Istra Apartmani Doo

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Technical Specification Taper Size ISO 40 Blodpfjzylx Aex Acnel Through-spindle Coolant Yes

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Bodor P3 Fiber Laser Cutting Machine – Manufactured in 2019 – Used Bodor P3 3D? / Fiber Laser Cutting System – Manufactured in 2019 Technical data: * Model: Bodor P3 * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning, and generous working area. An interesting machine for sheet metal processing, metalworking, contract manufacturing, and industrial production. Used machine – inspection possible by appointment. Transport, disassembly, and loading can be arranged upon request. Upon request, transport and loading can be organized throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Bjdpfozylxvex Acnoll For further information or contact options, please visit our website.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Gas burner with a power output of 125-390 kW. Bledpfx Acszylxcjnel

Condition: used, operating hours: 11,655 h, functionality: fully functional, spindle bore: 65 mm, overall weight: 8,500 kg, spindle diameter: 65 mm, Well-maintained WT150 lathe, including an LNS Quick Load bar loader, fixed chucks, powered chucks, and Hainbuch collets. Blodszylw Espfx Acnol

Condition: used, machine/vehicle number: 008579, Work shaft length: 100 mm Motor power: 5.9 KW Tilting shaft: yes Bljdpfx Ajzylwrscnjl

Condition: used, machine/vehicle number: 008534, Max width workable: 2500 mm Bljdpfx Acszylwlsnol

Condition: used, machine/vehicle number: 008728, Max working length: 3000 mm Max working width: 1300 mm Heating System: electric Bsdszylwfjpfx Acnoll Pressure Exerted: 30 Kg/cm2 No of Pressing cylinders: 6

Condition: used, machine/vehicle number: 008727, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 8 No of Top Units: 4 Positioning of Units by NC: yes Bjdpfx Aozylv Uecnsll Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008729, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Bodpfjzylv Iox Acnsll Operating Units: 8 nr

Condition: used, machine/vehicle number: 008576, X axis working area: 3000 mm Y axis working area: 1230 mm Main Electrospindle power: 3.6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 20 Bledpjzylvzefx Acnel Total number of tool changer positions: 4

Condition: new, Thickness planer HOFMANN, model D 636 - new TERSA cutterhead with 4 knives 5.5 kW motor, 400 V, 50 Hz, electronic start and brake unit Modern control panel ergonomically positioned. Electric adjustment of the thickness table with push buttons for adjustment in rapid or slow mode, as well as adjustment to within 1/10 mm, integrated operating hour counter. Bsdpfezylvusx Acnsll Thickness table on four support spindles and with 4-point guidance. Rubber infeed roller and 2 rubber outfeed rollers. Segmented pressure bar, rotary knob for pre-tensioning the outfeed pressure bar Dust extraction port Ø 160 mm, to the left. Integrated tool storage compartment including options: - Motor power 7.5 kW instead of 5.5 kW - Stepless feed rate 4-22 m/min, instead of the 2 feed speeds - Positioning control for D 636 with 250 memory slots

Condition: good (used), mileage: 135,997 km, power: 221 kW (300.48 HP), first registration: 04/2021, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, loading space length: 8,720 mm, loading space width: 2,460 mm, loading space height: 2,300 mm, Year of construction: 2021, Equipment: AdBlue, central locking, cruise control, fog lights, = Additional Options and Accessories = - Heated mirrors - Cab = Notes = Daf CF 300 4x2 - Box truck - Low mileage - Full air suspension - Euro 6 - Automatic Model year: 04-2021 Mileage: 135,997 XLRAEM4100G340442 Blodpfx Acjzylvnsnol Box dimensions: 872 - 246 - 230 Low mileage Full air suspension Automatic gearbox Euro 6 Etc. = Further Information = Tire size: 315/70R22.5 Suspension: Air suspension Front axle: Max. axle load: 8000 kg; Steered Rear axle: Double tires; Max. axle load: 13000 kg GVWR: 20,500 kg Technical condition: good Optical condition: good

Condition: excellent (used), mileage: 810,492 km, power: 309 kW (420.12 HP), first registration: 06/1994, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,500 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 1994, Equipment: ABS, differential lock, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock Rear axle 2: Double wheels; Differential lock Bsdpfx Acezylvbonjll Technical condition: very good Visual appearance: very good

