GSN Maschinen-Anlagen-Service GmbH

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2930815010072, travel distance X-axis: 450 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 665 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 12,000 rpm, operating hours of spindle: 349 h, coolant supply: 40 bar, number of slots in tool magazine: 117, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Automation PSS-T300 - 117 tools in the magazine Dwodpfx Aox Ex Rxob Tef - IKZ 40 bar _____ Basic machine G150 Travel path of the X-axis 450 mm Travel path of the Y'-axis 670 mm Travel path of the Z-axis 665 mm Power supply system 400 V, 50 Hz, TN-S Compressed air system, with pressure booster, operating pressure 5 and 9 bar, pressure vessel volume 10 l Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³, filter class ISO ePM1 80% Machine cooling system GCU (24 kW) with air-cooled cooling unit Modified door at machine column in case of integration of an automation system Machine control system HEIDENHAIN TNC7 with GROB⁴Pilot generation 2 Swivel axis calibration GSC Advanced Interface for connection of an automation system - standard interface version 1.7 (GROB) Control panel to enter tool data at tool loading and unloading position (HEIDENHAIN) Collision monitoring DCM Collision, version 1 (HEIDENHAIN) Rotary table with EROWA MTS pallet clamping system (B-axis) Motorized spindle HSK-A 63, 12,000 rpm, 64/83 Nm, 40/52 kW GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 117 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools, BLUM-NOVOTEST Pallet storage tower system PSS-T300, basic module Host computer software PROCAM EMS light 10x EROWA pallet, MTS 320 x 320 x 48 mm / STM 160, Tslots 3x Pallet ITS ø148 G (EROWA) 3x EROWA pallet ø 148 P for part clamp EROWA adapter pallet MTS - ITS (STM160) High-pressure cutting fluid system (10-40 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Changeable cutting fluid pressure increase for the motorspindle nozzles Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flushing unit for the base of the work area Flushing unit (Z-axis) Part clamping system in work area, customer-specific - Compressed air, manual pressure regulation, 0.5-5 bar (P8.1) - Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Machine status light, 3-colored Machine accuracy package 1 Radio touch probe RMP400 (RENISHAW) 12-month warranty

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2910555210188, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 30,000 rpm, coolant supply: 80 bar, number of slots in tool magazine: 326, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights G550 - powerful Motorized spindle HSK-A 63 30,000 rpm, 48/63 Nm, 40/53 kW, oil-air lubrication - TM200 HSK-A 63 with 200 tool pockets - IKZ 80bar _____ Basic machine G550 AB generation 2 Travel path of the X-axis 800 mm Travel path of the Y'-axis 1020 mm Travel path of the Z-axis 970 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³ Machine control HEIDENHAIN TNC 640 with machine control panel GROB4Pilot Swivel axis calibration GSC Classic Interface (software and hardware) for connection of an automation system - standard interface version 1.7 (GROB) Time-controlled start of warm-up program - programmable at the HMI Collision monitoring DCM Collision, version 1 (HEIDENHAIN) Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Pallet guide element at rotary table Motorized spindle HSK-A 63 30,000 rpm, 48/63 Nm, 40/53 kW, oil-air lubrication GROB spindle diagnostics GSD Double disk-type tool magazine HSK-A 63 for extra-long tools with 126 pockets in total Additional tool magazine TM200 HSK-A 63 with 200 tool pockets Tool cleaning device Tool coding, system BIS-M (BALLUFF) Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Scraper-type conveyor for larger quantities for aluminum chips, discharge height 1,600 mm High-pressure cutting fluid system (10-80 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Changeable cutting fluid pressure increase for the motorspindle nozzles Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Volume cutting package with detection element and flushing function Dwsdjx Evykepfx Ab Tof Flushing unit (Z-axis) Machine accuracy package 1 Radio touch probe RMP600 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: good (used), Year of construction: 2014, operating hours: 25,208 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, torque: 300 Nm, controller manufacturer: Siemens, controller model: 840D SL, rotational speed (max.): 12,500 rpm, spindle speed (max.): 12,500 rpm, spindle motor power: 40,000 W, number of spindles: 1, Operating hours: 23145 Year of construction: 2014 Control unit: Siemens 840 D SL Spindle: EEC 100 Einheit 12500 1/min, 40 kW, 300 Nm Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 50 bar, (work area flushing) Positioning range XYZ (mm): 800 / 800 / 800 Dodpfxjx Ecpis Ab Tewf Pallet size (mm): 500 X 630 Workpiece clamping: 60 bar Additonal options, Specifics: Control of 4th line in the work area for hydraulic switching function; Interface for exhaust system; Screen blow-off device for operator door; Fast drill fracture sensing (SBBK); Integrated process monitoring and collision monitoring; standard operator-panel for tool-magazin;

