Generator

AKSA AJD 33 EU | 33 kVA Diesel Notstrom Schallgedämmt | NEU 2024

Condition: new, Year of construction: 2023, ENERGY T20000 20.00 KVA/16 KW At 400V 20,00 KVA /// 16 KW At 230 V 16,00 KVA /// 12,8 KW 255 KG L= 970mm W= 680mm H= 955mm Giri/min - speed Dujdpfjipvhkox Afnel 3000 Frequency Hz 50 Voltage 230/400 V Amps 32.0A at 400V 70A at 230V GASOLINE (EURO V) Electric start engine power hp (KW) 32 (23,8) Cylinder 2 Cooling system air Protective measures Low oil level Speed governor mechanical Fuel consumption 75% of load Lt/h 9.8 Tank capacity Lt 65 Voltage control AVR Voltage accuracy % ± 1% * 2 CEE socket 32A 3pole 230V single phase * 1 CEE socket 32A 5pole 400V three phase * 1 12V DC * Voltage selector switch (400V three-phase or 230V single-phase) * LED multimeter: Voltmeter, amperometer, KWmeter, frequency meter and hour meter. Power unit stands on 2 sturdy wheels and 2 legs, and can be moved with them. The handles can be folded to save space. Emergency gensets of the ENERGY Thunder series are not suitable for continuous operation! However, an emergency supply can be established without any problems! ENERGY T20000 Full Service Kit € 78.00 incl. 20%. * Worldwide transport incl. unloading is possible for an additional charge * An invoice with VAT will be issued

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 Djdpfx Aowuddvefnoul C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Dusdpowu Dbujfx Afnel Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 Dedpfx Aoup Hw Eofnjul - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Dodpfx Afoi Nthqsnoul Voltage 230/400V Generator power 16 kW Generator continuous power 14 kW Number of phases 3 ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Rotation speed 1500 rpm. Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 DATAKOM D300 control panel Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Weight 730 kg

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Spindle passage: 80 mm Turning length max: 750mm Turning diameter: 340mm Power: 22kw Duodjh Dzqljpfx Afnel Number of tool holders: 12 Shaft diameter: 40 Powered tools in all positions X axis Z axis C axis Automatic tailstock chip conveyor

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW weight of the machine ca. t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Dujdpfx Aod Iin Eefnol Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood CNC control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, Article: Welding rotary table 50 kg TYPE: KT-50 without jaw chuck Max. Load: 50Kg horizontal Max. Load: 25Kg vertical Rotation speed: 1-7,5 rpm Rotation direction: left and right Face plate speed: manually adjustable Face plate diameter: 315mm height of faceplate: 375mm inclination angle of face plate: 0-90 Motor power in operation: 0,08kw Motor power standby (Kw): NA Duodpfxsbambre Afnsl dimensions: 430 x 430 x 375mm Weight: approx. 38kg Power: AC 110V / 220V 50/60Hz Price is without chuck and height adjustable workbench Surcharge quick chuck 195.-€ Packing and shipping Germany approx. 80.-€

Condition: used, New diesel generator set, power generator, emergency generator RTE Dsdpoxlkq Uofx Afnjul Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: used, bending length: 3100pressure: 80motor power: 5,5oil filling: 100 Duedpfx Asru Unbefnsl