Condition: excellent (used), mileage: 401,969 km, power: 250 kW (339.91 HP), first registration: 02/1998, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,500 mm, total width: 2,500 mm, total height: 3,500 mm, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 1998, Equipment: ABS, differential lock, = Additional options and accessories = Bljdpjzylu Rsfx Acnel - 1 fuel tank - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock; Max. axle load: 13000 kg; Reduction: hub reduction Rear axle 2: Double wheels; Max. axle load: 13000 kg; Reduction: hub reduction Tipper: Left / Back Technical condition: very good Visual appearance: very good

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 260 mm, travel distance Z-axis: 1,000 mm, overall weight: 1,510 kg, number of axes: 2, Horizontal turning machine manufactured in 2016. This Weiler DA 260 X 1000 features a robust design with a weight of 1510 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Weiler DA 260 X 1000 machine we have for sale. Contact us for further details. Bsdpfx Aszylt Tjcnsll - Operating Voltage: 400 V- Control Voltage: AC 230 / DC 24 V- Connected Load: 11.5 kVA- Nominal Current: 15.5 A- Frequency: 50 Hz- Main Fuses: 32 A Technical Specification Counter Spindle No Driven Tools No

Condition: new, pneumatic linear drive or slide cylinder from Festo. Festo DGPL-18-750-PPV-A-KF-B Part number: 161977 Max. operating pressure: 8 bar The DGPL is a pneumatic cylinder without a piston rod and with integrated guidance. Compressed air drives the slide back and forth along the long guide rail. The 750 indicates a stroke of 750 mm, and the 18 indicates the size/piston diameter class. Typical applications include positioning, moving, or feeding workpieces in machines and automation systems. Festo data sheet for part number 161977 Type DGPL-18-750-PPV-A-KF-B. • DGPL = pneumatic linear drive without a piston rod with integrated guidance. In this version, it is a ball bearing guide. • 18 = piston diameter 18 mm. • 750 = in your specifically labeled unit, 750 mm stroke. According to Festo, the series can generally be configured with strokes from 10 to 1800 mm. • PPV = pneumatic end-of-stroke cushioning, adjustable on both sides. The slide is thus pneumatically braked shortly before its end positions; Festo specifies a damping length of 16 mm here. • A = version with position detection/proximity switches; in this series, sensors can detect the position or end positions of the piston. • KF = ball bearing guide (in contrast, for example, to GF, which is a slide guide). It ensures precise and robust guidance of the slide. Bedpfx Aozyltyjcnell • B = variant/series identifier of the DGPL version. Important data for your drive It is double-acting, meaning it is actively moved in both directions with compressed air. The permissible operating pressure is 2–8 bar. At 6 bar, Festo specifies a theoretical force of 153 N in both directions – approximately equivalent to the weight of 15.6 kg, although the actually usable force is lower. The pneumatic connections are M5. Permissible ambient temperature: -10 to +60 °C. The two compressed air connections drive the internal piston. The piston is mechanically connected to the slide, which runs on the outside, via the longitudinal slot. This provides 750 mm of linear movement without a 750 mm long piston rod, which would have to extend an additional distance out of the cylinder.

Condition: excellent (used), EA Elektro-Automatik 120 kW High-Voltage Rack System Manufacturer: EA Elektro-Automatik GmbH & Co. KG Rack: EA Rack 24 RU for 4x PSB/ELR 10000 4U Series Article No. Rack: 09114762 Power Modules: 4x PSB 11000-80 For sale is a complete bidirectional, high-performance rack system with four EA PSB 11000-80 units. The PSB units combine a programmable DC power supply and an electronic load with grid feedback into a single device. The system is particularly suitable for high-voltage test benches, battery and energy storage testing, e-mobility, automotive, power electronics, as well as research and development. Technical Data: 4x EA PSB 11000-80 Voltage range per module: 0–1000 V DC Current range per module: 0–80 A Power per module: 30 kW Installed rack total power: max. 120 kW Resistance range per module: 0.4–650 Ohm Output capacitance per module: 200 µF Efficiency source/sink: up to approx. 95.8 % Rack connection data according to nameplate: Rated voltage: 3x 400 V AC L1/L2/L3/PE Rated current: 3x 192 A Frequency: 45–65 Hz Operating mode: Continuous P-max: 120 kW Country of manufacture: Germany Equipment: 4x EA PSB 11000-80 EA 24 RU industrial rack Bidirectional source/sink operation Grid feedback Master-Slave/Share-Bus connection Common DC high-current copper busbars Color touch displays USB and Ethernet interfaces Bender LINETRAXX VMD460 Separate protection of the power modules Main switch Emergency stop Touch protection for the DC busbars Integrated power and protective conductor distribution The four power modules are interconnected within the rack. The common DC power distribution is provided via touch-protected copper busbars. Dimensions / Transport data: Dimensions L x W x H: approx. 1,050 x 610 x 1,400 mm Weight: approx. 400 kg Footprint: approx. 1,050 x 610 mm Pallet spaces: 1 Shipping: Freight forwarder The dimensions and weight are preliminary transport values based on a comparable rack. Condition: Bledpszyltgsfx Acnol Used Optical condition according to the images. The devices can be switched on, and the displays are active. A complete power and feedback test is not documented. Scope of delivery: 1x EA Elektro-Automatik 24 RU Rack 4x EA PSB 11000-80 Bender LINETRAXX VMD460 Integrated power, protection and monitoring technology Cabling and equipment according to the images Inspection possible by prior arrangement. Loading possible by arrangement. Availability: by arrangement. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2022, pressing force: 41 t, overall weight: 4,000 kg, This 6-axis Bystronic Xpert 40/1030 was manufactured in 2022. It features a working length of 1030 mm and a maximum press force of 400 kN, making it suitable for various bending applications. The machine has a maximum stroke of 200 mm and weighs 4000 kg. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 press brake we have for sale. Contact us for further details. Bodpfxjzyltaj Acnoll - Max. Stroke: 200 mm- Main Motor Power: 7.5 kW- Total Connected Load : 12 kW- Operating Voltage: 3 PH 400 V AC- Frequency: 50 Hz- Control Voltage: 24 V DC- Rated Current Fuse: 32 A- Max. Pneumatic Operating Pressure: 8 bar- Max. Hydraulic Operating Pressure: 320 bar Technical Specification Bending Length 1030 mm

Condition: good (used), Year of construction: 2005, operating hours: 5,000 h, For sale: well-maintained and fully functional aerial work platform. Working height: 16m. Trade-in and transport options available – please inquire. Bjdszylr Ajpfx Acnsll For more information, call or send a message.

Condition: used, PEM 2000 including various tools. Bodpfx Acozylpbsnoll The system can be inspected at any time.

Condition: new, Year of construction: 2026, Altendorf F 35 - Type 1 Panel Saw Standard Technical Equipment • 15” Touchscreen (19:6) • Double sliding table 3,200 mm • Electrically adjustable tilting and height adjustment 0 - 46° of the main saw blade, max. 154 mm • Main drive with 3 speeds (3/4/5000 rpm) • Diameter of main saw blade 300 - 450 mm • Large protective hood - Scoring saw preparation - Double sliding table 3200 mm - Table extension 840 mm Blodpfxszylnqj Acnol - Miter fence - Parallel fence 1000 mm Digit_X - 7.5 kW (10 hp) 3 speeds - Template holder, directly on the control panel - Front support roller

Condition: new, Festo pneumatic linear actuator Festo DGC-25-500-KF-YSRW-A – Part number/module number 532447 The specifications mean: • DGC = rodless pneumatic linear actuator • 25 = piston diameter 25 mm Bledpfozylndox Acnol • 500 = 500 mm stroke • KF = slide with recirculating ball bearing guide • YSRW = self-adjusting, progressive shock absorbers • A = for position detection/proximity switch This is not a cheap standard pneumatic cylinder. The exact model DGC-25-500-KF-YSRW-A is offered in the spare parts trade, for example, for €2,500 net. Festo itself continues to list 532447 / DGC-25 in its documentation database as a linear actuator. Festo DGC-25-500-KF-YSRW-A linear actuator, 500 mm stroke, recirculating ball bearing guide, part no. 532447.

