Agrobest Grup Tarım Ilaçları

Condition: used, belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with infeed belt Dodpjzza Afjfx Albocl mobile dimensions (l x w x h) : ± 2.500 x 800 x 1.200 mm

Condition: used, Year of construction: 1995, Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14”–26” Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24” printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind shaft • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening Die Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and perforation station including: o Common paper infeed with pull wheels o Length perforation o Space for two file-hole groups o IMR block with duplex sprocket punching (245–485 mm) o Pile marking device Dcsdpfxozzaz Uj Albol o Length slitting o 24” file-hole punch unit o Common anvil cylinder for two cross-perforation cylinders up to 28” o Variable zig-zag folder (5”–16”) o 2 × 24” cross-perforation cylinders Control & Equipment: • Main drive motor frame • Press control panel • Main electrical cabinet • Plate bender

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Low operating hours, as it was used exclusively for testing purposes. Very good condition. Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Dcodpfx Aszzaz Ijlbsl Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015.

Condition: used, completely stainless steel Suitable for direct steam injection (4 points at the bottom of the conical base) Operating temperature 125°C Operating pressure 2.5 bar Insulated (bottom + walls) Manhole DN500 Dcsdpfszzazzox Albjl Internal diameter 2,000 mm Boiler height with closed lid ± 3.000 mm Boiler height with open lid ± 4.150 mm Suitable for CIP Total volume of contents 4,840L Total dimensions: (L x W x H): ± 3.000 x 2.400 x 3.200 mm Hydraulically operated lid + Hydraulic unit in good condition electric control box not included

Year of construction: 2018, condition: excellent (used), Vötsch VT³ 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Year of Construction: 2018 Machine Type: Temperature Shock Test Chamber / 2-Chamber Shock Test System Test Chamber Volume: 125 liters For sale is a used Vötsch VT³ 7012 S2 temperature shock test chamber with a 2-chamber system and programmable touch panel control. The system was developed for rapid and abrupt temperature changes and is particularly suitable for Environmental Stress Screening (ESS), environmental simulation, electronics and component testing, research and development, as well as quality assurance. The test specimen is transported between the hot and cold chambers via a vertically moving transport carriage. Technical Data: Temperature Range, Hot Chamber: +50 °C to +220 °C Temperature Range, Cold Chamber: -80 °C to +70 °C Test Chamber Volume: 125 liters Number of Chambers: 2 Max. Test Weight / Carriage Load: 50 kg Refrigeration Unit: water-cooled Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: Refrigerant 1: R449A Refrigerant Quantity: 1.70 kg GWP: 1,397 CO₂ Equivalent: 2.37 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Refrigerant 2: R23 Refrigerant Quantity: 1.27 kg GWP: 14,800 CO₂ Equivalent: 18.80 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Standby Pressure: 14 bar g Dimensions: Test Chamber (W × D × H): 470 × 650 × 410 mm External Dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required Room Height for Operation: approx. 2,450 mm Equipment: 2-chamber temperature shock system Vertically moving transport carriage Programmable touch panel control CONTROLPAD for status display Observation window Test chamber lighting Cable gland Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / Remaining time display USB and Ethernet interfaces Application Areas: Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Dcedpfxjzzazuo Albel Assembly testing Material testing Quality assurance Research and development Reliability testing Life and stress tests Transport Data: Dimensions (L × W × H): approx. 2,350 × 970 × 1,985 mm Weight: to be determined Transport by freight forwarder Condition: Used Optical condition as shown in the pictures. Scope of Supply: Vötsch VT³ 7012 S2 temperature shock test chamber Touch panel control Equipment and accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X388H01012, Year of construction: 2017, operating hours: 8,573 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,000 kg Lifting height: 4,100 mm Overall height: 2,904 mm MACHINE DETAILS Mast type: Simplex (standard mast) ISO class: 3 (2,500–4,999 kg) Dcedpfx Alozzaznjbsl Drive type: Electric Battery voltage: 80 V Operating hours: 8,573 h EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve Heater Full cabin External reference: SL8148SLO

Condition: used, Conical bottom Diameter: 1.500 x 1.500 = capacity 3.000 L total height: 2.800 mm Manhole diameter: 500 mm Pressure -1/3Bar Operating temp. 200°C Stainless steel 316L Motor SEW 0,9 kW-31 rpm/1,8 kW-64 rpm 400V Suitable for CIP Suitable for direct steam injection Dcedpfjzzazhjx Albol Suitable for vacuum With agitator Switch cabinet not included Installation frame not included

