Rollni 2003 Bt

Year of construction: 2008, condition: used,

Condition: used, Year of construction: 1995, operating hours: 15,599 h, lifting height: 4,170 mm, free lift: 1,440 mm, fuel type: diesel, mast type: triplex, fork length: 1,190 mm, fork width: 1,010 mm, total height: 2,100 mm, total length: 2,700 mm, total width: 1,180 mm, color: yellow, Empty weight: 4.555 kg Lifting capacity: 3.000 kg Iijdpey S Rwkofx Ag Ijb - Year: 1995 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: D177B17834S - Operating hours: 15599 - Lifting capacity: 3000kg - Lifting height: 4165mm - Overhead clearance: 2090mm - Free lift: 1440mm - Fork length: 1190mm - Maximum fork width: 1010mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Weighing system, Half cabin, Work lights, Free-lift - Mast: Triplex - Drive: Diesel - Motor brand: Isuzu - Transport dimensions: 2700mm x 1180mm x 2100mm (l x w x h) - Transport weight [kg]: 4555kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Iiodsy S Rv Topfx Ag Iob Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 747,798 km, power: 331 kW (450.03 HP), first registration: 04/2015, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: ABS, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, soot filter, spoiler, = Additional options and accessories = - CD player - Roof spoiler - Hydraulic tipping kit Iiedpjy S Rv Hefx Ag Ijb - Aluminum fuel tank - Alloy wheels - Engine brake - Particle filter - Headlights - Side skirts - Sun visor - Alternating current - Toolbox = Additional information = Tire size: 315/80 R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Alloy wheels; Steerable; Tire tread depth left: 10.6 mm; Tire tread depth right: 8.8 mm Rear axle: Double tires; Alloy wheels; Tire tread depth left inner: 5.5 mm; Tire tread depth left outer: 6.6 mm; Tire tread depth right inner: 5.4 mm; Tire tread depth right outer: 5.9 mm Unladen weight: 7,774 kg Payload: 11,226 kg GVWR: 19,000 kg Damage: None

Condition: good (used), mileage: 923,533 km, power: 330 kW (448.67 HP), first registration: 03/2018, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,170 mm, total width: 2,550 mm, total height: 3,520 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, = Additional Options and Accessories = - 2nd diesel tank - Digital tachograph - Trip recorder (control unit) - Fixed - Space Cab = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8323 kg, Gross vehicle weight: 20500 kg, Total tank capacity: 1435 liters, 2nd diesel tank, Height of fifth wheel coupling: 114 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: Space Cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Color: Multicolor, Engine manufacturer: Paccar, Engine power: 330 kW (443 hp), Euro: 6, Transmission type: AS-Tronic, Gears: 12, Power steering, ABS, ASR = Further Information = Drivetrain Engine brand: PAC Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 7 mm; Tire tread depth right: 1 mm; Suspension: Leaf suspension Axle 2: Dual tires; Tire tread depth left inside: 7 mm; Tire tread depth left outside: 5 mm; Tire tread depth right inside: 3 mm; Tire tread depth right outside: 3 mm; Suspension: Air suspension Weights Unladen weight: 8,323 kg Payload: 12,177 kg GVW: 20,500 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification Iijdpfx Ajy S Rvyeg Ijb License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Iiedpfx Ajy S Ru Asg Isb Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 6,750 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, overall weight: 3,500 kg, first registration: 03/2025, color: black, suspension: steel, number of seats: 7, fuel: electricity, Equipment: air conditioning, airbag, cruise control, navigation system, parking sensors, power assisted steering, seat heater, sliding door, E07 Hill-start assist, JA7 Blind spot assist, T56 Electric operation for left sliding door, T55 Electric operation for right sliding door, EY5 Mercedes-Benz emergency call system, EY6 Breakdown assistance, B25 Parking brake, electric, CM2 Bumpers and attachments painted in vehicle color, FS5 Illuminated mirrors for sun visors, J2A Acoustic ambient protection, LG4 Tail light, brake light and turn signal in LED technology, RK8 Alloy wheels 7 J x 17, 20-spoke design, XO7 Mercedes-Benz Mobilo with breakdown assistance and extended warranty, SE5 Lumbar support for driver's seat, SE4 Lumbar support for passenger seat, T70 Childproof lock on doors in the passenger compartment, ZC6 Sales code 1, T74 Grab handle for entry, HH4 Automatic climate control system THERMOTRONIC, UR1 Seat rail system with quick-release mechanism, XX4 Model year G4-II, CF9 Basic chassis Plus, V33 Carpet in the rear, E1E Digital extra: Hard disk navigation, V36 Headliner, E1D Digital radio (DAB), Y10 First aid kit, IB6 Model series C447 Vito/V-Class, 805 AEJ X4/1, VL2 Velour floor mats, SF2 Passenger seat, electrically adjustable, SF1 Driver seat, electrically adjustable, ES2 12 V socket in trunk/cargo area, F3Q Decorative trim EQV, VD5 Interior headliner, crystal grey, E1T Touchpad, H00 Warm air duct to passenger compartment, F3Z Comfort closing, IK3 Luxury station wagon, HI1 Climate zone 1 (cold/comfort), W64 Rear window that can be opened separately, XY5 Model year 5, US5 3-seater comfort bench seat EASY-ENTRY in 2nd row in the rear, V44 Carpet in the vehicle interior, front, C6L Multifunction steering wheel, RM4 Comfort tires, US7 Comfort seat in 1st row in the rear, right, W68 EASY-PACK tailgate, US6 Comfort seat in 1st row in the rear, left, Z42 Approved as a passenger car, MK9 Speed limiter 160 km/h, LA2 Driving, We are available by telephone Monday to Friday until 8:00 PM and Saturday until 4:00 PM!! Iedpoy S Ruvjfx Ag Isib Furthermore:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage.

Condition: used, mileage: 8,200 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, overall weight: 3,500 kg, first registration: 08/2025, color: grey, suspension: steel, number of seats: 7, fuel: electricity, Equipment: air conditioning, airbag, navigation system, parking sensors, power assisted steering, seat heater, sliding door, E07 Hill-start assist, JA7 Blind spot assist, T56 Electric operation for left sliding door, T55 Electric operation for right sliding door, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, B25 Electric parking brake, CM2 Bumpers and attachments painted in vehicle color, FS5 Illuminated mirrors for sun visors, EI0 Wireless charging system for mobile devices, J2A Acoustic ambient protection, LG4 Tail, brake and turn signal lights in LED technology, XO7 Mercedes-Benz Mobilo with extended warranty and roadside assistance, SE5 Lumbar support for driver's seat, SE4 Lumbar support for passenger's seat, T70 Childproof lock on doors in the passenger compartment, ZC6 Sales code 1, T74 Grab handle for entry, HH4 Automatic climate control system THERMOTRONIC, UR1 Seat rail system with quick-release mechanism, CF9 Basic chassis Plus, V33 Carpet in the rear, E1E Digital extra: hard drive navigation, V36 Headliner, E1D Digital radio (DAB), Y10 First aid kit, IB6 Model series C447 Vito/V-Class, VL2 Velour floor mats, 806 AEJ X5/1, ES2 12 V socket in the trunk/cargo area, F3T Decorative elements in wood-look Olive dark gray open-pore, VD5 Interior headliner crystal gray, E1T Touchpad, H00 Warm air duct to the passenger compartment, F3Z Comfort closing, IK3 Luxury station wagon, HI1 Climate zone 1 (cold/comfort), US3 3-seater comfort bench as a reclining seat in the 2nd row in the rear, W64 Rear window that can be opened separately, V44 Carpet in the vehicle interior in the front, C6L Multifunction steering wheel, RM4 Comfort tires, US7 Comfort seat in 1st row in the rear on the right, W68 EASY-PACK tailgate, US6 Comfort seat in 1st row in the rear on the left, Z42 Approval as a passenger car, MK9 Speed limitation 160 km/h, LA2 Headlight assist, RM7 Summer tires, HZ0 Auxiliary heater electric, C74 Illuminated Mercedes-Benz lettering on the entry sill. We can be reached by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! Ijdpfx Ajy S Rupjg Ijib - Errors and prior sale excepted!! - All information without guarantee ... more on our website

