Mos

Condition: good (used), Year of construction: 2009, machine/vehicle number: 130, functionality: fully functional, power: 4.4 kW (5.98 HP), input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 40 mm, edge thickness (max.): 2 mm, height adjustment type: mechanical, feed rate X-axis: 7 m/min, actuation type: electric, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, overall weight: 400 kg, year of last overhaul: 2026, Equipment: CE marking, with hot-melt glue application onto the workpiece, suitable for edge material up to 2 mm, workpiece height approx. 10 - 40 mm, maintenance-free glue pot, ready for operation in approx. 3.5 min, HF cross-cutting station (12,000 rpm), HF milling station (12,000 rpm), incl. carbide tool, feed rate approx. 7 m/min, extendable workpiece support, working table height approx. 900 mm, extraction nozzle D = 100 mm, weight approx. 400 kg, power consumption 4.4 kW, 400 volts. Sale in 'as is' condition as inspected, ex location Seevetal, without freight and packaging, subject to prior sale. Godsyuff Hepfx Ahvotw

Condition: used, Felder G680 edge bander, pre-milling cutters, glue application by roller, pneumatic pre-cut guillotine, pressure rollers, finish-trimming saws, top-bottom milling unit R1 – R2, corner rounding unit, profile scraper, flat scraper, polisher. Edge thickness 0.4–3 mm, max panel height 50 mm, total power requirement 7.22 kW, machine length 405 cm. The corner rounding unit requires inspection as it is not functioning properly. Godpsyufawsfx Ahvstw

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Gjdpfx Aeyud S Eshvstw Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs - Production according to processing programs - Data backup of processing programs

Condition: good (used), Year of construction: 2007, machine/vehicle number: 1386, functionality: fully functional, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, year of last overhaul: 2025, Hebrock Edge Banding Machine AKV 3003 DK F Edge banding machine with hot melt adhesive application to the workpiece for edge material up to 8 mm and joint trimming including DIA tools - ergonomically positioned control panel - easy adjustment options from the operator’s side (digital displays) - maintenance-free quick heat-up glue pot - robust chain drive - high-frequency crosscut saw (300 Hz) - high-frequency flush milling station incl. tool fitting and fine adjustment from the operator’s side - automatic edge feed - safety and noise protection hood - extendable workpiece support - electronic temperature controller Gedpfeyud Sfsx Ahvstw - pneumatic end trimming for up to 3 mm edge thickness and 60 mm edge height - double roller upper pressure - signal lamp for workpiece tracking - aggregate viewing window from operator and rear side - CE-compliant safety standard complete with: - surface scraping unit - corner rounding cutter - 8 mm edge thickness Workpiece height approx. 10 - 40 mm, Feed rate approx. 10 m/min, Power consumption 11 kW (31 A) 400 Volt, 50 Hz, Length approx. 4300 mm Weight approx. 1250 kg Sold in current condition as inspected, ex location Seevetal, excluding freight and packaging, sale subject to prior sale.

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 380 V, input current: 36 A, input frequency: 50 Hz, type of input current: three-phase, actuation type: electric, overall weight: 3,200 kg, compressed air connection: 7 bar, Equipment: CE marking, For sale: a true workhorse. This machine isn't afraid of hard work or a tough hand. It's an old-school machine renowned for its reliability. Gtedoyudkuopfx Ahvsw

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Biesse Winstore 3D K1 automatic storage and loading system for panels, complete with control panels and transformers. Handling system: Automatic, suction cup-based, installed on gantry. Automatic storage and loading warehouse, approx. 50x10 m. Gedoyt Sxdspfx Ahvjtw Available optionally with surcharge: Biesse Selco WN6 TwinPusher. Available end of 2026.

