Strijelac d.o.o.

Condition: good (used), Year of construction: 2008, functionality: fully functional, 6 x used block stacking machines Gbodpoz Rxdlsfx Akyju Manufacturer: Kolbus Model: STA 840 Year of manufacture: 2008 Condition: used, but functional

Condition: used, 7268 - Láng ~2500-Litre Stainless Steel Tank / INOX Vertical Industrial Tank €1,310 In stock Láng ~2500-Litre Stainless Steel Tank / INOX Vertical Industrial Tank, Used Equipment Technical Data: Manufacturer: Láng Gépgyár (Láng Engineering Works Co., Budapest) Year of Manufacture: 1980 Gbsdez Rxc Ijpfx Akyou Serial No.: 11244 Material: Stainless Steel (INOX) Net Weight: 280 kg Overall Dimensions: Ø 1200 mm diameter × 2200 mm height Estimated Volume: approx. 2200–2500 litres Equipment and Features: Large, bolted flanged side manway / inspection opening for easy internal maintenance and inspection Upper and lower pipe connection nozzles Durable, heavy-duty industrial construction

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DIESEL ATLAS COPCO XAS 88 compressor with an aftercooler (dryer), fully serviced. Compressor complete with documentation for registration in Poland. Technical data: flow rate: 5.20 m3/min; operating pressure: 7 Bar; year of manufacture: 2019; weight: 750 kg; engine: KUBOTA; compressor in fully working condition. net price: PLN 57,500 Gbsdpfx Akjz Rxczsysu gross price: PLN 70,725 Below is a link to a video showing the machine in operation.

Condition: used, Year of construction: 1988, functionality: fully functional, Sheet metal straightening machine Manufacturer: ARKU, Type: RM5075 Year of manufacture: 1988 Technical data: Manufacturer: ARKU Type: RM5075 Year of manufacture: 1988 Passage width: 750 mm Straightening roller diameter: 50 mm Number of straightening rollers: 21 pcs. Material thickness: 6 mm Setting resolution: 0.01 mm Max. vertical roller spacing: 10 mm Infeed table length: 750 mm Throughput speed: 4-20 m/min Chain drive Gbodpfx Aoz Rxcujkyju Connected power: 8 kW Drive motor: 7.5 kW Gear pump: 0.18 kW Dimensions (W x D x H): W 2.30 x D 1.80 x H 2.10 m Weight: approx. 5 tons Accessories: - Operating manual All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Year of construction: 2014, condition: good (used), Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 Gjdpfx Aoz Rxb Rjkyobu -Minimum workpiece length: 180 mm -Minimum workpiece width: 65 mm -Workpiece thickness: approx. 12 to 50 mm -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm -Feed rate: max. 5 m/min -Adhesive system: Hot melt adhesive granules in the glue pot located below -Dimensions: 2000/720/H1235 mm -Weight: 300 kg

Condition: used, TOX Pressotechnik Industrial Pneumatic Press Station / Pneumohydraulic Press with Roller Guide Table (6 bar, 2.4 m), Used Equipment Technical Data: Type: Industrial Pneumatic / Pneumohydraulic Press Station Overall Dimensions (W × D × H): 1300 × 1270 × 2400 mm Roller Feed Conveyor Dimensions: 470 × 500 mm Work Table Internal Opening / Clearance: 450 × 550 mm Press Cylinder and Drive Data (TOX Pressotechnik): Manufacturer: TOX Pressotechnik GmbH (Made in Germany) Type: Q-K 015.030.200.12 Serial No.: 340379.117 Gbodpfxez Rxb De Akyeu System: Pneumohydraulic power cylinder (TOX Powerpackage) Maximum Air Pressure: 6.00 bar Oil Volume (ΔV): 135 ml Equipment and Features: Enclosed, sound-insulated safety cabin with inspection window and upward-opening door Heavy-duty four-column press frame for precise parallel alignment Integrated roller feed conveyor for easy workpiece handling Pneumatic air preparation unit (pressure regulator and filter) and emergency stop button Overall Dimensions: Width: 1300 mm Depth: 1270 mm Height: 2400 mm

