Backhoe loader

CATERPILLAR 434 Baujahr 2022 2700 Stunden

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Gsdpfx Ahoxf Ey Rjveip Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024 _____ Standard equipment/technical data ENGINE Max. power 180/245 kW/HP (ISO 14396) Max. torque 1100 Nm Maximum power with power boost 194/265 kW/HP Max. torque with power boost 1178 Nm 6-cylinder, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without EGR, Stage V Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with pre-cleaner EasyCare cooling package Additional fuel pre-filter with water separator 500-litre fuel tank Gedpjvv Dp Nefx Ahvsip

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Condition: New machine Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Giodpfxsw Eqdkj Ahvep Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set 455/70 Michelin standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 5.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: new, Year of construction: 2024, Price 99000¤ + VAT HMK 102 B Alpha Stage 5, turbo diesel engine 99.8 HP (74.4 kW, 4.4 liters, 4 cylinders Perkins, Road registration possible Luxury glass cabin "Jumbo" of the latest generation, FOPS/ROPS certified with 2 doors Air conditioning and heating CD-MP3 audio device with antenna and speakers Music player ? Bluetooth Street lighting ? 2 front, 2 rear, with flashing light Work lights ? 4 front, 4 rear, independently adjustable Beacon ==> LED reversing alarm Manual mode to activate the gearbox in the event of electronic system failure Tool box, work suit Documentation: user manual, spare parts catalog Giedpfx Ahjwgud Rjvop Servo-assisted, double pedal together or separately, including hydraulic accumulator for effortless braking in engine off Luxurious driver's seat with armrests, headrest, adjustable to the driver's position and weight and seat belt Tilt-mounted steering column TIPshift joystick for front loader 6 forward gears, 3 reverse gears, full automatic/Powershift Two adjustable and tilting panoramic mirrors Windscreen wipers front and rearAutomatic transmission 6 forward gears/3 reverse gears, full Powershift/Autoshift Heavy-duty axles 100% differential lock (rear axle) + limited-slip differential (front axle) Flow-sharing system (enables combined movements)Closed, load-dependent flow-sharing hydraulic system Integrated four-wheel drive (4x4)Front tire 20"Rear tire 16.9-28 12-plyTelescopic arm + Brake line BRAKE LINE VALVE/TELESCOPIC Brake line Double acting hydraulic line MSS (Motion Stabilization System)Auto-locking systemHydraulic joysticks Load control valve (REXROTH-LS (LOAD SENSING)) Variable displacement piston pump With pneumatically suspended seat Retro mechanical displacer Retro hydraulic displacer Price differenceFuel refill pump Selector lever excavator pattern ISO-SAE Rubber pads on stabilizers Safety valves for lifting armSafety valves for loading bucket inclination Safety valves for excavator arm and boom cylinders Overload warning system, EXC. OVERLOAD WARNING SYSTEM, LOADER AUTOMATIC IDLE/STOP Mechanical quick coupler - HMK factory Mechanical quick coupler Hybrid HMK - other brand Mechanical quick coupler Hybrid HMK-JCB Hydraulic quick coupler for 4:1 bucket Standard loader fixed bucket 1.1 m3, 2420 mm width Standard loader 4:1 bucket 1.1 m3, 2420 mm width Forklift forks on the bucket or quick coupler - tiltable Forklift forks on the bucket ==> 6:1 bucket is attached ==> here bucket is attached to forklift Forklift attachment for heavy loads Hydraulic quick coupler cable set (installation costs not included) ==> must be checked Excavator bucket 40cm with teeth and side cutters - HMK Factory Excavator bucket 0.18 m 3 60cm with teeth and side cutters - HMK make Excavator bucket 90cm with teeth and side cutters - HMK make Clearing bucket 150cm without teeth - HMK WestStift (2x pins per bucket) without road approval "Guarantee 1 year or 1,800 hours, whichever comes first, valid for EU area, or subject to confirmation depending on the country of use" CE certificate Subject to prior sale and errors. Images show original consumption data.

Condition: used, power: 127 kW (172.67 HP), fuel type: diesel, lifting height: 20,600 mm, Year of construction: 2011, operating hours: 7,043 h, Technical information Make of engine: Mercedes-Benz Top speed: 36 km/h Empty weight: 17.500 kg Functional Lifting capacity: 5.000 kg Identification Serial number: 769994 Other information Giodpfxjv Rk Sms Ahvjp Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: BKT Transport dimensions (LxWxH): 7.96x2.43x3.05 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2013, operating hours: 8,682 h, power: 164 kW (222.98 HP), gearing type: other, maximum speed: 80 km/h, first registration: 04/2013, color: orange, overall weight: 14,000 kg, mileage: 159,883 km, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle – additional charge €11,500 for Mulag attachments * From first owner * Condition as per photos * Only 8,682 original operating hours * Front and rear PTO shafts * Municipal hydraulics at front and rear * Front mower * Mulag MRS300 boom * Mulag RMK1200 verge mower head * Rear mower * Mulag MHS800 rear boom * with Mulag MK1200 mower head * Municipal and rear hydraulics * Rear three-point linkage Gijdjvhqbcepfx Ahvsp * Mulag MRS 300 verge mowing implement * Ideal for mowing in roadside areas, suitable for both left and right side operation * Front three-point hitch mounting * Reach up to 3.00 m * Powered via front PTO * Electro-hydraulic control * Mower head float * Ground speed-dependent sensing system * RMK 1200 verge mower head * Working width 1,200 mm * Telescopic MHS 800 rear boom mower * Lateral shift 1,600 mm * Left and right reach 8.70 m * Automatic terrain contour following * High-clearance portal for passing obstacles up to 3.90 m * Single-hand control unit with multifunction joystick * Quick-release system * Mulag MK 1200 flail mower head * Total width 1,580 mm * Boom utilization monitoring * Comfort cab with two seats * Air conditioning * Front window heating * Outside temperature display * Comfort driver’s suspension seat * Electrically heated mirrors * JCB PowerShift transmission with three powershift stages * Disc brakes * ABS * Differential lock * Warning beacons * Distant warning indicator * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor (agricultural tractor) * Wheelbase: 3,000 mm * Gross vehicle weight: 12,000 kg * LOF registration When selling to commercial customers and for export (EU and non-EU), the German commercial code applies. If desired, we can provide a quote from our partner workshops for a new TüV inspection. Our offer is generally WITHOUT new TüV inspection, without new DGUV, without new SP, without new UVV. More trucks can be found on our homepage. We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misconceptions regarding condition or suitability for the buyer. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All information provided without guarantee. We assume no liability for errors or erroneous statements in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: excellent (used), functionality: fully functional, power: 67 kW (91.09 HP), operation weight: 9,800 kg, Year of construction: 2005, machine/vehicle number: CAT0432DKWEP01798, excellent condition Gedpfx Aoylmkxehvjip

