Mcf Trade Srl

Condition: used, -Etikettenrolle: 250mm Hedpfxjx H Tmqe Ag Dsfr -Höhe Spendekante von Boden: 50-100cm verstellbar. -Fahrbar auf rollen

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling Hsdpfxjx H Tils Ag Dsfr After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, Year of construction: 2008, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Hodpsx H Thzsfx Ag Dsfr Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process.

Condition: used, Year of construction: 2008, operating hours: 34,590 h, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Hedpfx Agex H Thuj Dsfr Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart.

Condition: used, Year of construction: 2009, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems Hfsdpfx Agox H Tgde Dor The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts.

Condition: used, Year of construction: 2004, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Hjdsx H Tf Topfx Ag Defr Current bottle format: 0.5L No. of cavities: 8 Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts.

Condition: used, Year of construction: 2012, operating hours: 43,373 h, Used Cap Applicator – Overview Hfedpfx Ajx H Tc Eeg Dsr This used cap applicator, manufactured by Tetrapak, is designed for high-speed application of plastic screw caps onto carton packages in industrial packaging and beverage production environments. The Cap 30 Speed model supports efficient cap application at up to 12,000 caps per hour, making it a reliable choice for a second hand or used bottling line where consistent throughput and precise cap placement are critical. It is well suited for integration into modern packaging machinery setups and can operate as part of a larger used bottling line for beverage production. Engineered for accuracy and repeatability, the machine is compatible with Helicap 23 closures, commonly used in carton packaging applications. Its robust construction and proven Tetrapak engineering ensure stable performance for producers seeking to optimize industrial packaging efficiency without compromising quality. With testing available, this unit offers confidence in readiness and operational reliability. Technical Specifications & Performance Data Manufacturer: Tetrapak Model: Cap 30 Speed Alternate reference: Cap30 Speed Year: 2012 Production speed: up to 12,000 caps/hour Cap system: Helicap 23 (plastic screw cap) Cap size: 23mm Container type: Carton packages Advanced Automation & Control Systems The Cap 30 Speed is built for dependable, automated operation within demanding production schedules. Typical features include an intuitive operator interface for quick setup and monitoring, integrated safety logic, and precise actuation for consistent cap positioning. Designed for high uptime, the machine supports streamlined changeovers and consistent application pressure, helping maintain output quality and reduce stoppages across extended shifts in beverage production. Production Line Integration Capabilities This cap applicator integrates efficiently into upstream and downstream equipment within a used bottling line or complete packaging system. It can be configured for inline operation with conveyors and synchronization signals for smooth product flow. The Helicap 23 compatibility supports widely used carton formats, making it a strong fit for industrial packaging lines that require dependable throughputs and minimal bottlenecks. Its footprint and connection points are suitable for common layout configurations, and it can operate as a standalone station or as part of a synchronized multi-machine line. Machine Condition & Maintenance History The applicator is available with the possibility to test the machine, indicating readiness for operation and providing assurance of functional performance. As a second hand solution, it represents a cost-effective option for facilities seeking dependable capping capability with verifiable operation prior to installation. Operational Performance & Versatility At 12,000 caps per hour, the machine delivers consistent performance for high-volume carton capping in beverage production.

Condition: used, Year of construction: 2011, Used Frozen Orange Processing Line The Frozen Orange Processing Line by Navatta Group is an industrial processing solution engineered for handling frozen citrus products with high reliability and safety. Built in 2011 and configured under model QE11056, this second hand line is suitable for integration within beverage production and industrial packaging environments where pre-processing of fruit inputs is required. Designed for continuous-duty operation, it provides robust automation, comprehensive operator protections, and compliance with stringent European safety standards. Its electrical and control architecture supports stable performance and straightforward integration into a complete used bottling line or broader food and beverage processing workflow. Manufactured by Navatta Group engineering, the line is tailored for frozen orange processing applications, with the flexibility to interface with downstream equipment such as filling, labeling, capping, and packaging machines. It is an optimal choice for producers seeking dependable performance in industrial packaging contexts, enabling efficient preparation of fruit-based inputs for further transformation within beverage production lines. Technical Specifications & Performance Data Manufacturer: Navatta Group Model: QE11056 Year: 2011 Primary voltage: 400 V Auxiliary voltage: 24 V Frequency: 50 Hz Installed power (absorbed): 47 kW Maximum current: 93.1 A Short-circuit current rating (Icc): 40 kA Line type: Frozen orange processing line Advanced Automation & Control Systems The line features a dedicated electrical panel with clearly identified electrical characteristics and operator controls. Automation is supported by integrated control and safety logic designed to minimize risk and streamline operation. The system provides: Operator control panel with descriptive indicators and alarms Structured safety devices and interlocks for guarded operation 24 V auxiliary control circuits for reliable low-voltage signaling Industrial-grade electrical build complying with EN 60204-1 Designed for quick parameter adjustments during format or process changes Production Line Integration Capabilities This line is engineered to be positioned inline with upstream and downstream equipment. It can operate as part of a broader used bottling line or food processing cell, supporting material handling and transfer to filling, labeling, capping, and packaging stations. Integration features include: Inline positioning with conveyor and utility connection readiness Compatibility with industrial packaging workflows Process parameters adjustable for product handling requirements Hfedpfxex H Tcxj Ag Djr Suitable as a pre-processing stage in beverage production environments Machine Condition & Maintenance History The equipment is supported by a comprehensive user and maintenance manual, including electrical schematics and functional specifications.

Condition: used, Year of construction: 2013, Technical Specifications & Performance Data The Sirio 4-T is a professional capsuling and capping solution engineered for wine and premium beverage bottling, manufactured by Ennolmeccanica Vallebelbo Sas. Designed to handle glass wine bottles with precision, it delivers consistent closure application and smooth bottle handling across multiple shapes and formats commonly used in beverage production. Manufacturer: Ennolmeccanica Vallebelbo Sas Model: Sirio 4-T Machine type: Capsuling and capping system for glass bottles No. of heads: 4 Closure format: Stelvin 30×60 aluminum screw caps Hjdpfx Ajx H Taqog Dsfr Bottle compatibility: Bordeaux, conical, and two special/custom formats. The machine can handle bottles from 180 mm to 360 mm in total height. Container types: Glass bottles Application: Inline or standalone integration within an industrial packaging line Advanced Automation & Control Systems The Sirio 4-T is designed for reliable, repeatable application of screw caps and compatibility with capsule application processes in modern bottling plants. Its turret-based architecture supports precise bottle handling and consistent torque application for Stelvin 30×60 closures. The machine is built to interface with standard control systems used in packaging machinery, ensuring stable operation and straightforward diagnostics through common PLC/HMI environments adopted in beverage production. Production Line Integration Capabilities This machine integrates seamlessly into a used bottling line or a new installation alike, supporting upstream fillers and downstream labeling or inspection equipment. It fits conventional conveyor layouts and can be configured for inline or standalone operation. Format changes for Bordeaux, conical, and special bottle designs can be accommodated with appropriate change parts, enabling flexible operation across multiple SKUs in industrial packaging environments. Machine Condition & Maintenance History The Sirio 4-T is in new condition, suitable for immediate deployment. Its construction and design lend themselves to low routine maintenance and reliable uptime when integrated into beverage production workflows. Preventive maintenance routines are straightforward and align with standard best practices in packaging machinery. Operational Performance & Versatility Optimized for glass bottle handling, the Sirio 4-T delivers stable closure application for wine-style bottles using Stelvin 30×60 aluminum screw caps. Its 4-head configuration supports balanced throughput while preserving closure integrity and bottle aesthetics. The machine’s versatility across Bordeaux, conical, and custom bottle designs makes it a strong choice for wineries and premium beverage producers seeking consistent performance with minimal operator intervention. Installation Requirements & Site Preparation The system is designed for integration into standard beverage packaging halls.

Condition: used, Year of construction: 2004, operating hours: 4,047 h, Technical Specifications & Performance Data The Tetra Pak TBA 19 100V is a proven aseptic filling machine engineered for high-reliability carton packaging in beverage production. This second-hand unit is tailored for UHT applications and supplied with a new 0.125 L Slim format kit, ensuring efficient, hygienic, and cost-effective industrial packaging. Ideal for producers seeking a used bottling line component with dependable performance, the TBA 19 integrates seamlessly into modern processing environments. Manufacturer: Tetra Pak Model/Version: TBA 19 100V Hfedpfsx H S Sfex Ag Dsr Filling type: Aseptic (UHT) Year of manufacture: 2000 Working hours: 4,047 Production speed: up to 7,000 packs/hour Primary format: 0.125 L Slim (new 2026 format kit included) Container type: Carton (Tetra Brik Aseptic) Application focus: UHT milk and juice Advanced Automation & Control Systems Designed for consistent performance in aseptic conditions, the TBA 19 100V benefits from Tetra Pak engineering for streamlined operation and reduced downtime. The machine supports integrated line controls and is compatible with standard production monitoring and printer/coder interfaces used across beverage packaging machinery. Quick-format change for the 0.125 L Slim package minimizes line interruptions and enables efficient production planning. Production Line Integration Capabilities The filler can operate as a standalone station or as part of a complete used bottling line. It is compatible with essential downstream equipment, enabling full industrial packaging workflows for beverage production. Optional modules can be added to expand functionality and improve throughput. Optional equipment: TSA21 straw applicator Material handling: Easy rider/conveyor system and conveyor line End-of-line: Packer system Controls and coding: Line controller with Domino printer Utilities: Paper trolley and ancillary accessories These options support efficient integration with existing packaging machinery and enhance overall line performance. Machine Condition & Maintenance History The machine is offered after maintenance, with the possibility of immediate delivery in as-is condition or delivery post-maintenance within a standard lead time. With only 4,000 operating hours, this second-hand aseptic filler represents a low-wear asset for producers looking to upgrade capacity or standardize on Tetra Pak carton formats. Operational manuals and know-how transfer are available to facilitate rapid commissioning and onboarding. Operational Performance & Versatility Optimized for UHT applications, the TBA 19 100V provides stable aseptic filling for milk and juice products in 0.125 L Slim cartons. Its hygienic design supports consistent product quality and shelf stability expected in long-life beverage production.

Condition: used, Year of construction: 2006, Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph Introduction to the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph offers a compact and high-performance solution for bottling still wine. Bertolaso, a renowned manufacturer, built this specific model, the Miniblock Olimpia 12/12/1, in 2012. Consequently, the machine combines rinsing, filling, and capping functions into a single, efficient structure. Operating performance of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph processes 2500 bottles per hour and operates in a clockwise direction. Moreover, the system includes complete safety protections that comply with current industrial machinery standards. It also comes with technical manuals and full revision documentation. Therefore, operators can manage installation and maintenance activities efficiently. Hfjdpfjx H Rn Eox Ag Dor Operational status and production applications The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph currently runs in production and bottles still wine. Specifically, its rinsing unit uses 12 grippers and performs a single treatment cycle to clean containers internally before filling. Consequently, it ensures high hygiene standards. In addition, the modular construction allows easy adaptation to different production requirements. Technical specifications of the filler The filling section of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph features 12 valves. Particularly, the system fills containers using a light vacuum method, which preserves the wine’s organoleptic properties. Furthermore, the use of fixed valves ensures reliable performance and simplifies maintenance procedures. Thus, the machine minimizes downtime during cleaning or part replacement. Capping system of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The capping unit of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph applies flush corks using a single capping head. As a result, it maintains consistent sealing quality across all bottles. It handles corks with a 26-millimeter diameter, maintaining compatibility with common industry standards. Similarly, the PLC-based control system by Siemens ensures high automation precision. In fact, it guarantees seamless operation even during extended production shifts. Therefore, companies can integrate the monoblock into automated bottling lines without requiring major modifications. Dimensions and configuration of the Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph The Used filling monoblock Bertolaso Miniblock 12/12/1 2500 bph has only 4000 operating hours and remains in excellent working condition. Hence, it represents a very reliable choice for businesses requiring immediate production integration. It measures 4000 millimeters in length, 2450 millimeters in height, and 1850 millimeters in width, fitting easily into compact production areas.

Condition: used,

Condition: used, capacity 1200 bottles Hfsdpfox Hta Rex Ag Djr

Condition: used, generalüberholt, Druckfüller Sparkling ,So2 Medium mit Vorevakuierung Füllstellen: 16 Hfjdpfex Hta Dox Ag Djr Laufrichtung: rechts-links (gegen UZS)

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 151515, input voltage: 400 V, GERNEP Rollfeed 8-480 labeller. Up to 8,000 bottles/hour. Year of manufacture: 2015. Supported formats: 0.5L, 1L, 1.5L, 2L. The equipment was purchased from the bankruptcy of a Belgian company specializing in production lines. The machine appears to be as new—everything indicates it was set up for production, but it never left the plant that prepared it for operation. Hfsdjx Hph Depfx Ag Dsr Label counters show just 9,000 units. The machine has no damages, the computer switches on and displays all system messages. In the attached photos, the system date is not set, which is why the current messages show a 2009 date. However, the machine was manufactured in 2015. Additionally, included is a full pallet of spare parts and plates for labelling 1L bottles. This is truly an excellent offer—the machine is practically new, the price is very attractive and non-negotiable! The video shows an identical machine in operation.

Condition: used, operating hours: 34,000 h, Technical Specifications & Performance Data This used complete bottling line is configured for aseptic carton packaging in the Tetra Pak Prisma 0.33L format. Engineered around proven Tetra Pak components, it provides a compact, reliable solution for high-quality industrial packaging and beverage production. The line configuration integrates filling, capping, and packing functions with smooth container handling for stable operation and consistent output. Production speed: 7500 pieces/hour Format: 0.33L Prisma (square) Container type: Carton (Tetra Pak Prisma) Line configuration: TBA19 (Filler) + TCA45 (Capper) + TCBP70 (Packer) Filler model: TBA19 Capper model: TCA45 Packer model: TCBP70 Operating mode: Aseptic packaging line for shelf-stable beverages Manufacturer: Tetra Pak Advanced Automation & Control Systems The line benefits from Tetra Pak engineering with integrated automation that supports stable aseptic operation. Centralized controls coordinate filler, capper, and packer modules for synchronized throughput, precise timing, and reduced downtimes. Recipe-based settings enable consistent setup for the Prisma 0.33L format, and operator-friendly HMI interfaces facilitate monitoring, diagnostics, and quick adjustments during production. Production Line Integration Capabilities Designed for seamless integration into a complete production environment, this used bottling line supports upstream and downstream connections such as infeed handling, carton supply, and end-of-line palletizing. The Prisma 0.33L format is standard in the configuration, ensuring reliable format handling and efficient changeover within the same format family. The conveyor logic and module interfaces help maintain continuous flow and balanced line performance in second hand industrial packaging applications. Machine Condition & Maintenance History This second hand line is offered in working condition and ready for operation, with original model identification on the equipment. Tetra Pak’s serviceable design supports routine maintenance, with wear components and aseptic-critical parts accessible for inspection and replacement following standard preventive maintenance practices. The line is suitable for facilities aiming to expand or standardize aseptic beverage production without significant commissioning delays. Hfsdpex E U Aksfx Ag Der Operational Performance & Versatility Optimized for aseptic processing, the system provides controlled handling from filling to cap application and packing. The TBA19 ensures accurate fill under aseptic conditions; the TCA45 applies compatible closures for Prisma cartons; and the TCBP70 organizes secondary packaging for efficient logistics. The result is a robust solution for industrial packaging where product protection, shelf life, and consistent presentation are essential. Installation Requirements & Site Preparation The line is intended for installation in a hygienic production area with controlled environmental conditions suitable for aseptic operations.