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 20 h, load capacity: 230 kg, platform length: 1,400 mm, platform width: 700 mm, arm reach: 7,500 mm, working height: 16,000 mm, For sale: a like-new tracked aerial work platform with only 20 operating hours! TECHNICAL DETAILS Working height: 16 m Lateral reach: 7.5 m Outrigger base width: 3 m Dodpfx Aljzzazbjbecl Platform size: 1,400 × 700 mm Platform load capacity: 230 kg Rotating platform MACHINE DETAILS Operating hours: 20 h Weight: 2,450 kg EQUIPMENT Home function Outrigger pads Radio remote control White tracks

Condition: used, all stainless steel nett width 600 mm Motor “JVM GmbH & Co.KG”, Type MS 8 400V, 25 Hz power: 0,80 kW Dcodpfx Alezzay Rsbsl Grill opening: dia. 30 x 10 mm dimensions (L x W x H) : ± 3.340 x 970 x 1.100 mm

Condition: ready for operation (used), Year of construction: 1996, Brand: UpRight Model: MX19 Year of manufacture: 1996 Maximum working height: 7.98 m Dcodpfx Aszzaywelbel Maximum platform height: 5.8 m

Condition: used, nett width 500 mm dimensions: ± 3.000 x 800 x 1.200 mm aluminum step: ± 2.150 x 700 mm gutter length: 2.300 mm loading height: ± 1.200 mm motor stainless steel 400V, 50 Hz Power: 5.20 A output height: ± 700 mm 1 vibration motor Shock absorbers Vibro feeder completely stainless steel Vibro gutter chassis steel + aluminium Dcedpfxszzayqe Albel Opening grid: 4 mm and 8 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 5,675 h, machine/vehicle number: CAT0966HTA6J00259, USED CATERPILLAR WHEELLOADER MODEL : 966H S#CAT0966HTA6J00259 YEAR : 2007 Dcodpezzayksfx Albsl HOUR : 5667

Condition: used, all stainless steel nett width 450 mm motor Type MS 6-25 HZ power: 0,7 kW Grill opening: dia. 10 mm dimensions : ± 2.900 x 750 x 600 mm 380-440V, 50 Hz GN 205,5 kg Dcedpfezzaydox Albel

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR300 5AX. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, Renishaw probing, 30 Station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 410 mm, Y Axis 610 mm, Z Axis 500 mm A Axis +30° to -120°, C Axis Continuous 360° TABLE: Diameter 300 mm Max Swing Diameter 300 mm, Max Weight on Table (evenly distributed) 100 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 FEEDRATES: Rapid and Jog (Max.) 36 m/min Cutting Feed Rate (Max.) 20 m/min Rotary Axis Speed 25 rpm BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm Dedpfx Alezzax Tsbscl TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Through Spindle Coolant Coolant Flow Rate at Cutter 160 L/min Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X410 Y610 Z610 mm A360| 12000RPM | BT40 Accessories: 5 axis Table, Renishaw Probing, Side Mount Tool Changer, Swarf conveyor

Year of construction: 1994, condition: used, Bottling line - Mustard and horseradish packaging Dcsdpfx Alezzax Hobjl The line consists of: 1. Piston filler - KUPER 2. Machine for closing jars 3. Bottle filler - NOVOPACK 4. Machine for separating jars 5. Transporters

Condition: used, all stainless steel nett width 450 mm 2 motors “JVM GmbH & Co.KG”, Type JD 5 power: 2 x 70 W 230V, 50 Hz Dodszzaxtspfx Albjcl GN 11,85 kg Grill opening: dia. 10 mm dimensions (L x W x H) : ± 1.400 x 500 x 410 mm

Condition: used, all stainless steel nett width 450 mm Motor Type MS 6 - 25 HZ 380 - 440 V Dodpfx Aszzaxmslbocl GN 128,50 kg dimensions : ± 2.060 x 750 x 600 mm Opening for filter or sieve No base/frame

Condition: ready for operation (used), Year of construction: 1991, Make: Bergman Model: PS 8100-29 Year of manufacture: 02/1991 Machine weight: 800 kg Machine dimensions: 220V connection Dcsdpfxezzaxgo Albel Video available upon request.