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2016, total length: 13,710 mm, total width: 2,470 mm, total height: 1,630 mm, suspension: air, tire size: 385/55-R22.5, color: black, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = 2016 D-TEC FlexiTrailer Traction with ABS/EBS, SAF axles with disc brakes, lift axle on the 1st axle, adjustable twistlock front arm for optimal axle load and traction with heavy 20-foot tank containers, extendable in the middle and at the rear, suitable for all containers, ADR (EX/II, EX/III, FL, AT), unladen weight: 4,575 kg, permissible gross weight: 43,000 kg, tires: 385/55-R22.5 (tread depth left: 7/14/6 mm; tread depth right: 6/14/6 mm), German registration = Further information = Gbodpfjz Rxbwjx Akyeu Axle configuration Tire size: 385/55-R22.5 Axle brand: SAF DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread depth left: 45%; Tire tread depth right: 40% Rear axle 2: Max. axle load: 9,000 kg; Tire tread depth left: 90%; Tire tread depth right: 90% Rear axle 3: Max. axle load: 9,000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Weights Unladen weight: 4,575 kg Payload: 38,425 kg GVWR: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER TRACTION Condition Technical condition: good Optical condition: good Identification License plate: OHAIY602 Further information Please contact Arne Honingh for further information.

Condition: new, mileage: 750 km, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 6x4, wheelbase: 36,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, trailer coupling, - Leaf spring suspension - Differential lock - Sun visor EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. MAN TGS 33.480 BB 6x4 EURO 6e 3-sided tipper EuromixMTP Vehicle Data Year of manufacture: 2026 New vehicle MAN TGS 33.480 6x4 BB CH Wheel arrangement: 6x4 Permissible total weight: 33,000 kg Wheelbase: 3,600 mm Engine: MAN D2676 353 kW (480 hp) 2,450 Nm torque Emission standard: Euro 6e MAN TipMatic 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Cab NN (narrow, medium-length, normal height) Cab color: Pure white (RAL 9010) Engine & Drivetrain Equipment MAN D2676 Euro 6e engine 480 hp / 2,450 Nm MAN TipMatic 12-speed automatic transmission Efficiency driving program Maneuvering program Idle Speed Driving High-performance engine brake MAN EVBec Heated fuel filter Fuel pre-filter with water separator Gearbox PTO Preparation for engine PTO MAN EasyStart start assist system Chassis Wheel arrangement 6x4 Leaf spring suspension front and rear Front axle 8,000 kg Rear axles, each 13,000 kg Differential locks on both rear axles Axle ratio i = 3.63 Front, rear and second rear axle stabilizer Wheels & Tires Steel rims 9.00 x 22.5 Tires 315/80 R22.5 Tire pressure monitoring system (TPM) Tire temperature indicator Tire pressure indicator for trailer Wheel nut covers Cab & Comfort Gbsdpfxoz Rxbqo Akyju Cab NN Air-suspended comfort driver's seat with armrests Co-driver's seat with storage box Multi-function steering wheel 12.3-inch Professional instrument cluster Digital tachograph with remote download MAN Media System Advanced with navigation MAN SmartSelect control MAN Sound System Advanced Tipper Equipment: EuromixMTP Three-sided tipper EMK3- Type: EuromixMTP EMK3 Description of the tipper body: Length: 5,200 mm Width: 2,380 mm Side boards: 900 mm Front wall: 1,118 mm Floor: 5mm HARDOX 450 Side boards: 4mm HARDOX 450, left: EuromixMTP hydraulically operated, right: manually pivoting side board Rear wall: automatically pivoting 4mm Hardox 450 Front wall: 4mm HARDOX 450 Rear wall: 4mm HARDOX 450 Hydraulics: - Penta tipping cylinder with end-of-stroke limitation, - Control block (main valve) - pneumatic tipping valve - pneumatic switching valves for tipper – valve on the subframe - pump and oil tank Your advantages • Immediately ready for use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contact persons • Denis Omeragic: German, English, Bosnian, Croatian, Serbian) • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica...

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/1999, total length: 11,660 mm, total width: 2,470 mm, wheelbase: 8,570 mm, color: other, Year of construction: 1999, Equipment: ABS, Superstructure Tank capacity: 32600 liters = More information = Gbjdpfxjz Rxbks Akyou Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 7.410 kg Carrying capacity: 31.590 kg GVW: 39.000 kg APK (MOT): tested until 03/2027 Registration number: OF-56-YB

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DIESEL ATLAS COPCO XAS 88 compressor – machine after a full service. Compressor with documentation for registration in Poland. Technical data: capacity: 5.20 m3/min; working pressure: 7 Bar; year of manufacture: 2019; weight: 750 kg; Gbedsz Rxa Tspfx Akyeu engine: KUBOTA. Compressor is in full working order. Net price: PLN 52,500 Gross price: PLN 64,575 Below is a link to a video showing the machine in operation.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 01/1991, loading space length: 13,470 mm, loading space width: 2,450 mm, loading space height: 2,670 mm, total width: 2,500 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,110 mm, color: other, Year of construction: 1991, = Additional options and accessories = - Air Suspension Gbsdpfx Aez Rxa Hskyju - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Tyre profile: 30% Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Weights Empty weight: 7.100 kg Carrying capacity: 24.900 kg GVW: 32.000 kg Identification Registration number: OB-25-PK

Condition: used, mileage: 639,814 km, power: 291 kW (395.65 HP), first registration: 02/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, total length: 6,200 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Max. front axle load: 7500 kg Max. rear axle load: 11500 kg Weights Empty weight: 7.180 kg Carrying capacity: 11.820 kg GVW: 19.000 kg Max. towing weight: 50.000 kg Interior Gsdpfxoz Rxayo Akyjbu Number of seats: 2 Identification Registration number: 55-BJF-2

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 05/2000, loading space length: 13,450 mm, loading space width: 2,430 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, wheelbase: 9,600 mm, color: other, Year of construction: 2000, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes - Steering Axle = More information = Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Empty weight: 7.900 kg Carrying capacity: 24.600 kg GVW: 32.500 kg Godpfx Asz Rxatekyebu Registration number: OG-37-HG

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/1995, total width: 2,500 mm, suspension: air, tire size: 385/65R 22.5, tire condition: 20 %, wheelbase: 8,070 mm, color: other, Year of construction: 1995, Axle configuration Tyre size: 385/65R 22.5 Make axles: BPW Tyre profile: 20% Brakes: drum brakes Suspension: air suspension Max. front axle load: 9000 kg Middle axle: Max. axle load: 9000 kg Max. rear axle load: 9000 kg Godpfx Asz Rxamokyebu Weights Empty weight: 7.570 kg Carrying capacity: 31.430 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 05/2027 Identification Registration number: OD-19-PX

Condition: new, mileage: 1 km, power: 132 kW (179.47 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2026, Number of doors: 5 Cabin: double Number of cylinders: 4 Engine displacement: 2,200 cc Godpfx Akoz Rxagjysbu Overall condition: very good Technical condition: very good Visual condition: very good Damages: none Warranty: none

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 4-axis DOOSAN DNM 5700 was manufactured in 2022. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse X/Y/Z: 36 / 36 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Power supply: 380 V, 3-phase, 50/60 Hz • Standard-height column • Tool breakage detection • Ball screw nut cooling • Coolant level sensor Gbodpfx Aez Rw U Ajkyeu Additional equipment • 4th axis • Hydraulic system (3A + 1B) • Automatic doors • Robot interface • Chip conveyor • Oil skimmer • Mist collector interface Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, STC-Ref: G-062-4939 Stahl Ti-52/4-KBK-Fi-52, Year: 2000 equipped: - Tri Creaser - Paper weights: 40–250 g/m² - Knife folding unit KBK 52, 1 knife/Messer - working width max. 520 mm - folding length min. 4 cm - Output max.45.000 strokes/hr. - 1st folding unit: 4 buckle plates - noise hoods - shingle delivery Gedpjz Rw Uvsfx Akysbu - cross fold unit - perforating device - Max. format: 520 × 840 mm - Min. format: 100 × 150 mm - flat pile feeder Fi-52 --> available: 12/2026

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, STC-Ref:G-691-0105 Gsdpfx Aksz Rw T Ssysbu Nagel Foldnak-2 ,Year: 1995 equipped: - Standard equipped machine - 2 loop stitching heads --> available: 11/2026

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, type of input current: three-phase, total width: 1,050 mm, total length: 3,800 mm, total height: 1,750 mm, input current: 5 A, Schou L-2500 Heavy duty universal line boring machine Manufacturer: Schou & Co. Ltd., Copenhagen, Denmark Production era: Late 1970s – mid-1980s (Heavy Duty series) Gbodpfxsz Rw T Ee Akysu Design: Precision bore machining equipment for line boring engine blocks and gear casings Maximum boring length: 2500 mm Boring diameter range: 25 mm – 200 mm (depending on accessories) Table length: 2500 mm Spindle speed: Infinitely variable or multi-stage adjustable hydraulic/mechanical drive Feed: Automatic, fine-adjustable longitudinal feed for micron-level surface finish Frame structure: Vibration-free, special cast-iron bed with integrated support bridges Machine weight: approx. 1800 – 2200 kg (depending on equipment) 2. Accessories and equipment • Complete boring bar set (in various diameters and lengths) • Precision clamping blocks and support units for block alignment • Centering bridges and dial indicator measuring devices • Tool setting micrometer • Integrated control panel with emergency stop • Boring grinder / milling auxiliary unit (depending on model)

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis COMEVA MEX V 2100x3260 was manufactured in 2018. It features a working area of 2150 x 3250 mm and is driven by Yaskawa servos. The machine is equipped with a 9 kW ISO30 routing spindle, a 7-position automatic tool changer, and an HSD C-axis for aggregate machining. If you are looking to get high-quality CNC wood machining capabilities, consider the COMEVA MEX V 2100x3260 machine we have for sale. Contact us for further details. • Working area: 2150 x 3250 mm • Driven by Yaskawa servos • 9 kW ISO30 routing spindle • HSD C-axis for aggregate machining • 7-position automatic tool changer • Automatic lubrication system • Drilling unit for vertical and horizontal drilling • 2 vacuum areas with 4 zones, digitally switchable • Tool length sensor Gedsz Rw Txjpfx Akyjbu • Pneumatic dust extraction valves • 8 pneumatic material positioning stops • ESA control system • Currently operated using a Fusion 360 post-processor Additional equipment • 2 Becker vacuum pumps (approx. 290 m³/h) • 4x raised vacuum pods for panel routing

Condition: used, Year of construction: 2026, CORMAK WRHS 1610 Mast Pallet Truck is a professional device designed for fast and efficient lifting and transporting of heavy loads in warehouses, production halls, and other industrial environments. Thanks to its advanced construction and high-quality components, this mast pallet truck provides reliability, efficiency, and safety during daily operations. Its main advantages are a high load capacity and significant lifting height, making it an ideal solution for handling pallets and working as a pallet stacker in various industrial applications. Main advantages of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck has been designed for demanding users who require durability, high performance, and operational safety. Its robust construction and functional solutions make it an essential tool for warehouse operations. Key benefits: High load capacity – a maximum lifting capacity of 1000 kg allows the truck to handle heavy pallets and large-sized loads efficiently. Lifting height of 1600 mm – enables convenient storage of goods on warehouse racks, helping to optimize available storage space. Polyurethane wheels – high-quality wheels provide smooth movement, quiet operation, and long service life, even under demanding warehouse conditions. Ergonomic design – the mast and handle are designed for operator comfort, allowing easy handling while reducing physical strain. Durable and stable construction – the strong steel mast ensures stability during lifting and lowering operations, guaranteeing reliable and safe performance. Construction and technology of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck combines high-quality workmanship with modern technical solutions. Mast construction The mast is made of high-quality steel, providing excellent resistance to mechanical damage. Its rigid design ensures load stability and safe transportation during lifting operations. Wheels and rollers The truck is equipped with durable polyurethane wheels with dimensions of 180 × 50 mm and fork rollers measuring 74 × 70 mm. These components ensure smooth, quiet, and stable movement on various types of surfaces. Ergonomic operator handle The manual control handle has been designed to provide comfortable operation and easy maneuvering, even in narrow warehouse aisles. Advanced lifting system The WRHS 1610 features: Two lifting options: manual and foot-operated lifting Stepless fork lowering speed adjustment Truck locking system Brakes on both steering wheels for improved safety and stability during operation Standard equipment Load capacity: 1000 kg Lifting height: 1600 mm Steel mast with reinforced construction Polyurethane steering wheels Fork rollers for smooth movement Manual and foot-operated lifting system Adjustable fork lowering speed Locking system and brakes on both steering wheels Ergonomic operating handle Technical specifications Parameter Value Load capacity 1000 kg Lifting height 1600 mm Gbjdpfxez Rw Trj Akysu Fork dimensions (L × W) 1150 × 145 mm External fork width 550 mm Distance between forks 230 mm Height with lowered forks 1970 mm Height with raised forks 1970 mm Minimum fork height 90 mm Overall length 1630 mm Overall width 740 mm Turning radius 1400 mm Steering wheels 180 × 50 mm Fork rollers 74 × 70 mm Weight 181 kg ATTENTION!!! Customer return: used machine. No warranty or returns!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, DIESEL KAESER M20 compressor, recently serviced!!! Compressor with documentation for registration in Poland. Technical data: capacity: 2.00 m3/min; working pressure: 7 Bar; engine: KUBOTA operating hours: 842h!!! year: 2018 Compressor is in perfect working order, ready for use, with warranty. net price: 22,500 PLN gross price: 27,675 PLN Gbsdpfxsz Rw Tls Akyju Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2012, The VEMAG HP30E vacuum filler is one of the most powerful models in the HPE series from the VEMAG brand, manufactured in 2012, designed for efficient filling and portioning of meat mixtures in large food processing plants. With a capacity of up to 8,700 kg/h, portioning from 5 g to 99,999 g, and a speed of over 600 portions per minute, the machine performs well in large-scale production of sausages, salami, and cold cuts. How does the VEMAG HP30E vacuum filler work? Raw material goes into the 350-liter hopper, from where it is fed into the filling system operating under vacuum. The vacuum system with a capacity of 40 m³/h removes air from the mass, so the product is compact, uniform in structure, and stable in color. Two separate VEMAG Duo-Drive drives — one for the conveying elements and one for the feed — allow continuous processing of even cold and firm masses, and the controls allow the portion size to be set precisely in the range from 5 g to 99,999 g. The machine works with clippers, linkers, forming machines, and hanging machines in complete production lines. Key advantages of the VEMAG HP30E vacuum filler Very high capacity of up to 8,700 kg/h and a portioning speed of over 600 portions/min allow continuous work with large batches of raw material. The wide portion weight range — from 5 g to 99,999 g — provides great flexibility, since both small portions and large products can be produced on a single machine. A one-piece hopper with optimized feed unit seals ensures reliable sealing and full emptying, which limits raw material losses. The electronics are protected by the VEMAG “box-in-box” system, and vacuum operation improves the quality, color, and shelf life of finished products. Technical specifications of the VEMAG HP30E vacuum filler Manufacturer: VEMAG Gbedpfx Asz Rw Tfjkysu Model: HP30E Year of manufacture: 2012 Power: 34 kW Filler capacity: up to 8,700 kg/h Portion weight: from 5 g to 99,999 g Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Air demand: approx. 40 l/min Hopper capacity: 350 l Application of the VEMAG HP30E vacuum filler The VEMAG HP30E vacuum filler is used in large meat processing plants for producing sausages, salami, cold cuts, fillings, and formed masses. Thanks to its ability to work continuously with cold and firm masses and to cooperate with peripheral equipment, it suits automated production lines.

Condition: used, Year of construction: 2026, functionality: fully functional, The CORMAK FM230 Dust Collector is a professional dust extraction system designed for small and medium-sized woodworking workshops. Featuring a compact design, 1,000 m³/h airflow capacity, and a standard 230 V power supply, it efficiently removes sawdust, wood chips, and fine dust without requiring costly electrical upgrades. Equipped with a durable WhirlWind metal impeller and a mobile wheeled base, the FM230 combines reliable performance with high build quality for everyday workshop use. Key Features High extraction capacity of 1,000 m³/h – effectively removes sawdust, chips, and dust from woodworking machines. Standard 230 V power supply – plugs into a conventional mains outlet without electrical modifications. WhirlWind metal impeller – provides stable operation, excellent durability, and resistance to heavy workloads. Mobile wheeled base – allows easy movement around the workshop using robust bearing-mounted wheels. Sealed filtration system – efficiently separates dust particles, helping maintain cleaner workshop air. Ø100 mm extraction inlet – compatible with most woodworking machines and extraction hose systems. Construction and Technology The FM230 is equipped with a multi-blade steel impeller engineered for high airflow performance while maintaining relatively low operating noise. The machine is mounted on a sturdy mobile frame, making it easy to reposition even in confined workshop spaces. The dust collector features two heavy-duty bags—a filter bag and a collection bag—manufactured from durable materials that provide excellent airflow while maintaining effective filtration. A quick-release clamping system allows fast bag removal and replacement without the need for tools. Performance and Efficiency The CORMAK FM230 woodworking dust collector is highly effective at extracting dust directly from machines such as: Panel saws Surface planers Thickness planers Spindle moulders Tenoning machines With an airflow capacity of 1,000 m³/h, the FM230 maintains a clean working environment even during intensive woodworking operations. Weighing just 27 kg, its compact footprint makes it an excellent choice for workshops where space is limited. Applications The FM230 is ideal for: Professional and hobby woodworking workshops Joinery and furniture production Cutting, routing, planing, and sanding wood-based materials Machines equipped with Ø100 mm extraction ports Mobile workstations requiring a portable dust extraction solution Standard Equipment Fabric filter bag Waste collection bag WhirlWind metal impeller Mobile base with wheels Gjdpfx Aksz Rw S Usyjbu Bag mounting clamps Optional Equipment Flexible Ø100 mm extraction hoses Y-connectors and reducers for multiple machine connections High-efficiency filter bags Noise reduction silencers Technical Specifications Specification Value Motor power 0.75 kW Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,020 Pa Noise level 70 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,500 mm Width 420 mm Length 600 mm Power supply 230 V / 50 Hz Weight 27 kg ATTENTION!!! Customer return: used, dirty bag. No warranty or returns!

Condition: used, Approx. 24 Tonnes of Invar Grade Ni36 Assorted Sizes (Specialised Nickel-Iron Alloy) Gedpfx Akez Rw S Ieyebu Grade Ni36 Invar of varying sizes.