Romturingia SRL

Condition: used, mileage: 268,477 km, power: 84 kW (114.21 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,665 mm, overall weight: 3,500 kg, first registration: 10/2017, color: red, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, Emission standard: Euro 6 Engine/power: 2,143 cc, with turbocharger Axles: 4x2 Brakes: disc brakes Cab: tinted windows, electric windows, electric exterior mirrors, outside temperature display Refrigerated body: Cold Car, bunker doors/ice, 5 doors left, number of doors right: 5 doors Refrigeration unit: Copeland, eutectic plated cooling system, cooling down to -33 °C Other equipment: power steering, immobilizer ID: 118133 ATP 9/29 -33 °C front axle with increased load capacity Electronic Stability Program (ESP9i) reinforced anti-roll bars on rear axle subframe reinforced front axle stabilizer lockable glove compartment overhead storage above windscreen 6-speed manual ECO Gear transmission wheelbase 3,665 mm 3.5 ton vehicle driver's seatbelt warning system automatic headlight switch-off to parking lights adaptive brake light Euro 6 engine specification engine OM651 DE 22 LA 84 kW (114 hp) adjustable passenger seat driver's airbag smoker package Video1: Video2: Plate cooling is a cooling system that uses eutectic plates to maintain the required temperature level. The passive plates are connected to the power supply (380V) overnight. The solidification point of the eutectic solution is -33 °C. The eutectic plates are designed to maintain the temperature of already frozen goods. We always have a large selection of used refrigerated and freezer vehicles in stock. See more offers on our website. Non-binding offer, sale only to business customers, subject to error and prior sale. Advertisements and company logos on vehicles may have been digitally edited in the photos. Fgedpox E Ek Sefx Ab Tek

Condition: used, mileage: 264,817 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 2,840 kg, maximum load weight: 660 kg, first registration: 04/2016, emission class: euro5, color: red, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, electronic stability program (ESP), Performance/Engine: 2,143 cm³, with turbocharger Fedpfx Aex E Ek Esb Tegk Axles: 4x2 Brakes: Disc brakes Cab: Electric windows, outside temperature display Refrigerated body: Cold Car, bunker doors/ice, 5 doors on the left, number of doors on the right: 5 doors Refrigeration unit: Copeland, eutectic plate cooling, cooling down to -33 °C Other features: Power steering, immobilizer ID: 118140 ATP 2/28 -33 °C Front axle with increased load capacity Electronic Stability Program (ESP9i) Reinforced rear axle stabilizers under the frame Reinforced stabilizer on the front axle Lockable glove compartment Storage shelf above windscreen 6-speed manual transmission ECO Gear Wheelbase 3665 mm 3.5 ton vehicle Driver seat belt warning system Automatic driving light deactivation to parking lights Adaptive brake lights Emission class Euro 5B+ N1 Engine OM 651 DE 22 LA 70 kW (95 hp) at 3,800 rpm Adjustable passenger seat Driver airbag Smoker package Video 1: Video 2: Plate cooling is a refrigeration system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power grid (380V) overnight. The freezing point of the eutectic solution is -33 °C. The eutectic plates serve to maintain the temperature of already frozen products. We always have a large selection of used refrigerated and ice vehicles in stock. See more of our offer at Non-binding offer, sale to businesses only, errors and prior sale excepted Advertisements and company logos on vehicles may have been digitally modified in the photos

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,025 h, load capacity: 8,000 kg, lifting height: 4,855 mm, free lift: 1,530 mm, fuel type: diesel, mast type: triplex, construction height: 3,010 mm, fork carriage width: 2,200 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 900 mm Fork width: 200 mm Fork thickness: 70 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tires type: Superelastic Front tires size: Factory new Front tires condition: New Rear tires type: Superelastic Fgedpfxsx E Ekxs Ab Tjk Rear tires size: Factory new Rear tires condition: New Description: Overhauled, serviced, and tested according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, heater, road approval (STVZO), full cab, safety light, beacon, LED.

Condition: used, mileage: 596,500 km, power: 353 kW (479.95 HP), first registration: 05/2014, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2014, TITLE: MAN TGS 35.480 HOOKLIFT, FRONT LEAF SPRINGS, REAR AIR SUSPENSION, 8X4 2+2 REF: 25C53 YEAR: 05/2014 POWER: 480 HP DISPLACEMENT: 10,518 cc EMISSION STANDARD: Euro 6 KILOMETRES: 596,500 km TRANSMISSION: Automatic DIFFERENTIAL LOCK: Yes RETARDER/INTARDER: Yes AXLES: 4 (8x4 2+2) WHEELBASE: 4,300 mm TRAILER CAPABILITY: Yes ORIGIN: Imported CAB: Short and low Fgedpfx Absx E Ekro Tek NUMBER OF SEATS: 2 PAYLOAD: 18,500 kg - GROSS VEHICLE WEIGHT: 32,000 kg (full load / construction use) - GROSS COMBINATION WEIGHT (TRUCK + TRAILER): 44,000 kg (full load / construction use) BODY TYPE: Hooklift HOOKLIFT MODEL: MEILLER 32 TON TELESCOPIC ARM: Yes SWING ARM: No ROLLER: No ADR (Dangerous Goods Approval): No BODY COMPATIBILITY From: 4.50 m + 0.20 m To: 6.20 m + 0.20 m TOTAL LENGTH: 8.40 m with extended rear bar TOTAL LENGTH WITH CONTAINER: 8.70 m ACCESSORIES: - Air conditioning - Aluminium rims - Extendable rear bar, 0.50 m REFURBISHED: No INSPECTED: Yes TYRES: 100% new PRICE: €72,000.00 + VAT (Subject to errors and/or omissions) Displayed prices do not include VAT. Please contact our sales department for updated price and terms comparisons. For more information: Loris: 3484773001 URL: #thespecialistshooklifts SCARRABILI AURORA operates in the sales and purchase of industrial and commercial vehicles, mainly specialising in the waste management sector. Specialists in trucks, trailers, and hooklift equipment. Over 50 trucks and more than 150 containers (with and without crane) available for immediate delivery. Disclaimer Due to the large number of listings and details entered, Aurora invites customers to verify data accuracy with our sales staff.

Condition: used, Year of construction: 2025, color: orange, first registration: 06/2025, fuel type: gasoline, gearing type: mechanical, TITLE: USED ROLL-OFF CONTAINER FOR BULKY WASTE WITH HYDRAULIC LID, HINGES ON DRIVER'S SIDE AND OPENING ON PASSENGER SIDE, WITH NEWLY REDONE FLOOR. REAR OPENING WITH TWO SWING DOORS AND A SIDE DROP-DOWN SIDEBOARD H. 0.50 MT ON THE PASSENGER SIDE. REF: 25-U-91 TYPE: bulky waste NEW: no LID: yes OPENING: rear with two swing doors DIMENSIONS TOTAL EXTERNAL LENGTH: 5.40 m + 0.20 m beams BODY EXTERNAL WIDTH: 2.50 m Fgjdpfx Absx E Ekls Tek FRONT SIDEBOARD INTERNAL / EXTERNAL: 1.60 m / 2.00 m REAR SIDEBOARD INTERNAL / EXTERNAL: 1.60 m / 2.00 m SIDE SIDEBOARD INTERNAL / EXTERNAL: 1.60 m / 2.00 m CAPACITY: 20 m³ WEIGHT: 2660 kg FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOUR: orange Subject to errors and/or omissions The prices shown do not include VAT. Please contact our sales department for updated price quotes and terms. For further information: Loris: 3484773001 URL: #thespecialistsofrolloff SCARRABILI AURORA operates in the sales and purchase of industrial and commercial vehicles, mainly specializing in the waste management sector. Specialists in trucks, trailers, and roll-off equipment. With a fleet ready for immediate delivery of over 50 trucks and more than 150 bins, containers with and without roll-off cranes. E.&O.E. Given the number of listings and information included, Aurora advises to verify the accuracy of data with our sales staff.

Condition: used, mileage: 556,600 km, power: 250 kW (339.91 HP), first registration: 01/2008, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2008, TITLE: VOLVO FM 9 SKIP LOADER WITH FRONT LEAF SPRINGS AND REAR AIR SUSPENSION 6X2 REF: 22C19 YEAR: 2008 HORSEPOWER: 340 ENGINE CAPACITY: 9365 EURO: 5 KM: 556,600 TRANSMISSION: manual DIFFERENTIAL LOCK: yes RETARDER/INTARDER: no Fgjdpfxex E Ekfs Ab Tsk AXLES: 3 6x2 WHEELBASE: 3,700 TRAILER COUPLING: no ORIGIN: Italy CAB: short and low SEATS: 2 PAYLOAD: 14,900 kg - TRUCK: 26,000 kg fully loaded - TRUCK + TRAILER: BODY TYPE: hooklift HOOKLIFT MODEL: MEC 26/6 EXTENDING: yes SIDE-SHIFT: no ROLLER: vertical ADR: no BODYWORK SUITABILITY FROM: 4.20 m + 0.20 m TO: 6.00 m + 0.20 m TOTAL LENGTH: 7.82 m TOTAL LENGTH WITH CONTAINER: 8.22 m ACCESSORIES: - 3rd intelligent, liftable steering axle - piping for crane REFURBISHED: yes INSPECTED: 13/11/2023 TYRES: 40% PRICE: €48,500.00 + VAT Prices shown are exclusive of VAT. Please contact our sales department for up-to-date pricing and terms. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste sector. Specialized in trucks, trailers, and hooklift equipment. Stock of over 50 trucks ready for delivery and more than 150 containers, with and without hooklift cranes. Errors and omissions excepted. Given the number of listings and details entered, Aurora recommends verifying the accuracy of the data with our sales team.

Condition: used, Year of construction: 2025, color: blue, empty load weight: 3 kg, first registration: 12/2025, fuel type: gasoline, gearing type: mechanical, TITLE: USED BAULETTO SKIP CONTAINER WITH 3 SIDE DOORS PER SIDE AND REAR OPENING WITH TWO SWING DOORS. REF: 25-U-160 Fodpfx Abex E Ei Ue Tjgk TYPE: bulky waste NEW: no LID: yes OPENING: rear, with two swing doors DIMENSIONS: OVERALL OUTSIDE LENGTH: 5.50 m OUTSIDE BODY WIDTH: 2.50 m FRONT SIDE HEIGHT: 1.65 m REAR SIDE HEIGHT: 1.65 m SIDE PANEL HEIGHT: 1.65 m CAPACITY: 18 m³ WEIGHT: 1,980 kg FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOUR: blue Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales representative for up-to-date pricing and conditions. For more information: Loris: 3484773001 URL: #theskipspecialists SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, with a main focus on the waste sector. Specialised in trucks, trailers, and demountable equipment. Immediate delivery available: over 50 trucks and more than 150 bodies, containers with and without removable cranes in stock. E.&O.E. Given the large number of listings and technical details provided, Aurora recommends verifying the accuracy of the information with our sales staff.

Year of construction: 2004, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 600 mm Fsdjx E Einepfx Ab Tsgk MAX TURNING LENGTH: 670 mm MAX TURNING DIAMETER: 490 mm BAR CAPACITY: 80 mm SPINDLE: 3500 rpm; 22 kW; 539 Nm; ASA 8" ; 315 mm X-AXIS TRAVEL: 255 mm Z-AXIS TRAVEL: 670 mm RAPID FEEDS X-Z: 20 - 24 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 31iT WEIGHT: 6000 Kg OVERALL DIMENSIONS: 445 x 190 x 210 mm ACCESSORIES: SWARF CONVEYOR

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 30 mm Fedpfex E Eihex Ab Tjgk MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-3000 CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: used, mileage: 439,510 km, power: 330 kW (448.67 HP), first registration: 10/2020, fuel type: diesel, maximum load weight: 10,032 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: retarder, color: green, driver cabin: other, gearing type: other, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: air conditioning, cruise control, navigation system, onboard computer, parking heater, This offer is non-binding. Subject to prior sale and errors excepted. If a foreign currency is indicated, it is based on the current daily exchange rate. The valid currency is that of the vehicle's location. Engine: OM471, inline 6, 12.8 L, 330 kW (449 HP), 2200 Nm, High Performance Engine Brake, Predictive Powertrain Control, front axle air suspension, rear axle air suspension, Lowliner, axle load measurement system, electronic parking brake, secondary water retarder, wheelbase 3700 mm, tank 660 L + 75 L AdBlue (aluminum), with entry steps, electric sliding/lifting glass sunroof, L-cab, cab width 2.50 m, BigSpace, adjustable roof spoiler with end flaps, exterior transparent sun visor, compressed air horns (cab roof), LED daytime running lights, leather steering wheel, upper comfort bed (wide, level-adjustable), lower comfort bed, one-piece electric sunblind for the front windscreen, LED ambient lighting (driving & living), table on passenger side, interactive multimedia cockpit, refrigerator (drawer type, under bed), electric stationary air conditioning, automatic climate control, auxiliary hot water heater, comfort driver's air-suspended seat, rain sensor, bi-xenon headlights, LED rear lights, headlight cleaning system, lane keeping assist, distance control assist, attention assist, traffic sign assist, driver's airbag, cruise control, comfort telephony with wireless charging, navigation system, Volumer Fgodpjx E Eibsfx Ab Tjk

Condition: excellent (used), The DNDA type pointer–chamfering machine is designed for forming conical points or chamfering the ends of shafts, rods, and stakes. Feeding and rotation of the workpiece are performed manually. Min. length of workpieces: 700 mm Disc rotational speed: 1060 rpm Number of cutting knives: 6 pcs Motor: 4 kW Extractor nozzle diameter: Ø 160 mm Required air flow for chip extraction: 850 m3/h Table height above floor: 730 mm Overall dimensions: Length: 960 mm, Width: 880 mm, Height: 1300 mm Weight: 280 kg Fedpfx Aox E Eh Rjb Togk

Condition: used, mileage: 499,287 km, first registration: 12/1995, fuel type: diesel, color: orange, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1995, = Additional options and equipment = - Power Take-Off (PTO) = Additional information = Technical information Number of cylinders: 6 Fgodpfx Aex E Egyjb Tok Axle configuration Suspension: Leaf suspension Front axle: Steered Rear axle 1: Twin tires; Reduction: External planetary axles Rear axle 2: Twin tires; Reduction: External planetary axles Dimensions and weights Gross vehicle weight: 26,000 kg Dimensions (L x W x H): 790 x 250 x 324 cm Functional Bodywork brand: AJK Pump: Yes Financial information Price: On request Further information Contact Thierry Leemans for more details.

Condition: ready for operation (used), Year of construction: 2016, General Data Fjdpfox E Egmjx Ab Tsgk Machine weight 11000 kg Measurements height 3100 mm Control Unit Brand FANUC Model Series 0i-TD Dimensions Machine Length 2750 mm Main Drive Spindle motor power 30 kW Number of axis 2 This DEFUM KNA-110 S0 vertical turning machine was manufactured in 2016. It features a maximum swing with upper support of 1350 mm and a table diameter of 1100 mm, supporting workpieces up to 4000 kg. The table speed range is 6.3–200 rpm with 16 speed steps. Main motor power is 30 kW. If you are looking to get high quality turning capabilities consider the DEFUM KNA-110 S0 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Fgjdpfox E Eggsx Ab Tok Dimensions Machine Length 6060 mm This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, Control Unit Brand FANUC Model iSeries Table Table load 400 kg Main Drive Number of axis 4 Spindle Speed 10000 RPM Tool taper BT 40 Movement X-Axis Movement 800 mm Fodpfxex E Egao Ab Tjgk Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 4-axis DOOSAN DNM 4500 was manufactured in 2016. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. Application Types Milling

Year of construction: 2000, condition: ready for operation (used), This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine. Application Types Other Sheet Metal Machinery Fgsdpex E Ef Njfx Ab Tsk

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 6500 kg Measurements height 2500 mm Dimensions Machine Length 2800 mm Main Drive Number of axis 3 Spindle Speed 8000 RPM Spindle motor power 7.5 kW Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2002. It features a spindle speed of 8000 rpm, a 24-pocket tool magazine, and a robust 6500 kg construction for stability. The compact design allows for efficient use of workshop space, while the high load capacity of 800 kg supports a variety of applications. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 103 V machine we have for sale. Contact us for more information. Application Types Fsdpfox E Ef Aox Ab Tegk Milling

Year of construction: 2024, condition: ready for operation (used), Main Drive Number of axis 4 Spindle motor power 9 kW Movement X-Axis Movement 2100 mm Z-Axis Movement 400 mm Y-Axis Movement 3050 mm Fgsdpfox E Efvjx Ab Tok This 4-axis QUICK CNC UA 481 was manufactured in 2024. It features a 2100 x 3050 x 400 mm working area, a 9 KW HSD/HSK F 63 spindle, and a double layer vacuum table with 6 zones. Equipped with a Yaskawa servo motor and two Becker pumps at 250 m3/h each, it's ideal for advanced woodworking. Consider the opportunity to buy this QUICK CNC UA 481 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types CNC Wood Machining

Year of construction: 2023, condition: ready for operation (used), General Data Machine weight 175 kg Fgsdpfx Aex E Efpjb Tsk This Zoller Smile 420 was manufactured in 2023. It features image processing technology with a Z-axis length of 400 mm and an X-axis radius of 200 mm. The machine supports a maximum diameter of Ø400 mm and requires a compressed air pressure of 4–6 bar. Ideal for precise optical measurements, consider the opportunity to buy this Zoller Smile 420 optical measurement machine. Contact us for more information about this machine. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2014, This Yaskawa DX100 was manufactured in 2014. It's a welding robot like new, with minimal operating hours. Features include a rotary table for dual workpiece processing (1000 × 1500 mm) and a wire feeder for overlay welding. It's equipped with a high-performance TIG welding system. Technical support is available via ROBOTECO S.p.A. Contact us for more information about this machine. Application Types Fgodpfx Abjx E Efij Tok Welding

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements height 2500 mm Dimensions Machine Length 2300 mm Control Unit Brand CYBELEC Model DNC 60 Fodsx E Efcjpfx Ab Tjgk Main Drive Number of axis 3 Bending length 1330 mm Pressing force 245 Kn This 3-axis ADIRA QHD-2512 PLC press brake was manufactured in 2009. It features a Cybelec DNC 60 control unit, a pressing force of 245 kN, and a bending length of 1330 mm. The distance between columns is 1250 mm, and it operates at a working speed of 8 mm/s. If you are looking to get high-quality bending capabilities, consider the ADIRA QHD-2512 PLC machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 5500 kg Measurements height 2634 mm Control Unit Brand FANUC Model 18-M Main Drive Spindle Speed 10000 RPM Spindle motor power 9 kW Tool taper BT 40 Number of axis 4 Movement X-Axis Movement 800 mm Z-Axis Movement 505 mm Y-Axis Movement 500 mm Tools Max weight 6 kg Dimensions Machine Length 2530 mm Fgedpox E Ed Sefx Ab Tek Table Table load 500 kg This 4-axis ANAYAK 8-HS was manufactured in 2001. It features a Fanuc 18-M CNC, with travels of 800 x 500 x 505 mm, and a table that can support up to 500 kg. The spindle operates at 10,000 rpm with a BT 40 taper and has a power of 9 kW. It includes a 24-position tool changer and additional equipment like a 4th axis, spindle cooler, and chip conveyor. Consider the opportunity to buy this ANAYAK 8-HS vertical machining center. Contact us for more information. Application Types Milling

Year of construction: 2010, operating hours: 27,928 h, condition: ready for operation (used), This 3-axis TRUMPF TruLaser 5030 + LiftMaster + Stopa was manufactured in 2010. It features a 7000-watt CO2 resonator and handles a maximum sheet size of 3000x1500mm. The system includes a LiftMaster and a Stopa storage system with 85 pallets and a 255-ton capacity. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 machine we have for sale. Contact us for more information. Fgodpfxox E Ed Es Ab Tok Application Types Cutting

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 6800 kg Measurements height 2808 mm Dimensions Fgodpsx E Edxofx Ab Tok Machine Length 2929 mm Table Table load 1200 kg Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 18.5 kW Movement X-Axis Movement 1050 mm Z-Axis Movement 510 mm Y-Axis Movement 530 mm Tools Max weight 8 kg This 3-axis Mazak VCS 530C vertical machining centre was manufactured in 2014. It features a table size of 1300x550 mm, X/Y/Z travels of 1050/530/510 mm, and a maximum spindle speed of 12000 min⁻¹. The machine supports a table load up to 1200 kg and includes a 30-tool magazine with a rapid tool change time of 2.8 seconds. Consider the opportunity to buy this Mazak VCS 530C vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 6350 kg Control Unit Fgedex E Edropfx Ab Tjk Brand HAAS Main Drive Spindle speed range 12000 rpm Number of axis 4 Movement X-Axis Movement 1270 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Tools Type of tool holder BT 40 This 4-axis HAAS VF-4SS was manufactured in 2012. It features a BT 40 tool holder and a maximum spindle speed of 12,000 rpm, suitable for a variety of machining tasks. Consider the opportunity to buy this HAAS VF-4SS vertical machining centre. Contact us for more information. Application Types Milling