Condition: used, Year of construction: 2014, operating hours: 9,600 h,

Condition: new, functionality: fully functional, Year of construction: 2025, New mobile concrete batching plant from BLENDPLANTS. Fully automatic, computer-controlled concrete mixing plant for continuous mixing of: - Concrete - Polymer concrete - Flowable fill - Soil stabilization - Cold asphalt On-site concrete production instead of ready-mix delivery! Produce only as much concrete on site as you need! No residual quantities, no wasted raw materials! Various machine sizes available: - Feed capacity from 3.5 m³ to 15 m³ - Output rates up to 70 m³/h for this size (E-Series), up to 120 m³/h for the A-Series - Batch production starting from 100 kg - Mobile or stationary versions - Diesel or electro-hydraulic drives BLEND Automation: - Recipe management Gjdpjtzk Tzefx Ahveip - Delivery note printing - Data export via USB - Remote access We are the exclusive BLENDPLANTS.com representative in Germany. Contact us – we will be glad to provide you with a customized offer. Occasionally, we also have used machines available! Please ask!

Condition: used, Year of construction: 2015, operating hours: 1,200 h, power: 99 kW (134.60 HP), Equipment: air conditioning, all wheel drive, cabin, VAT deductible: Net sales price: €83,800.- Well-maintained Fendt 313 Vario / SCR with original 1,200 hours / operating hours Very good condition 1,200 hours One owner 19% VAT deductible If you have any questions: Christian Hirsch Please try reaching several times, as we are often in customer discussions. * Vario controls * Multifunction joystick with cruise control, engine speed memory, automatic functions, hydraulic control * Varioterminal 7-A with push-button control * Variotronic headland management system * Vario TMS Tractor Management System * Cab * Air conditioning * Full-width front windscreen * Height and tilt-adjustable steering column * Super comfort seat, air-suspended with backrest * Super comfort seat with seat heating * Passenger seat with automatic seatbelt * Aerosol particulate filter * Segmented windscreen wiper front * Interior mirror * Work lights * Engine & Transmission * Reversing function, stop-and-go function * All-wheel drive / differential locks * Comfort switch for all-wheel drive / differential lock * Rear / front differential with 100% multilaminate lock and steering angle sensor * Powershift PTOs * Rear: Flange PTO 540/540E/1,000 rpm * External control for rear PTO * Hydraulic system * Electrohydraulic rear linkage (EHR) * First and second hydraulic valves at the rear * Hydraulic valve actuation via crossgate lever, UDK rear couplings * Front axle weight 60kg * DL supply system / 2-line system * Height-adjustable ball hitch * Roof white * Body paintwork in RAL color * Rim paintwork as requested * Heated rear window * Ventilation * Air conditioning * Air-suspended super comfort seat * Cabin floor mat * Steering wheel with spinner knob * Additional equipment mount * Terminal mount * Mirror mount * Rear view mirror * Mechanical cab suspension * Work lights on front roof TWINPOWER * Work lights fenders * Work lights on rear roof TWINPOWER * VARIO TMS C267 * Rotating beacon * Body color RAL 1032 * Rim color RAL 9006 White Aluminum * 40 KM/H version * MZW 540/540E/1,000 rpm * Double-acting valve 1/1 center right + rear Gedpfx Aew Tqhqohveip * Additional valve DW 1/2 rear * Additional valve DW 1/3 rear * Return flow center right * Top link SK Cat.2 (not present) * Heated pre-fuel filter * Tires: 360/80 R24 138D NO 30 8 W12X24 * Tires: 440/80 R34 155D NO 112 8 DW15L * Tread depth ~ 90% * 1820 mm front track width * 1800 mm rear track width If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try reaching several times, as we are often in customer discussions. Trailer available on request as shown in the last photo (Swopper mover) More offers at Equipment details obtained by a VIN inquiry; technical errors may be possible. The information provided online is non-binding and for description purposes only. They do not constitute guaranteed characteristics. The seller bears no liability for typographical or data transmission errors / changes / input errors. Subject to prior sale and errors.