Used accessories for metalworking machines for sale (37)

Condition: excellent (used), Year of construction: 2010, 1. Clamping table, square design, manufactured by AMF, dimensions 600 x 1060 mm, year of manufacture 2010. Width 600 mm, height 1060 mm (4 sides). Base plate: 760 mm x 735 mm x 50 mm. Grid hole spacing: 50 mm x 50 mm, thread: M16. New price: €12,000. In very good condition. Cjdpoz N S Egefx Agrshd

Condition: good (used), Year of construction: 2010, Hydraulic centering device, manufacturer: SMW AUTOBLOK, type: SLU-3.2, year of manufacture: 2010. Clamping range: 50 - 200 mm. In good condition. Cjdpfszy N N Eex Agrjhd Further data can be found in the data sheet.

Condition: good (used), Year of construction: 2020, Hydraulic 3-jaw chuck, manufacturer: SCHUNK, type: TFH 500-160, year of manufacture: approx. 2020, in good condition. Includes 2 chuck keys and 3 pairs of jaws. Diameter: 500 mm, height: 150 mm. Bore in the front area of the chuck: diameter 160 x 65 mm, depth. Short taper DIN A 8 in the flange, thread in the chuck for tensioning rod (approx. M 100 x 2). Weight approx. 180 kg without jaws. Codpfx Agjzty Rgershd The chuck is in good condition. The chuck was previously installed in a MORI SEIKI SL 6 or SL 603.

Condition: good (used), Year of construction: 2000, Cast iron clamping plate, STOLLE GAP 900, year of manufacture approx. 2000. Dimensions: Length 1500 mm, width 900 mm, height 100 mm, weight approx. 1000 kg. Longitudinal grooves for T-slot nuts M16. Chjdpfx Aozu N Uksgrjd In good condition.

Condition: good (used), Year of construction: 2010, 4 jaw air chuck SCHUNK Type: ROTA TB 850-270 LH/4 Year 2010 with control unit . Chjdpfxeubbx Ho Agrod Chuck diameter 850 mm Bore 270 mm Jaws are individually adjustable with many soft jaws in good condition.

Condition: good (used), 2 pcs. AMF grid panel, 415 mm x 740 mm, height 50 mm. Chjdpfsziwzhsx Agrod Grid: 40 x 40 mm, with 16 H7 pilot holes and M12 threads. With cast support under the panel, height 100 mm.

Condition: excellent (used), Year of construction: 2004, T-slot clamping plate with frame MÜHLENBAUER Type: ASP 2240 Year 2004 Cedpfx Ageq H Ectsrshd in very good condition . Plate : 2240 mm X 2240 mm X 80 mm Frame : 2000 mm X 2000 mm Total height : 320 mm T-slots for M24 T-slot nut Weight : 2300 KG

Condition: used, Year of construction: 2010, Clamping tower, manufactured by AMF, with 6 clamping surfaces. Dimensions: 600 mm x 600 mm x 1060 mm Clamping surfaces: 290 mm x 1060 mm (6 sides) Grid pattern of holes, spacing: 50 mm x 50 mm (100 holes per side with threads and clearance holes) Chodpfx Aecum N Sjgrod Base plate: 760 mm x 735 mm x 50 mm Overall height: 1110 mm 2 units in stock. Price quoted is for 1 unit.

Condition: good (used), Year of construction: 2000, Cast Clamping Angle Plates Manufacturer: Tos - STOLLE Year: approx. 2000 1x Clamping surface width: 1200 mm, height: 3000 mm, depth: 1200 mm, 12 slots: 20 mm Grid spacing: 250 mm, wall thickness: 75 mm, approx. weight: 3000 kg, price: €7,250 negotiable Chsdoy Ix Ngspfx Agred 1x Clamping surface width: 1300 mm, height: 2000 mm, depth: 1500 mm, wall thickness: 80 mm Approx. weight: 3000 kg, price: €5,250 negotiable 1x Clamping surface width: 680 mm, height: 800 mm, depth: 375 mm Grid spacing: 70 mm, slots for M16, approx. weight: 500 kg, price: €2,350 negotiable 1x Clamping surface width: 340 mm, height: 1000 mm, depth: 400 mm Grid spacing: 100 mm, slots for M16 thread, approx. weight: 500 kg, price: €2,150 negotiable

Condition: good (used), Year of construction: 1982, Chip conveyor, Manufacturer: SILISTRA, Type: TCA 280X4710, year 1982, with coolant pump. Was previously connected to a CNC boring mill. Overall length: 5200 mm Neck width: 410 mm Neck height: 220 mm Neck length: 4700 mm Discharge height: 800 mm Total height: 1100 mm Chodjwnpngspfx Agred Weight approx. 1200 kg. In good condition.