Condition: used, all stainless steel nett width 430 mm motor type JVM MS 6-50 Hz 380-440 V / 9,5 A/ 50 Hz Grill opening: dia. 8 mm Dedpfxezzaw No Albscl dimensions (L x W x H) : ± 2.600 x 750 x 700 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, Used FELDER CF 731 S Professional combination machine, manufactured in 2000. Compact and versatile woodworking machine with a panel saw, table router, jointer, and thickness planer. The machine features a sliding table with a cutting length of approximately 2,700 mm, as well as a large extension table with a rip fence. The planing unit is equipped with a 4-knife cutterhead. The router spindle is pivotable and has a router fence with a protective cover. Thanks to its extensive features, the machine is particularly suitable for carpentry shops, joineries, and smaller workshops. Technical data / Equipment Manufacturer: FELDER Type: CF 731 S Professional Year of manufacture: 2000 Machine No.: 80-02/140-00 Voltage: 400 V Frequency: 50 Hz Motor power: 4 kW Rated current: 8.6 A Speed: approx. 3,400 rpm Panel saw: Sliding table Cutting length approx. 2,700 mm Extension table Rip fence with measuring scale and fence flap Parallel fence Saw unit pivotable Height adjustment via handwheel Table router: Pivotable router spindle Router fence Router guard Height and angle adjustment Dust extraction connection Dsdpszzaw Ajfx Albjcl Jointer/Thickness planer: 4-knife cutterhead Jointer fence Jointer tables can be folded up Thickness planer Mechanical height adjustment The machine is in used condition with corresponding signs of wear. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 837014, total width: 1,900 mm, total length: 3,600 mm, total height: 1,990 mm, outer diameter of label roll: 300 mm, inside diameter of label roll: 76 mm, input voltage: 400 V, Two-sided labeler 362E Machine direction of operation from left to right, as viewed from the operator side. - Base frame made of aluminum profiles - Machine is mobile - Equipped with the HERMA 500 labeler, carrier tape width 244 - Electrically and mechanically prepared for the integration of a thermal transfer printer - Belt conveyor, length approx. 3,160 mm, width 100 mm - With singulator and chain aligner - Top belt, length approx. 1,568 mm, width 25 mm Dedozzawvopfx Albocl - Label presence control via color sensors - Control panel mounted on a column at the machine infeed Control system with Siemens TP 700 Further information upon request. Additional demonstration machines are regularly available in our standard range. We would also be happy to invite you to our showroom to get to know the machines during a visit or live demonstration. Please bring your own products with you so that we can demonstrate the application in a practical way under your individual conditions.

Condition: excellent (used), Year of construction: 2024, operating hours: 1,200 h, functionality: fully functional, Offered: Sinker EDM machine genius750NOVA + connection Chameleon Linear - 120 electrode positions - 6 pallet positions 400x400 Sinker EDM machine genius 750 NOVA Right-hand configuration Control panel on the right, automation possible from the left side! * Travel ranges X * Y * Z: 420mm * 420mm * 400mm * Work table: 600mm * 600mm * Work table T-slots: number / width / spacing: 6 slots / 10mm / 83/100/100/100/83 * Controlled C-axis with n = 45 1/min * High retraction speed due to acceleration of 10 m/s² in Z and 20 m/min travel speed Generator * genius IPMtec, with comprehensive technology package for graphite, copper, and tungsten copper for machining all materials commonly used in tool and mold making * max. working current 52A, optional 100A or 196A (with 96A booster) Control system * Internal control computer with 1.2 GHz RISC CPU, 64-bit * Industrial PC with user interface, based on Win 10 * 22“ touchscreen, keyboard, mouse and handheld unit for setup with joystick, handwheel and touch display * Connections: LAN, USB, RS-232 Connection values * Electrical: 6 kVA, 400V, 50Hz * Pneumatic: 6 bar, 10 l/min * Required cooling capacity: 4.5 kW for cooling of dielectric fluid and control cabinet Chameleon base unit consisting of: * Robot Dodezzawpspfx Albecl * ZK’s own robot controller * 1 guide rail * 1 base magazine without magazine levels with rack and pinion drive Chameleon expansion magazine including base plate and glass sliding door set (magazine positions not included)

