Can Proje Mühendi̇sli̇k

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum filling Bottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage productio.. Iasdpfx Agjy Szcwe Ist

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 7,300 kg, empty load weight: 6,600 kg, operation weight: 8,200 kg, number of seats: 2, Year of construction: 2012, operating hours: 5,580 h, Equipment: adjustable chassis, all wheel drive, differential lock, hydraulics,

Condition: used, Year of construction: 2004, machine/vehicle number: SO136, Used combiblock KRONES contiform S8 + mrecafillTechnical Specifications & Performance DataThis Krones Contiform S8 combi blow molding unit is integrated with a Krones Mecafill filler and Krones capper, delivering reliable performance for modern beverage production. Built for PET bottle handling, it supports common still and sparkling water formats on a compact rotary platform. As part of a used bottling line or as a stand-alone combi station, it offers robust engineering and consistent output for industrial packaging operations.Manufacturer: KronesModel: Contiform S8 (combi with Mecafill filler and Krones capper)Year of manufacture: 2004Production speed: up to 12,800 bottles per hourContainer material: PETBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum container height: 350 mmNo. of cavities (molds): 8Operating pressure: 40 barWork direction: ClockwiseLayout dimensions (approx.): Length 13022 mm, Width 10649 mmAdditional mechanics: 8 infeed/outfeed grippers; 220 mandrels on the preform handling pathAdvanced Automation & Control SystemsEngineered for dependable operation, this blow molding machine features an operator-friendly interface and modern control architecture to streamline setup, monitoring, and changeovers. Digital recipes help maintain repeatability across formats in second hand environments.HMI: KronesPLC: SiemensElectrical supply: 400 V, 3-phase, 50 HzAutomation: Rotary combi integration with synchronized blow, fill, and cap functions for stable throughputOperator protections: Safety guarding and interlocked access for maintenance zonesProduction Line Integration CapabilitiesThe Contiform S8 combi configuration enables seamless upstream preform handling and downstream filling and capping, minimizing footprint and transfer points. It integrates easily within a used bottling line, supporting conveyors, inspection, and downstream packaging machinery for beverage production.Operation modes: Integrated combi (blow–fill–cap) with rotary synchronizationFormat range: 0.5L to 1.5L PET bottlesApplication: Ideal for water bottling within industrial packaging and production line setupsMachine Condition & Maintenance HistoryThis machine has been overhauled and is guaranteed, prepared for immediate operation with compatible spare parts available. It combines the assurance of refurbished equipment with the value expected from second hand bottling equipment.Condition: Overhauled, guaranteed, ready for operationWarranty: 6 monthsOperational Performance & VersatilityDesigned for PET containers, this rotary blow molder provides stable performance for stil... Iasdpfx Agsy Szb Te Iet

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements includin... Ijdpfey Szb Hox Ag Isat

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 24000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer prepares ca... Ijdpfxey Szbys Ag Ioat

Condition: excellent (used), mileage: 165,419 km, power: 294 kW (399.73 HP), first registration: 05/2007, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, total length: 9,000 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2007, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Airbag - Armrest - Front suspension: Leaf - Hydraulics - Open roof - PTO - Rear suspension: Air - Sleeper cabin - Sper = Remarks = Superstructure Tank capacity: 18000 liters = More information = Iaedpfx Agey Szbmo Ijt Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Differential lock; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 56 kg, volume flow: 390 m³/h, operating pressure: 315 bar, power: 4 kW (5.44 HP), type of cooling: air, New Schmalz vacuum blower. Located in Vilnius, Lithuania. Ijdpfx Asy Sza Aeg Ioat I have more vacuum products available; feel free to contact me.

Condition: excellent (used), Year of construction: 2017, 378 USED Vemag bread divider, model Robot 500 - Filler. TECHNICAL DATA: - Weight range: 5 g - 30 kg Iedpfsy Szavex Ag Ioat - Capacity: 2500-2800 pcs/h depending on the weight. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2021, 2021 DELTA WASP 3MT Large Format Industrial 3D Printer Iasdpsy Sy U Sofx Ag Iet Print Volume Ø 1000 x h 1000 mm. Max Output 3.8 kg/h with ABS WASP and 5mm Nozzle. Standard Nozzle Ø 3 mm. Compatible Nozzle diameter 2 mm / 3 mm / 5 mm. Layer Resolution Min 0,5 mm (with a 2 mm nozzle) – Max 2,5 mm (with a 5 mm nozzle). Print Speed 100 mm/s. Travel Speed 200 mm/s. Connectivity WiFi, LAN, USB. Hotend Temperature Max 350°C. Chamber Temperature Max 150°C. S/No.212640124 (2021) Printer Dimensions 215 cm x 235 cm x 305 cm. Printer Weight 350 Kgs. Required Space for Assembly 5,5 m x 2.5 m x H 3.60 m. Packaging Dimensions 310 x 132 x 116 cm. Weight with Packaging 670 Kgs. Please Note: Feeder Is Currently Jammed So May Need Attention.

Condition: excellent (used), Year of construction: 2020, 2020 SERON 1310 PRO Milling Machine Isdpfx Agey Sy N Ns Ieat Working Area: 1300 × 1000 mm. Z-axis Working Range: 300 mm. Control Type: CNC. Drive: Double-sided. Electrospindle: HITECO. Maximum Power: 12 kW. Rotation Speed: up to 24,000 rpm. Toolholder Standard: HSK63. Bearings: Ceramic. Cooling System: Air (fan). Machine S/No: 26431/19082020. The 1310 PRO model allows for efficient machining of soft metals, plastics, composites (carbon, alucobond, dibond), wood, OSB and MDF boards, PVC, HPL, and glass.

Condition: ready for operation (used), Year of construction: 2021, total height: 1,065 mm, total width: 645 mm, overall weight: 114 kg, table width: 165 mm, table length: 165 mm, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details. Formlabs Fuse 1 • Build Volume 165 x 165 x 300 mm 6.5 x 6.5 x 11.8 in • Layer Thickness 110 microns 0.004 in • Build Speed 10 mm per hour 0.39 in per hour • Laser Type Ytterbium Fiber • Laser Spot Size 200 microns 0.0079 in • Material Refresh Rate 30 to 50 percent • Hopper Capacity 8.5 kg PA12 nylon 18.7 lb • Dimensions 685 x 645 x 1065 mm • Maximum Part Size 15.9 x 15.9 x 29.5 cm 6.3 x 6.3 x 11.6 in • Minimum Access Dimensions 125.5 x 149.5 x 187.0 cm 49.4 x 59.0 x 73.6 in • Printer Dimensions 64.5 x 68.5 x 107 cm 165.5 cm with stand • Weight 114 kg • Startup Time 60 minutes • Operating Environment 18 to 28 degrees Celsius 68 to 82 Fahrenheit less than or equal to 30 percent humidity • Internal Temperature 200 degrees Celsius 392 Fahrenheit Iajdpfx Aoy Sy Nvog Ijt • Temperature Control Quartz tube heating elements PTC cartridges • Air Handling pressure controlled two stage filtration HEPA and carbon • Power Requirements EU 230 VAC 7.5 A US 120 VAC 15 A • Galvanometers Formlabs custom • Laser Wavelength 1065 nm • Laser Power maximum 10 watts • Beam Divergence 4.01 mrad • Laser Class Class 1 • Connectivity WiFi 2.4 GHz Ethernet 1000 Mbit USB 2.0 • Touchscreen 10.1 inch 1280 x 800 • Control Brand Formlabs • The display is damaged however this does not affect the function Fuse Sift OPTIONAL: Swift Station price on request • Fuse Sift Dimensions 99.1 × 61.0 × 188.8 cm 39.0 × 24.0 × 61.8 • Fuse Sift Weight 93 kg without build chamber or powder 205 lb • Build Chamber Dimensions 27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in • Build Chamber Weight 11 kg 17.6 kg full with 20 percent packed powder 24.3 lb 38.8 lb • Build Volume 16.5 × 16.5 × 30.0 cm 6.5 × 6.5 × 11.8 in • Fresh Powder Hopper Capacity 8.5 kg Nylon 12 18.7 lb • Used Powder Hopper Capacity 9.1 kg Nylon 12 20 lb • Air Filtration Technology replaceable HEPA filter • Operating Environment 18 to 26 degrees Celsius 68 to 80 Fahrenheit less than or equal to 30 percent humidity • Air Handling negatively pressurized hood with replaceable HEPA filter independent venting system • Power Requirements EU 230 VAC 7.5 A dedicated circuit US 120 VAC 15 A dedicated circuit • Power Requirements high power vacuum EU 230 VAC 10 A US 120 VAC 20 A • Vacuum Requirements auxiliary vacuum with static dissipative grounded components • Sound Emission maximum 76.5 dB

Condition: good (used), LDS / CTS Vibration Test System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration test system consisting of an LDS shaker, SPA30KCE power amplifier, IMV K2+ control system, and CTS climate chamber. Ideal for combined vibration and climate testing in industry, automotive, aerospace, as well as research and development. The blue hall crane / portal crane visible in the pictures is not included in the scope of delivery. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Type: V850-440 LPT 750C Serial number: SP4537-001/1 Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 3000 Hz Sine force: approx. 22.2 kN Shock force: approx. 66.7 kN Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal payload: approx. 350 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Type: SPA30KCE Serial number: SP4537-005/1 Class-D high-performance switching amplifier Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. power consumption: 38.14 kVA Max. output power: 21.0 kW Efficiency: > 90 % Control System IMV K2+ Vibration Control System Multi-channel control system including Dell Precision PC system, monitor, keyboard and mouse. Enabled functions: Sine, Resonance Dwell, Limit Control, Multi Sweep Sine, Sine-on-Random, PSD Limit Control, Shock, Scheduler, Multi-Language, and System Monitor. CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Type: CV-70/1100-5 System number: 193073 Year of construction: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Rated current: 28.7 A Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Sliding table / mounting table included Vibration-isolated installation Programmable operation possible Completely cabled test system Sliding table: 760 mm x 850 mm Threaded insert spacing: 100 mm Weight Iedpfx Agjy Sy Npo Isat Shaker: approx. 1,300 kg Amplifier: approx. 500 – 600 kg Total weight complete: approx. 6,000 – 7,000 kg Transport only by a suitable heavy-duty transport company. Dimensions, weights, and technical data are partially estimated or not fully known. Information may vary. Condition Used system from industrial use. Optical condition see pictures. Inspection possible and desired by appointment. Scope of delivery LDS V850-440 LPT 750C shaker LDS SPA30KCE amplifier IMV K2+ system Dell Precision PC system CTS climate chamber CV-70/1100-5 Sliding table / mounting table Accessories as shown in the pictures Loading possible by appointment at extra cost. Commercial sale without warranty. Subject to change, errors and prior sale.

Condition: new, IVECO 180E32K, New, Euro 6, ADR compliant, wheelbase 3690 mm, ZF 9-speed manual transmission, maximum trailer weight, reinforced front axle with a capacity of 7.5 tons, differential lock, reinforced front and rear leaf springs, steel bumper, rear-view camera, sun visor, top air driver's seat, electric windows and mirrors, fog lights. Iodpsy Sy E Rofx Ag Ijat

Condition: excellent (used), Year of construction: 2020, 2020 BAYKAL BPS- 3006 Plasma Cutting Machine with Hypertherm source Iedpsy Sy Ewofx Ag Isat Working Range (X/Y Axis): 3000 mm × 6000 mm. Drive: Double-sided. Cutting Table: 3200 × 6400 mm, with extraction sections. Cutting Head: Plasma Cutting. Plasma Source: Hypertherm 170XD. Gas Console: Automatic Gas Mixing Console. Control System: Tecnos CN 12. Additional Equipment: Pipe Cutting Rotator. Machine S/No: 26811