Condition: used, Year of construction: 2009, Used BIESSE ARTECH edge bander, model Akron 430 A T Technical data: - Minimum/maximum panel length: 140-3200 mm - Minimum/maximum panel width: 85-3200 mm - Minimum/maximum panel thickness: 10-60 mm - Minimum/maximum edge thickness (rolls): 0.4-3 mm - Minimum/maximum edge thickness (strips): 0.4-8 mm - Minimum/maximum edge height: 14-64 mm - Working height: 900 mm - Panel protrusion from feed track: 25 mm - Feed track speed: 12 m/min - Dust extraction air speed: 30 m/sec - Supply air pressure: 7-10 bar SINTRA LT control Entry guide with mechanical viewer -Trimming unit: 2 motors, 1.8 kW each, with pad followers Vertical adjustment for tool position -Gluing unit: glue pot capacity 2 kg 3 air-operated pressure rollers Digital edge thickness viewer -Shear unit with 2 push pressure positions depending on edge thickness -Automatic strip edge loader -End trimming unit: 2 motors, 0.50 kW each, with pad followers, 2 selectable cutting angles (0°-15°) automatically adjustable from control panel (to increase edge overhang or trim for best finishing) -Multifunction corner rounding unit with 4 selectable positions from control panel Possible operations: straight, bevel, radius1, radius2 For each finishing position, +/- edge overhang can be selected -Edge scraper unit -Glue scraper unit Program creation for different finishing options Machine length: 3880 mm Godpfoyt Nvgex Ahvotw Weight: 1530 kg

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) Gtjdpjyt Izbofx Ahvsw In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: new, Edgebander Casadei Industry E350PM PRE-MILLING UNITS glue application pneumatic pre-cut guillotine pressure rollers front-rear trimming Gedpfx Asyt H Nqshvetw top-bottom milling unit R1 – R2 flat scraper polishing unit machine length 230cm, with table 280cm feed speed 7m/min max edge thickness 2mm max working height 45mm Brand new machine, European manufacture. Can be tested prior to purchase, available immediately.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-261-20-3530, functionality: fully functional, Availability: Immediately - End of March Second glue pot and interchangeable profile heads included Year of manufacture: 2008 Edge thickness (strip material): 0.4 - 12 mm Edge thickness (coil material): 0.4 - 3 mm Workpiece thickness: 8 - 60 mm Control: PC 20+ Feed speed: 10 - 18 m/min Infeed fence: Motorized SPS Gtodeyt Efdspfx Ahvow Electro-pneumatic infeed lock Electric pressure bridge adjustment via SPS Jointing unit: counter-rotation and co-rotation incl. DIA cutters Glue application: Quickmelt system incl. 2nd glue pot Pressure unit: 1 driven pressure roller, 3 follow-up rollers, motorized adjustment via SPS End trimming unit for front and rear trimming, pneumatically swiveling 0 - 12° Milling unit for longitudinal edges flush / bevel / radius, adjustment via SPS Corner rounding unit with 2 motors Radius scraper unit with additional profile heads Flat scraper Machine length: 6,260 mm

Condition: excellent (used), Akzent edge banding machine V31 - Dimensions: 1750 x 530 x 600 mm - Plus additional 600 mm Ø roller table - Milling motor with disc cutter - Workpiece thickness: 10-55 mm - Edge thickness: 0.4-1 mm - 220 Volt - 3.3 kW Gedeytw Ttopfx Ahvetw - Weight: 135 kg

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, power: 25 kW (33.99 HP), workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, Equipment: CE marking, TECHNICAL DETAILS Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting Number of motors: 2 Section 3 Work step: Edge milling Gtodjytr Rgspfx Ahvjw Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Corner rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ('as seen and agreed'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Gjdpfxsytr Hbo Ahvjtw Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edgebanding: between 8 and 60 mm, Edge thickness up to 8 mm depending on the unit Configuration: -calibrating, -edge feeding, -glue application, -end trimming, Gjdpfx Aeytp Hrohvjtw -milling group; flat or profile milling of upper or lower edges, -profile milling unit, -scraping group, -polishing station Pressure beam, feed stop, control panel Year: 2017

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment/features: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with cutter (for cuttable edges) - Three pressure rollers - Belt feed motor 0.25 kW; approx. 1250 mm length; feed rate approx. 6.0 m/min; 50 mm wide timing belt with thick, workpiece-friendly rubber coating. Digital counter for height adjustment - Direct glue application to the workpiece: leakproof glue pot with glue supply from below and fast heat-up time after machine stoppage - Flush trimming unit for front and rear workpiece edges, automatic sensing at the workpiece, pneumatic trimming with a cutter for cuttable edges Godpfx Ajytkiushvstw - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 high-performance 0.4 kW high-frequency motors, continuously adjustable from 4000 to 18000 rpm, cutter diameter 70 mm, Z4, radius 2 mm/15°; central extraction connection Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm (without film disc Ø 800) - Net weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: AH/115881, functionality: fully functional, overall weight: 2,364 kg, Equipment: documentation/manual, Element thickness: 60 mm Edge thickness: 8 mm Feed speed: 18 m/min Soundproof cabin: Yes Glue tank: Yes Touchscreen control (10 inches) Height adjusted manually from the control panel 4-axis milling machine, manually operated from the panel Cross cutting Two wrapping units, profile scraper Gsdpfx Ahjytkczjvstw

