Chiller

Chiller clint NEW Clint CHA/K/ST 604-400

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW Fsdpfxsx Ap Hps Aalepg -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: ready for operation (used), Machine was overhauled and is fully functional, with documentation. Fsdpfx Aofw Az Uoaljpg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: Bay Kessel - BBS Germany Fpsdpfox A Dpljx Aaljg Type: HDK 7000 Capacity approx.: 7,000 kg/h Operating overpressure: 10.0 bar Increased test pressure: 18.5 bar Max. steam temperature: 184.6 °C Water content full approx.: 17,500 l Year of manufacture: 2017 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner WM-GL50/1-A, version ZM-R-NR, gas control line, separate control cabinet, feed water pump, Eco, and existing coarse and fine fittings.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420 Fpjdpfxsud N Hde Aalog  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2024, functionality: fully functional, Multiple load banks are directly available from stock. Contact us today if you want to rent, lease, or buy a load bank. - Load bank 100 kW, 400Vac 50Hz, CosPhi 1 (Very compact, easy to carry in a service van) - Load bank 300 kW, 400Vac 50Hz, CosPhi 1 - Load bank 500 kW, 400Vac 50Hz, CosPhi 1 - Load bank 600 kW, 400Vac 50Hz, CosPhi 1 - Load bank 700 kW, 400Vac 50Hz, CosPhi 1 - Load bank 1000 kW, 400Vac 50Hz, CosPhi 1 - DC load bank with different voltages and capacities in stock, for example, 500VDC and 1000VDC, 1000 kW. If you are looking for a solution to test at different voltages, such as 440V, 690V, or medium voltages like 10kV, do not hesitate to contact us. We also offer solutions for load banks with a variable power factor (CosPhi) and load banks with a power factor of 0,8 (load bank with a CosPhi 0,8). For example, we have inductive load banks, which we could combine with resistive and load banks, including both. Most of our load banks are equipped with a switch where you can choose between internal and external power for the fans. We offer both stationary and mobile load banks. For mobile purposes, we can add forklift pockets and a robust bracket. Fpodpfx Aor Eyycoaleg We are looking forward to your request.

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Fjdepgnftjpfx Aalspg Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Condition: as good as new (ex-display), Various designs such as round, hexagonal or square and in smooth Fpsdpfjh Dmamsx Aalog smooth version, cross-grooved version or with longitudinal and transverse grooves. A current list of available new and as-new SK32/SK42/SK52/SK65/SK80/SK100 expansion chucks can be found on our homepage. We look forward to your inquiry. STALEX Machine Tools GmbH

Condition: used, Year of construction: 2003, turning diameter 190 mm turning length 620 mm control Fanuc Series 18i-TB total power requirement 15 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 5350X3350x2395 m Fsdpfx Aexiy Ausalepg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Fodpfsd Tiu Esx Aalepg Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: good (used), Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor Fodpfjguztgsx Aalopg -Type: BHS 752 -Power: 4 kW / 1450 rpm -Volume flow rate: 28.11 m³/h -Max. operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg