Trypet

Condition: used, mileage: 110,899 km, power: 78 kW (106.05 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: Hfjdpfsy Su Rbjx Ag Ijg - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 100,354 km, power: 78 kW (106.05 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 08/2026, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Hfedpsy Su N Rjfx Ag Iog Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 99,882 km, power: 78 kW (106.05 HP), first registration: 10/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 02/2027, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Hfjdpfxsy Su N Dj Ag Ijg Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 145,000 km, power: 78 kW (106.05 HP), first registration: 09/2013, fuel type: diesel, empty load weight: 2,500 kg, maximum load weight: 1,000 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,840 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2013, construction height: 2,850 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 vehicles from Deutsche Post. Hsdpoy Su Nwsfx Ag Isfg Other services: - Various loading options - Registration service - Delivery available throughout Germany for an additional charge Inspections possible without appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-Mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sales to businesses only (agriculture, freelancers, small or large enterprises) or export. Subject to errors and prior sale. CoC available.

Condition: used, mileage: 98,000 km, power: 78 kW (106.05 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,849 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2013, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Vans Hfodpfxjy Su Nqj Ag Iog - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 vehicles from Deutsche Post. Other services: - Various loading options - Registration service - Delivery available throughout Germany for an additional charge Inspections possible without appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-Mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sales to businesses only (agriculture, freelancers, small or large enterprises) or export. Subject to errors and prior sale. CoC available.

Condition: used, mileage: 96,612 km, power: 78 kW (106.05 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 08/2026, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Hfodpfsy Su Nkex Ag Isg Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 136,994 km, power: 78 kW (106.05 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 09/2026, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Hfedpoy Su Ndsfx Ag Ieg Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 146,860 km, power: 78 kW (106.05 HP), first registration: 10/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 01/2027, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain Hsdpfx Agoy Su I Te Isfg More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 134,450 km, power: 78 kW (106.05 HP), first registration: 10/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Hfedpfx Agjy Su I Hs Iog Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, Year of construction: 1981, machine/vehicle number: 800 02 81 46, type of input current: three-phase, Specialized EDM drill (eroding machine / hole starter EDM machine) This machine is primarily used in metalworking as a hole starting EDM machine or for spark eroding the removal of broken tools (such as taps, drills, or reamers) from valuable workpieces. This is done with extreme precision without damaging the surrounding thread or material. Hfjdpfx Aey Su Iyeg Isg

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm Hjdpoy Su Itofx Ag Iefg - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-240-06-8516, functionality: fully functional, operating hours: 1,039 h, power: 25.4 kW (34.53 HP), input voltage: 400 V, input current: 46 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 5,600 mm, saw blade diameter: 450 mm, height adjustment type: pneumatic, saw blade bore: 60 mm, Equipment: documentation/manual, saw blade guard, scorer, Horizontal pressure beam saw Panel saw from the ProfiLine series Fully equipped, many (otherwise unavailable) extras retrofitted by HOLZMA. Very well-maintained and manufacturer-serviced machine, only 1,039 (!) operating hours SPECIFICATION / FEATURES: Cutting width / cutting length: 5,600 / 5,600 mm Saw blade projection: 125 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Power-Loc system for quick blade change 14 double-finger, floating mounted clamps Pneumatic trim stops for protruding surface layers Central angle pressure device, adjustable pressing pressure 5 air cushion tables, 3 extendable to approx. 3,500 mm Laser alignment system in the cutting direction Grooving function Manual mitre stop for angled cuts Hodpfoy Su H Aex Ag Ijfg Automatic label printer positioned on the pressure beam Manual label printer beside the operator control center ELECTRONICS & CONTROL: CADMATIC 4.0 Cutting optimization in the office, Schnitt-Profit V9 license

Condition: used, Year of construction: 2024, operating hours: 607 h, functionality: fully functional, machine/vehicle number: 9917348, spindle speed (max.): 24,000 rpm, feed length X-axis: 4,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 300 mm, power: 8.5 kW (11.56 HP), rapid traverse X-axis: 140 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 3,600 rpm, travel distance X-axis: 4,225 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 410 mm, type of input current: three-phase, Equipment: USB port, rotational speed infinitely variable, We are offering our machining centre for sale. The equipment is in excellent condition with very low hours on the clock; it is practically new. The centre is fully equipped with everything required and comes with a comprehensive range of accessories. Reason for sale: to upgrade our own production facilities. Hfodpfjy Su Hpox Ag Ijg

Condition: excellent (used), KS2400 with oscillating swivel function Hfedpfx Aoy Su Hieg Isg

Condition: used, Year of construction: 2022, functionality: unexamined, machine/vehicle number: 990201516, color channels: 4, resolution (max.): 1,800 dpi, paper width (max.): 1,625 mm, type of input current: three-phase, input voltage: 400 V, Canon Colorado 1650 – Professional UVgel Large Format Printer For sale is a professional large format printer, the Canon Colorado 1650, from the industrial production print segment. The Colorado series is recognized as an established production system in the field of professional roll-to-roll printing applications and is particularly used in advertising technology, display production, exhibition stand construction, and industrial large format printing. According to the supplier’s invoice, the machine was purchased in 2022. The original net acquisition value was approximately €70,000 net, including accessories and installation. The system is currently stored dry in a warehouse and presents a well-maintained overall appearance. Hodpfx Agoy Su E Ee Isfg Equipment / Scope of Delivery: - Canon Colorado 1650 - Professional roll-to-roll printing system - UVgel technology - Industrial-grade production system - Integrated control panel - Professional media handling - Industrial construction - Serial number: 990201516 Important Notes: - No verified information on operating hours available - No documented service history available - Software/RIP system not included in the offer - Sale in current condition This machine is particularly suitable for professional operators looking to acquire a high-performance production system at a significant discount compared to the new price. Viewing by appointment possible. VAT deductible. Loading and transport can be organized or supported by arrangement. Subject to prior sale and errors.

Condition: used, Year of construction: 2016, MURAT NR 242 - Profile Machining Center ¬ All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. The two machining stations for profiles with reinforcement steel increases production capacity. ¬ Stacking of 10 profiles (max. 6,5 m length). Hjdpfxjy Su Exs Ag Iofg ¬ Manual barcode labeling system integrated with single-lines. ¬ Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. ¬ Drain slot routing, drilling and routing at variable angles. ¬ Automatic screwing of reinforcement steels. ¬ Drilling of fixation, triple handle and hinge holes together with the reinforcement steel. ¬ Automatic conveyor belt system to transport scrap profiles to waste container. ¬ Waste profiles longer than 1,000 mm. can be re-processed. ¬ 17” touchscreen enables easy access and control. ¬ High performance Workstation PC with Intel® Core™ i5 3,1 Ghz microprocessor. ¬ All error messages can be monitored from the screen by the software developed by Murat Machinery Software Department. ¬ By online connection to the entire system, remote detection of malfunctions and maintenance is available. ¬ Data transfer is available via network connection or USB interface. ¬ Full integration with various window and door production software. ¬ Central lubrication system eases maintenance. Technical Features: Power supply: 400 V, 3ph, 50-60 Hz Power output: 30 kW, 80A Sawblade diameter: Æ 500 mm. Max. profile height: 140 mm. Min. profile height: 45 mm. Max. profile width: 130 mm. Min. profile width: 40 mm. Max. raw profile length: 6,500 mm. Max. profile processing length: 3,500 mm. Min. profile processing length: 400 mm. Air pressure: 6-8 bar Air consumption: 1200 l/min. Machine height: 2,350 mm. Machine length: 18,000 mm. Machine width: 10,500 mm. Machine weight: 10,800 kg.

Condition: new, Brand new electric actuator from the renowned German manufacturer AUMA. Professional device designed for industrial automation, suitable for the operation of valves, gates, dampers, and other industrial fittings. The actuator is in stock condition – unused. Robust industrial design with a manual emergency handwheel and high ingress protection class IP68. Technical data: Manufacturer: AUMA Riester GmbH & Co. KG Model: SAR 07.6-F07 Order number: 13384379 Serial number: 1417MD37537 Output speed: 22 rpm Closing torque (T zu): 30–60 Nm Opening torque (T auf): 30–60 Nm Protection rating: IP68 Operating temperature range: -30°C to +70°C Lubrication: F15 Motor data: Motor type: VE0R048-2-0.120 Power: 0.12 kW Supply: 1~ 220-240V Frequency: 50 Hz Current: 1.8 A Capacitor: 25 µF Cos φ: 0.97 Motor speed: 2800 rpm Duty cycle: S4-25% ED 1500 c/h Insulation class: F Thermal protection Protection rating: IP68 Applications: - Industrial automation - Valves and dampers - Water and process installations - Power generation - Chemical industry Hodpoy Su Erofx Ag Isfg - Industrial fittings control systems

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Hfsdpjy Su Efefx Ag Iog

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Hfsdpfx Asy Su D Ujg Ieg

Condition: used, machine/vehicle number: 462962, Temperature control unit from manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates as a single-circuit system with the RT 45 control system. Oil is used as the medium, with a maximum flow temperature of 250 °C. The heating capacity is 13.7 kW, and the pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 145 kg. Hfodpfxsy Su D Ij Ag Iog

Condition: excellent (used), functionality: fully functional, Lathe in very good condition, fully operational and functioning. The TUR 50S x 1500 mm universal lathe is a classic machine tool version produced by the Wroclaw Mechanical Devices Factory (FAT Wrocław). Geometric and weight parameters: • Maximum turning length between centres: 1500 mm • Maximum workpiece length: approx. 1600 mm Hfedpfx Agey Su Dzs Iog Key cutting and drive specifications: • Swing over bed: 500 mm • Swing over cross slide: 300 mm • Spindle bore diameter: 90 mm • Bed width: 432 mm • Main drive motor power: 7.5 kW / 11 kW (two-speed) • Number of spindle speeds: 21 mechanical steps • Spindle speed range: 18 – 1800 rpm • Tailstock quill taper: Morse taper 5 (MT5) • Tailstock quill travel: 180 mm • Rapid traverse rates: longitudinal 5.6 m/min / cross 2.8 m/min

Condition: used, machine/vehicle number: 543105, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Hfsdpfxoy Su Dno Ag Isg

Condition: used, machine/vehicle number: 543109, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Hfjdpfjy Su Dhjx Ag Ijg

Condition: used, Year of construction: 2002, machine/vehicle number: 802287/01, Temperature control unit from manufacturer Remak, used and untested. This unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with the REMAK control system. Water* is used as the medium, with a maximum supply temperature of 95 °C*. Heating capacity is 13.5 kW*, and pump performance is 66 l/min & 4.0 bar*. Year of manufacture: 2002, total weight: 90 kg. Hfedpfx Asy Su Dbjg Ieg

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Hfjdpjy Su A Rsfx Ag Ijg