Condition: used, mileage: 50 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, overall weight: 2,220 kg, first registration: 05/2025, suspension: steel, number of seats: 2, total width: 1,855 mm, total height: 1,856 mm, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, 7L6 Start/Stop System, KH6 Air Conditioning with Manual Controls, 6I1 Driver Assistance System: Lane Keeping Assist (Lane Assist), 8T2 Cruise Control System (Cruise Control), KLIM Air Conditioning, 0TA Without Floor Mats, 0XX Onboard Literature in German (Export), 0YA Weight Range 1 Only Installation Control, No Demand Forecast, 0Z0 VW Brand/Class-Specific Features, 1EV Type Plate for Commercial Vehicle with EC Type Approval, With Weight Specification, With COC Papers, 1HZ Warning Signs Without Country Group, 1PA Wheel Bolts Without Wheel Locks, 1U8 Without Folding Table on Front Seat Backrest, 2WA Without Additional Winter Tires, 3ZA Without Rear Outer Seat Belts, 5F1 UWB Capable Country and Carrier Frequency 433.92 to 434.42Mhz, 5KS Without Seats in 2nd and 3rd Row, 6LG Air Vents, Front in Matte Black, 7M5 Without Entry Protection Foil for Door Sill, 8FA Without 2nd Battery, 9A0 Without Emergency Alarm System for Taxi/Rental Car, BS Titan Black/Soul-Soul/Black, ER1 Region Code 'ECE' for Radio, F0A Not a Special-Purpose Vehicle, Standard Version, G02 Front Dampers, L30 Spring Range 30 Only Installation Control, No Demand Forecast, M0H Diesel Engine 2.0 L/75 KW TDI Common-Rail Base Engine is: T29/TQ4/T0P/T6M/T1Q, NY0 Standard Battery/Alternator, PLANTCODE:035 Volkswagen Poznan Sp. z o.o., Poznan, QE0 Without Waste Bin, T6M 4 Cylinder Engine 2.0L Unit 05L.C, U5A Instrument Cluster (km/h), Display for Speed, Total/Trip Distance, Engine Speed, Fuel Level and Clock, UC7 Rear Dampers, High Suspension Chassis, V0A Tires without Specification of Tire Brand, VF0 Standard Foot Pedal Assembly, Z65 Radio Composition with 10" Touch Colour Display, ZVG Techn. You can reach us by phone Monday - Friday until 8:00 p.m. and Saturdays until 4:00 p.m.! Further Information: Leasing/financing and trade-in possible! Errors and prior sale excepted! All information without guarantee ... more on our homepage Iisdoy S Ruijpfx Ag Isb

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned Iiedpsy S Rtlsfx Ag Ieb All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Siemens control system, Iiedsy S Rtfopfx Ag Ieb Chip conveyor, Jaw liner, Chip conveyor, Manuals.

Year of construction: 2014, condition: used, Industrial water treatment and distillation system for the treatment of industrial wastewater and process water, with integrated control, collection tanks, and a new pump following a recent inspection. Manufacturer: H2O GmbH Model: VACUDEST XS-XL Machine type: Industrial water treatment system Year of manufacture: approx. 2014 Iijdpfxjy S Rr Ue Ag Ijb Operating manual available Control with touchscreen HMI USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Inspection recently carried out Collection tank for industrial wastewater available Collection tank for distillate available Tank material: PP gray Medium: Industrial wastewater Medium: Distillate Medium: Acidic and alkaline aqueous solution Tank volume, industrial wastewater: approx. 10,280 liters Tank volume, distillate: approx. 10,732 liters Tank volume, VacuCIP tank: approx. 1,306 liters Permissible operating temperature, tanks: 40 °C Permissible operating temperature, VacuCIP tank: 80 °C Specific weight, tanks: 10.00 kN/m³ Specific weight, VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar VacuCIP alkaline 1.26 pH value: >12 Concentration: 1:10 Closed industrial design Pipeline and tank system made of stainless steel and plastic.

Condition: used, Year of construction: 2018, operating hours: 12,155 h, lifting height: 4,930 mm, free lift: 1,680 mm, fuel type: electric, mast type: duplex, fork length: 1,000 mm, fork width: 1,030 mm, total height: 2,300 mm, total length: 2,320 mm, total width: 1,190 mm, color: silver, Empty weight: 4.863 kg Lifting capacity: 2.500 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516345J00290 - Operating hours: 12155 - Lifting capacity: 2500kg - Lifting height: 4930mm Iiodjy S Rr Iopfx Ag Ieb - Overhead clearance: 2300mm - Free lift: 1680mm - Fork length: 1000mm - Maximum fork width: 1030mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Joystick, Work lights, Heating, Free-lift, Half cabin - Mast: Duplex - Drive: Electric - Brand/Type: 4PzS 620 - Battery year of construction: 2019 - Capacity: 620Ah - Battery voltage: 80V - Transport dimensions: 2328mm x 1199mm x 2300mm (l x w x h) - Transport weight [kg]: 4863kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2017, operating hours: 5,872 h, lifting height: 3,030 mm, fuel type: electric, mast type: duplex, fork length: 1,040 mm, fork width: 920 mm, total height: 2,060 mm, total length: 2,030 mm, total width: 1,090 mm, color: silver, Empty weight: 3.100 kg Lifting capacity: 1.600 kg - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516212H00086 - Operating hours: 5872 - Lifting capacity: 1600kg - Lifting height: 3030mm - Overhead clearance: 2060mm - Free lift: 0mm Iijdpfxey S Rrze Ag Isb - Fork length: 1040mm - Maximum fork width: 920mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Heating, Full cabin, Joystick, Work lights, Non-marking tires - Mast: Duplex - Drive: Electric - Brand/Type: 05 EPZS 625 SC - Battery year of construction: 2021 - Capacity: 625Ah - Battery voltage: 48V - Transport dimensions: 2037mm x 1099mm x 2060mm (l x w x h) - Transport weight [kg]: 3100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, empty load weight: 50,800 kg, year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. Iijdpfsy S Rrujx Ag Ijb The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Control system for Traub TX8F, Turret, Tailstock, Chuck jaws, Chip conveyor, Iiodpfey S Rrnsx Ag Ijb Manuals.

Condition: used, Year of construction: 2008, Manufacturer: Haarslev Model: HFMI2000 / HF300GH Year: 2008 Condition: Used Serial number: 305649 Stock number: 3366 Mixer: double paddle mixer Capacity: 2000 liters Plate diameter: 300 mm Infeed height: 2850 mm Iisdpfx Asy S Rrhog Isb Discharge height: 950 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 88kW Dimensions: 4950 x 3550 x 3550 mm Mixer cooled with nitrogen injection. Haarslev HF10 product hopper of 2000 liters with ribbon mixer and 11kW pump. Haarslev HF300GH 300mm mincer head of 55kW. Includes two accessory carts.

Condition: used, Year of construction: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Iodpoy S Rrbofx Ag Ijib Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Iiodpfjy S Rq Rox Ag Isb Vertical miter range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Machine width: Weight: 300 kg

Condition: used, Slider length: 2500 mm Cutting width at the fence: 1000 mm Cutting width at the rip fence: 2800 mm Cutting depth: 120 mm Scoring saw: no Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Fence adjustment: manual Saw blade angle display: scale Iiodpfx Agsy S Rq Do Iob Cutting height display: - Fence display: scale Rip fence scale: scale Saw blade diameter: max. 400 mm Speeds: 2800 / 4000 / 5500 Motor power: 5.5 kW Dust extraction port: 120 mm Machine length: 3000 mm Machine width: 1800 mm Weight: approx. 1300 kg