Condition: used, Year of construction: 2011, Technical Specifications & Performance Data This 20,000 L aseptic tank is engineered for hygienic storage and buffering in beverage production and industrial packaging environments. It combines a newly manufactured pressure vessel with proven aseptic system heritage, making it a strong solution for second hand installations and used bottling line upgrades. Nominal capacity: 20000 L Design pressure: 0.09 to −0.1 MPa (positive pressure and full vacuum range) Pressure test pressure: 0.12 MPa Design temperature: 148 °C Main body material: S31603 stainless steel (food-grade corrosion resistance) Manufacturing year (tank body): 2025 Tank year: 2011 from Tetra Pak Engineering standard: GB/T 150-2024 (pressure vessels) System heritage: Tetra Pak aseptic module lineage for beverage applications Advanced Automation & Control Systems The tank is prepared for seamless integration into automated process control architectures typical of modern beverage production lines. Instrumentation ports and valve interfaces support level, pressure, and temperature monitoring, as well as aseptic steam-in-place (SIP) and clean-in-place (CIP) routines. The system documentation set includes activation and sequence diagrams and a communication description for S7-based control, supporting PLC/HMI connectivity, interlocks, and recipe-driven operation. PLC-ready signals for level, pressure/vacuum, and temperature Interfaces for aseptic valve clusters and CIP/SIP circuits Safety interlocks for pressure and vacuum protection Documentation for commissioning and parameterization Hedox E Tbfjpfx Ag Dsfr Production Line Integration Capabilities Designed to function as an aseptic buffer or storage tank between thermal processing (e.g., UHT) and downstream filling. It can operate standalone or inline within a complete packaging line and is suitable for beverage production environments handling PET, glass, or carton filling operations. Format changes are minimal since storage capacity and process parameters are recipe-controlled. Inline integration with UHT, aseptic valve manifolds, and fillers Standalone operation for batch buffering and sterile hold Compatible with CIP/SIP plant utilities and sanitary piping Ideal for modernization of a second hand or used bottling line Machine Condition & Maintenance History The pressure vessel (tank body) is newly manufactured in 2025, paired with system documentation and aseptic process lineage originating from a 2011 Tetra Pak aseptic system. The unit is offered as second hand equipment and is ready for operation upon proper installation and commissioning. Availability of technical manuals supports maintenance planning, preventive routines, and efficient start-up. Body is new (2025) with documented pressure test and design ratings Provided with technical manuals, preventive maintenance references, and flow/layout documents Prepared for swift recommissioning in industrial packaging facilities Operational Performance & Versatility Engineered for hygienic and aseptic conditions, the tank provides stable pressure/vacuum capability for sterile storage.

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, machine/vehicle number: N/A, Equipment: head guard, A robust capper for applying roll-on-pilfer-proof (ROPP) caps to bottles Capacity: 400-600 bottles per hour, depending on operator Benchtop operation 4 roller stainless steel capping head Heads can be changed on the machine to allow the application of different sizes of cap with the same machine Stainless steel frame and case Dual push-button safe operation Hodpfjx E S Nuox Ag Defr

Condition: used, Year of construction: 2000, Technical Specifications & Performance Data The Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction. Manufacturer: Bertolaso Model: Syncronia 16-16-1-840 Year: 2000 Container type: Glass bottles Rinser: 16 grippers with penetrating nozzle and double inert gas treatment Filler type: Gravity/light depression with nitrogen support Corker: Single-head straight corking with inert gas and vacuum corking Formats: Compatible with 0.375L and 0.75L bottle formats Electrical: 400 V, 50 Hz CIP readiness: Integrated CIP with stainless steel dummy bottles Model code & configuration: Syncronia 16-16-1-840 Hfodpfx Aox E Sm Tsg Der Advanced Automation & Control Systems The monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production. Production Line Integration Capabilities Designed for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts. Machine Condition & Maintenance History The machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability. Operational Performance & Versatility This monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks.

Condition: used, Year of construction: 2000, Technical Specifications & Performance Data The Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction. Manufacturer: Bertolaso Model: Syncronia 16-16-1-840 Year: 2000 Container type: Glass bottles Rinser: 16 grippers with penetrating nozzle and double inert gas treatment Hfedpfxox E Sndj Ag Djr Filler type: Gravity/light depression with nitrogen support Corker: Single-head straight corking with inert gas and vacuum corking Formats: Compatible with 0.375L and 0.75L bottle formats Electrical: 400 V, 50 Hz CIP readiness: Integrated CIP with stainless steel dummy bottles Model code & configuration: Syncronia 16-16-1-840 Advanced Automation & Control Systems The monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production. Production Line Integration Capabilities Designed for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts. Machine Condition & Maintenance History The machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability. Operational Performance & Versatility This monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks.

Condition: used, Year of construction: 2000, Technical Specifications & Performance Data The Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction. Manufacturer: Bertolaso Model: Syncronia 16-16-1-840 Year: 2000 Container type: Glass bottles Rinser: 16 grippers with penetrating nozzle and double inert gas treatment Filler type: Gravity/light depression with nitrogen support Corker: Single-head straight corking with inert gas and vacuum corking Formats: Compatible with 0.375L and 0.75L bottle formats Electrical: 400 V, 50 Hz CIP readiness: Integrated CIP with stainless steel dummy bottles Hfjdpfx Agox E Snks Dor Model code & configuration: Syncronia 16-16-1-840 Advanced Automation & Control Systems The monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production. Production Line Integration Capabilities Designed for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts. Machine Condition & Maintenance History The machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability. Operational Performance & Versatility This monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks.