Condition: used, mileage: 415,919 km, power: 331 kW (450.03 HP), first registration: 05/2013, fuel type: diesel, number of seats: 46, gearing type: automatic, emission class: euro5, color: other, brakes: retarder, Year of construction: 2013, Equipment: ABS, air conditioning, cruise control, navigation system, = Additional Options and Accessories = - DVD - Air conditioning - Front refrigerator - Sleeper cab - Toilet - USB connections Iodpfsy Syz Esx Ag Ieat - Webasto heater = Additional Information = Height: 100 cm Damage: none = Company Information = We are an international company based in Belgium, located near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering an extensive lot that serves as a display area. We always keep a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can help you find the right coach, school, or city bus tailored to your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing of used buses is possible during business hours: Mon-Fri: 08:30 AM - 12:00 PM, 12:30 PM - 5:00 PM. Mowimy po Polsku (Agata). We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: good (used), functionality: fully functional, power: 55 kW (74.78 HP), gearing type: hydrostat, fuel type: diesel, color: blue, overall weight: 5,900 kg, maximum load weight: 2,900 kg, lifting power: 2,900 kg/m, lifting height: 3,500 mm, tire size: 405/70-24, tire condition: 85 %, axle configuration: 4x4, number of seats: 1, shovel volume: 1.15 m³, Year of construction: 2017, operating hours: 2,557 h, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, standard shovel, === KEY SPECIFICATIONS === Year: 2017 Operating hours: 2,557 h Operating weight: 5,900 kg Max. tipping load: 4,140 kg Payload: 2,900 kg Bucket capacity: 1.15 m³ Drive: Hydrostatic Four-wheel drive: Yes Differential lock: 100% connectable Quick coupler system: Yes, hydraulic Cabin: Closed cabin Heated cabin: Yes Tyres: Pneumatic rough-terrain tyres Tyre size: 405/70-24 Engine manufacturer: Deutz Engine power: 55 kW Travel speed: 20 km/h Hydraulic flow: 84 l/min Hydraulic pressure: 250 bar CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and documentation included Ready for immediate transport and use Hydraulic quick coupler system Parallel-controlled loading system Compact and manoeuvrable wheel loader One-piece frame with all-wheel steering Spacious cabin with excellent all-round visibility Standard bucket included === CONDITION === Good working condition – checked, maintained and tested by certified professionals. The machine is used and shows normal signs of wear. Bucket and tyres show visible signs of use, consistent with the age and application of the machine. Inspection possible on request. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price: €37,500 (EXW / excl. VAT). The Kramer 1150 is a compact and manoeuvrable wheel loader designed for a wide range of applications in construction, agriculture, landscaping and general material handling. Thanks to its optimised power-to-weight ratio, low operating weight and high payload capacity, this machine offers excellent efficiency in daily operation. The Kramer all-wheel steering system provides strong manoeuvrability and stability, even in confined working areas. This machine is equipped with a closed cabin, hydraulic quick coupler system and standard bucket, making it ready for immediate use. All machines are fully inspected, CE-certified and ready for operation. Spare parts and professional assistance available on request. === DELIVERY === Isdpey Syzxsfx Ag Ieat Crane loading possible on request for smooth transport and shipment. Flexible shipping options tailored to your destination and logistics preferences. All transports are professionally handled by the logistics team of Collé Rental & Sales.

Year of construction: 2020, condition: excellent (used), 2020 MAVIJET MJT-W53D- 4020 Water Jet Isdpjy Syzlefx Ag Isat Maximum pump pressure: 4000 bar. Pump capacity: up to 8 l/min. Working area (X/Y axis): 2100 mm × 4100 mm. Working range of the Z axis: 250 mm. Positioning accuracy: ±0.01 mm. Travel speed: 30,000 mm/min. Equipment: high-pressure pump, abrasive tank. Machine S/No: CNC2007056

Condition: used, mileage: 280,447 km, first registration: 06/2021, IVECO 80E22P, Year 2021, Euro 6 emission standard, White color, 280,447 km, Wheelbase 3105, 6-speed manual transmission, air conditioning, air suspension on the rear axle, 6-cylinder engine, fully equipped. Iodpoy Syy Iofx Ag Ijat