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Cedpfsyfnwmjx Agrohd

Condition: good (used), Year of construction: 2005, Electro milling magnet manufacturer: SAV Type:243.77-960X485 Year 2005 with control transformer. Dimensions: 960 mm x 485 mm Height 100 mm Weight approx. 250 kg. Csdpewnpkbjfx Agrehd

Condition: excellent (used), Year of construction: 2010, 4-axis PEISLER Type :RT-215 Year 2010 ( 3rd piece available ) Center height: 215 mm with power chuck Fabr.RÖHM Type:KFD-HS215/3 Fmax.48KN Nmax.3000/min with hydraulic connection for chuck and drive shaft on both sides, without motor and controller in very good condition. Quoted price is for one piece . Chedpfx Aget Daxxsrsd

Condition: like new (used), Year of construction: 2010, Hydr.power chuck Fabr.RÖHM Type : KFD-315 Bj.ca.2010. Diameter :315 mm Nmax:2800rpm Chedpsqxavlefx Agrsd in very good condition

Condition: good (used), Year of construction: 1990, Clamping angle Fabr.AMF Type:1430 Year 1990 Clamping surface : L 1430 X H1130 XT1150 mm T-slot 24X40X40 mm Cjdpfsu Hgrxsx Agrehd in good condition .

Condition: good (used), Year of construction: 2020, 2 pieces in the package Hydraulic machine vise Manufacturer: ARNO Jaw width: 160 mm Max. clamping range: 200 mm. In good condition. Chsdpfoyhzk Asx Agred

Year of construction: 1980, condition: used, Straightening and welding table Fabr.PÜSCHEL Year 2010 . Chjdoq Ru Hxspfx Agrod Table dimensions Length: 1700 mm X Width: 1700 mm Height 760 mm. Table top thickness 30 mm with adjustment screws in good condition.

Year of construction: 1990, condition: ready for operation (used), Multi-edge milling machine for 2 - 4 - 6 edge milling on manual or CNC milling machines Manufacturer WITTE Type: MKF 1001, year 1990. For milling spindle ISO 40 Working range: SW 2 - SW 30 Length: 75 mm Spindle passage: 25 mm Weight approx. 25 kg. Operating instructions available. Chjdpovmglzefx Agrjd

Condition: good (used), Year of construction: 2015, Manual collet chuck Fabr.Ortlieb Type: SSF60/8 Year 2015 Chjdpsucw Hpefx Agred Max. throughput : 60 mm Spindle speed Max : 3000 rpm Spindle holder DIN 8 In good condition without collets .

Condition: good (used), Year of construction: 2000, Cast iron measuring and marking table with under-table cabinet, STOLLE MT1000. Table: 1000 x 1000 mm Height: 1000 mm Cedpfowffz Dox Agrshd Weight: approx. 650 kg In good condition.

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. For CNC lathe OKUMA&HOWA 2SP Cedpoxr Diwjfx Agrshd

Condition: good (used), Year of construction: 1990, Round table, make PEISSLER PRT 500 DM 500 mm. Codpfxjvk D Sge Agrjhd Good condition.

Year of construction: 1998, condition: excellent (used), Grinding spindle of CNC tool grinding machine Chsdpfx Agsm Tr Hlored Make SCHNEEBERGER Type: GEMINI Year 1998 in good condition .

Condition: used, Year of construction: 2005, Hydraulic 3-jaw power chuck, manufacturer: FORKARDT, type: 3KS630, year of manufacture approx. 2005. Diameter: 630 mm. Draw rod thread: M30. Includes 1 pair of hardened jaws. Chedpfx Agjchfr Njrjd Fmax 13000 daN. Max. speed: 1200 rpm. In good condition.

Condition: excellent (used), Year of construction: 2010, CASTING MEASURING PLATE Manufacturer: STOLLE, Type: GMP 6000, Year of manufacture: approx. 2010 Dimensions: Length 6000 mm, Width 2500 mm, Height 360 mm. Very good condition. Cedpfog Uf Nksx Agrjhd Weight: approx. 16,000 kg.