Zahoo - mensch sein gmbh

Condition: used, Year of construction: 2008, sheet width - max. 5-150 mm coil weight 2,0 t Belt thickness 0,2-1,5 mm band speed 0-20 m/min driving torque 290 Nm table-size 1500 mm Dodpfx Afsyr Slhjkjup Control Siemens-Leicht range L-W-H 2.000 x 1.500 x 1.900 mm total power requirement 0,75 kW weight of the machine ca. 0,6 t

Condition: good (used), functionality: fully functional, Motorized decoiler, manufacturer SOPREM Dujdeyr Rdcjpfx Afkop Load capacity: 200 kg Coil diameter: 900 mm Maximum strip width: 220 mm Expanding range: approx. 240 - 550 mm

Condition: new, functionality: fully functional, Year of construction: 2023, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, controller manufacturer: SIEMENS, coil inner diameter: 450 mm, coil outer diameter: 1,200 mm, coil weight: 500 kg, coil width: 300 mm, sheet thickness (max.): 3 mm, overall weight: 190 kg, power: 0.55 kW (0.75 HP), input voltage: 240 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Motorized Coil Sheet Decoiler Model: VILTECH/DOREMA DCT 500/4 CE Strip width: 10 – 300 mm Strip thickness: 0.3 – 2.5 mm (capable up to 3 mm) Coil inner diameter: 450 – 500 mm Coil outer diameter: max. 1200 mm Duodpjyqxx Eefx Afkjp Load capacity: 500 kg Motor: SIEMENS single-phase 0.55 kW Coil centering: manual Drive: geared motor transmission Operation: automatic with direction reversal Delivery from stock Also available: motorized, non-motorized, and hydraulic decoilers with load capacities from 200 kg up to 20,000 kg.

Condition: excellent (used), functionality: fully functional, Manufacturer Julius, type AH 41 Inner coil diameter from 250 to 300 mm Max. width 295 mm With brake Good condition, ready for immediate use Dujdpfx Ajyqmn Iofksp €550

Condition: used, Year of construction: 1973, material width 650 mm coil weight 2,0 t coil internal dia. 380 - 520 mm coil outside dia. 1500 mm speed 20 m/min Power capacity 2,0 kW Weight 1,4 t Dusdpfxeymp Szo Afksp Dimensions (WxDxH) 1,6 x 1,6 x 1,6 m decoiler H 2 with motor, hydraulic expansion, hydraulic snubber roll, coil loop control

Condition: used, Uncoiler S256 3Tn, made by KENT Dujdjyma A Djpfx Afksp Coil weight : 3 Tn Coil width : 250 mm Thickness : 0.8 - 3.2 mm SCOPE OF SUPPLY - 3Tn Single expandable uncoiler - Strip retainer - Control panel Coil weight: 3 Tn Coil width: 250 mm Thickness: 0.8 - 3.2 mm

Condition: used, OTO MILLS Double decoiler with bottom/top hold-down roll Model AD508SD Scope of supply includes: - Double hydraulic expansible mandrel Dusdpfx Asymadzjfksp - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Mandrel: Double hydraulic expansible mandrel Mandrel rotation: Hydraulic Uncoiler rotation/lock: Hydraulic Uncoiler traverse for alignment: Hydraulic Brake pneumatically-operated disc: OTO Mills

Condition: used, Year of construction: 1970, material width 200 mm coil weight 0,075 t coil internal dia. 290 - 450 mm coil external diameter 800 mm 26 U/min power requirement 0,25 kW Dedpfx Afsylzy Ijkoup Dimensions (WxDxH) 0,9 x 0,8 x 1,7 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, material width 50 mm coil weight 0,05 t coil internal diameter 300 mm Dusdpjylzyusfx Afkjp coil external diameter 680 mm weight 0,15 t dimensions (WxDxH) 0,9 x 0,9 x 1,3 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: good (used), Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors Duedpfx Aeylil Eofkjp -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Condition: used, Year of construction: 1979, material width 150 mm coil weight 1,5 t coil internal diameter 500 mm coil external diameter 940 mm strip material 20 x 1,0 - 50 x 4,0 / 200 mm wire diameter 1,0 - 5,0 mm power requirement 0,7 kW weight 0,7 t Dimensions (WxDxH) 1,0 x 1,7 x 2,0 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work Djdpfxeylclxj Afkjup free loaded to truck motoric driven palett decoiler band material approx. 20 x 1,5 mm - 50 x 4,0 mm / 200 x 2,0 wire diameter approx. 1,0 - 5,0 mm

Condition: excellent (used), functionality: fully functional, Motorized decoiler Capacity: 1,500 kg Length: 1000 mm Closed: 500 mm Duedpfx Asyi D Uisfkjp Complete with sheet metal measuring device Used Internal code: svr 383

Condition: used, Uncoiler, Sheet Metal Decoiler, Used machine Dodpfjyc Spbox Afkjup Manufacturer: GSW Schwabe AG Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via Djdpfx Ajycnf Sjfksup :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: good (used), functionality: fully functional, Year of construction: 2002, coil weight: 5,000 kg, coil width: 1,500 mm, total length: 3,300 mm, total width: 1,500 mm, total height: 2,000 mm, power: 7.7 kW (10.47 HP), Decoiler, Coil size 1500 mm, max. load 5000 kg, motor 7,7 KW, dimensions 330x150x200 cm, weight 2500 kg Dodpfjyci Smsx Afkeup

Condition: used, Decoiler and straightener, sheet uncoiler, sheet straightener, coil unwinder, feeder, used machine Overall dimensions: Width: 2000 mm Depth: 900 mm Height: 1500 mm Weight: 636 kg Decoiler coil diameter range (min–max): 360–520 mm Dujdpfx Aoybazpofkep Electrical data: 400V Straightening width: 205 mm Roller diameter: approx. 35 mm Lower roller set: 4 pcs Upper roller set: 3 pcs

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Year of manufacture: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons Duedjyangkopfx Afkep

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 14591-179, functionality: fully functional, operating hours: 54,119 h, Make: Röders Model: RPX 400 Dusdeyangdjpfx Afkep Year: 2018 Serial no.: 14591-179 Machine type: Gantry machining center / HSC high-speed milling machine, incl. cooling unit Axes: 3-axis Spindle / Tool interface: • Tool holder: HSK E25 (ISO) • Max. tool diameter: Ø 4 mm Worktable: • Table size: 450 x 300 mm • T-slots: 12 mm • T-slot pitch: 50 mm Workpiece capacity: • Max. workpiece height: 330 mm • Max. workpiece weight: 100 kg Travels: • X-axis: 410 mm • Y-axis: 294 mm • Z-axis: 210 mm Feed rates: • 0–60,000 mm/min Tool changer: • 18-position automatic tool changer Features / Equipment: • Ceramic bearings • Chip separator and chip conveyor • Includes Erowa ER-016841 UPC clamping chuck Hours: • Total hours (read): 54,119 h • Cutting/milling time: 29,529 h Weight: 3,200 kg Electrical: • 400 V • 32 A Overall dimensions: 2,515 x 1,930 x 2,080 mm

Condition: used, functionality: fully functional, Year of construction: 2015, The mechanical CIDAN decoiler DO is an easy-to-maintain decoiler with an adjustable central shaft. Dusdpfx Aox Sw U Nsfkep

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, control type: manual, degree of automation: manual, actuation type: manual, coil inner diameter: 370 mm, coil outer diameter: 430 mm, coil weight: 2,000 kg, coil width: 3,000 mm, -Double band decoiler with a disk; -3000 mm max coil width (when using 1 coil); -Loading up to 2000 kg max coil; -Dimensions shown in picture; -Barely used; Dujdpfx Afox Nf R Heksp -We can arrange transportation to any European Union country at buyers costs;

Condition: good (used), Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm -Weight: 35 kg Duodpfx Afox Ifc Tjksp

Condition: ready for operation (used), Uncoiler, Sheet Metal Decoiler, Used machine Manufacturer: GSW Schwabe AG Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Duodpfx Ajx Emdgsfkep Sheet width: 150 mm

Condition: used, Year of construction: 1980, material width 200 mm coil weight 0,15 t coil internal dia. 200 - 550 mm coil outside dia. 900 mm speed 6 - 30 U/min Weight 0,2 t Dimensions (WxDxH) 0,9 x 0,9 x 1,3 m SPECIAL DEAL Dedpfxsx Dnd Nj Afkeup as is where is WITHOUT putting into operation / WITHOUT additional work

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, For sale is our GSW feed unit / roller feeder from our mechanical department in Hungary (Szügy). Type: WV 65 / 80 Year: 2004 (very good condition). The feed unit / roller feeder is still installed in the line and can be inspected and demonstrated on site in Szügy, Hungary at any time. We are happy to answer your questions regarding our equipment. Technical data available as a PDF below. Dusdpfexy E Uwsx Afkep

Condition: ready for operation (used), decoiler OBRU 300 kg x 220 mm under power Djdpfx Aoxx R Utofkoup