Condition: ready for operation (used), Year of construction: 2009, operating hours: 21,927 h, Control Unit Brand FANUC Model Series 21i-MB General Data Measurements width 2770 mm Measurements depth 4950 mm Measurements height 2804 mm Machine weight 15000 Main Drive Spindle speed range 8000-12000 Spindle motor power 22 kW Number of axis 4 Movement X-Axis Movement 850 mm Y-Axis Movement 700 mm Z-Axis Movement 750 mm Workpiece Workpiece weight 500 kg Table Outer length 500 mm Outer width 500 mm Dedpfox D Sl Dox Ab Tswf Tools Max weight 8 kg Max tool diameter 40 mm Max tool length 400 mm This HYUNDAI KIA HS500i Horizontal Machining center was manufactured in 2008. The 4 axis machine has a total of 21927 working hours. It operates through a FANUC Series 21i-MB control unit. The machine reaches a 12000 rpm spindle speed. It is in good technical condition, has full documentation and is ready for testing. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 5584 mm Machine weight 16000 kg Measurements height 3342 mm Measurements depth 3693 mm Dwodpex D Iuhefx Ab Tef Control Unit Brand FANUC Main Drive Number of axis 4 Tool taper BT 50 Spindle Speed 10000 RPM Movement X-Axis Movement 900 mm Z-Axis Movement 1020 mm Y-Axis Movement 800 mm Tools Number of index 40 or 60 Max tool diameter 115 mm Max tool length 600 mm Max weight 30 kg This 4-axis Makino a81 horizontal machining center was manufactured in 2011. It features a robust 630×630 mm pallet, capable of handling a maximum load of 1200 kg, and a spindle speed range of 20−10000 min−1. The machine offers a rapid traverse rate of 50000 mm/min, enhancing productivity. Ideal for complex machining tasks, consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 4 Dodpox D Hq Iefx Ab Tewf Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece X 900 mm Workpiece Y 1000 mm Workpiece weight 1000 kg Table Outer length 500 mm Outer width 500 mm Media Internal cooling Yes This 4-axis Mazak HI Nexus 6000 II horizontal machining center was manufactured in 2008. It features a robust NC rotary table, a Cromar chip conveyor, and cooling through the spindle. The machine offers a pallet size of 500 x 500 mm and can handle a maximum workpiece weight of 1000 kg. With 80 tool places and a rapid traverse rate of 60 m/min, this machine we have for sale is ideal for efficient machining. Contact us for further details regarding this horizontal machining center. Application Types Milling

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The machine is in good technical condition. X-axis travel: 900 mm Dodpfx Aex Dazysb Towf Y-axis travel: 500 mm Z-axis travel: 450 mm 4 axes Control: Fanuc FS31i Spindle speed: 20-20,000 rpm Table: - External length: 1,000 mm - External width: 500 mm - Maximum table load: 1,000 kg New electric spindle installed 4 years ago. Tool magazine for 30 tools, incl. tool holders. The machine operated in single-shift operation. Inspection under power possible by prior arrangement.

Condition: used, Technical details: Dsdsx A Sziopfx Ab Tjwf x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm speeds:: 6000 U/min table:: 500 x 630 mm with tool changer: 40 Plätze spindle taper:: SK 50 total power requirement: 25 kW weight of the machine ca.: 11500 kg

Condition: excellent (used), FANUC Professional 6 Control Working travels 900 x 900 x 1020 mm Tool changer with 136 Positions Spindle speeds -10'000 rpm Spindle taper HSK100 2 paletts 630 x 630 mm B-axis 0.001° Palett changer FASTEMS FPC1500 Cooling through spindle Djdpfx Aox A E Eneb Tewf 3D measuring taper Tool breakage control device Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,812 h, functionality: fully functional, machine/vehicle number: 108877, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 850 mm, table load: 800 kg, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 900 mm Y-axis: 780 mm Z-axis: 850 mm Distance from spindle center to pallet surface: 50 – 950 mm Distance from spindle nose to pallet center: 70 – 850 mm Pallet Dwodpfsxyiq Nex Ab Tof Pallet size: 500 × 500 mm Indexing angle: 1° Max. workpiece dimensions: 800 × 1,000 mm Max. workpiece weight: 800 kg Spindle Spindle speed: 50 – 20,000 rpm Spindle taper: HSK Rapid traverse & feed rate Rapid traverse (X/Y/Z): 60 m/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Tool system (ATC) Tool holder: HSK Max. tool diameter (adjacent tool): 100 mm Max. tool diameter (no adjacent tool): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Dimensions & Weight Machine height: 3,280 mm Footprint (W × D): 3,080 × 5,585 mm Weight: 21,000 kg Operating Hours Spindle hours: 13,812 h Operating hours: 15,544 h Power-on hours: 33,469 h EQUIPMENT 2-pallet rotary table (APC) Splash guard Coolant supply system Chip air blow (nozzle system) Internal chip conveyor (floor-based system) Spindle head cooling system Worklight (fluorescent) Signal tower (3-stage) Foundation pads Clamping bolts

