Poulad Sanat

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 5,807 h, load capacity: 2,000 kg, fuel type: electric, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 546 kg, total length: 1,700 mm, total width: 720 mm, fuel: electricity, JUNGHEINRICH EJE 220 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.000 kg Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V Charger: ohne, without Tyres: Polyurethan Mono Service weight: 546 kg Length: 1.700 mm Width: 720 mm Year of manufacture: 2012 Operating hours: 5.807 h Condition: working condition Nedpfx Age Afwxve Islh Internal no.: 1309299 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Code: 0507 Brand: SCM MINIMAX - ITALY Model: CU 350 K - CE Standard Universal 5 works combined machine for joinery workshops, craftspeople, furniture makers, bespoke furnishings, doors, wooden joinery, DIY, panels and various applications – CE Standard Technical data: Base consisting of a single, fully welded steel monoblock Cast iron worktable Wide worktable surface area Three-phase motors V 380/50 Hp 3 each Surface planer: Working width 350 mm Total length of tables 1800 mm Nedps Afwxlefx Ag Islh N° 3 blades Anodised aluminium guide adjustable from 90° to 45° Thickness planer: Table dimensions 600 x 350 mm Max/min working height 230/3 mm Max removal depth 5 mm Spindle moulder: Spindle length 136 mm Max rotational speed 8000 rpm Max tool diameter extending below the table 180 mm Circular saw: Carriage made of anodised extruded aluminium with a sliding system on steel guides Carriage stroke 1500 mm Max blade diameter 300 mm Blade tilting 90°–45° Cutting width at parallel guide 900 mm Squaring frame complete with guide, stops and a guide adjustable in both directions from 90° to 45° for angled cuts on panels Workpiece clamping presser N° 3 suction inlets diameter 120 mm Overall dimensions of assembled machine mm 2000 x 2400 x 1100 h Transport dimensions mm 2000 x 1400 x 1200 h Weight kg 600

Condition: used, Drum Chipper Bruks 802 CM Drum chipper by the Swedish manufacturer Bruks Mekaniska AB (Arbrå, Sweden). Suitable for sawmill offcuts, edgings and other wood residues. Technical data: Manufacturer: Bruks Mekaniska AB (Sweden) Type: 802 CM Serial no.: 6710-214 Capacity: 30–60 m³ chips/h Nsdpfxj Afwxbs Ag Iolh Main motor: 75 kW Drum diameter: 800 mm Number of knives: 2 Infeed opening (W × H): 540 × 300 mm Max. solid wood thickness: 250 mm Drum speed: 720 rpm Feed rollers (upper/lower): 2/4 Feedwork power: 2.2/5.5 kW Weight: 3600 kg Dimensions (L × H × W): 2195 × 1650 × 1695 mm

Condition: used, total height: 3,200 mm, total width: 3,250 mm, total length: 4,500 mm, Colour: Green Empty weight: 6.000 kg Price: On request - Drive system: Conventional - Model portal milling machine: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 Nedpfx Aj Afww Ssg Ijlh - Z-axis travel [mm]: 1000 - Table length [mm]: 2200 - Table width [mm]: 1500 - Tool holder: SK40 - Options: Digital readout - Transport dimensions: 4500mm x 3250mm x 3200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2011, Bertuetti dough divider for loose dough and ciabatta - Universal model - Year of manufacture: 2011 - Electronic control - Stainless steel housing - 2 cutting rollers included - Good technical condition Nodo Afww Hopfx Ag Ijlh - Machine inspected and cleaned - Collection from warehouse / shipping option available - Price upon request

Condition: used, Belt Conveyor KJ Maskinfabriken KA69B-550B Nodpfj Afwwvex Ag Ielh Belt conveyor with a stainless steel frame, made in Denmark (KJ Maskinfabriken A/S, Esbjerg). Side guides on both sides. Technical data: Manufacturer: KJ Maskinfabriken A/S (Denmark) Type: KA69B-550B Year: 1983 Length: ~4.3 m Frame: stainless steel Drive: Interroll drum motor Emergency stop switch: Schneider Electric Connection: 400 V plug

Condition: used, Year of construction: 2013, Ashton Industrial model AIS-3350/XDIA D Refurb Edge Detection Unit/Arriser. Serial no: 8343 (2013) Nledj Afwwgspfx Ag Ish Location: These lots are located in Wellingborough, Northamptonshire, UK

Condition: good (used), Pretzel or bagel forming machine - used - shapes a portion of dough into a ring as a further step in forming a pretzel or bagel - made of stainless steel - 400 V power supply - inspected and cleaned - collection from warehouse / shipping option available - price on request Nlodpfx Ags Afwv So Ijh

Year of construction: 2008, condition: good (used), Bread slicing machine PS Mako - Rianta BFS 500H-C model - Used - Year of manufacture: 2008 Nsdpo Afwvvjfx Ag Ielh - Semi-automatic packaging machine, SL 400 model - Computer-controlled - Good technical condition - Collection from warehouse / shipping option available - Price upon request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 1769072, load capacity: 10,000 kg, working height: 10,000 mm, Equipment: documentation/manual, DEMAG 10,000 KG double-girder overhead crane. - Span: 19,905 mm - Lifting capacity: 10,000 KG - Lifting height: 10 m - Year of manufacture: 1994 Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane isn't exactly what you're looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our inventory is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes Njde Afwvqspfx Ag Iolh - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Vahle conductor systems Keywords: overhead crane, bridge crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00741, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.09. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.09 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.08 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Nlodpj Afwvgefx Ag Ish Teach Pendant Cable Length (m): 12

Year of construction: 2023, condition: used, Yinrui (Anhui Yinrui Intelligent Technology Co Ltd) model YR-4228 Automatic Glass Loading Machine. Serial no: 232839 (2023) Size: 4400 x 3150 x 900mm 6- heavy duty feed racks Yinrui (Anhui Yinrui Intelligent Technology Co Ltd) model YR-4228 automatic glass cutting machine. Serial no: 233104 (2023) Size: 5000 x 3400 x 900mm with edge detection Yinrui (Anhui Yinrui Intelligent Technology Co Ltd) model YR-4228 glass breaking table. Serial no: 232879 (2023) Size: 4200 x 3000 x 900 Nledpfxo Afwu Sj Ag Ieh Location: These lots are located in Wellingborough, Northamptonshire, UK

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013056, empty load weight: 3,290 kg, maximum load weight: 9,800 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 05/2023, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 1,060 mm, total length: 9,690 mm, total width: 2,550 mm, total height: 3,580 mm, suspension: air, tire size: 235/75 R17,5", color: yellow, Please note: the images are archive photos. The vehicle may be in use! #Chassis centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly inclined, new design with "Load-Lock-Profil" for lashing straps - 1 pair of geared landing legs at front, straight lower section, one-side operation on the right in direction of travel - Side door stays, steel underrun protection - Anti-spray mud flaps on last axle only, rear impact protection - Spare wheel carrier (1 wheel) with fastening kit - Platform height 1060 mm #Towing equipment - Drawbar with approved 40 mm drawbar eye, haulage version - Drawbar height mechanically adjustable via threaded spindle, below floor level, max. range 200 mm - Drawbar length mechanically adjustable approx. 1950 - 2300 mm, lockable approx. every 50 mm, set to approx. 2100 mm #Axles + suspension - BPW axles at manufacturer's choice, tapered roller bearings, S-cam brakes Nlods Afwuzjpfx Ag Ieh - Axles/running gear laser-aligned: reduces tyre wear and fuel consumption - Air suspension #Braking system - 2-line compressed-air braking system, colour-coded lines for easy servicing, spring-brake parking brake - Duomatic connection at front, with connecting line to the truck - EBS, electronic braking system with EBS connector at front - Please note: only to be towed by vehicles ensuring ABS effectiveness! - Raise/lower valve, vehicle stability system #Wheels and tyres - 235/75 R17.5, make at manufacturer's choice, steel rims, factory silver #Electrics - 24 V, multi-chamber lamps - Yellow LED side lighting, also coupled with indicators (flashing side marker lights) - 2 white front position lights, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front - 2 additional LED work lights at rear, switched via reversing light #Floor - Film-faced plywood approx. 30 mm, for high point loads - Premium floor sealing, floor jointed all round - Platform length approx. 7,300 mm #Front wall / front corner posts - Through-loading via double-leaf front portal doors, each with 2 internal cam bar locks - Steel corner posts, release device for side tarpaulin - Bridge plate approx. 2,400 mm wide, divided once, approx. 350 mm long for resting on tail lift, capacity approx. 1,800 kg, incl. tail lift support - (Drawbar length then approx. 2300 mm; with 2000 mm tail lift, coupling set-back on truck min. 20 - max. 240 mm) #Side boards - 25 mm aluminium hollow profile, 400 mm high, drop-down and removable #Centre stanchions - 1 pair of sliding stanchions, movable along entire length #Insert slats - Wooden insert slats #Rear wall / rear corner posts - Steel corner posts up to lower edge of roof - Tarpaulin attachment with round tube and tensioning ratchet - Double-leaf rear portal doors, each with 2 internal cam bar locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning buckles - Customer lettering Dachser on side tarpaulins and rear portal #Roof - Fixed roof with tarpaulin and roof bows, tarpaulin colour: white - Optimised rain gutter at rear on end bow, above doors #Country of registration / plates - Germany, Dekra inspection and expert report (§13 EG-FGV) - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL

Condition: good (used), Year of construction: 1995, sheet thickness (max.): 6,040 mm, Sheet width 6040 mm Nsdpfs Afwuvsx Ag Iolh Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: excellent (used), Vacuum filler Vemag -Model: VDD 807 Dough divider -Power: 20 kW -Equipped with: Dough cutting attachment and conveyor belt -Cut-off mechanism: Rotary, AC servo-driven -Capacity: Up to 320 portions/min -Portion weight: 100–1,400 g -Year of manufacture: 2013 -Operating hours: 19 432 -Dimensions: 2450 × 1600 × 1950 mm -Vacuum pump dimensions: 720 × 600 × 800 mm -Additional spare parts included Nlsdpfx Agj Afwulj Ioh -Condition: Used in very good condition, after technical inspection, ready to work

