 500 x 720 x 1,200 mm Weight: 0.3 t Condition: tested, ready for use

Year of construction: 2004, Condition: good (used), Type: HMS 10 09.201 Number: 51904 Power: 1,1 kW Capacity V nom.: 720 m³/h Capacity V min: 565 m³/h Pressure: 22,2 mbar at the interface Footprint: mm Fob Hjpbvvpshu Uzegb Suction nozzle top: 100 mm Hose: 2.500 mm

Condition: good (used), Machine number: 45 95060 Type: PHS 4050 Fjb Hjqwx E Sjhu Uzsgb Pressure: 45 t Folding length: 4,050 mm Stroke: mm Backgauge: 1,000 mm Control system: DNC 53PS Condition: good, ready for use Accessories: see pictures Connection: kW Dimensions: 4,250 x 1,800 x 2,500 mm Weight: approx. 6.5 tons

Condition: good (used), Machine number: 2082 Type / Model: F315 Control: conventional travel x-y-z: 820 x 300 x 440 mm table: 1250 x 335 mm table clamping area: 1100 x 225 mm speed range: 56 to 2800 rpm spindle mounting: SK 40 Feed rate: 10 to 630 m/min rapid traverse: Fgsb Hjh Rawfjhu Uzjb Connection: 6 kW Accessories/equipment: Condition: good weight: 2 t dimensions: 1700 x 2000 x 1900 mm

Condition: good (used), Manufacturer: WMW Fgsb Hhujuan Rmo Uzsb Machine type: FUW 200/1 WMW Auerbach Machine number: Type / Model: Turn-tilt-swivel table Table top: 540 x 245 mm Clamping surface: 460 x 175 mm Stop surface: 290 x 195 mm Slot width: mm Groove spacing: mm Table cross adjustment: 135 mm Equipment: rotatable, tiltable and swiveling Condition: good Weight: 80 kg Dimensions: 550 x 500 x 300 mm

Condition: used, Year of construction: 1975, Stock number: 2480 Manufacturer: Rade Koncar Year of manufacture: 1975 Fgebornrtro Hhu Uzjb Type: 2B-1 Device number: 75271 Welding current primary: 220 V 16 kVA 92 A 380 V 16 kVA 53 A Secondary welding current 220 V 100 A 380 V 200 A Equipment: mobile Dimensions: 500 x 700 x 600 mm weight: 120 kg

Condition: good (used), Year of construction: 2012, Stock number: 2873 Manufacturer: BOGE Year of construction: 2012 Type: SF 100-2 Machine number: 5054034 Operating hours: h Delivery rate: 10.5 m³/min Pressure: 10 bar Motor speed: 3,600 rpm Connection: 75 - 0.12 kW Fsb Hhu Ujt Nf U Aezegb Condition: good Weight: 1.1 t Dimensions: 2,100 x 1,050 x 1,800 mm

Condition: good (used), Year of construction: 1995, Manufacturer: Steinbock - Boss Type: H70 - 402 Machine number: 023840 H/82997 Year of construction: 1995 Operating hours: Drive: Gas Lifting capacity: 7 t Overall height: 3,300 mm Lifting height: 4,500 mm Fork length: 1,800 mm Tires: 4-fold SE Engine: PERKINS Condition: good, ready for use Own weight: 9.2 t Fgeb Hhuetvfx To Uzjb Dimensions: 1,700 x 3,600 (with forks 5,300) x 3,300 mm

Condition: good (used), Year of construction: 2004, Stock number: 2958-3 Manufacturer: Koch Type: micro 3000 Year of manufacture: 2004 Device number: ET 066 Feb Hhu Ujvxpc Tozogb Operating hours: 12,877 h Container capacity: 3 l Condition: good Connection: kW Weight: approx. 15 kg Dimensions: 800 x 400 x 300 mm

Condition: new, Electric motor Manufacturer: ABB Type: MZAA160L Serial number: IEC16/2 42 Power: 15.5 kW Speed: 1,460 rpm Shaft diameter: 40 mm Shaft length: 120 mm Fgjb Hhsvz Da Eeu Uzsb Weight: 117 kg Dimensions: mm Condition: unused

Condition: excellent (used), Year of manufacture: 2002 Overhaul: 2010 Type: CNC 607GK Control: Eckelmann (PC control) Operating hours: 14,136 h Table: 718 x 680 mm Travel x-y-z: 780 – 620 – 360 mm Spindle mount: HSK 63F Speed: up to 24,000 rpm Feed rate: up to 8,000 mm/min Accessories: Spindle cooling Condition: Good Suitability: Machine is particularly suitable for light machining and for aluminum and wood Fgjb Hhu Ujwhwwiozeb Power supply: 20 kW Machine dimensions: 1,700 x 3,000 x 2,500 mm Weight: 1.6 t

Condition: good (used), Year of construction: 1976, Stock number: 2909 Manufacturer: ORADEA - Infratirea Year of manufacture: 1976 Machine number: 62981 Type: 6GMA1 Mounting: MK5 Drilling capacity: 63 mm Table: 600 x 700 mm Clamping surface: 450 x 580 mm Distance spindle - table min/max: 200 / 890 mm Vertical adjustment of the head: 690 mm Stroke: 200 mm throat depth: 350 mm Fsbju Tip Rj Hhu Uzsgb Speeds: 56 to 1,220 rpm Feed rate: 0.1 / 0.16 / 0.25 / 0.4 mm/rev Accessories / equipment: Thread cutting option, automatic feed, integrated coolant pump Connection: 4.15 kW Weight: 1.1 t Footprint: 700 x 1,200 mm Dimensions: 700 x 1,200 x 2,600 mm

Condition: good (used), Vibration welding machine for plastic Stock number: 2974 Manufacturer: Branson Type: VIP 2830 Device number: 4.E035.00.A10 Table: 1,000 x 420 mm Stamp: 800 x 420 mm Distance table - stamp: 600 mm Weight: approx. 2 t Dimensions: 2,400 x 1,700 x 2,400 mm Equipment: Fob Hev D Nfrehu Uzogb Condition: ready for use Sold without tools!

Condition: good (used), Year of construction: 1970, Make: Metalexport Poland Year of manufacture: 1970 Type / Model: TUE 40 Machine number: 8604 Control: Conventional Center distance: 2,000 mm Through-hole: 38 mm Fgob Hhjv N Tu Iou Uzob Center height: 210 mm Turning diameter over bed: 420 mm over slide: 240 mm in the bridge: 600 mm Speed range: 22.4 to 1,000 rpm Feed: Power supply: kW Accessories/equipment: Fixed and follow-on steady rest, 4-station tool post; 200 mm 3-jaw chuck; coolant system Condition: Good Weight: approx. 2.5 t Dimensions: 2,800 x 800 x 1,200 mm

Year of construction: 2000, Condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Fob Hjmf Uzxohu Uzsgb Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose

Condition: good (used), Heating or cooling plate Dimensions: 1.600 x 600 x 50 mm Channels: 6 Table / base: 1.600 x 600 x 820 mm Fgob Hhu Ujlnfhzezsb Use: suitable for filling with hot or with cold water