HDW Nederland

Condition: excellent (used), functionality: fully functional, machine/vehicle number: YS2R4X20005547819, mileage: 823,250 km, power: 331 kW (450.03 HP), first registration: 09/2026, fuel type: diesel, empty load weight: 8,237 kg, maximum load weight: 9,763 kg, overall weight: 18,000 kg, tire size: 385/65R22,5, tire condition: 80 %, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 05/2027, fuel: diesel, fuel tank capacity: 600 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6c, suspension: air, number of beds: 2, total length: 5,960 mm, total width: 2,550 mm, total height: 3,716 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2019, Equipment: ABS, EBS, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), fridge, full service history, lane keeping assist, navigation system, non-smoking vehicle, parking air conditioner, parking heater, power assisted steering, retarder, seat heater, traction control,

Condition: excellent (used), mileage: 674,535 km, power: 272 kW (369.82 HP), first registration: 05/1994, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1994, Equipment: ABS, differential lock, = Additional options and accessories = Tjdpfx Acozx An Ssnob - 1 fuel tank - Armrest - Day Cabin - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 1988, Shredder Manufacturer: Vecoplan Type: VAZ 145/135 Year of manufacture: 1988 Technical data Drive motor: 22 kW Feed system: hydraulic slider Infeed width: approx. 1,305 mm Infeed length: approx. 1,450 mm Rotor diameter: approx. 370 mm Rotor width: approx. 1,300 mm Number of tools/knives: 22 pieces Rotor speed: approx. 83 rpm Todszx An Espfx Acnsb Throughput capacity: approx. 300,500 kg/h Rotor: single-shaft rotor Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Saw carriage feed rate: up to 150 m/min Clamps: 7 pieces MACHINE DETAILS Manufacturer: HOLZMA Model series: Optimat HPL 380 Type: Optimat HPL 380/43/22 Year of manufacture: 2010 Machine No.: Control system: HOLZMA powerControl Operating hours: approx. 38,544 h Documented operating hours: 05.10.2023 Condition: used, well-maintained overall condition EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamp feed Main saw unit Scoring unit Automatic cutting length and positioning control Tsdpfx Aszx Anxjcnjb Angle fence Air cushion support table in the operating area CADmatic control and optimization environment PICA 108 label printer Roller and transport system in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Condition: excellent (used), mileage: 1,169,600 km, power: 162 kW (220.26 HP), first registration: 07/2005, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, total length: 9,200 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 2005, Equipment: ABS, air conditioning, differential lock, electric window regulation, = Additional options and accessories = Tsdpfjzx Anrsx Acnob - 1 fuel tank - Airbag - Armrest - Day Cabin - Disc brakes - Front suspension: Leaf - Open roof - Rear suspension: Air - Sper = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: excellent (used), mileage: 392,790 km, power: 184 kW (250.17 HP), first registration: 01/1989, fuel type: diesel, tire condition: 50 %, axle configuration: 4x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 7,500 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 1989, Equipment: ABS, differential lock, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Front suspension: Leaf - Hub Reduction - Open roof - Rear suspension: Leaf - Sper - Thick Axles = More information = Tyre profile: 50% Brakes: drum brakes Tsdpfx Acozx Anleneb Suspension: leaf suspension Front axle: Differential lock; Steering; Reduction: hub reduction Rear axle: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Working area X-axis: approx. 4,760 mm Y-axis: approx. 1,600 mm Machining units Unit carrier: 2 independently movable Main spindles: 2 Power of main spindles: 15 kW each Tool holder: HSK F63 Drilling heads: 2 Tool changer: 2 x 12-position Tsdpfezx Anfex Acnob C-axes: available FLEX-5 preparation: available Vacuum technology Automatically positionable vacuum clamps: available Liquid ring vacuum pumps: available Control system Control system: PC85 / woodWOP MACHINE DETAILS Machine data Manufacturer: HOMAG Model: BOF 712/48/16/AP Machine type: CNC portal machining center with automatic material handling Year of manufacture: 2010 Machine no.: CNC operating time: 17,952.86 h Documented operating hours: 05.10.2023 Condition: used, well-maintained Original documentation: extensive Handling and return conveying system Manufacturer: HOMAG Machine no.: EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveying system Portal handling Vacuum crossbeam Conveying technology

Condition: excellent (used), mileage: 1,112,065 km, power: 338 kW (459.55 HP), first registration: 04/2014, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2014, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, power mirror, spoiler, = Additional options and accessories = - 2 fuel tanks - 2 sleeping places - Airbag - Armrest - Disc brakes - Front suspension: Leaf - High sleeping cabin - Open roof - Radio/Cassette player - Rear suspension: Air - Roof Spoiler - Sleeper cabin - Sper - Spoilers = More information = Tsdpszx Am Ujfx Acnjb Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: refurbished (used), Year of construction: 2023, machine/vehicle number: R-00679, load capacity: 25 kg, arm reach: 1,831 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC M-20iD/25 manufactured in 2023.01. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Tjdpfx Acezx Am Ionsb Model: M-20iD/25 Model Number: A05B-1228-B202 Year of Manufacture Robot: 2023.01 Warranty term (months): 12   Payload (kg): 25 Reach (mm): 1831 Repeatability (mm): ± 0.02 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 250   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2023.01 RCC Length (m): 7   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: new, Year of construction: 2026, Engine power: 14 HP Splitting force: 20 tons LONCIN engine Starting: Puller and key Operating pressure: 18 - 20 MPa Cylinder: Ø101.6 x 610 mm Maximum log diameter: 500 mm Maximum log length: 610 mm Cycle time: 6 - 8 s Return time: 3 s 6-arm splitting wedge 22" STHIL guide bar 74-link chain, 0.75 mm Tsdpfozx Amzox Acnsb Saw/splitter drive: hydraulic motor/gear pump Ejector length: 3.2 m Conveyor belt (outfeed belt): 6800 x 250 x 4 mm 13" tires Engine oil: 0.8 L (10W30/10W40) Hydraulic oil 30 - 35 L (HL46) Hydraulic pump efficiency 81% Shipping dimensions (W x L x H) 2150 x 1000 x 1200 mm Machine dimensions 6400 x 1200 x 2200 mm Gross weight 650 kg Features: Splitting force of 20 tons – effective splitting of larger and harder logs. Combustion engine – independence from the electrical grid, suitable for field use. Hydraulic feed and pressure – stable material guidance and safe operation. Hydraulic cutting and splitting – one machine for two key stages of wood processing. Sturdy construction – durable and stable frame for intensive use. Ergonomy and comfort of use – convenient settings and intuitive operation facilitate everyday use. Universal use – suitable for farms, forestry work and professional woodworking.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Work in X, Y, Z axes Working area 3100 x 1340, Z axis = 180 mm Horizontal drills on X axis – 6 pcs Horizontal drills on Y axis – 4 pcs Vertical drills on X axis – 8 pcs Vertical drills on Y axis – 6 pcs Two tool magazines: side – 11 positions and transfer – 14 positions Grooving saw on X axis Spindle 8 kW, air-cooled, 600–24,000 RPM, HSKF63 Tsdpfx Acszx Amusnob Becker Vacuum Pump 2.2 kW Option for dual-field operation X axis speed – 25 m/min (programmable) – 56 m/min (vector) Y axis speed – 50 m/min (programmable) – 56 m/min (vector) Z axis speed – 15 m/min

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Vacuum raster table Edge milling unit along X-axis Year of manufacture: 2011 Tjdpfx Acozx Amnensb

Condition: used, Year of construction: 2017, operating hours: 179 h, fuel type: electric, color: other, GVW: 5.024 kg Dimensions (LxBxH): 312 x 175 x 274 cm Tjdpfx Aezx Amhjcnsb Lifting capacity: 363 kg Working height: 1.430 cm Maximum reach: 1.230 cm CE mark: yes Technical condition: very good Condition CE type: CE Genie GS4069 DC Year of construction: 2017 Hours: 179 hours Working height: 14.3 m Platform height: 12.3 m Weight: 5024 kg Engine: Electric Lifting capacity: 363 kg Drive: 4x2 CE certified

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: general overhaul Control: Mitsubishi - 64 bit CNC Generator power: 70 Amperes - multipulse Tedpjzx Ambjfx Acneb Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up rotary electrode changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64 bit, manufactured in 2006, has undergone a comprehensive and professional general overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the aforementioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screws of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt scrapers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is ready for immediate use and is ideally suited for reliable production operation. 09/02.

Condition: like new (used), 3 working axes working area X-2100mm, Y-3100mm maximum power consumption 14kW Tjdpfjzx Al Rjx Acnsb maximum spindle speed 24,000 rpm spindle mount ISO 30 air pressure 8 bar vacuum raster table, Becker pump 5.5 kW year of manufacture 2014 total power 17 kW total weight 3100 kg

Condition: used, Year of construction: 2017, operating hours: 413 h, fuel type: electric, color: other, GVW: 5.024 kg Dimensions (LxBxH): 312 x 175 x 274 cm Lifting capacity: 363 kg Working height: 1.430 cm Maximum reach: 1.230 cm CE mark: yes Technical condition: very good Condition CE type: CE Genie GS4069 DC Year of construction: 2017 Hours: 413 hours Working height: 14.3 m Platform height: 12.3 m Weight: 5024 kg Engine: Electric Lifting capacity: 363 kg Drive: 4x2 CE certified Tsdpszx Al Dofx Acneb

Condition: like new (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,900 mm, Equipment: CE marking, SAC FS 430 PLANER | SCM jointer planer with electric table adjustment | 430 MM! 4 TERSA knives! Todszx Alkepfx Acneb Professional planer from the Italian brand SAC, model FS 430. The machine is designed for precise surfacing and edge planing of wooden components. Its robust, heavy-duty construction and wide 430 mm working table make it ideal for use in both woodworking shops and for the production of furniture, doors, windows, and solid wood elements. Electric table adjustment allows for quick and convenient machine setup changes without the need for manual table lifting. The controls are located on a separate, easy-to-read operator panel. TECHNICAL SPECIFICATIONS: - Manufacturer: SAC - Model: FS 430 - Type: Planer - Planing width: 430 mm - Shaft: 4-knife TERSA - Shaft diameter: approx. 120 mm - Table adjustment: electric - Adjustment control: from the control panel - Table length: 2900 mm - Fence: cast iron, adjustable angle - Shaft guard: YES - Noise reduction combs: YES - Power supply: 400 V Machine testing on-site is possible. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT We have the following machines available: band saws, circular saws, crosscut saws and miter saws, thickness planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planer, four-sided, three-sided, two-sided, thicknesser, jointer, sander, planer, jointer-planer, planer-thicknesser, jointer-thicknesser, thicknesser-jointer, cleaning machine, mortiser, drilling machine, parquet machine, trimming machine, lathe, milling machine, spindle molder, top spindle, bottom spindle, sanders, wide belt sander, throughfeed sander, roller sander, disc sander, angle sander, jointer, drill, drilling machines, horizontal, radial, milling machine, multi-spindle, edge banding machines, edge bander, veneer machine, press, presses, lathes, band saws, briquetting machines, briquetting machine, chippers, chipper, wood chipper, dowel machine, dowel machines, mortiser, mortising machine, dust extraction, dust collectors, exhaust fan, fans, sharpener, sharpeners, compressor, compressors, honing machines, multi-function

Year of construction: 2024, condition: new, The OASI.S (Open Automation Systems Integrator Server) robotic material handling system for the automatic loading and unloading of IV bags and trays. This system is designed to transport filled IV bags from the cleanroom, load and position IV bags into trays using a pick-and-place robot, stack trays on a pallet, and move pallets of empty trays to and from cells. The system consists of connecting conveyors, a clean station with a delta robot, a robotic loading station (delta robot and 4-axis robot), and an unloading station (2 x 4-axis robots). The line includes: - 3 x FANUC M-410iC/315 robots, serial numbers: R24500486, R24500487, R24500488, manufactured in 2024 Todpszx Aldofx Acnsb - FANUC M-3iA/6S delta robot, serial number R244001FB, manufactured in 2024 - FANUC M-2iA/3SL delta robot, serial number R2430075E, manufactured in 2024 The individual robot cells are equipped with dedicated grippers, four Buuusch MM 1104 B V03 TNXX pumps, conveyor feeders, additional electrical cabinets, and many other accessories.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 190 mm, travel distance Z-axis: 1,010 mm, controller manufacturer: FANUC, number of axes: 2, Horizontal turning machine manufactured in 2002. This Victor VTurn-26 features a maximum turning length of 1,000 mm and a turning diameter of 190 mm. It offers a Z-axis travel of 1,010 mm, providing versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the Victor VTurn-26 machine we have for sale. Contact us for further details. • TL = 1000 mm Technical Specification Counter Spindle No Tedjzx Ak Hspfx Acnjb Driven Tools No

Condition: used, mileage: 94,000 km, power: 103 kW (140.04 HP), first registration: 01/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 6,970 mm, total width: 2,020 mm, permissible axle load (axle 1): 1,860 kg, permissible axle load (axle 2): 2,250 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Max. front axle load: 1860 kg Max. rear axle load: 2250 kg Weights Empty weight: 2.837 kg Carrying capacity: 663 kg GVW: 3.500 kg Functional Cooling starts at: -20 °C Cooling engine: engine driven Financial information VAT/margin: VAT qualifying Identification Registration number: VVJ-56-S Other information Cool unit make: Carrier = Additional options and accessories = - Airbag - Beifahrerbank - Climate control Tjdpfozx Aktjx Acnjb - Front center armrest - Heated driver's seat - Immobiliser - Outside temperature display - Radio - Running board - Suspension seat - Tined glass = Remarks = Carrier Xarios 350 Cooling/ Freezing/ Heating 220 Volt plug Cool unit brand: Carrier

Condition: used, Year of construction: 2017, operating hours: 355 h, fuel type: electric, color: other, GVW: 5.024 kg Dimensions (LxBxH): 312 x 175 x 274 cm Lifting capacity: 363 kg Working height: 1.430 cm Maximum reach: 1.230 cm CE mark: yes Technical condition: very good Condition CE type: CE Genie GS4069 DC Year of construction: 2017 Todpfx Aezx Akmscnsb Hours: 355 h Working height: 14.3 m Platform height: 12.3 m Weight: 5024 kg Engine: Electric Lifting capacity: 363 kg Drive: 4x2 CE certified

Condition: used, functionality: fully functional, overall weight: 5,000 kg, plate width: 1,200 mm, plate length: 1,200 mm, Equipment: type plate available, AMF Zero Point System – Clamping System with Zero Point Clamping Plates, Consoles, Hydraulic Unit, and Accessories Tjdpfezx Akajx Acneb Manufacturer: AMF System: Zero Point System Year of Manufacture (Components): Primarily 2013 / 2014 Offered is a comprehensive AMF Zero Point clamping system from industrial use. The system consists of several hydraulic zero point clamping plates, zero point clamping consoles, round changeover and clamping plates, intermediate flanges, adapter elements, an AMF high-pressure hydraulic unit, and extensive AMF clamping and system accessories. The components come from a cohesive clamping and machining system and are suitable for creating flexible workpiece, fixture, and pallet clamping systems on machine tools and machining centers. Individual sale of the components is possible. The existing system includes, among other things: - 1 × AMF Hydraulic Unit, Part No. 515841 - 1 × Large quantity of AMF K20 Zero Point Clamping Modules and System Accessories - 2 × Hydraulic AMF Zero Point Clamping Plates approx. 1,200 × 1,200 mm - 2 × Sets of AMF Zero Point Clamping Consoles, each with 4 stations and a total of 8 K20 clamping modules each - 1 × Clamping Plate Ø 650 mm / 8 Clamping Slots - 1 × Clamping Plate Ø 650 mm / 16 Clamping Slots - 1 × Clamping Plate Ø 1,000 mm / 8 Clamping Slots - 1 × Intermediate Flange / Changeover Table Ø 800 mm - 1 × Semi-circular Clamping Device - Several intermediate and adapter rings - 1 × Large Intermediate Flange / Clamping Device Ø approx. 1,250 mm - Various AMF Clamping Modules, Clamping Studs, Height Elements, Couplings, and Hydraulic Lines - Existing technical documentation Key Technical Data: Hydraulic Unit AMF - Part No.: 515841 - Manufacturer No.: 0113 0469 - Operating Pressure: 40–400 bar - Flow Rate: 2.5 l/min - Supply: 400 V / 50 Hz - Motor Power: 1.1 kW - Separate cable-connected control unit - Hydraulic connections with quick-release couplings AMF Zero Point Stations 1,200 × 1,200 mm - Hydraulic actuation - K20 Zero Point Clamping Modules - Operating Pressure: 50–60 bar - Dimensions: approx. 1,200 × 1,200 mm - Weight: approx. 423–424 kg per plate - Years of Manufacture: 2013 / 2014 AMF Zero Point Clamping Consoles - 4 stations per set - 2 K20 clamping modules per station - A total of 8 K20 clamping modules per set - Hydraulic actuation - Operating Pressure: 50–60 bar - Console Height: approx. 143 mm Changeover and Clamping Plates Various designs with: - Ø 650 mm - Ø 800 mm - Ø 1,000 mm - Ø approx. 1,250 mm - Radial T-slots - AMF Zero Point Clamping Modules - Underside clamping studs - Various adapter and mounting options Condition: Used, industrial condition. The components show the usual signs of wear, clamping, mounting, and storage. Some dirt, discoloration, and minor superficial corrosion marks are present. Some of the AMF system accessories are still in their original packaging or appear to be unused. A current functional, leak, or accuracy test of the hydraulic and pneumatic components has not been performed. Sale in the existing condition and scope of delivery as shown in the images. Inspection is possible by appointment. Individual sale is expressly possible.

Condition: like new (used), 11 upper hydraulic clamps 5 front pneumatic clamps Tedpfx Acozx Ai Aonsb Possibility to deactivate individual cylinders Maximum working height: 124 cm Clamp width: 16 cm Maximum working length: 13 m Machine length: 15 m Machine width: 110 cm Machine height: 270 cm Pump power: 3 kW Stepless adjustment of clamping force Weight: 5000 kg

Condition: excellent (used), Very well-maintained Sumbel Herold 500 edge banding machine in excellent condition. New infeed roller! Working width 50cm. Robust, solid two-roller edge banding machine for cold and hot glue. Consistent and adjustable glue application by varying the distance between the two rollers. Todpfozx Aipjx Acnjb 230V/50Hz, dimensions 85x60xH35cm, 60kg.

Condition: good (used), Year of construction: 2015, fuel type: electric, Weights Empty weight: 5.215 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.252 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1052 m Max swing of platform in degrees: 355 Production country: UK Tsdpozx Aiiofx Acnsb Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: Z34/22N Year of build: 2015 Condition: Used Data: Max. working height: 12,52 m Platform height: 10,52 m Max. reach: 6,78 m Platform lifting capacity: 227 kg Platform dimensions LxW: 1,42 x 0,76m Swivel range: 355° Gradeability: 35% Total dimensions LxWxH: 5,72 x 1,47 x 2,00 m Ground clearance: 0,14 m Drive type: Battery Empty weight: 5.215 kg Special features: Rotating work basket 180°, basket arm/vertical rotation angle 139°, white tires.