Europlastic Maschinenhandel e.K.

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Fgsdpfxs Ai Elws Ah Esi Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Fgsdpfe Ai Eldex Ah Eei Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2006, operating hours: 65,700 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, overall weight: 10,500 kg, Equipment: documentation/manual, Nitrogen injection, Fede Airirjpfx Ah Esgi 2 cores, 4 tool heating zones.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, overall weight: 10,000 kg, warehouse no.: 503724 manufacturer: Wittmann Battenfeld type: Vpower 120-350 R1300 controller: Unilog B8 year of construction: 2021 Fsdpfj Aiq Enjx Ah Esgi clamping force: 1200 kN distance between tie-bars h x v: 1160 x mm size of mould plates h x v: 740 x 580 mm min. mould height: 250 mm max. open daylight: 600 mm opening stroke: 350 mm round table diameter: 1300 mm screw diameter: 30 mm swept volume: 106 ccm injection pressure: 2835 bar An additional plasticizing unit is also available for changing with the following technical specifications: Screw diameter: 18 mm Stroke volume: 22.9 ccm Specific injection pressure: 3000 bar measures of machine l x w x h: 4.4m x 2.09m x 3.8m total weight: 10000KG equipment included screen text german core pulling pneum. 2 x injection unit extremely wear resistant and corrosion resistant interface EUROMAP 63 interface OPC

Condition: used, Year of construction: 2007, This KRAUSS MAFFEI injection molding machine, KM650-2700 C2, will be auctioned off online in our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - injection molding machines, temperature control units, storage racks and various other items. You can find this and many other items on our platform. Fsdpfx Ahs Aiqpye Esgi

Condition: used, Year of construction: 2001, This KRAUSS MAFFEI injection molding machine, model KM 420-2700 C2, will be auctioned online as part of our industrial auction / machinery auction hosted by Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. Fgjdpfx Aho Aiqn Ae Esi You can find this and many other items on our platform.

Condition: used, Year of construction: 2000, This KRAUSS MAFFEI injection molding machine, KM 500-2700 C2, will be auctioned online as part of our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. Fgedpfx As Aiqnqeh Eei You can find this and many other items on our platform.

Condition: used, Year of construction: 2001, This KRAUSS MAFFEI injection molding machine, model KM 125-390 C2, will be auctioned off online in our industrial auction / machinery auction, Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks, and various other items. Fgedpe Aiqlvefx Ah Esi You can find this and many other items on our platform.

Condition: used, Year of construction: 1999, functionality: fully functional, Injection molding machine KraussMaffei KM 800-5700 MC – Year of manufacture: 1999 Technical data: Manufacturer: KraussMaffei Model: KM 800-5700 MC Year of manufacture: 1999 Clamping force: 8,000 kN (800 t) Screw diameter: 105 mm Operating hours: approx. 82,540 h 4 core pulls 1 air valve AS Tool mounting height: min. 600 mm, max. 1,100 mm Closing stroke: 1,400 mm Platen size: 1,300 × 1,300 mm Tie bar spacing horizontal: 1,120 mm Fgodpfx Ahj Aif E Ij Eoi Tie bar spacing vertical: 1,000 mm Centering ring: 250 mm 8 water circuits each Equipment: Conveyor belt Enclosure Handling system Condition: The machine is functional and can be tested. In 2025, the machine was inspected by KraussMaffei, and the pump connections were resealed. Location: Thuringia, Germany _____ Subject to prior sale and errors in technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 1998, functionality: not functional, machine/vehicle number: 154322, clamping force: 1,500 kN, overall weight: 7,100 kg, Overall machine condition is good. Fgsdpfx As Aid Nheh Eji Machine was working in production until plant operations were stopped. Machine was stored into a warehouse in 2024. Since then it has not been in use. Machine is not connected to power outlet, battery from the electronic plate has drained. Therefore some data is missing from the machine. Machine powers up, but it is not functional at this moment. Location - Estonia, Hiiumaa.

Condition: like new (used), Year of construction: 2019, operating hours: 3,123 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, Equipment: documentation/manual, The machine is immediately available in our Hannover/Germany warehouse and has been tested. ### Technical Data Manufacturer: Wittmann Type: SmartPower 60/210 Serial Number: Year of Construction: 2019 Operating Hours: 3,123 h Control System: Unilog B8 New Price: 75,000 euros Functionality: fully functional Condition: excellent ### Special Features Injection unit 210 Screw diameter: 35 mm Shot weight: 130 g/shot Injection pressure: 1500 bar (increased) Injection volume: 144 ccm Fgjdpfxs Aiccpo Ah Esi Clamping force: 600 kN / 60 tons Tie bar spacing: 370 x 320 (h x v) Platen dimensions: 540 x 480 mm (h x v) Tool mounting height: 200 mm Maximum platen distance: 600 mm Ejector stroke/force: 150 mm / 26.4 kN Clamping unit: hydraulic Dimensions L/W/H: 3.6 x 1.3 x 1.9 m Weight: 3100 kg ### Extras - Centralized ejector with core pull device - Injection cylinder with hard chrome plating - Highly wear-resistant plasticizing unit (up to 350 °C) - Safety guard widened by approximately 550 mm - 4-way cooling water flow regulator - 21.5-inch multi-touch screen in Full HD ### Warranty - Warranty until first commissioning ### Freight *Various options are available* ##### Freight: Truck Loading - Free loading onto the buyer's truck or free delivery to your location with freight charges from the Hannover/Germany warehouse ##### Freight: Worldwide Delivery - Organization of worldwide delivery by container or box including customs clearance available ### Financing - Available upon request - lease purchase option ### Price - Available upon request ### Dealer Information You can inspect all of our machines in operation at our facility and, by appointment, receive a functional guarantee for most machines. - Tested and acquired from the original owner from ongoing production (no insolvency stock) - Exclusively from our own stock and property (no brokerage) - Immediate availability - Quality management in processing - Contractual security - Short response times and fast processing - Worldwide delivery including customs clearance possible #### Purchase - We purchase well-maintained injection molding machines (25T to 600T clamping force) from 2010 onwards. - Offer submission within 24 hours on working days. - In case of agreement: immediate transfer. No brokerage or other contractual loopholes. Over 30 years of company history as a supplier to the plastics industry. Rely on quality, trust and fair business practices.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 64977, total length: 4,000 mm, total width: 1,000 mm, total height: 1,900 mm, overall weight: 3,200 kg, Equipment: documentation/manual, Our KraussMaffei plastic processing machine is for sale. If you are intrested send an e-mail for me with your quetions. Fedpfe Ah Sm Hjx Ah Ejgi Thank you.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, overall weight: 8,000 kg, Equipment: documentation/manual, We offer a ready-to-use Arburg ALLROUNDER 520 C 2000-675 injection molding machine, manufactured in 1996. Manufacturer: Arburg Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1996 Condition: Ready for operation Machine type: Injection molding machine If you have any questions or require further information, please send us a message or contact us by phone. The machine is sold without warranty. Fodpfx Ahe Ah Rrws Eogi

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, injection pressure: 2,000 bar, injection weight: 618 g, overall weight: 14,700 kg, | Locking mechanism | Hydraulic | | Tool height min. [mm] | 330 | | Maximum tool opening stroke [mm] | 1150 | | Permissible tool diameter min., horizontal × vertical [mm] | 441 | | Maximum tool weight [kg] | 3430 | | Distance between columns, horizontal [mm] | 630 | | Distance between columns, vertical [mm] | 630 | | Dimensions of clamping plates, horizontal × vertical [mm] | 995 × 1050 | | Centering flange diameter, side A [mm] | 120 | | Centering flange diameter, side B [mm] | 160 | Fjdpfs Ah Rmgox Ah Eogi | Thread in the clamping plate of the injection molding machine | M20 | | Maximum ejector stroke [mm] | 200 | | Maximum ejector pin on the tool [mm] | 450 | | Thread in the ejector plate of the injection molding machine | M20 | | Ejector force [kN] | Forward 58 / reverse 28 | | Tool opening force [kN] | 160 | | Tool clamping force according to Plaston standard | 5990 | Wittmann robot: W 621-0977 Year of manufacture 2003