Condition: excellent (used), Special opportunity – ideal also for aid organizations and crisis areas! From the assets of the federal government, we can offer you this top-condition intensive care ventilator, type LTV 1000, from the world-renowned brand "Breas" or "Pulmonetic," as a complete system! The LTV 1000 is one of the best-selling systems worldwide for mobile medical intensive care ventilation and is particularly distinguished by its compact design and robust technology. It handles almost all ventilation types and operates fully automatically. It is also ideally suited for both adults and children and can be operated temporarily using the built-in batteries. Due to its compact design and low weight of approximately 6 kg, the device is also ideal for use in rescue helicopters or ambulances. Thanks to the integrated screen, the system can operate completely independently; no additional computer or similar is required. The device sets were primarily designed for use in mobile field hospitals and clinics and are stored in special Zarges boxes, including all accessories. They are in top condition and have generally only been put into operation for testing purposes – no commercial use has taken place, everything is in perfect, undamaged condition – see pictures. All devices have been tested for functionality, pass the self-test without any restrictions, and were equipped with new batteries in August 2026. Scope of delivery: - Pulmonetic LTV 1000 intensive care ventilator - Device trolley - Screen - Power supply unit - Hoses and connections - Documentation in German and English - Zarges aluminum box For the sake of clarity, we would like to explicitly point out that in the case of professional use, the legally required maintenance/inspections, e.g. MTK/STK, must be carried out again. The total weight of the system, including accessories and pallet, is approximately 70 kg! Insured shipping via a freight forwarder is possible for an additional charge. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; a direct commercial sale to private individuals is expressly not possible! The price refers to one system each, including all items listed in the scope of delivery – see pictures. The goods are sold excluding any warranty or liability for defects. The exclusion does not apply to claims for damages arising from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, or health. Dedpfx Alezzawiebscl Please do not hesitate to contact us at the address provided if you have any questions regarding prices or technical details.

Condition: used, Year of construction: 2008, operating hours: 58,000 h, functionality: limited functionality, overall weight: 1,150 kg, power: 45 kW (61.18 HP), volume flow: 7.28 m³/h, pressure (min.): 4 bar, pressure (max.): 9.8 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Premium screw compressor Atlas Copco GA 45+ FF Volumetric flow rate: 121.4 l/s or 7.28 m³/min Max. operating pressure: 9.8 bar Dcedpfszzav Sjx Albjl Product description according to the manufacturer: GA45+AFF-10 APB 400 50 RIF Product number: 8152553718 Date of manufacture: 23/05/2008 Model: GA45PLUS_1 Product description: GA 45+ Current operating hours: approx. 57,000 hours Last major service with oil and filter replacement and overhaul of all valves and condensate drains in March 2026 at 56,800 operating hours. The compressor is functioning. The integrated refrigerant dryer does not reach the pressure dew point of 3°C (operates at 10°C). The source of the fault has not been investigated; therefore, no further information can be provided regarding the cause and repair requirements. For continued operation, it is recommended to repair the internal dryer or use an external dryer. Used equipment, sold as is, without warranty. More pictures will follow. For the photo, the doors were removed, but they are still available.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, number of axes: 3, Plasma cutting machine manufactured in 2007. This MicroStep SPLR-P features a Kjellberg HiFocus 160i PLUS plasma power source, offering a cutting current range of 10A to 160A. It includes an integrated CNC operator terminal for precise control and a filtration system by Donaldson Torit DCE. If you are looking to get high-quality plasma cutting capabilities, consider the MicroStep SPLR-P machine we have for sale. Contact us for further details. Dcodpfxezzav Es Albjl - Voltage (Sp.): 400 V 50/60 Hz- Power Rating: 3 kW- Plasma Power Source Brand: Kjellberg Finsterwalde- Plasma Power Source Model: HiFocus 160i PLUS- Plasma Power Source Serial / Art. No.: Art.-Nr. 11.033.702 / 07057- Plasma Power Source Specifications: - Open Circuit Voltage (U0): 330 V - Mains Voltage (U1): 400 V (3~ 50 Hz) - Max Current (I1max): 47 A - Effective Current (I1eff): 47 A - Power / Pressure: P1/min = 0.7 kW, Pmax = 0.5 MPa - Cutting Current Range: 10A / 84V - 160A / 144V - Duty Cycle: 100% at 160A / 144V; 100% at 25A / 90V - Power Source Mass: 196 kg - Protection / Insulation Class: IP 22, . F - Cooling Type: AF- Gas Console / Control Units: Kjellberg PGC and PGV 1- Torch Systems / Cutting Heads: - 1x Plasma Cutting Head - 1x Oxy-fuel / Flame Cutting Head- Control Console: Integrated CNC operator terminal with keypad and display- Filtration / Dust Extraction System: Donaldson Torit DCE