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 900 mm Travel Y-axis: 800 mm Travel Z-axis: 970 mm Spindle speed: 12,000 rpm Distance between spindle center and table top: 100 – 900 mm Distance between spindle head and pallet center: 70 – 1,040 mm Spindle taper: HSK 100 Table size: 630 x 630 mm Table load capacity: 1,200 kg Max. workpiece diameter: 1,000 mm Max. workpiece height: 1,300 mm Tool changer: 90 positions Minimum increment: 0.001 mm Creep feed: 1 – 4,000 mm/min (23 steps) Cutting feed: 1 – 50,000 mm/min Rapid traverse: 50,000 mm/min Dsdpfxjxyiiro Ab Tjwf Pallet change time: 17 s MACHINE DETAILS Electrical data Operating voltage: 400 V, 3-phase, 50 Hz Total current: 98 A Incoming cable cross-section: 35 mm² Main fuse: 100 A Note: 2 trucks are required for transport.

Condition: used, Year of construction: 2008, operating hours: 61,112 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 250 with RSP Operating hours: 61112 Year of construction: 2008 Control unit: Siemens 840D PL Dwedpfexwpi Tsx Ab Tsf Spindle: 6.000 rpm Tool clamping system: HSK 100 Tool magazine / places: Rack / 234 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 800 / 800 / 800 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; alternative strategy; Integrated process monitoring (IPM) and collision monitoring; 3 colour status lamp; RSP 4-fach; tool cleaning; MCIS TDI tool planning; Feed force display; MCIS DNC; spline-interpolation; cycle 800;

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t Dwjdpfx Ajxvw Rpsb Tof spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Dedpfxjxvw Nlj Ab Tswf Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: MJ1-1139, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 0i-MF PLUS, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 900 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Max. spindle speed: 6,000 rpm MACHINE DETAILS Control: Fanuc 0i-MF PLUS Coolant supply: 46 bar Total weight: 17,000 kg Spindle operating hours: 1,600 h EQUIPMENT Dwedoxt E Ahjpfx Ab Tjf Chip conveyor Table shower system (Grundfos SPK4-8) TSC cooling system with Grundfos MTR3-36/CRK2-260, 46 bar/60 Hz Mahle filter Renishaw NC-4 laser tool measurement system RMP-60 spindle probe

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dwjdpfx Ajxtfz Dsb Tjf Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Dedpfx Absxni Uqe Towf Machine's weight: 18,5 t Tool holder: SK 50 x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Machine's weight: 18,5 t Tool holder: SK 50 x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Dwjdpsxni T Tjfx Ab Tof Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 61612677, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik, overall weight: 10,000 kg, No reserve price – sale guaranteed to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel range X-axis: 850 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Control unit: Siemens Sinumerik MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 2,500 mm Total weight: 10,000 kg Dsdjxm Ucdjpfx Ab Tswf EQUIPMENT NC rotary table Documentation Note: The clamping tower on the pallet table is not included in the scope of delivery.

Condition: good (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, nominal power (apparent): 61 kVA, controller manufacturer: Mazatrol, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 900 mm, workpiece weight (max.): 1,000 kg, total height: 3,200 mm, total length: 6,100 mm, total width: 3,500 mm, table width: 500 mm, table length: 500 mm, overall weight: 18,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 7,000 rpm, spindle motor power: 26,000 W, Equipment: chip conveyor, Dear Sir or Madam, we are offering you a used CNC horizontal machining center "MAZAK" in good condition. Dsdpfxoxf T Txo Ab Tewf Please refer to the attached file for details.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Djdoxf Htxopfx Ab Tewf Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 950 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 760 mm, table width: 630 mm, table length: 630 mm, TECHNICAL DETAILS Travel distances X-axis travel: 950 mm Y-axis travel: 720 mm Z-axis travel: 760 mm Spindle Spindle speed range: 12,000 rpm Work table Table outer length: 630 mm Table outer width: 630 mm Dodpfx Abew Nwups Towf MACHINE DETAILS Control: Fanuc Series 16I-M Dimensions Machine width: 3,200 mm Machine height: 3,200 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Standard Specifications of the Machine Table: Working area: 305 x 305 mm Max. workpiece volume: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Rotary axis: 0.001° – 360° Distance table top – spindle center: 40 - 550 mm Distance table center – spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Spindle speed: 20 – 20,000 rpm Drive: 4-step gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of 4th axis: 0.6 seconds Cutting feed X, Y, Z-axis: 40,000 mm/min Tools: Tool positions: 40 Tool selection: direct, bi-directional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Coolant system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 kVA, 200V AC, 3-phase Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control: Fanuc 16iMB Standard Accessories Spindle with 20,000 rpm and 4-step gearbox (2-speed gear drive, 2-speed electronic gear) 2-Point spindle bearing compensation within 0.005 mm (IAC System 1) Big-Plus spindle (contact in taper and face) Automatic spindle taper cleaning with compressed air Through-spindle coolant at 15 bar with separate pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of axis ballscrews in X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Dwodpfx Asw Al Tbjb Tjf Fixed tool position: each tool is independently coded by the machine and identified in the magazine Original Kitamura tool wait-release function via pre-selection of the T-code Automatic 180° pallet changer (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip belts for coarse and fine chips, with filter system Lower chip flushing with separate 1,200 W pump Fully enclosed guard Automatic central lubrication of guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light Cycle end lamp Tapping without compensating chuck 4 free M-functions, M20 – M23 Swiveling control panel Portable handwheel RS 232C interface PCMCIA interface Door interlock Emergency stop at tool magazine Manual index switches at tool magazine Self-diagnostic function