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Control system: SIEMENS S7 Transfer distance: 0-800 mm Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Nsdpfx Age Afwubo Islh Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t Nedpfs Afwt Sjx Ag Ielh

Condition: like new (used), Year of construction: 2010, functionality: fully functional, overall weight: 4,795 kg, SCM WINDOR 20 corner processing center for machining wooden frames (windows and patio doors). It performs mortising, profiling, and hardware/glazing bead machining in a single pass, with automatic workpiece return, allowing a single operator to handle the entire process. Nsdpfxe Afwtvj Ag Islh Complete with a toolset for 68mm windows.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 11/2012, loading space length: 13,610 mm, loading space width: 2,490 mm, loading space height: 2,740 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 275/70, tire condition: 60 %, wheelbase: 8,860 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Steering Axle = More information = General information Year of construction: 2012 Registration number: OL-87-VB Axle configuration Make axles: BPW Tyre profile: 60% Suspension: air suspension Nlsdpfx Age Afwtqs Ish Rear axle 1: Tyre size: 275/70; Max. axle load: 10000 kg Rear axle 2: Tyre size: 385/55; Max. axle load: 10000 kg; Steering Weights Empty weight: 8.700 kg Carrying capacity: 25.300 kg GVW: 34.000 kg

Condition: used, Mobile micro cutter Inotec -Type: I175CD-90RW -Power: 115 kW -Year of manufacture: 2017 -Knives and sieves included -Cutting set diameter: 175 mm -Power supply: 400 V 3Ph 50 Hz -Dimensions: 1750 x 1150 x 1580 mm Nlodpfx Ago Afwtlo Ijh -With control cabinet -Cabinet dimensions: 2070 x 750 x 2000 mm -Condition: used in very good condition

Condition: used, Year of construction: 2015, Forel High Speed Hot -Melt IGU Line, comprising: Forel VW 2000 6 brush glass washer. Serial no: P15080 (2015) 2000 x 3500 (max) Forel / Soft Solution scanner. Serial no: LSC20150291 (from cabinet) Forel SQD 202. Serial no: P15081 (2015) 2 - Forel TSS 20D automatic spacer applicators. Serial no: P15082 (2015) Serial no: P15083 (2015) with guarding Forel Georgian assembly rack with Sick guard 2 - Forel CT 2000 corner tape applicators. Serial no: P15084 (2015). Serial no: P15085 (2015) Forel AFG 20D gas press / coupling press. Serial no: P15086 (2015) Forel SAHM 20D automatic heat sealing hot melt robot. Serial no: P15087 (2015) Nlodo Afwtgepfx Ag Ioh Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: new, Approx. 34.56 linear meters of META tire racks, tire racks, wheel racks, workshop racks, storage racks, available immediately from stock Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 34.56 linear meters Nlodpfx Ags Afwtbj Ish Shelf offer 34.56 linear meters (30 bays) consisting of: - 031 x uprights approx. 200 x 40 cm, disassembled (including 2 x feet and 2 x cover caps). - 180 x crossbeams approx. 115 cm. - 360 x self-tapping screws 4.8 x 13. - Manufacturer: META. - Load capacity: 150 kg per bay, evenly distributed. - Levels: 3 x storage levels. - Finish: Sendzimir galvanized. - New, ex-stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of €2 net per piece. -- MULTIPLE ITEMS AVAILABLE IMMEDIATELY-- Price: €2057.00 net plus applicable VAT. You will receive a VAT invoice. Transport: Delivery is available upon request via our partner shipping company; costs depend on your zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to help you realize your projects, from planning and ordering to installation.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 102.5 kW (139.36 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,110 kg, input voltage: 400 V, total width: 1,350 mm, total length: 2,650 mm, total height: 2,450 mm, warranty duration: 6 months, Aircooled chiller RHOSS WINPACK SE TCAESY 2110 102.5 KW Cooling capacity: 102.5 kW / 29.15 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer GSD80295VAB4-1 (scroll) + 1 pcs. Bitzer GSD80182VAB4-1 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump LOWARA, expansion vessel, buffer tank. Dimensions: 2.65x1.35x2.45 m. Weight: 1110 kg. Working hours: 10659/10659 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Nsdpfxe Afwr Ss Ag Ijlh After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, Screen Conveyor BELT CONVEYOR – 600mm/800mm/1000mm/1200mm/ WIDTH with ANY LENGTH 600 mm - 800 MM - 1000MM -1200MM CONVEYORS FROM FABO COMPANY • High quality Polat brand reductor • Drive drums are rubber coated and threaded. Nsdpfx Agj Afwr Hj Ielh • Belts are EP 125, 4 layers’ double stick 10mm thickness • Conveyor belt system was protected with emergency stop • All motors are GAMAK or equivalent brand • A side scraper system is available to prevent spillage of the final product into the stock area during crushing • The gear units are 3 transmission type and the new generation is with torque connection system • Long life rollers FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Nodpfs Afwrzsx Ag Iolh Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm