Admar

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system Kedpfxjzmyvis Aa Eedp The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Year of construction: 2026, condition: new, machine/vehicle number: AT111, New UHT tubular strilizer system for milk & cream - 10.000 LhTechnical Specifications & Performance DataThis tubular indirect UHT sterilizer is engineered for dairy processing with variable-speed operation and high thermal efficiency. It delivers dependable ultra-high-temperature treatment for milk and 40% fat cream with robust heat recovery and precise temperature control across each process stage.Capacity: Milk 10,000 L/h; Cream 40% fat 5,000 L/hHeat exchanger: Tubular, corrugated AISI 316 stainless steel tubesProduct inlet temperature: 8°CHomogenizing temperature: about 65–75°C (intermediate outlet available)Holding temperature: 90–95°CSterilization temperature: 135–142°C for 4 sOutlet temperature: about 20–25°CHeat regeneration: about 70% on tubular exchangerThermal profile: Heating 5→115°C (pressurized hot water at 132°C), Sterilization 115→142°C (industrial steam ~6 bar), Cooling 142→27°C (water at 17°C), Final cooling 27→25°C (water at 17°C)Balance tank: 200 L, vertical cylindrical, AISI 304 stainless steel, with 3 level probes and CIP spray ballProduct pump: Stainless steel centrifugal, special high-temperature mechanical seal, operating pressure 5–10 barElectromagnetic flow meter: Flanged, 4–20 mA outputHot water circulation group: High-efficiency pump, 14–16 bar, 10,000 L/h; stainless steel expansion vessel; safety valve; automatic refill; steam–water tubular heat exchangerTemperature regulation: Pneumatic modulating steam valve; high-efficiency steam trapOn-board CIP: Conductivity measurement, 2 chemical dosing pumps, 2 x 150 L AISI 304 tanks (acid and caustic)Construction: Pre-assembled on AISI 304 stainless steel skid with adjustable leveling feetAdvanced Automation & Control SystemsThe system is equipped with a modern automation platform to ensure stable UHT processing, traceability, and consistent product quality.Control architecture: Integrated PLC with a 12-inch HMI touch screenCabinet layout: Two AISI 304 stainless steel enclosures (electronics and pneumatics separated)Electronics cabinet: PLC, HMI, power and automation componentsPneumatics cabinet: Solenoid valves and air distributionAutomated functions: CIP cycle management, pasteurization/sterilization control, temperature regulation, alarm handling, safety interlocksProcess data logging: Continuous monitoring of temperatures, product pressure, holding time, and flow rateInstrumentation: Electromagnetic flow meter with 4–20 mA output for robust feedback controlProduction Line Integration CapabilitiesDesigned for seamless integration into dairy processing, beverage production, and industrial packaging environments, this U... Kdodpezmpznsfx Aa Esp

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Kodpfx Aezmd Uija Ejdp Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Year of construction: 2016, condition: used, Sanko FC-1000 Stick Filler Machine With All-Fill Multi 4 stage filling unit ser. No. 12401 filling unit (2016) "Please note the items in this lot 30466-445 are simultaneously offered in the combination lot 30466-443 as a complete line. The separte parts of the complete line 30466-443 are offered as individual lots 30466-444 to 30466-452 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Kdjdpfx Aszl Ud Sja Eep Successful bidders will be notified within 2 working days."

Condition: used, Year of construction: 2016, JBT International 16 Head Rotary Filler With 2 Mettler Toledo C Series /C3/C35 checkweighers Machine had complete refurbishment by original manufacturer 2020 Kdedpfxszl T Tlj Aa Eop "Please note the items in this lot 30466-369 are simultaneously offered in the combination lot 30466-348 as a complete line. The separate parts of the complete line 30466-348 are offered as individual lots 30466-349 to 30466-374 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2+N7 working days."

