Used separation technology for sale (2)

Year of construction: 2024, condition: new, Overview - of the various variants *not every item is required: Optional: - Bale opener MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator Cjdsff Sbiepfx Agrjhd - Dust extraction auger - length approx. 4 m Four sieves are mounted on the underside, which are vacuumed. Individual price net from: €9,750 - Suction parts / hoses as a package €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator dust extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³ /400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with +/- 20 kg from €67,550 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Performance: approx. 30 bales per hour Hopper capacity approx. 0.7m³ Level sensors for min./max. fill level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek balers / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded Miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The baler compresses the material fed into the hopper without the addition of binding agents by means of hydraulic pressure and packages the material in plastic sacks. The volume of the material can be significantly reduced with the baler. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry matter. The hopper of the mütek baler can be loaded automatically or by hand and has a volume of approx. 0.7 m³. Containers with a larger volume or with an integrated extraction and filter system as a complete disposal unit are also available. In addition to the automatic filling via dust extractor, mütek also offers filling by means of conveyor screws. In both variants, automatic dust extraction is possible. mütek balers are equipped with a control cabinet for operation. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry matter) - maximum 35 mm long

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Chsdpfjdubpuex Agrsd Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net