Condition: used, 8 m Office Container / Shipping Container – with WC, Storage & Full Equipment ----- PRICE: €7,000 negotiable ----- SHORT & SWEET: ✅ Office, WC & storage in one container ✅ Fully equipped: heating, sink, high-voltage connection, awning ----- DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m in length) in very good condition – ideal as office containers, site containers, or storage containers. The containers are sourced from the French CARGLASS fleet and feature high-quality fittings. All technical components are fully functional and ready for immediate use. Condition is guaranteed and documented on the invoice. Equipment at a glance: ✅ Separate WC with washbasin ✅ Office area with plenty of natural light ✅ Kitchenette with sink & hot water boiler ✅ Storage room ✅ Heating & air conditioning unit ✅ Electric 3x7 m awning with remote control ✅ High-voltage power connection, electrical installation & outdoor lighting ✅ Ramp & fire extinguisher ✅ Awning Special features: ✅ Practical room layout: office – WC – storage ✅ Original pictures – condition as shown ✅ Ideal as site office, container office or mobile service point ✅ Technically sound, ready for immediate use ----- DELIVERY & AVAILABILITY: ✅ Price: €7,000 negotiable ✅ Delivery within max. 2 weeks ✅ Delivery costs (excluding offloading): on request € ✅ Immediately available: 1 unit from Dunkerque (France) Iodpfx Agsy Sy Nce Ioat ----- Contact us now to inquire & reserve! Additional photos, technical drawings and details available on request. NAUTEXA GmbH

Condition: used, Year of construction: 2005, operating hours: 43,868 h, functionality: fully functional, machine/vehicle number: 054111169, FOR SALE: USED HEIDELBERG CTP, FULLY FUNCTIONAL WORKING HOURS: 43,868 CURRENT WORKING HOURS: 14,781 Iedpfx Agey Sywao Ioat EXPOSURE HOURS: 9,728 PLATES PRODUCED: 164,041

Condition: used, Year of construction: 1997, Fully automatic index cutting machine Equipped with: Feeding Opening Counting/cutting 1 Counting/cutting 2 Printing station 1. colour Printing station 2. colour Delivery Technical data: Max. size: 185 x 130 mm Min. size: 50 x 60 mm Book thickness max. 15 mm (depending on product) Binding category: all standard binding sorts Cover bendable (no hardcover) Cut form angular cut Types Printing European/Arabic index combined indexes double and multiple indexes Iodpjy Syuljfx Ag Ijat Printing: one or two colours letters and words Dürrer promotional/explanatory video:

Condition: used, Year of construction: 2000, Fully automatic machine to affix promotional inserts Equipped with: Iaodpjy Syr Dofx Ag Iet Books pile feeder Feeding Measuring book height Opening cover Counting/opening Tearing Feeding promotional material Separating promotional material Adjusting promotional material Cutting promotional material Gluing promotional material Sticking in Pressing Delivery Technical data: Max. size: 316 x 216 mm Min. size: 90 x 60 mm Max output: 1200 pieces/hour Thickness 3 – 25 mm Promotional inserts: single/folded sheets, thinly bound products (max. 1,5 mm thick) Dürrer promotional/explanatory video:

Condition: reconditioned (used), Year of construction: 2011, operating hours: 2,006 h, functionality: fully functional, working width: 430 mm, area performance: 1,700 m²/h, overall weight: 179 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO HAKOMATIC B30 TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2011 with 2006 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's contour. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1700 Tank capacity (l): 30/30 Machine weight, ready to use (kg): ~179 Power output (kW): 1.13 Iodpfey Syrkex Ag Ieat INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: used, Offered here are used 40HC storage containers available from Kornwestheim, Duisburg, Hamburg, Frankfurt, and other locations depending on availability. Prices vary based on the location. Isdpfx Aey Sy I Seg Ijat CONTAINER TYPE: 40HC Storage Container CONDITION: Used, wind and watertight, cargo worthy, wooden floor, sample pictures DIMENSIONS LxWxH: According to ISO standards. External dimensions: 12,192 x 2,438 x 2,896 mm. Internal dimensions: 12,032 x 2,352 x 2,698 mm. Door opening: 2,343 x 2,585 mm. Volume: 76.2 m³. Weight: 4,000 kg. TRANSPORT: Please provide us with your postal code so we can issue you a free and non-binding offer for the container including delivery and, if required, unloading from the truck. VARIETY: We also supply sea containers in all common sizes (20DV, 40DV, 20HC, 40HC...) for any purpose, whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Year of construction: 1998, condition: good (used), Lifting capacity: 500 kg Width: 1950 mm Height: 1300 mm Depth: 350 mm Ijdpfxoy Sypie Ag Ioat Net weight: 79 kg