Firefighting vehicle 4x4x4

Brimont PM ETR Feuerwehr 4x4x4 AHK verwindbarer

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Dkjdoiiipuepfx Akvor Stock dimension width: 15000 mm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 Dksdpfeq Ehpaox Akvjr No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, mileage: 26,455 km, power: 103 kW (140.04 HP), first registration: 02/1998, fuel type: diesel, empty load weight: 4,940 kg, maximum load weight: 2,550 kg, overall weight: 7,490 kg, axle configuration: 4x2, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 9, Equipment: ABS, additional headlights, cabin, differential lock, trailer coupling, Vehicle location: Bovenden, Doka, 1x air seat, switch 5, ABS (anti-lock braking system), differential lock, rotating beacon, storage box, leaf springs, U-protection Construction: Firefighting vehicle LF8/6 with Ziegler construction, built-in pump FP 8/8 & 600l water tank. Sales to businesses or export are subject to 19% VAT! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Dkodpfxovhn Iyo Akvjr - .

Condition: used, mileage: 52,000 km, power: 125 kW (169.95 HP), first registration: 01/1989, fuel type: diesel, overall weight: 11,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Year of construction: 1989, Manufacturer Mercedes Model 1117 4x2 Fire truck - Feuerwehr - Bomberos - Tankspritze Year 1989 Condition Good Serial Number WDB67601215364319 Ref. nr. 927725 Reg. date: Hk: 170 Km: 52.000 Gearbox: 4-speed automatic Diesel tank: 1 Tank liter: 150L Crew cabin: ? Cabin type: Crew cabin Drum brake: ? Tire Size: 245/70R19.5 Cover% left 50% - 90% Front suspension: Springs Dkjdpfsvkz Irox Akvsr Suspension rear: Springs Toolbox: ? Total weight: 11000 Kg Net weight: 7000 Kg Load capacity 4000 Kg Pump: Rosenbauer Pump timer: 834 Ladders: ? Light pole: ? Hose reel: R-Side + L-Side

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized Djdpfx Aoyw Ivhekvekr - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: used, mileage: 27,864 km, power: 96 kW (130.52 HP), first registration: 11/1978, fuel type: diesel, empty load weight: 4,490 kg, maximum load weight: 3,000 kg, overall weight: 7,490 kg, tire size: 8.25R16, axle configuration: 4x2, wheelbase: 3,300 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 2,450 mm, total width: 2,650 mm, Equipment: cabin, Vehicle location: Bovenden, Kz. Haus, switch 5, leaf suspension Wheelbase: 3300 mm Superstructure: Fire-fighting vehicle with water tank from 1st ownership, TLF 8, pump FP 8/8, water tank 2240 liters, Ziegler superstructure, engine 6 cylinders OM 352, top speed 89 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dedevhha Nspfx Akvskr - .