Yenkal Maki̇na A.ş

Condition: used, Year of construction: 2020, This Geko generator, manufactured in 2020, will be auctioned off online in our industrial auction / machinery auction as part of the Lagerbereinigung (stock clearance) event by Schnelle & Co. Ebi GmbH – construction equipment, power tools, accessories. You can find this and many other items on our platform. Lhsdpfxezv Sddj Apmek

Condition: used, This Schwamborn vacuum unit, manufactured in 2017, will be auctioned off online as part of our industrial auction / machinery auction for warehouse clearance, organized by Schnelle & Co. Ebi GmbH – construction equipment, power tools, and accessories. You can find this and many other items on our platform. Lodpfxezv Scyj Apmohk

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00669, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2014.07. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Year of Manufacture Robot: 2014.07 Warranty term (months): 12 Lsdpfx Apezv Scgjmehk   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ±0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1280   Controller: IRC5 Year of Manufacture Cabinet: 2014.09 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: good (used), SCM P64 Four-Sided Planer Ledpfx Apozv Scaemohk - Planing width 18 cm - Planing height 12 cm - Cutterhead set, standard cutters - 2 feed speeds - Electric height adjustment for the upper planing head and feed rollers - All spindles are adjustable vertically and horizontally Machine in very good condition.

Condition: used, Year of construction: 2003, Milling machines Travel distance X: 415 mm Travel distance Y :340 mm Travel distance Z: 355 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: HSK 40 E spindle revolutions: 42000 rpm table size X: 470 mm table size Y: 400 mm max. workpiece weight: 500 kg tool changer: 30 - time Rapid traverse: 30 m/min electronic handwheel Lhodpfx Apezv Sb Nemsk

Condition: used, This Lissmac stone cutting machine, manufactured in 2019, will be auctioned online as part of our industrial auction / machine auction, inventory clearance sale by Schnelle & Co. Ebi GmbH – construction equipment, power tools, accessories. Lhodpozv Sb Asfx Apmek You can find this and many other items on our platform.

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 36 t, Bending length [mm] 1020.00 Press force [tons] 36 Control system TRUMPF TASC 6000 Standard equipment Standard equipment Machine - Stable machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 3 axes X1, R1, Z1 Tool clamping - Upper tool holder, self-centering, manual clamping - Lower tool holder, manual clamping, hardened Lodpfx Apozv Sbvsmohk Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock speed - 1 GB RAM - 15-inch touch screen Safety - Side-swinging safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting (LED) at the front - 2 document holders Productivity Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser)

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning Ledezv Sbispfx Apmehk + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: used, This Cedima joint cutter, manufactured in 2018, will be auctioned online as part of our industrial auction / machinery auction for warehouse clearance – Schnelle & Co. Ebi GmbH – construction equipment, power tools, and accessories. You can find this and many other items on our platform. Lhedpfjzv Sbcex Apmok

Condition: used, Year of construction: 2012, operating hours: 18,252 h, lifting height: 5,220 mm, free lift: 1,780 mm, fuel type: electric, mast type: triplex, fork length: 1,000 mm, fork width: 920 mm, total height: 2,250 mm, total length: 1,770 mm, total width: 990 mm, color: orange, Empty weight: 2.767 kg Lifting capacity: 1.300 kg Ledjzv Sa Sepfx Apmjhk - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 515063C00343 - Operating hours: 18252 - Lifting capacity: 1300kg - Lifting height: 5220mm - Overhead clearance: 2250mm - Free lift: 1780mm - Fork length: 1000mm - Maximum fork width: 920mm - Minimum fork width: 160mm - Number of wheels: 3 Wheels - Attachment: Side-shift - Options: Non-marking tires, Work lights, Free-lift - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: Classic/24V 7EPZS 805 - └ Battery year of construction: 2012 - └ Capacity: 805Ah - └ Battery voltage: 24V - └ Tray length [mm]: 830 - └ Tray width [mm]: 435 - └ Tray height [mm]: 630 - Transport dimensions: 1770mm x 990mm x 2250mm (l x w x h) - Transport weight [kg]: 2767kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system Lodszv Sa Ejpfx Apmshk - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: used, This lot, consisting of pallet racking, will be auctioned off online as part of our industrial auction / machinery auction for warehouse clearance at Wirthwein Sasbach – pallet racking and cardboard boxes. Lodpfxjzv Saxs Apmehk You can find this and many other items on our platform.

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Ljdpfx Apszv Saremshk Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: like new (used), Year of construction: 2023, Shimadzu LC-2050C 3D + RF-20AXS – Complete HPLC System – 2023 For sale is a high-end Shimadzu LC-2050C 3D liquid chromatograph, additionally equipped with a Shimadzu RF-20AXS fluorescence detector. Both instruments were manufactured in 2023. The set is unused and in very good cosmetic condition. System Configuration • Shimadzu LC-2050C 3D – Integrated HPLC System • Built-in PDA (Photodiode Array) detector • Shimadzu RF-20AXS – External FLD (Fluorescence Detector) • Integrated autosampler • Sample cooling • Column thermostat • Four-component low-pressure gradient • Integrated touchscreen panel • Dell computer • UPS / Emergency power supply • Accessories and cables as shown in the photos Shimadzu LC-2050C 3D – Key Parameters Pump • Flow rate setting range: 0.0001–10 mL/min • Four-component low-pressure gradient • Gradient setting range: 0–100%, step 0.1% • Maximum pressure: • 50 MPa at flow rates of 0.0001–3 mL/min • 44 MPa at flow rates of 3.0001–5 mL/min • 22 MPa at flow rates of 5.0001–10 mL/min • Integrated mobile phase degassing system Autosampler • Automatic sample injector • Sample injection volume range (standard configuration): 0.1–100 µL • Sample injection volume accuracy: ±1% at 50 µL • Sample cooling/thermostating capability • Sample cooling temperature range: 4–45°C PDA Detector The LC-2050C 3D version features an integrated PDA (Photodiode Array) detector, enabling spectral recording and analysis of multiple wavelengths. Thanks to the PDA detector, the system allows not only for standard chromatographic analysis but also for spectral evaluation of detected substances. Shimadzu RF-20AXS Fluorescence Detector The system has been additionally equipped with a high-sensitivity RF-20AXS fluorescence detector, significantly increasing the analytical capabilities of the entire set. RF-20AXS Parameters • Light source: Xenon lamp • Additional low-pressure mercury lamp for wavelength accuracy control • Wavelength range: 200–750 nm • Spectral bandwidth: 20 nm • Wavelength accuracy: ±2 nm • Wavelength repeatability: ±0.2 nm • S/N for the Raman peak of water: ≥2000 • Standard flow cell: 12 µL • Maximum cell pressure: 2 MPa • Cell thermostat • Ability to monitor two pairs of excitation/emission wavelengths simultaneously The combination of PDA + FLD (Fluorescence Detector) provides a wide range of analytical capabilities and allows for the determination of both standard UV/Vis absorbing compounds and substances requiring highly sensitive fluorescence detection. Device Data Shimadzu LC-2050C 3D • CAT. NO.: 228-65822-58 • Year of manufacture: 2023 Shimadzu RF-20AXS • CAT. NO.: 228-65305-58 • Year of manufacture: 2023 Application The system is intended for, among others: • Pharmaceutical laboratories • Quality control • Chemical laboratories • Food industry • Environmental research • Research and development laboratories • HPLC analyses requiring PDA detection • Trace analyses using fluorescence detection Condition Year of manufacture: 2023 Device is unused. Lhodpfezv Saljx Apmek Very good cosmetic condition – consistent with the photos. Sale of a complete set: Shimadzu LC-2050C 3D + RF-20AXS + Dell computer + UPS + accessories shown in the photos. Additional photos, serial numbers, and information about the device can be provided upon request.

Condition: good (used), Year of construction: 2017, functionality: fully functional, X Working range max.: 2000 mm (without repositioning) Y Working range max.: 1250 mm Control: Bosch PNC-P Machine - C-frame - Coordinated guidance - Linear magazine with 15 positions for clamping jaws and tools - Hydraulic clamping jaws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable retaining device - 1st stop pin (right, inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable retaining device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet Lhodpfezv Safex Apmok - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping jaw - Foot switch for start - Warping detection - Vibration-damped installation - 5 RTC cassettes with die plates

Condition: like new (used), Year of construction: 2023, For sale is a used Format4 Kappa 450 panel saw with a cutting length of 2800 mm. The machine is used as an exhibition model in our showroom and is therefore in new condition. Technical data: - Cutting length 2800 mm - Cutting width 800 mm - Cutting height 155 mm - Max. saw blade diameter 450 mm - Electrically adjustable in height + swiveling - Dust extraction port Ø 120 mm - Motor power 7.5 kW / 10.2 HP - Year of manufacture 2023 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, panel saw, Format Ljdpfxjzv R U Uo Apmehk Reference: R-D1618

Condition: used, Year of construction: 2020, operating hours: 9,385 h, lifting height: 4,480 mm, free lift: 1,580 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, fork width: 900 mm, total height: 2,050 mm, total length: 2,050 mm, total width: 1,140 mm, color: orange, Empty weight: 3.554 kg Lifting capacity: 2.000 kg Price: On request - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516230X00074 - Operating hours: 9385 - Lifting capacity: 2000kg - Lifting height: 4480mm - Overhead clearance: 2060mm - Free lift: 1580mm - Fork length: 1200mm - Maximum fork width: 900mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: Side-shift, 4th valve to fork carriage - Options: Free-lift, Non-marking tires, Half cabin - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: Hawher/48V 5PZM 625 - └ Battery year of construction: 2019 - └ Capacity: 625Ah - └ Battery voltage: 48V - └ Tray length [mm]: 820 - └ Tray width [mm]: 630 - └ Tray height [mm]: 630 - Transport dimensions: 2050mm x 1140mm x 2050mm (l x w x h) Lhedpfx Apozv R U Iemjk - Transport weight [kg]: 3554kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: like new (used), Year of construction: 2017, operating hours: 485 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26080.9198 Category: Demo Mast: 2F2350 Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Hours: 485 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7935 System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Ljdpfozv R I Usx Apmshk Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Type = Cat 3D (allowed in ZONE 22) Temperature class = 200*C (= T3) C - Db

Condition: like new (used), Year of construction: 2017, operating hours: 633 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26082.2204 Cat.: Demo Mast: 2F2350 Lhsdpfozv R I Iox Apmjk Forks: 1250 mm Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Hours: 633 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7936 System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Type = Cat 3D (permitted in ZONE 22) Temperature class = 200*C ( = T3) C - Db

Condition: like new (used), Year of construction: 2017, operating hours: 3,537 h, load capacity: 1,600 kg, lifting height: 3,050 mm, fuel type: electric, mast type: duplex, construction height: 2,070 mm, Manufacturer + model: LINDE E 16 L - 386 / 02 * EX * Proplan 2G / Zone 1 * Mast: 2F3050 ID: 26083.0458 Category: Used Mast: 2F3050 Lowered height: 2070 mm Lifting height: 3050 mm Capacity: 1600 kg Year: 2017 Hours: 3537 hours Capacity: Complete NEW * 48v / 625ah * Mfg. 05/2026 Options: * EX * Proplan !!!!! Lhsdpfx Apszv R Izemjk System / Certificate = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T4 Equipped with: - CONTAINER specifications!! - Joystick control for forward and reverse - S.s. & 4V - Complete street lighting - Windshield & Roof window - Headlights front and rear - Flashing light - Blue spot light - 2D - FFL mast

Condition: good (used), power: 5.5 kW (7.48 HP), Item: LC-5833 - Centrifugal pump - LKH-20/155SSS Alfa Laval - Centrifugal Pump LKM Type: LKH-20/155 SSS, 5.5 kW Lhodjzv R Iuspfx Apmek

Condition: used, machine/vehicle number: FN 355916, operating hours: 3,228 h, This Jungheinrich TFG 319 gas-powered forklift is being auctioned off in our industrial auction/machine auction, which includes a range of items being cleared from stock, sold from our warehouse, and consisting of individual/exhibition pieces, all online. You will find this and many other items on our platform. Lhsdpfjzv R Injx Apmsk

Condition: like new (used), Year of construction: 2019, operating hours: 4,788 h, load capacity: 1,600 kg, lifting height: 5,450 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 *Mast: 3F5450 ID: 26084.5626 Category: Used Mast: 3F5450 Lowered height: 2480 mm Lifting height: 5450 mm Capacity: 1600 kg Year: 2019 Hours: 4788 hours Battery: Complete NEW * 48v / 625ah * Manufactured 05/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (approved for ZONE 1 & 2) Gas group = IIB Temperature class = T4 Type = Cat 2D (approved for ZONE 21 & 22 - Dust) Gas group = IIIB Temperature class = T 135 *Equipped with: - Joystick control for forward and reverse - Triplex FFL mast - Complete street lighting - Roof window - Headlights (front and rear) Lhedpfx Aezv R Ihepmsk

Condition: used, functionality: fully functional, mileage: 320,549 km, power: 368 kW (500.34 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,287 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 7, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Globetrotter XL Cab, extra high sleeper. Single energy battery system (2 batteries). D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Aux. cab heater: 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres - 315/60 R22.5. Rear tyres - 315/60 R22.5. SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel. Wheelbase 3800 mm. Max capacity fuel tanks 570 LITRE ( 150 US GALL.), RIGHT SIDE FUELTANK 900 LITRE, LEFT SIDE FUEL TANK WITH STEPS 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED headlamps Lodpfx Apezv R Ibjmjhk V-shaped Front fog lights - white Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 251,866 km, power: 368 kW (500.34 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,287 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 7, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Globetrotter XL Cab, extra high sleeper. Single energy battery system (2 batteries). D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Aux. cab heater: 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres - 315/60 R22.5. Rear tyres - 315/60 R22.5. SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel. Wheelbase 3800 mm. Max capacity fuel tanks 570 LITRE ( 150 US GALL.), RIGHT SIDE FUELTANK 900 LITRE, LEFT SIDE FUEL TANK WITH STEPS 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. FMS gateway for Fleet Management System. Lsdpfszv R H Rsx Apmehk Exterior LED headlamps V-shaped Front fog lights - white Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm