It-Csv

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, Mazak Quick Turn SQT-18MS lathe with sub spindle. Equipped with chip conveyor, chuck, and accessories. Supplied with German manuals. The machine is available for immediate collection. Kfsdpfex Nbl Tsx Affoa

Condition: excellent (used), Year of construction: 2019, operating hours: 10,400 h, functionality: fully functional, Very good condition, only 10,400 spindle hours. Mainly used for small batch production in plastics. Year of manufacture: 2019. Can be inspected in operation until calendar week 03/2026. Control: Siemens 828 D Viewing possible by appointment at any time. Technical data: Swing diameter over cross slide: 85 mm Swing diameter over bed: 250 mm Maximum turning diameter: 85 mm Maximum turning length: 225 mm Maximum bar diameter: 25.5 mm Travel: Z-axis: 300 mm X-axis: 100 mm Tool turret with 12 stations, VDI16, of which 6 are driven. Spindle speeds: 0 - 6,000 rpm Main spindle: C-axis (spindle, resolution): 0.001° Machine weight approx. 1,200 kg Dimensions: Length: 1,700 mm Width: 1,250 mm Height: 1,800 mm Accessories: 2 axial driven tools, Kedpfjx Naacex Affefa 2 radial driven tools, 8 VDI16 tool holders, collet chuck for collets type: 385E, parts catcher, machine equipped with tailstock. Interface for bar feeder, interface for chip conveyor, LED signal lamp, machine keyboard. 4 wedge clamps, machine documentation.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, CNC Lathe DAEWOO PUMA 2000 SY. Swing diameter over bed: 600 mm. Maximum turning diameter: 330 mm. Maximum machining length: 510 mm. Bar capacity: 65 mm. X-axis travel: 250 mm. Z-axis travel: 580 mm. Y-axis travel: +50 - 50 mm. B-axis travel: 580 mm. Main spindle: 18.5 kW - A2-6" - 4,500 rpm. Subspindle: 7.5 kW - A2-5" - 6,000 rpm. Driven turret with 12 positions (BMT). FANUC 18iTB control (Manual Guide i). Chip conveyor. Tool presetter. Parts catcher with conveyor belt. In very good condition. Kfjdpfx Asx I Srnsffoa

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A travel -x axis 180 mm travel -y axis +/-45 mm - - - - - Main spindle - - - - - - - - - - - turning speeds 0 - 5.000 U/min bar capacity 65 mm --- Subspindle --- - - - - - - turning speeds 0 - 7.000 U/min bar capacity 42 mm --- upper turret 1 --- - - - - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X1 / Y1 / Z1 St. Tools speed 8.000 U/min --- upper turret 2 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Tools speed 8.000 U/min Number of axles X3 /Y3 / Z3 St. --- lower turret 3 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X2 / Z2 St. Tools speed 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex turrets designed for driven tools, as well as a bar feeder (Top Automazioni X-Files-S Series 3000, SX version). The machine has only 3.500h processing time hours. The machine is in good condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex Kfedpfx Aex I Shpjffsa

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Descriptionis and technical details are on photos. Ksdox I Rkpepfx Affofa

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Ksdpox I N Rbofx Affefa Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW Kfodpfex I N N Rox Affoa bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 2002, turning length: 1,000 mm, • Swing over bed: 520 mm • Swing over cross slide: 290 mm • Turning length: 1000 mm Kfodpfxox I Nwhe Affsa • Diameter of face plate: 250 mm • Spindle speed: 3000 rpm • Spindle power: 14 kW • Bar passage: 70 mm • Multifix tool turret • Tailstock quill extension: 180 mm • Tailstock quill diameter: 80 mm • Heidenhain control • Machine weight: 2.5 t

Condition: used, Year of construction: 2008, CNC Turning and Milling Center Machine type: DMG CTX beta 800 V6 Control unit: Heidenhain Turn Plus IT Year of manufacture: 2008 Operating hours: 36,180 h Spindle hours: 9,278 h TECHNICAL DATA: Max. turning length: 800 mm Turning diameter: 410 mm Max. swing over bed: 700 mm Main spindle Speed range: 4,000 rpm Drive power: 34 / 25 kW Bar capacity: 95 mm C-axis Counter spindle Speed range: 6,000 rpm Drive power: 26 / 22 kW Bar capacity: 52 mm Tailstock function Travel distances: X-axis: 300 mm Y-axis: 60 +/- mm Z-axis: 800 mm Number of turrets: 1 Tool holder: VDI 40 Tool stations: 12 Driven tools: 12 Features: Chip conveyor High-pressure pumps Oil mist extraction Kfsdpfx Afjx I Ithsfsa Bar feeder: LNS

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Kfjdsx I Ir Rjpfx Affsa Power Chuck Programmable Tailstock Chip conveyor

Condition: excellent (used), Year of construction: 2014, operating hours: 2,050 h, functionality: fully functional, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300S-H Year of manufacture: 2014 Spindle hours: 2,050 h Travels: X-axis: 695 mm Y-axis with stroke: +150 / -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: HSK 63 Kfjdpex I D Ubjfx Affsa Total number of tool stations: 40 Equipment: XA and YA axes with direct absolute measuring system (Okuma ABSO-Scale) In-process measuring with Renishaw probe for X/Z axis Measuring in Y-axis, including inclined-axis measurement mode Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Hollow clamping cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Multi-function tool software Harmonic spindle speed oscillation Simultaneous 5-axis machining software package Chip conveyor Coolant tank with high-pressure pump 70 bar

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ Ksdpox I A Hcsfx Affsfa • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories MARCELS MASCHINEN CH Kfjdpfx Asx I A Awoffja

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 50 mm, bar passage: 77 mm, counter spindle speed (max.): 4,000 rpm, distance between spindles: 1,300 mm, Original purchase price of the machine was over €500,000! Turning-milling center equipped with 2 turrets including milling drive and 2 Y-axes! TECHNICAL DETAILS Spindle distance: 1,300 mm Y-axis travel range: ± 50 mm Main spindle (BigBore 77) Main spindle speed range: 0 - 4,000 rpm Main spindle drive power: 29 kW Main spindle nose (DIN 55026): A2-8 Main spindle bar capacity max.: 77 mm Max. torque: 250 Nm Main spindle draw tube connection: M85 x 2 Counter spindle (BigBore 77) Counter spindle speed range: 0 - 4,000 rpm Counter spindle drive power: 29 kW Counter spindle nose (DIN 55026): KK 8 Max. torque: 250 Nm Max. chuck diameter: 250 mm Counter spindle draw tube connection: M85 x 2 BMT turret (upper right) Max. speed BMT turret (upper): 12,000 rpm Max. drive power BMT turret (upper): 10 kW BMT turret (lower) Max. speed BMT turret (lower): 12,000 rpm Max. drive power BMT turret (lower): 10 kW EQUIPMENT Hollow clamping cylinder including draw tube Part ejector Through-spindle coolant for sub spindle Sinumerik 840D-sl/OPERATE CNC control 22" multi-touch display IPC with 240 GB SHOPTURN conversational programming USB interface Network drive / Ethernet 3D simulation 2x 12-position BMT tool turrets C-axis for main and counter spindle TRANSMIT Software Chip conveyor Minimum quantity lubrication Control cabinet air conditioning unit Kodpfx Aex Iz U Ssffjfa Hydraulic unit Machine lamp 230 V power socket at the operator panel 5 leveling elements Documentation

Condition: ready for operation (used), Year of construction: 2020, General Data Kfedpfx Asx Ixigoffoa Measurements height 1858 mm Dimensions Machine Length 3675 mm Main Drive Spindle Speed 6000 RPM Number of axis 7 Spindle motor power 5.5 kW Technical Specification Driven Tools yes This 7-axis NAKAMURA Tome WT150 II was manufactured in 2020, featuring dual 12-tool turrets and motorized positions for enhanced flexibility. It includes a high-pressure coolant pump and a bar feeder interface with an LNS Quick Load Servo 80 S2. Ideal for complex turn-mill operations, consider the opportunity to buy this NAKAMURA Tome WT150 II turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2018, Nakamura-Tome NTRX-300 High Rigidity Multitasking Machine with NT Smart X Control, Halter Parts Loader & Fanuc Robot Kfodex Iv Nqspfx Affea NT Smart X (Fanuc31i-Guide i). Maximum Turning Ø640mm. Maximum Turning Length 1,100mm. Distance Between Spindles Min/Max 250-1,350mm. Main Spindle- Buck BBC 210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Sub Spindle- Kitagawa B-210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Axis Travel 'X'=700mm, 'Z'=1,125mm, 'Y'= ± 125mm, 'B2'=1,100mm. Driven Tool (Milling) Maximum Spindle Speed 12,000rpm (22/15kW Motor). Swivel Range 225° (-120°/+105°). Spindle Taper Capto C6. 80 Position ATC. Maximum Tool Ø90/Ø120mm (Non-Adjacent Tool). Maximum Tool Length 300mm. Maximum Tool Weight 12kg. S/No. RX300709 (2018). Halter Load Assistant U-20 Parts Loader with HALTER Smart Touchscreen Control- 72 Workpiece Positions. Workpiece Diameter (Min-Max) Ø10-230mm. Minimum Workpiece (L x W) 10 x 10mm. Maximum Workpiece (L x W) 230 x 230mm. Maximum Height of Workpiece 250mm. Maximum Load Capacity Robot Arm 20kg. With Sick S30A-4011CA Safety Laser Scanner. S/No. DCH0203 (2019). Fanuc Robot M-20iA Type A05B-1225-B252- 6 Axis, Payload 20kg, Reach Approx 1,811mm. S/No. R18704467 (2018). With Renishaw Tool Setting Arm, Renishaw Tool Breakage Detection, Renishaw Spindle Inspection Probe, Coolant System With 8 Bar Through Spindle Coolant, Parts Loading/Unloading Conveyor With Schunk Spindle Parts Gripper, Tri-Mist 1000 Mist Extraction Unit, Daikin Inverter Oil Chiller, LNS Turbo MH500 Chip Conveyor, Parts Catcher, Foot Switches, Signal Tower, Handwheel & Built in Control Manuals. Overall Dimensions L4,460 x D2,670 x H2,615mm. Weight 18,000kg. Note: Tooling Not Included.

Condition: excellent (used), Year of construction: 2019, Nakamura-Tome NTRX-300 High Rigidity Multitasking Machine with Halter Parts Loader, Fanuc Robot & Hydrafeed Barfeeder With NT Smart X (Fanuc 31i-Guide i) Control. Maximum Turning Ø640mm. Maximum Turning Length 1,100mm. Distance Between Spindles Min/Max 250-1,350mm. Main Spindle- Buck BBC 210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Sub Spindle- Kitagawa B-210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Axis Travel 'X'=700mm, 'Z'=1,125mm, 'Y'= ± 125mm, 'B2'=1,100mm. Driven Tool (Milling) Maximum Spindle Speed 12,000rpm (22/15kW Motor). Swivel Range 225° (-120°/+105°). Spindle Taper Capto C6. 40 Position ATC. Maximum Tool Ø90/Ø120mm (Non-Adjacent Tool). Maximum Tool Length 300mm. Maximum Tool Weight 12kg. S/No. RX300808 (2018). Halter Load Assistant S-230-20 Parts Loader with HALTER Smart Touchscreen Control- 12 Position Stacker. Workpiece Diameter (Min-Max) Ø43-230mm. Maximum Height of Workpiece 175mm. Maximum Load Capacity of Robot Arm 20kg. Maximum Total Weight on Rotating Table 1,250kg. Maximum Stacking Height 350mm. Number of Stacking Stations (1 Empty) 12. Maximum Weight Per Station 115kg. With Sick S30A-4011CA Safety Laser Scanner. S/No. DCH0300 (2019). Fanuc Robot M-20iA Type A05B-1225-B252- 6 Axis, Payload 20kg, Reach Approx 1,811mm. S/No. R18Y00642. Hydrafeed Multifeed Barfeeder Length 2,100mm. S/No. 6849. Kfedpsx Iv H Nofx Affsa With Renishaw Tool Setting Arm, Renishaw Spindle Inspection Probe, Coolant System With 8 Bar Through Spindle Coolant, Parts Loading/Unloading Conveyor With Schunk Spindle Parts Gripper, Daikin Inverter Oil Chiller, LNS Turbo MH500 Chip Conveyor, Parts Catcher, Foot Switches, Signal Tower, Handwheel & Built in Control Manuals. Overall Dimensions L4,460 x D2,670 x H2,615mm. Weight 17,000kg. Note: Tooling Not Included.

Condition: used, Year of construction: 1995, functionality: fully functional, We offer this used BIGLIA B. 500/SM CNC turning and milling center, year of manufacture 1995. Ksdsx Ivf Ejpfx Affofa

Condition: not inspected (used), Year of construction: 2005, turning length: 1,040 mm, turning diameter over cross slide: 420 mm, turning diameter: 520 mm, rotational speed (max.): 3,000 rpm, Fanuc 18I TB C axis SMW Autoblok chuck 12-position turret live tooling chip conveyor Kedpfxex Iryxj Affefa

Condition: ready for operation (used), Year of construction: 2011, Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 22 kW Movement X-Axis Movement 260 mm Z-Axis Movement 1010 mm Y-Axis Movement 120 mm Technical Specification Driven Tools yes This 3-axis Okuma LB 3000 EX turn-mill centre was manufactured in 2011. It features a maximum turning diameter of 340 mm, a turning length of 950 mm, and a spindle speed up to 5,000 rpm. The machine includes a 12-position tool turret and supports driven tool speeds up to 6,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma LB 3000 EX machine we have for sale. Contact us for more information. Kfsdpfsx Imqfsx Affoa Application Types Turning

