Arbo barve d.o.o.

Condition: used, Used Oliver & Batlle model HM-15 stainless steel bead mill. Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Approximate total capacity 15 litre (product dependent). This equipment has a stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Click on the link below to see a video of the machine running. Kjdox Hv Udopfx Affjfa

Condition: used, Used carbon steel grinding mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge. Kfodox Hv Svspfx Affea

Condition: used, Used Hosokawa Micron Ltd model MICRON RI 12 K322 CF inline disintegrating slurry mill. Product contact parts in stainless steel. Unit has a throughput capacity of approximately 100 to 120 cumt/hr (product dependent). Working pressure rated 10 bar with a design temperature of 0 to 100 deg.c. Unit is belt driven by 37kw motor. Unit is mounted on a mild steel stand. Kfedpjx Hv I Rsfx Affoa Click on the link below to see a video of the machine running.

Condition: used, HOSOKAWA ALPINE Blade mill Type ROTOPLEX A 80/160 RO 8 decks rotor with 5 blades 6 deck stator with 5 blades Kfsdsx Db R Aopfx Affsa Motor : 160 kw – Rpm 1485 – 3x 380 volts

Condition: used, Used FORPLEX stainless steel mill Type FL1 Motor : 5.5 kw – Hp 7.5 – Rpm 3000 – 3x 220/380 volts Rotary valve at the mill outlet Kedpfx Afexyykasfofa

Condition: used, Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotation. Mill is equipped with electric cabinet, belt cover and set of screens (6 pcs). Kfjdpfxjxyxndo Affoa Specifications: Horsepower: 75 kW Material Of Construction: Stainless steel Number Of Hammers/Row: 96 hammers / 24 rows Type: "U" type hammers

Condition: refurbished (used), FREWITT MF 8 Granulator / Oscillating Mill This granulator with adjustable sieve/support tray device (thereby preventing excessive sieve and rotor wear) can be used universally for dry granulation, sieving, crushing, wet granulation, etc. with a capacity of 2,000 kg/hour depending on the product properties. Infinitely adjustable gear motor (43-248 oscillations/min) Opening of the granulating chamber: 380 x 490 mm Active sieve area: 775 cm² Outlet height above floor: approx. 100 cm Kjdpfx Afoxvzf Dsfsfa Drive motor: 2.2 kW Manufacturer: Frewitt Year of construction: 2002 Floor Space: 110 x 120 x 190 cm

Condition: excellent (used), Skid with pin mill made of stainless steel, with a plate diameter of 160 mm, a bag filter, and a hopper. Kfsdpoxpx Dwsfx Affja

Condition: excellent (used), Knife mill manufactured by COMITROL, model 1700. Motor power: 22 kW. Motor pulley diameter: 100 mm. Mill pulley diameter: 70 mm. Mill rotation speed: 4200 rpm. Kodpfjxpx Dkox Affefa

Condition: excellent (used), Year of construction: 2004, overall weight: 500 kg, ATEX air micronizer mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High-efficiency equipment, highly suitable for the micronization of all types of powder products. Includes bag filter reference C9905. Kedpexpx Agjfx Affefa

Condition: used, Year of construction: 1996, functionality: fully functional, total length: 2,050 mm, total width: 1,020 mm, total height: 2,820 mm, overall weight: 3,050 kg, rotational speed (max.): 1,480 rpm, Offered are two ball mills, model Cobra 751, from manufacturer Bühler. Both machines come together with a pre-mill (model SRK-690) from the same manufacturer. All machines are in used condition but are fully operational. All machines comply with up-to-date safety standards. An inspection of the machines is possible upon request and by appointment. We are available for any further questions. Kjdpfsxldumjx Affjfa The stated price is for one pre-mill and one ball mill together, not for all 4 machines!

Condition: used, Year of construction: 1997, Used Netzsch model LME 20 stainless steel horizontal bead mill. Stainless steel jacketed milling chamer has capacity approx. 21,2 litre. Shaft is equipped with (12) griding discs and belt driven by el. motor 18.5 kW, adjustable speed 700 - 1400 rpm. Screen type of milling beads separation. Includes integrated contol panel and switchboard. Kjdexlb Hmopfx Affjfa

Condition: used, Year of construction: 1986, functionality: fully functional, Dry-ball mill – including new electric motor Kodpfx Ajxixiyjffjfa

Year of construction: 1998, condition: used, functionality: fully functional, machine/vehicle number: 10302038, Offered is a 3-roll mill from Bühler AG, year of manufacture 1998, and a press from geiger Maschinenbau AG, year of manufacture 2004. Both machines are in used condition and are currently not in operation. In terms of safety, the machines are up to the latest standards. Both machines are ready for operation. - 1300 mm roll width - max. 75 kW drive motor An inspection of the machines is possible upon request and by appointment. For further questions, we are at your disposal. Ksdpsxb Rc Asfx Affjfa