Condition: good (used), mileage: 104,904 km, power: 118 kW (160.44 HP), first registration: 08/2020, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,000 mm, total width: 2,130 mm, total height: 3,250 mm, loading space length: 4,290 mm, loading space width: 2,110 mm, loading space height: 2,310 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Rear view camera - Fabric = Notes = Configuration: 4x2, twin tires, payload: 585 kg, unladen weight: 2915 kg, gross weight: 3500 kg, towing capacity, unbraked: 750 kg, towing capacity, center axle, braked: 3500 kg, type of cab: single cab, cruise control, air conditioning, number of airbags: 1, parking assistance: None, electric windows, electric mirrors, radio/cassette, GPS navigation, color: White, heated mirrors, rear view camera, type of lighting: halogen lamp, air conditioning, Bluetooth, engine power: 118 kW (158 hp), fuel: diesel, Euro: 6, drive technology: timing chain, type of gearbox: manual, gears: 6, power steering, ABS, ASR, starter battery, side paneling, roof rack: None, side doors: 1, rear closure: tail lift, central locking, number of seats: 3, seat arrangement: 1+2, seat cover: fabric, seat adjustment: manual, tail lift, tail lift design: tailgate, tail lift manufacturer: Sorenson, tail lift material: aluminum, tail lift size: 211x144, 3.0 ltr 160 hp EURO6 navi carplay camera side door, spare wheel, tire type: summer tires Blsdpfx Aozylmgjcnel = Further Information = General Information Number of doors: 1 License plate: V-87-HVS Axle Configuration Tire size: 195/75R16 Brakes: disc brakes Suspension: leaf spring suspension Axle 1: tire tread depth left: 6 mm; tire tread depth right: 6 mm Axle 2: twin tires; tire tread depth left inner: 5 mm; tire tread depth left outer: 4 mm; tire tread depth right inner: 5 mm; tire tread depth right outer: 4 mm Weights Unladen weight: 2,915 kg Payload: 585 kg GVW: 3,500 kg Functional Tail lift: Sorenson, tailgate Height of loading area: 90 cm Maintenance APK (Technical Inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: 417 € per month (delivery van, 72 months); ask for more information and conditions.

Condition: used, mileage: 208,851 km, first registration: 06/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,510 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, number of seats: 3, total length: 5,450 mm, total width: 1,900 mm, total height: 1,950 mm, loading space length: 2,700 mm, loading space width: 1,590 mm, loading space height: 1,340 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - None - Radio/Cassette - Partition = Notes = Configuration: 4x2, trailer coupling, cabin type: single cab, cruise control, air conditioning, number of airbags: 1, parking assistance: rear, electric windows, electric mirrors, partition, radio/cassette, GPS navigation, color: white, lighting type: halogen lamp, Bluetooth, fuel: diesel, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, side wall paneling, roof rack: none, side doors: 1, rear closure: double door, workshop equipment, central locking, number of seats: 3, seat arrangement: 1+2, seat cover: fabric, seat adjustment: manual, spare wheel, tire type: all-season tires = Further Information = Bledpfx Acozylmajnjl Number of doors: 1 Height of loading area: 56 cm Emission class: Euro 0 Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 1 License plate: V-382-GZ

Condition: good (used), mileage: 164,344 km, power: 103 kW (140.04 HP), first registration: 03/2019, fuel type: electric, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: electricity, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,210 mm, total width: 2,040 mm, total height: 2,410 mm, loading space length: 3,450 mm, loading space width: 1,830 mm, loading space height: 1,730 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, electric window regulation, navigation system, power mirror, trailer coupling, = Additional Options and Accessories = - Partition = Notes = Bsdpfx Acszyll Njnoll Configuration: 4x2, Unladen weight: 2063 kg, Gross vehicle weight: 3500 kg, Tow hitch, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Gray, Metallic, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Bluetooth, Turn signals, Engine power: 103 kW (138 hp), Fuel: Electric, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended, Sided paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat upholstery: Seat cover, Seat adjustment: Manual, L3H2 (L2H1) Air conditioning, Navigation, Euro 6, Camera, Tow hitch, 1st owner, Multi-function steering wheel, 140 hp!, Spare wheel, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Weights Unladen weight: 2,063 kg Payload: 1,437 kg GVW: 3,500 kg Functional Loading platform height: 57 cm Maintenance APK (Technical Inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €325 per month (van, 72 months); Ask for further information and conditions.