Condition: ready for operation (used), Year of construction: 2010, This 5-axis Mazak Integrex 200 IV ST was manufactured in 2010, featuring high-pressure cooling at 70 bar and a 40-tool magazine complemented by 9 turret positions. It includes a SMW steady rest SR-3.1-MSW with a clamping range of 25-165 mm and two sets of SMW chuck KNCS-NB-260-78. Fully refurbished in 2020, it's prepared for a Renishaw probe and includes TOPSOLID 7.18 CAD/CAM software. Consider the opportunity to buy this Mazak Integrex 200 IV ST turn-mill centre. Contact us for more information. Application Types Turning Kfsdpex Imq Ejfx Affoa

Condition: good (used), Year of construction: 2001, operating hours: 62,911 h, functionality: fully functional, turning length: 2,000 mm, turning diameter over cross slide: 455 mm, turning diameter: 680 mm, CTX 600 E Year of manufacture: 2001 Control: Heidenhain Pilot 3190 Operating hours: 62,911 Working area: Centre distance: 2,000 mm Swing diameter over bed cover: 680 mm Swing diameter over cross slide: 455 mm Cross travel: 320 mm Longitudinal travel: 2,000 mm Tool turret: Number of stations: 12 Mounting: VDI 50 DIN 69880 Driven tools: No Headstock: Spindle nose Ø: 220h5 mm flat flange Front bearing diameter: 140 mm Spindle bore: 107 mm Max. chuck diameter: 315/400 mm Drive power, 100% duty cycle: 30 kW Max. torque: 650/2,000 Nm Spindle speed range: 4 – 2,800 rpm Feeds: Cross slide: 5,000 mm/min Longitudinal slide: 5,000 mm/min Rapid traverse X axis: 24 m/min Rapid traverse Z axis: 30 m/min Max. feed force X axis: 8 kN Max. feed force Z axis: 15 kN Tailstock: Quill diameter: 120 mm Quill stroke: 120 mm Taper: MK 5 Hydraulic steady rest, make SMW type SLU-5, clamping range 50 – 310 mm Kedsx Il Ngopfx Affsfa Hydraulic 3-jaw chuck, make Schunk Rota THW 120 400 Extraction unit by ifs - Industriefilter Chip conveyor by Bürener Maschinenfabrik Hydraulic unit replaced 2 years ago with new unit from Hawe

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Ksdpfox Ih Rtox Affjfa Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, TECHNICAL SPECIFICATIONS: CNC: Siemens 840D Powerline _ Working Area Swing over bed: 400 mm Swing over cross slide: 270 mm Turning length: 650 mm Transversal travel (X): 220 mm Longitudinal travel (Z): 700 mm _ Main Spindle Spindle nose according to DIN 55026 A (outer bolt circle): A6 Spindle diameter at front bearing: 90 mm Spindle bore: 65 mm Spindle nose taper: metric 72 (MK5) Motor power 40/100% duty cycle: 15 / 12 kW Max torque 100% duty cycle: 400 / 320 Nm Spindle speed: 4,000 rpm _ Cross Slide X/Z Transversal travel X: 220 mm Longitudinal travel Z: 700 mm Ball screw X/Z (Ø × pitch): 32 × 5 mm Rapid traverse X/Z: 15 m/min Feed force X/Z: 3 / 6 kN _ Tool Holder Number of tool stations (direct mounting): 8 Tool shank cross-section: 20 × 20 mm Tool disc wrench opening: 220 mm Boring bar shank diameter: 25 mm _ Tailstock Max quill force: 680 daN Taper: MK 4 Quill diameter: 65 mm Quill stroke (hydraulically movable): 40 mm _ Coolant System Capacity: 500 l Pump power: 1.20 kW Flow rate: 37 l/min Pressure: 1.9 bar Tank capacity: 25 l _ Electrical Requirements Kfodpjx Ihn Esfx Affea Connected load: 22 kVA Operating voltage: 400 V Frequency: 50 Hz Protection (slow-blow / VDE 0100): 35 A Voltage variation at 400 V: +6% / −10% _ Dimensions and Weight Overall dimensions (L × W × H, incl. chip conveyor): 2,100 × 1,750 × 1,710 mm Machine weight (without chip conveyor): approx. 2,800 kg _ Year of Manufacture 2008

Condition: used, Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, DMG Mori Sprint 20/8 + IEMCA bar feeder + filter station with high-pressure pump for tools. Year of production: 2022 Kfedpfox If T Sjx Affoa Operating hours: 5500 The machine is connected to the power supply and can be tested.