Year of construction: 2023, condition: new, functionality: fully functional, 2x ICM19 Standard system designed for operation at ambient temperatures of 5 °C - 30 °C GA-drawing according to NEA standard arrangement P&ID No. EX-Protection PSR 11 + ATEX protective systems Power Supply 380 V ± 5% - 50 Hz Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C. (altitude of installation side < 500m a.s.l.) Capacity Range 137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge Nominal Capacity 319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation) Details for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³ Kedpfx Aew Snm Uoffefa

Year of construction: 2017, condition: like new (used), functionality: fully functional, HBC-550 Industrial type cryogenic pulverizer machine was in limited use but never in a full-scale polymer production, good condition. Ksdpfxowuci Re Affefa Application: The low temperature grinding machine system used for various materials which can't be shattered in room temperature, and is widely used in all kinds of chemical, petrochemical, machinery, ship, automobile industry, electronic industry, clothing, coatings, printing, engineering plastic, rubber, shoes, thermoplastic materials, hot melt adhesive, nylon, polyester, polypropylene and polyethylene, thermoplastic elastomer TPU, TPEE, nylon PA11, of PA1010, PA12, PA6, PA66, PA610 copolymerization of nylon, polyester, Polyethylene, EVA, food industry as well as medicine.

Condition: used, Used Hosokawa Alpine ZPS 315 for sale. Was used for powder coatings. Kfjdpswdvt Uefx Affea Includes filter, cyclone, rotary valves, control cabinet, air intake cooler, and much more.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, Oscillating stainless steel granulator with enclosed product feed and manual dosing unit. The mill is mounted on a stainless steel frame with feet. Various sizes of sieve inserts are included with the system. The installation is fully documented with all details, including parts lists, operating manual, drawings, etc. Electrical connection: 380 V, 50 Hz, 2.5 Amp. The MG-800 has been qualified in accordance with GMP guidelines and is fully documented. Packaging, loading, and load securing on a truck are included in the sale price. Kjdpovt Sywefx Affofa

Condition: used, Year of construction: 1996, machine/vehicle number: 960816, Used WAB Dyno-Mill model KD 6 (6) stainless steel horizontal bead mill. Stainless steel jacketed milling chamer has capacity approx. 6 litre and it rated max product pressure 2 bar at max temperature 80°C. Jacket rated max pressure 8 bar, min cooling water temperature -20°C. Shaft is equipped with (6) polyurethane griding discs and belt driven by EExe eII T3 el. motor 10 kW, 1465 rpm, 50 Hz. Agitator disc circumferential speed 10 m/s. Shaft sealed with double mechanical seal. Gap type of milling beads separation mechanism. Includes integrated contol panel and switchboard, carbon steel frame. Kedpoun S S Ejfx Affofa

Condition: like new (used), Year of construction: 2015, Double-jacketed mobile tank with top agitation. 2 interchangeable agitators Kfedpfst Iwf Djx Affea Supplied with lifting jib to change agitator. Model: LMX 500 Year:2015 Max. capacity: 500 Kg Agitation control by SIEMENS Panel

Year of construction: 2008, condition: good (used), Double-shell tank, temperature maintenance with electric resistance Capacity: 1000 liters (max. weight 1100kg) Max. permissible pressure: -1/ 1 bar Test pressure 1.5 bar Max. time allowed: 50 °C Minimum time: 20 °C Kjdpfx Afot Iup Hjfjfa

Condition: used, functionality: fully functional, Brogtec METEOR homogenizer High performance colloid mill ATEX Colloid mill in pharmaceutical design, mobile on a stainless steel trolley. Electric cabinet on the trolley with speed control via frequency converter, on/off switch. Version with mechanical seal and sealing pressure vessel for pressure maintenance and cooling of the sealing medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V Kodpfx Afsr Hquhsfsfa Brogtec METEOR High performance colloid mill - homogenizer ATEX Colloid mill in pharmaceutical design mobile on a stainless steel trolley. Electrical cabinet on the trolley with speed control via frequency converter, on-off switch. Design with mechanical seal and barrier pressure vessel for pressure maintenance and cooling of the barrier medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V

Year of construction: 2000, condition: excellent (used), Neuman und Esser ICM 48/60 Classifier Mill, only the grinder without accessories, good condition. Kfjdjh Ugwyopfx Affoa Additional we have a ICM 8 and a big ICM 1000 for sale

Year of construction: 2021, condition: new, Hosokawa Alpine Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 to ZPS 630. Other manufacture or types on request. Kodegn Edlspfx Affofa We are able to deliver spare parts like: Classifier wheels, Liner, complete Bearing Assembly ( new or overhaul ), hammer with carbide face, shroud ring

Year of construction: 2000, condition: good (used), Hosokawa Mikropul ACM 30 mill - disc motor 30 KW - classifier motor 7,5 KW weight: 800 kg dimension: 1,5 x 0,6 x 1,4m height The mill is ready for opertaion! Kfsdpfx Afebichuefja