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Iiedpoy S Rqwsfx Ag Ijb Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, power: 110 kW (149.56 HP), pressing force: 1,600 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,600 mm, distance table to ram: 870 mm, overall weight: 141,500 kg, Manufactured by Voronezh plant (Russia) Year of manufacture 1985 Capacity, ton 1600 Slider stroke, mm 400 Strokes per minute 16 Table size, mm 1600 x 1600 Ram dimensions, mm 1600 x 1600 Slider adjustment, mm 220 Max distance between table and slider, mm 870 Slider ejector capacity, ton 80 Slider ejector stroke, mm 100 Motor capacity, kW 110 Isdpfxoy S Rqqs Ag Isib Press dimensions, mm 4670 x 4370 x 8110 Press weight, kg 141500 1600 ton single–crank mechanical press K04.150.242. Robust closed-type design, suitable for large dies and high-force sheet metal operations. This press is in excellent condition.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 610 mm, spindle bore: 130 mm, turning diameter: 1,000 mm, center height: 500 mm, turning length: 3,000 mm, quill diameter: 160 mm, quill travel distance: 300 mm, total length: 6,350 mm, total width: 2,190 mm, total height: 1,810 mm, spindle speed (max.): 315 rpm, spindle speed (min.): 3 rpm, swing diameter over cross slide: 610 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 120 mm, metric thread steps: 44, bed width: 755 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, Maximum turning diameter: 500 mm Distance between centers: 3000 mm Bed width: 755 mm Diameter of swing over bed: 1000 mm Diameter of swing over carriage: 610 mm Iiodpfjy S Rqdox Ag Isb Spindle bore: 130 mm Spindle nose: D1-15/Short taper 15 Spindle speed range: 3.15 - 315 rpm (21 steps) Longitudinal feed range: 0.1 - 12 mm/rev, 57 steps Cross feed range: 0.05 - 6 mm/rev, 57 steps Rapid traverse rate longitudinal/cross: 3700/1850 mm/min Metric threads: 1 - 120 mm, 44 steps Inch threads: 3/8 - 28 TPI, 31 steps Module threads: 0.5 - 60 mm, 45 steps Diametral threads: 1 - 56 DP, 38 steps Tailstock quill diameter: 160 mm Quill mounting: MK 6 Quill travel: 300 mm Motor power: 22 kW Weight: 14,400.00 kg Dimensions: 6350 x 2190 x 1810 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, Toyoda FH 550, Year of manufacture 2005, Iiedpfoy S Rp Tjx Ag Iob Fanuc 31i MA control system, Travel range X/Y/Z 750/800/850 mm, Pallet size 550 x 500 mm, Spindle speed up to 15,000 rpm, 60-tool automatic tool changer, BT 40, Coolant system, 70 bar, Chip conveyor.

Condition: used, The Roversi butter churn 800 litres is a large-scale butter churn designed for industrial use, particularly in dairy processing facilities or large-scale butter production operations. Here are some general features and information about such a butter churn: - Capacity: The churn is designed to handle up to 800 litres of cream at a time, making it suitable for large batches of butter production. - Construction: Typically made from high-quality stainless steel, which ensures hygiene, durability, and easy cleaning. This material is resistant to corrosion and is ideal for food processing equipment. - Design: Roversi churns often feature a modern design with user-friendly controls. They may include options for automatic or manual operation, depending on the model. - Performance: These churns are engineered for efficient butter production, enabling quick turnover of cream to butter, which is essential for commercial operations. - Applications: Suitable for dairy farms, creameries, and food manufacturers who require an efficient method for butter production. - Efficiency: Operating at optimal speeds and times ensures that the cream is churned properly, resulting in high-quality butter with desired texture and flavor. Iisdpfoy S Rptex Ag Ijb - Features: Some models may include features such as temperature control, agitator speed adjustment, and safety mechanisms. Capacity: 800 / 1000 Litres Cream Capacity: 500 Litres Butter Outlet : 250-300 kg per batch Minimum Cream Capacity: 100 litres Electrical Requirements: 3 Phase 50/60 hz Internal Kneaders: Equipped with Internal Kneaders Jacket Constriction: Double Jacket Stainless steel Gears: Slow speed with kneading process and Fast speed for cream to be turned in to butter Construction: Stainless steel Barrel with steal frame with new paint job Gear activation: Gearbox Available: Immediately