Real Glass Srl

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 10,881 h, load capacity: 13,600 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, power: 140 kW (190.35 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,100 kg, total length: 5,150 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift - Diesel Load center: 1200 Mast type: Duplex Transmission: Clark HR28000 Condition: Operational and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: 12.00-20 Hfjdpfjx H Dblox Ag Der Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 12.00-20 Rear tires condition: 20 - 40% Sideshift, fork positioner,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty container stacker Load center: 1220 Mast type: Duplex Transmission: ZF WG211 automatic 5/3 Condition: Ready for use and fully functional Hedpfx Aex H Dbfjg Dofr Technical condition: very good Front tires type: Superelastic Front tires Size: 14.00-24 Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Size: 14.00-24 Rear tires Condition: 40 - 60% Elme 584 sidespreader 20ft-40ft with hooks and hydr. clamp for double box lifting, hydr. center levelling of spreader +/-3°, hydr. sideshift +/- 600mm DE: hydr. extendable spreader support device on lift mast, lift suspension by hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast inclination and whether container is/are clamped, electric motor preheating (230V), one-touch function on joystick for automatic spreader adjustment 20'-40', driver's cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating, EN: hydr. spreader support device on lift mast (for safety of container checker), lifting suspension by hydr. accumulator, engine pre-heater (230V), central greasing system, air condition, drive speed limitation depending on lifting height and tilting angle of mast, one touch function on joystick for automatic spreading of spreader 20-40, air-cushioned driver seat, passenger seat, sun blinds at roof and rear windows condition: checked, repaired, serviced and cleaned = ready for work

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,600 h, load capacity: 32,000 kg, fuel type: diesel, power: 168 kW (228.42 HP), empty load weight: 8,500 kg, drive type: Diesel, construction width: 2,500 mm, Terminal tractor Transmission: Allison 3000RDS Condition: Ready for use and fully functional Technical condition: very good Front tires: size 11R22.5 Front tires: condition: 80-100% Rear tires: size 11R22.5 Rear tires: condition: 80-100% Hfjdpfsx H Da Uex Ag Djr Air conditioning, air-suspended rear axle with lowering function, air-suspended driver seat, digital display, FM radio with MP3, USB, exterior mirrors, electrically adjustable and heated, fully serviced by Kalmar, exhaust muffler + SCR sensors are new

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,993 h, load capacity: 1,400 kg, lifting height: 3,244 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,190 mm, fork length: 1,150 mm, drive type: Elektro,

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Surface planer unit Hjdpfjx H Dazox Ag Dofr 3-knife automatic cutterblock Tilting fence 90° - 45°, anodized Planing width: 310 mm Planing table length: 1400 mm Max. depth of cut: 4 mm Thicknessing planer unit Thicknessing width: 306 mm Thicknessing height: 4 - 225 mm Thickness table length: 540 mm Feed speed: 6 m/min Availability: approx. mid-January 2026

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: Cutting length: 5300 mm Hjdpfxsx H Dauo Ag Dofr Cutting height: 2200 mm Saw blade diameter: 300 mm Motor: 4.4 kW Availability: approx. end of January 2026 Location: NRW

Condition: used, Used machine Max. pass-through width at cutting angle 40°: 250 mm at cutting angle 60°: 165 mm Max. pass-through height: 180 mm Cutting angle adjustable: 0 – 60° Feed rate: 75 m/min Table height: 650 mm Table size: 1150 x 650 mm Blade: 335 x 66 x 8 mm Motor power: 1.5 kW Electrical connection: 400 V Dimensions: 1230 x 860 x 1270 mm Weight: 385 kg Availability: approx. end of January 2026 Location: NRW Hfodpfx Agsx H Dane Dor

Condition: used, Year of construction: 2022,

Condition: new, Year of construction: 2024, Used machine Year of manufacture: 2024 Condition: as new, machine is unused Features and technical specifications: Cutting height: 2200 mm Cutting length: 5100 mm Cutting depth: 60 mm Hfjdpfjx H Dabjx Ag Djr Saw blade diameter: 250 mm Saw blade speed: 4800 rpm Scoring blade diameter: 80 mm Scoring blade speed: 8500 rpm Stops: 2 pcs Sound pressure level: 89.2 dB(A) Lower material support with metal rollers Automatic retractable slatted frame Vertical digital measurement display Horizontal digital measurement display Panel positioning on movable rollers without lifting Dimensions and weights: Height: approx. 3100 mm Length: approx. 6300 mm Width: approx. 1800 mm Weight: approx. 800 kg Dust extraction connection: Extraction port diameter: 1 x 100 mm Air requirement for extraction: min. 1000 m³/h Air velocity: min. 20 m/s Electrical specifications: Drive motor power: 3 kW Connection voltage: 400 V Line frequency: 50 Hz Scope of delivery: Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal Scoring blade Ø 80 x 2.8-3.6 mm Z20 Availability: short notice Stock location: Röllbach

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,637 h, load capacity: 1,400 kg, lifting height: 6,500 mm, free lift: 2,140 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, fork length: 1,150 mm, drive type: Elektro, Reach Truck Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tyres type: Vulkollan Front tyres condition: 80 - 100% Rear tyres type: Vulkollan Rear tyres condition: 80 - 100% Battery voltage: 48V Battery type: PzS Battery year: 2019 Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. - Side-shifting mast Hfjdsx H A U Repfx Ag Der Joystick,

Condition: used, mileage: 236,319 km, power: 130 kW (176.75 HP), first registration: 11/2011, fuel type: diesel, color: grey, gearing type: mechanical, number of seats: 3, Year of construction: 2011, Equipment: air conditioning, central locking, sliding door, The vehicle is sold as seen and liked, in its current condition. Test drives are possible. Ownership transfer fees to be added to the price. 22% VAT to be added to the price. Listed options may differ from those indicated. For information or appointments, contact via WhatsApp at ... or call ... Hedpsx H A U Defx Ag Defr

Condition: used, empty load weight: 9,916 kg, maximum load weight: 29,084 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,410 mm, loading space width: 2,460 mm, loading space height: 2,600 mm, loading space volume: 85 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2019, Equipment: ABS, Unladen weight: 9,916 kg, permissible gross weight: 39,000 kg, load securing with certificate, cargo space (L W H): 13,410 mm x 2,460 mm x 2,600 mm. Tire size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), cargo space volume: 85 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, pallet box, electronic braking system EBS, toolbox, connector plug 1x15 and 2x7 pin, EURO meat rail 60 mm, anti-spray, telematics system, Dynamic ramp protection (DRP), floor is in bad condition. You can find our complete vehicle range at . Interested in financing? With our Value Added Service we offer you tailored financing options, full service and telematics solutions. We are happy to advise you. Hfjdpfx Agjx H A Uwe Der

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 6,100 h, load capacity: 200 kg, empty load weight: 8,100 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated Boom Lift Hfodpfx Agsx H A Uqe Dsr Transmission: Hydrostatic Technical Condition: Good Front Tire Type: Solid Rubber Front Tire Condition: 80 - 100% Rear Tire Type: Solid Rubber Rear Tire Condition: 80 - 100% Description: The articulated platform Manitou 160 ATJ+180 ATJ is ideal for outdoor work on uneven or inclined surfaces. With a lifting capacity of 230 kg, an articulation height of 7.38 m, and a working height of 16 - 18 m, it ensures a wide working range. Featuring a diesel engine and four-wheel drive combined with three control modes, the 160 ATJ+180 ATJ stands out for its high performance and autonomy. The ergonomic control panel design provides a clear and user-friendly workspace. Thanks to hydraulic speed control, noise levels and fuel consumption are reduced.

Condition: used, empty load weight: 6,808 kg, maximum load weight: 31,192 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 11/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2019, gearing type: mechanical, Equipment: ABS, Poids à vide: 6808kg, Poids total admissible: 38000kg, Certificat DIN EN 12642 (code XL), Espace de charge (L L H): 13.620 mm x 2.480 mm x 2.700 mmLa taille du pneu: 385/65 R22.5, Volume espace de charge: 91 m³, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Système de freinage électronique EBS, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Mines : 11/2026 -, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télés serons heureux de vous conseiller personnellement. Hfedex H A Ukepfx Ag Djr

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,155 h, load capacity: 2,800 kg, lifting height: 8,500 mm, free lift: 2,467 mm, fuel type: electric, mast type: triplex, construction height: 3,487 mm, fork length: 1,300 mm, empty load weight: 6,500 kg, drive type: Elektro, Four-way side loader Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Description: In addition to this Bulmor model, we have approximately 200 additional heavy-duty forklifts, compact forklifts, conventional forklifts, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this EMU30.28/16.5-13/85 T BGTs N Z QK9X9. P.S.: Our master forklift workshop specializes in repair, service, refurbishment, and custom modifications for forklifts from 8 tons and up. We can also display your vehicle for consignment sale at our facility. Fork positioner, Hfsdpfx Agex H A Udj Djr Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,497 h, load capacity: 12,000 kg, lifting height: 5,540 mm, fuel type: diesel, mast type: simplex, construction height: 4,220 mm, empty load weight: 16,520 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,520 mm, Diesel forklift Load centre: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Super elastic Front tyres size: 12.00-20 Rear tyres type: Super elastic Rear tyres size: 12.00-20 Hfjdpex H A Tgofx Ag Dsr Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease purchase and attractive financing options are always available. We are also happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide detailed advice on this DCE120-6. P.S.: Our forklift master workshop specialises in repair, maintenance, refurbishment, and custom build solutions for forklifts from 8 tons and up. We are also happy to offer your vehicle on consignment sale. Clamp attachment Heater, full cabin, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,497 h, load capacity: 12,000 kg, lifting height: 5,540 mm, fuel type: diesel, mast type: simplex, construction height: 4,220 mm, fork carriage width: 2,720 mm, fork length: 2,500 mm, empty load weight: 16,520 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,520 mm, Diesel forklift Load center: 600 mm Fork width: 300 mm Fork thickness: 95 mm Mast type: Standard Condition: Operational and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Hedjx H A Taepfx Ag Dsfr Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-purchase and financing on favorable terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this DCE120-6. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons and up. We are also happy to consign your vehicle for sale through us. Sideshift, fork positioner, Fork positioner opening range: 640 / 2600 mm Heater, full cab, air conditioning,

Condition: ready for operation (used), Year of construction: 2018, operating hours: 131 h, This RETHINK Robotics Sawyer was manufactured in 2018. It features a Schunk gripper arm with an adapter plate and was used only for testing. With a maximum reach of 1260 mm and a handling weight of up to 4 kg, it has accumulated only 131 machine hours and 18 runtime hours. Contact us for more information about this machine. Application Types Hfedpfxsx H A S Ao Ag Dsr Robotics

Year of construction: 2005, condition: ready for operation (used), Control Unit Hfsdpfx Agox H A Svj Dsr Brand MITSUBISHI Main Drive Number of axis 3 This 3-axis MORI SEIKI NL 2000 SY/500 was manufactured in 2005. A horizontal turning machine featuring a BF interface and live tools, it also includes a tool setter on both spindles. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY/500 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 1988, condition: ready for operation (used), Control Unit Brand FANUC Hodpfx Agex H A Spj Defr Main Drive Number of axis 2 This NAKAMURA TMC-15 was manufactured in 1988. It's a horizontal turning machine featuring a hollow of 34 mm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA TMC-15 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2004, condition: ready for operation (used), Main Drive Spindle speed range 34000 Spindle motor power 15 kW Number of axis 5 Movement X-Axis Movement 9500 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1000 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 40 m/min Hodpfx Aox H A Siog Dofr Tools Type of tool holder HSK-63F Media Chip conveyor Yes Additional Equipment 2-zone pendulum operation Angle milling head for bottom-side machining (optional) Automatic length measurement Barcode scanner Label printer Cycle time monitoring Tool holders, collets, saw blades, tools included eluCad (office software package for production optimization) This 5-axis Elumatec SBZ 150 was manufactured in 2004. It features a CNC profile machining center with a maximum machining length of 9,220 mm and a spindle speed of 34,000 rpm. The machine includes a tool magazine with standard and special tools, and supports 6-sided machining with optional angle head. It's dismantled and ready for delivery. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 150 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 1730 mm Measurements depth 4000 mm Hfsdpfxjx H A Scj Ag Dsr Measurements height 1930 mm Machine weight 3500 kg Additional Equipment Accessories include a balancing device and diamond grinding wheel. Further technical specifications are available in the PDF. This Chevalier FSG 1640 AD III was manufactured in 2015. It features a grinding length of 1000 mm, height of 370 mm, and a magnetic plate size of 1000 x 400 mm. The grinding wheel measures 355 x 30 x 127 mm with a speed of 1750 rpm. Weighing approximately 3500 kg, its dimensions are 4000 x 1730 x 1930 mm. Contact us for more information about this machine. Application Types Grinding

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand Taiwan Model SYNTEC 60WE Main Drive Spindle speed range 6000–24000 Number of axis 3 Workpiece Workpiece X 2200 mm Workpiece Y 3700 mm Workpiece Z 200 mm Tools Type of tool holder ISO30 This 3-axis BLUE ELEPHANT ELECNC 2200x3700 was manufactured in 2021. It features a working area of 2200 mm by 3700 mm, a 9.6 kW HSD ATC spindle, and speeds ranging from 6000 to 24,000 RPM. Equipped with a Taiwan SYNTEC 60WE control system and Japanese YASKAWA 850W servomotors, consider the opportunity to buy this BLUE ELEPHANT ELECNC 2200x3700 CNC router. Contact us for more information about this machine. Hjdpsx H A R Sofx Ag Dofr Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2023, operating hours: 300 h, Main Drive Number of axis 5 Media Chip conveyor Yes Additional Equipment 36 tool change Includes tailstock function Hedpfx Agsx H A R Eo Defr This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Application Types Other Machine Tools

Year of construction: 2014, condition: ready for operation (used), Additional Equipment Bundleloader: 6.5 meters Steploader: 6.5 meters Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Hjdpfox H A Rxjx Ag Dofr Application Types Cutting