Condition: used, Year of construction: 2000, Technical Specifications & Performance Data The Bertolaso Filling Monoblock Syncronia 16-16-1-840 is a second hand bottling monoblock designed for high-quality beverage production on glass bottles. This used bottling line component integrates rinsing, filling, and corking in a compact rotary platform engineered for reliable industrial packaging performance. Manufactured by Bertolaso, the machine features an inert gas management concept for both bottle conditioning and closure, making it an excellent choice for premium products requiring oxygen reduction. Manufacturer: Bertolaso Model: Syncronia 16-16-1-840 Year: 2000 Container type: Glass bottles Rinser: 16 grippers with penetrating nozzle and double inert gas treatment Filler type: Gravity/light depression with nitrogen support Corker: Single-head straight corking with inert gas and vacuum corking Formats: Compatible with 0.375L and 0.75L bottle formats Electrical: 400 V, 50 Hz CIP readiness: Integrated CIP with stainless steel dummy bottles Hsdpsx E Snqsfx Ag Djfr Model code & configuration: Syncronia 16-16-1-840 Advanced Automation & Control Systems The monoblock includes process features aimed at consistent quality and reduced oxygen pickup. The rinser employs double inert gas treatment to pre-condition the bottles. The filler operates in light vacuum/gravity mode with nitrogen, complemented by level control at the valve. A sensor detects hanging bottles at the outfeed to protect product flow and minimize stoppages. Integrated CIP and stainless steel dummy bottles enable efficient cleaning-in-place procedures across rinsing and filling turrets, supporting hygienic operation in beverage production. Production Line Integration Capabilities Designed for industrial packaging environments, this monoblock can operate as a standalone unit or be integrated into a complete used bottling line. It is optimized for glass bottle handling and can interface with upstream conveyors and downstream inspection or labeling systems. Format flexibility includes 0.375L and 0.75L sizes, and quick changeover is supported by the turret design and format parts. Machine Condition & Maintenance History The machine is in excellent overall condition and has processed approximately 1,000,000 bottles over its lifetime. Its condition and integrated CIP system suggest careful operation and maintenance, making it suitable for facilities seeking ready-for-operation bottling equipment with proven reliability. Operational Performance & Versatility This monoblock is particularly suited to oxygen-sensitive products handled in glass bottles. The double inert gas rinsing, nitrogen-assisted filling under light depression, and vacuum corking with inert gas injection collectively provide robust oxygen management. The machine’s engineering by Bertolaso is recognized for precision filling, gentle handling, and closure integrity with straight corks.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1606, total height: 2,500 mm, total width: 1,700 mm, total length: 3,400 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 230 V, power: 7 kW (9.52 HP), compressed air connection: 3 bar, control voltage: 230 V, Equipment: documentation/manual, Cimec – Triblock Mondial LD 16/16/1 Year of manufacture: 2016 16 rinsers – 16 filling valves – 1 capper Clockwise rotation Speed: 3,000 bottles per hour (33 cl) Well maintained Detection for too few bottles (at infeed) and too many bottles (at outfeed) Manual available Rinser Bottle inversion and pre-rinsing with CO₂ or a sterilizing liquid Height adjustable (automatic lift) Filler Low vacuum (with vacuum pump) Hedpfx Aex Ebvbog Dsfr Removable filling nozzles Very easy to clean via CIP Dummy bottles for CIP Height adjustable (manual) Capper Type AROL Eagle C Crown caps (steel) Vibratory cap feeder Overflow jet (with warm water) Height adjustable (manual) Caps: 26 mm Format parts: APO 33 cl APO 75 cl (offer available to expand the set of format parts) Inspection / testing possible

Condition: used, Ejection height :2.4mHeight : 3.2m  Hjdpfx Aex Dc H Eog Djfr

Condition: used, Year of construction: 2018, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. Hfjdpfx Agsx Dbkco Dsr ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.