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: S2749544010016, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK ONE, rotational speed (max.): 16,000 rpm, number of slots in tool magazine: 167, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Rotary pallet storage system PSS-R1800 with 10 storage locations - 167 tools in system _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector: 1,000 m³, filter class ISO ePM1 80% Machine cooling system with air-cooled cooling unit dynamic package Electrical cabinet lighting Machine control system SINUMERIK ONE with machine control GROB⁴Pilot gen. 2 Swivel axis calibration GSC for 4-axis machining centers Program for creation of an automatic clamping sequence Time-controlled start of warm-up program - programmable at the HMI EES function to realize CN program on an external data carrier (SIEMENS) Technology package SINUMERIK MDynamics - milling (SIEMENS) Dwedpfxjwz Edds Ab Tof Control panel to enter tool data at tool loading and unloading position Pallet guide element at rotary table Extension of B-axis' radius of action Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 167 (47+10|50|60) tool pockets Tool cleaning device Tool coding, system BIS-M Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Setup station door for manual loading and unloading and automatic load and unload systems Rotary pallet storage system PSS-R1800 with 10 storage locations Air gun at setup station Cutting fluid return from pallet storage system PSS to machining center Lighting in the setup station of the PSS pallet storage system Clamping program editor for setup station of PSS-R450-1800 Support EES-call PSS-R450-1800 Support GSC swivel axis calibration PSS-R450-1800 NC program management system by the primary control PSS-R450-1800 Tool requirement planning PSS-R450-1800 5x Pallet 500 x 630 mm, T-slots Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Cooling fluid system Premium - system description Premium flushing package Part clamping system in work area, customer-specific Part clamping system in setup station of pallet storage system PSS, customer-specific Part clamping system in setup station of pallet changer, customer-specific Rotating inspection glass for work area door Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: new, Year of construction: 2025, AVEREX HS-540i GTS 2-APC, New Machine Horizontal Machining Center with the option to adapt an optional pallet rotary magazine (6-APC or 8-APC) Standard equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - 15" color LCD display, MANUAL GUIDE i, QWERTY* keyboard - iHMI – Intelligent Human-Machine Interface - Program memory with 2 MB and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with 200-block Look Ahead function - HRV3+ servo drives (digital servo current control) - JERK Control (jerk regulation) - Fine Surface Technology (High-Speed High Quality) - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card (PCMCIA Flash Card) and USB slot - Network interface RJ45, Embedded Ethernet - Enhanced embedded Ethernet - Week timer: Auto. Power On/Off for the machine - High-speed skip function Dwjdpfjwxdpgex Ab Tof - Tool Offset Memory C - 400 pairs of tool corrections - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100–#199, #500–#999) - Program restart - Helical interpolation - Cylindrical surface interpolation (G07) - Fixed drilling cycles - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring, scaling - Polar coordinate programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional skip blocks, up to 9 - User-defined macro programming Axis Travel - Travels X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0–40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole grid: 5 x 5 M16 x 25 mm deep, 100 mm pitch - Loading capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,100 mm - Standard preparation for retrofit of 4-way pallet storage (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (optional SK-40 DIN69871 or HSK-A63) - Number of magazine positions: 80 - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent spaces free: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: Fixed place / random - Speed: 16 s for 80 tools - Tool change time: 0.9 s / 2.1 s (heavy tool) - Chip-to-chip time: 3.0 s / 3.5 s (heavy tool) Spindle Rotary Axis - Manufacturer: PARKSON™ - Axis: full 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screws Coolant, chip, and compressed air management