Condition: excellent (used), functionality: fully functional, overall weight: 15,000 kg, Year of manufacture: 2020 Manufacturer: Sodick Machine model: AG60L Machine type: Wire EDM machine / Sink EDM Control system / Operation: LN2 CNC control, 15" touchscreen 200 V, 3 phases, 50/60 Hz, 10 kVA Rated current / RMS sym. Amps: 29 A / 50 A Operating hours: 3600 erosion hours Fjdpfxj Ah Rk Ej Ah Esgi

Condition: good (used), Year of construction: 1997, Arburg 520 V-2000-675/150 Clamping force: 200 tons Fgjdpfx Ae Ah Iuuoh Eji Year of manufacture: 1997 Screw diameter: 50 mm + 35 mm Mold spacing: 52 x 52

Condition: excellent (used), Year of construction: 2013, WITTMANN BATTENFELD MACRO POWER E450/2250 INJECTION MOLDING MACHINE Manufacturer: Wittmann Battenfeld GmbH, Austria Model: MacroPower E450/2250 Year of Manufacture: 2013 Fsdpfx Aj Ah Hkheh Eegi Control System: UNILOG B6 Type: Hybrid, horizontal injection molding machine Machine Number: 134481-100 Operating Hours: 76,623.41 h 1. CLAMPING UNIT Clamping Force: 4500 kN / 450 tons Tie Bar Spacing (H × V): 950 × 700 mm Minimum Mold Height: 330 mm Maximum Mold Height: 780 mm Electric Ejector System Ejector Force: 60 kN Ejector Stroke: 180 mm 2. INJECTION UNIT Screw Diameter: 65 mm Maximum Injection Weight: 980.9 g Maximum Injection Pressure: 2070 bar Maximum Injection Speed: 400 mm/s Servo-electric Drive for the Injection Unit Knödler Drive Screw with Check Valve 3. DRIVE AND CONTROL Hybrid Drive UNILOG B6 Control System Servo S0 Package ServoPower S1 Package – hydraulic pump speed control Integrated Filtration System Control System in Polish Operating Hour Counter: 76,623.41 h 4. ADDITIONAL EQUIPMENT Compressed Air Valve Cooling Water Flow Regulator Digital Interface for Controlling up to Six Thermoregulators Interface for Controlling Valve Pins in the Mold Interface for External Hot Runner Controller Integration with Wittmann W8xx Series Robots Quality Control Button Electric Ejector Integrated Hydraulic Filtration System

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, functionality: fully functional, clamping force: 132 kN, screw diameter: 135 mm, injection pressure: 1,390 bar, injection weight: 7,729 g, KraussMaffei KM 1300-12000 MX + KUKA Robot! TECHNICAL DETAILS Fgedpfx Aj Ah D Dyeh Eei Clamping Unit Clamping force: 1,300 t Opening stroke / mounting height: max. 2,300 mm Distance between tie bars: max. 4,000 mm Mold mounting height: min. 1,000 mm / max. 1,700 mm Tie bar height: max. 1,910 mm Mold size: min. 1,000–1,700 mm Clear tie bar spacing: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm Injection Unit Screw diameter: 135 mm Displacement volume: 8,588 cm³ Injection pressure: 1,390 bar Shot weight: 7,729 g PS MACHINE DETAILS Core pulls, ejector side / nozzle side: 1 / 1 Pneumatic needle closures: 1 Operating hours: 81,000 h EQUIPMENT KUKA robot

Condition: good (used), Year of construction: 2011, _Technical specifications:_ • Clamping force: 420 tons (4,200 kN) • Injection unit: 3440 Fjdpfo Ah Dvkjx Ah Ejgi • Screw diameter: 80 mm • Screw L/D ratio: 25 • Maximum injection speed: 300 mm/s • Maximum screw speed: 280/240 rpm • Ejector force: 120 kN (boost 180 kN) • Reinforced clamping drive • Dry cycle time:

Condition: excellent (used), Year of construction: 2015, operating hours: 54,244 h, machine/vehicle number: 231099, clamping force: 2,200 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, injection weight: 359 g, mold height (min.): 350 mm, ejector force: 70,000 N, ejector stroke: 200 mm, MACHINE WITH DOCUMENTED PURCHASE EVALUATION I offer a used Arburg Allrounder 570 S 2200-800, manufactured in 03/2015, with Multilift Select and protective enclosure. The redacted purchase evaluation documents the seller's information regarding technology, condition, maintenance, and equipment. TECHNICAL DATA Fgede Ahzy Hjpfx Ah Eji Clamping force: 2,200 kN / 220 t Control system: Selogica Injection unit: 800 Screw: 50 mm Shot weight: 359 g PS according to seller's form Tie bar spacing: 570 x 570 mm Platen dimensions: 790 x 790 mm Minimum mold height: 350 mm Opening: 1,000 mm according to seller's form Ejection stroke / force: 200 mm / 70 kN Pump operating hours: 54,244 h Automatic operating hours: 48,230 h Operating hours according to control system photo dated 04.11.2026 Machine number: 231099 Total connection according to nameplate: 105 kW; 400 V, 3 ~, 50 Hz HANDLING AND EQUIPMENT Multilift Select transverse, 15 kg load capacity, No. 605572 X/Y/Z: 900/1,000/1,600 mm X-axis synchronized with ejector for precise part removal B- and C-axis pneumatic 4 x vacuum, 4 x gripper double-acting Customer-side inputs and outputs Protective enclosure 12 hot runner zones 2 core pulls, 2 blow functions Interfaces for temperature control unit and dryer Controlled pump, IE2 according to seller CONDITION AND AVAILABILITY Regularly maintained; last maintenance according to seller, internally in September 2026. No known defects or outstanding repairs are stated in the seller's form. The purchase evaluation is a documented seller's statement. Available according to the seller's form from the beginning of 2027. Price on request. I would be happy to discuss inspection, delivery, and payment terms with you personally.

Condition: used, Year of construction: 2007, operating hours: 47,205 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 80 mm, injection pressure: 1,829 bar, overall weight: 22,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 420 V, input current: 482 A, Krauss Maffei KM 320-2700 C3 injection molding machine for sale Due to the renewal and expansion of our production capacity, we are offering our Krauss Maffei KM 320-2700 C3 injection molding machine for sale. The machine is currently fully connected and operational in our production facility. This allows potential buyers to view and test the machine in working condition, subject to serious interest. Technical specifications Manufacturer: Krauss Maffei Type: KM 320-2700 C3 Year of manufacture: 2007 Clamping force: 320 tons Injection unit: 2700 Screw diameter: 80 mm Serial number: 61009058 Machine weight: approx. 22,000 kg Total operating hours: 47,205 hours Production hours: 39,180 hours Control system: Krauss Maffei MC4 Condition of the machine The machine is complete and is currently installed in our production environment in the Netherlands. The machine is operational and connected, which allows for inspection while powered on and a demonstration of its operation. The machine is being sold due to a change/renewal of our production capacity, not because the machine is out of service. Inspection and availability The machine is located in the Netherlands/Bodegraven and is currently connected and being used for production. Inspection is possible by appointment. If there is serious interest, the machine can be demonstrated in working condition. Fjds Ahy D Sepfx Ah Esgi Additional photos, technical data, and a video of the machine in operation are available upon request. Location: Netherlands/Bodegraven Condition: used, operational Availability: by arrangement

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 300-1400 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 300-1400 CX Year of Manufacture: 2019 Serial Number: 61032709 Machine Type: Hydraulic injection molding machine for plastics Clamping Force: 3000 kN / 300 tons Screw Diameter: 60 mm Control System: KraussMaffei MC6 Robot: KraussMaffei LRX100 Additional Equipment: Safety guard and conveyor Machine Description Fgedpfxo Ahx A Ie Ah Eoi We offer a KraussMaffei KM 300-1400 CX injection molding machine, manufactured in 2019, with a clamping force of 3000 kN (300 tons), equipped with a KraussMaffei LRX100 linear robot, a safety guard, and a conveyor. The machine features a fully hydraulic clamping system and a modern KraussMaffei MC6 control system, based on an industrial PC with real-time Ethernet technology. The control system is equipped with an integrated 19-inch operator panel with a color touchscreen. The injection molding machine has a complete plasticizing unit for thermoplastics with a 60 mm diameter screw, a check valve, and an open nozzle. TECHNICAL DATA Clamping Unit Clamping Force: 3000 kN / 300 tons Mold Opening Force: 169 kN Platen Dimensions (H × V): 995 × 1050 mm Column Spacing (H × V): 630 × 630 mm Mold Opening Stroke: 820 mm Minimum Mold Height: 330 mm Maximum Distance Between Platens: 1150 mm Ejector Stroke: 200 mm Ejector Force (forward / backward): 58 / 28 kN Injection Unit Screw Diameter: 60 mm L/D Ratio: 20.8 Maximum Injection Pressure: 2006 bar Injection Volume: 679 cm³ Injection Weight: 618 g Injection Speed with Accumulator (option 70.25): 300 mm/s Volumetric Injection Capacity with Accumulator (option 70.25): 848 cm³/s Screw Speed: 260 rpm Nozzle Radius: 15 mm Nozzle Orifice Diameter: 6 mm Plasticizing Unit for Thermoplastics with Check Valve Electrical and Hydraulic Equipment Control System: KraussMaffei MC6 Operator Panel: 19-inch, color, touchscreen Rated Power of Pump Motor: 45 kW Installed Heating Power: 22.4 kW Dry Cycle Time / Stroke According to EUROMAP 6: 2.7 s / 441 mm Hydraulic Oil Tank Capacity: 720 l Robot and Additional Equipment Linear Robot: KraussMaffei LRX100 Safety Guard Conveyor for Receiving and Transporting Molded Parts Dimensions and Weight Length: 6150 mm Width: 2170 mm Height: 2250 mm Net Machine Weight with Control Cabinet: 12,200 kg / 12.2 t

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 161-750 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 161-750 PX Year of manufacture: 2019 Machine type: Electric injection molding machine for plastics Clamping force: 1600 kN / 160 tons Screw diameter: 60 mm Injection unit: SP 750 Machine description We offer a KraussMaffei KM 161-750 PX injection molding machine, manufactured in 2019, with a clamping force of 1600 kN (160 tons), equipped with an SP 750 injection unit and a 60 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 1600 kN / 160 tons Mold opening force: 240 kN Column spacing (H × V): 585 × 535 mm Mold opening stroke: 450 mm Minimum mold height: 200 mm Maximum mold height: 500 mm Maximum distance between platens: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 33 / 16 kN Maximum mold weight: 2000 kg Injection unit SP 750 Screw diameter: 60 mm L/D ratio: 21.3 Maximum injection pressure: 1564 bar Injection volume: 475 cm³ Injection weight: 432 g Injection speed: 125 mm/s Volumetric injection rate: 297 cm³/s Screw speed: 458 rpm Installed heating power: 18.0 kW Nozzle pressure force: 42 kN General data Drive power: 20.0 kW Dry cycle time / stroke according to EUROMAP 6: 1.9 s / 410 mm Oil tank capacity: 200 l Dimensions and weight Length: 6400 mm Width: 1990 mm Height: 2010 mm Machine weight: 10,200 kg / 10.2 t Fsdpo Ahxzfefx Ah Esgi

Condition: as good as new (ex-display), Year of construction: 2021, KraussMaffei KM 160-750 PXA Injection Molding Machine Manufacturer: KraussMaffei Model: KM 160-750 PXA Year of Manufacture: 2021 Machine Type: Electric Injection Molding Machine Fgodpfx Ahe Ahxyhj Eji Clamping Force: 1600 kN / 160 tons Screw Diameter: 50 mm Control System: KraussMaffei MC Agile Robot: KraussMaffei LRX Machine Description We offer a KraussMaffei KM 160-750 PXA injection molding machine, manufactured in 2021, with a clamping force of 1600 kN (160 tons), equipped with a KraussMaffei LRX linear robot. The machine features a 5-point, double-toggle clamping unit with a three-platen design, with servo-electric driven axes. The injection unit is equipped with electric drives responsible for injection, plasticizing, and the movement of the injection unit. The modern KraussMaffei MC Agile control system utilizes real-time Ethernet technology, enabling precise control of the production process. The machine is equipped with a complete plasticizing unit with a 50 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 1600 kN / 160 tons Mold Opening Force: 240 kN Clamping System: 5-point, double-toggle, three-platen design Clamping Drive: servo-electric Mounting Plate Dimensions (H × V): 770 × 720 mm Column Spacing (H × V): 570 × 520 mm Mold Opening Stroke: 450 mm Minimum Mold Height: 300 mm Maximum Mold Height: 600 mm Maximum Daylight Between Platens: 1050 mm Ejector Speed: 300 mm/s Injection Unit Screw Diameter: 50 mm L/D Ratio: 20.2 Maximum Injection Pressure: 1892 bar Injection Volume: 393 cm³ Injection Weight: 357 g Injection Speed: 200 mm/s Volumetric Injection Rate: 393 cm³/s Screw Speed: 267 rpm Plasticizing Rate: 36.5 g/s Nozzle Radius: 10 mm Nozzle Orifice Diameter: 4 mm Injection Drive: electric Plasticizing Drive: electric Injection Unit Movement Drive: electric Electrical Equipment Control System: KraussMaffei MC Agile Connected Power: 31.2 kW Installed Heating Power: 15.5 kW Number of Adjustable Cylinder Heating Zones: 5 Dry Cycle Time / Stroke according to EUROMAP 6: 1.86 s / 399 mm Linear Robot Manufacturer: KraussMaffei Series: LRX Type: Linear robot for injection molding machine service Application: Automation of part removal and handling Machine Dimensions and Weight Length: 5650 mm Width: 1820 mm Height: 1950 mm Net Weight: 8500 kg / 8.5 t

Condition: as good as new (ex-display), KraussMaffei KM 120-380 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 120-380 PX Year of Manufacture: 2023 Machine Type: Servo-electric injection molding machine with a servo-hydraulic system Clamping force: 1200 kN / 120 tons Screw diameter: 40 mm Control system: KraussMaffei MC6 Machine Description We offer a KraussMaffei KM 120-380 PX injection molding machine, manufactured in 2023, with a clamping force of 1200 kN (120 tons), equipped with a modern, 5-point, double-toggle clamping system with servo-electric drive. The machine features a servo-electric drive for injection and plasticizing, and a servo-hydraulic drive for the injection unit movement. It is equipped with an HPS-Mixing plasticizing unit with a 40 mm diameter screw, ensuring efficient plasticization and homogenization of the plastic. The KraussMaffei MC6 control system is based on an industrial computer with real-time Ethernet technology. TECHNICAL DATA Clamping Unit Clamping force: 1200 kN / 120 tons Mold opening force: 180 kN Clamping system: 5-point, double-toggle, 3-plate Clamping drive: servo-electric Mounting plate dimensions (H × V): 640 × 590 mm Column spacing (H × V): 470 × 420 mm Mold opening stroke: 400 mm Minimum mold height: 180 mm Maximum mold height: 550 mm Maximum distance between plates: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 22 / 10 kN Injection Unit Plasticizing system type: HPS-Mixing Screw diameter: 40 mm L/D ratio: 20.0 Maximum injection pressure: 1860 bar Injection volume: 201 cm³ Injection weight: 183 g Injection speed: 125 mm/s Volumetric injection rate: 157 cm³/s Screw speed: 334 rpm Fgjdpe Ahxw Rofx Ah Eoi Plasticizing rate: 24.7 g/s Nozzle radius: 10 mm Nozzle orifice diameter: 4 mm Injection and plasticizing drive: servo-electric Electrical and Hydraulic Equipment Control system: KraussMaffei MC6 Connected power: 13.8 kW Electrical protection: 63 A Installed heating power: 11.5 kW Number of adjustable heating zones in the cylinder: 5 Dry cycle time / stroke according to EUROMAP 6: 1.5 s / 329 mm Oil tank capacity: 120 l Machine Weight Net weight: 6900 kg / 6.9 t