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Gsdjythxmopfx Ahvjtw Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) Gtsdpfx Aeytf Irjhvew • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool • Height adjustment via top pressure • PVC shavings separator top/bottom

Condition: good (used), Code: 0367 Brand: SCM Model: BASIC 1 Automatic edge bander for wood edges, Pvc, melamine, Abs Technical data: Working height mm 8 - 40 Gtjdpoytfnfofx Ahvow Banding material thickness mm 0.4 - 3 Feed speed 8 mt/min Min. panel length mm 140 Min. panel width mm 60 End cutting unit : Rotation speed rpm 10000 - Motor power Kw 0,6 End trimming unit: Rotation speed rpm 27000 - Motor power Kw 0.5 - Tilt of cutters 12 degrees Working pressure Atm 6 Overall dimensions: mm 1700 x 700 x 1250 h Weight kg 470

Condition: excellent (used), Working area: 225 cm x 120 cm Gedjytdhdopfx Ahvjtw golden shelves

Condition: used, Year of construction: 2002, functionality: fully functional, - Machine for complete processing and solid wood edge gluing up to 25 mm - Heavy-duty machine weighing approximately 3,000 kg - Still in operation and fully functional - Overall length approx. 8,100 mm Gsdpfx Asytcqwjhvstw For a detailed description, please see the attachment, model UNImatic 25.7-F!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Brandt KDF 430C edge banding machine for sale in very good condition! EDGE THICKNESS: 0.4-8 mm WORKPIECE THICKNESS: 8-60 mm with motorized height adjustment FEED RATE: 11 m/min TOTAL LENGTH: 4770 mm Radius scraper with pneumatic adjustment Surface scraper Gsdpfxoytb Smo Ahvotw Buffing unit

Condition: excellent (used), Edgebander ME35TR Pre-milling cutters, Plate pre-heating lamp Glue application by roller, Glue pot with exchange function Pneumatic pre-cut guillotine, Pressure rollers, Combination unit featuring: - flush trimming - corner rounding Gsdoytbuujpfx Ahvotw Top/bottom milling unit R1 – R2, Profile scraper Flat scraper, Machine length 320 cm, Feed speed 7 m/min, Max workpiece height 50 mm, Max edge thickness 3 mm, Used machine, condition very close to new Only 1600 m processed

Condition: used, Year of construction: 2005, machine/vehicle number: 0-261-06-3662, functionality: fully functional, operating hours: 6,635 h, power: 16.2 kW (22.03 HP), input voltage: 24 V, input current: 35 A, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, actuation type: electric, We offer this used Brandt KDF-670 edge banding machine, year of manufacture 2005. Technical specifications: Manufacturer: Brandt Kantentechnik GmbH Model: Brandt KDF 670 Year: 2005 Workpiece height: approx. 8 – 60 mm Edge thickness: approx. 0.4 – 8 mm (depending on material) Feed speed: approx. 11 m/min Glue system: Hot-melt adhesive (EVA) Edge material: ABS, PVC, melamine, veneer, solid wood strips Operation: Control panel on the machine Aggregate equipment: - Jointing unit - Glue application with gluepot - Pressure section with multiple pressure rollers - End trimming unit (front / rear) - Flush trimming unit - Radius trimming unit Gtedpfxjyr S Eno Ahvow - Scraper unit (radius / flat) - Buffing unit Condition: Used machine Fully functional, with age- and use-related signs of wear Other information: Machine inspection under power possible by appointment Loading possible by arrangement. If you have any questions or require further information, please do not hesitate to contact us by message or phone.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Used edge banding machine SCM - Model: Olimpic K360 T-ER1 - Very good condition. - Immediately available Gedsyrr Naepfx Ahvstw - Video on request - Year of manufacture: 2016 - High-end configuration (2 extra glue pots)