Condition: used, Line 4 Can Filling LIne 130 cans/min capacity 900g can weight 127mm can diameter comprising: Cap UV system with 3 Rittal Heraeus P6062.30S UV lamp units Cap inverter UV tunnel and conveyors Motorised Scoop Hopper with swan-neck conveyor Fully automated scoop sorting line with 2 Aylesbury Automation Euro 630 bowl feeders Isoma empty can rinser/ inverter S/N P160/CRL4. YOM 2016 Jorgensen fully automated depalletizing system Accusort AL5010 4 head Barcode reader with associated conveyor and controls Heraues H4087 Twin Lamp empty can UV tunnel Del Packaging BLE-35 motorised incline conveyor Del Packaging RF-6200 rotary capper feeder with integral UV tunnel Amberflex Spiralveyor SV spiral conveyor (2015) Thermo Scientific Ramsey Versaweigh checkweigher (2018) Domino case labeller with stand Oryx Automation CMWAP50 fully automated case packing machine Mettler Toledo Garvens XS3 automatic checkweigher with reject system and table Kedpfx Aaszl T Sbj Esdp Accusort AL5010 4 head barcode reader (2007) Del Packaging IPCN401-502 capper with cap detection (1993) Sleever International fully automated sleever Domino D620i twin head laser coding machine CSW Mini Multifeeder wide/54-MMFwide -01 can end feed system (2011) Heraues H4087 twin lamp full can UV tunnel Jorgensen 94302A outfeed can cleaner (2003) Dylog DYXIM D pass through X Ray machine (2015) Del Packaging CLPS scoop docking and over capping machine with scoop in cap detector system Shibuya Hoppmann scoop dropper feed and place system Shibuya Hoppmann Scoop dropper feed and place system with hopper JBT International 16 head rotary filler with 2 Mettler Toledo C Series checkweighers Isoma De-Eevator 01 can De-Elavator (2020) Heraues H4087 4 lamp top and bottom side UV tunnel Terlet 4 chamber vacuum and gassing system (1993) Please note : the following machines have been removed Angelus 56P can seamer (2007) Angelus can seamer Line 4 complete comprising items EU575759 to EU575790 Please note, this lot 30466-348 is offered for sale as a complete line. Its components are simultaneously offered as individual lots 30466-349 to 30466-374 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Year of construction: 2009, condition: ready for operation (used), Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible. Kdodpfxezhw Tnj Aa Eep

Year of construction: 2000, condition: ready for operation (used), A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible. Kdodezg Iquepfx Aa Eop

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: QP-25-AF, type of input current: three-phase, input voltage: 400 V, Qualipack QP-25-AF The fully automatic filling cycle begins by completely closing the bag valve and also registering the bag's weight. The next phase fills the bag, which is located on a load cell, with a rapid feed via a pneumatically operated slide gate and a screw conveyor. When the weight reaches a pre-set amount (typically around 95% of the required total), the slide gate closes to a slower feed rate until the required weight is reached, after which it closes completely. Once the screw conveyor has transferred all the product, it stops, and the valve seal is automatically released, ready for the bag to be removed. - Conveyor belts for filled bags - Sealers for filled bags - Weighing capacity: 5-50 kg - Accuracy: Within 25g - Filling rate: Up to 4 tons per hour - Filling method: 2-stage via a screw conveyor - Valve grip: Pneumatic (fully closed) Ksdezgtv Ajpfx Aa Esdp - Bag support: Height-adjustable gravity rollers - Product feed: Controlled by a pneumatic gate

Condition: ready for operation (used), functionality: fully functional, Filling heads: 8 volumetric filling heads Filling volume: 5 ml - 5,000 ml Capacity: 30 - 100 bottles per minute Suitable for pharmaceutical, chemical, and food products. Kodpfx Aszfpq Toa Esdp

Year of construction: 2010, condition: used, machine/vehicle number: HO1, Used Tetra Pak 4.3 T aseptic homogenizerTechnical Specifications & Performance DataThis industrial homogenizer is engineered for high-pressure processing and reliable particle-size reduction across beverage and food applications. Manufactured by Tetra Pak, the TA200 platform is recognized for stable operation, hygienic design, and robust components suitable for continuous-duty production. This unit is associated with a 250 bar rating, aligning with common requirements for dairy, juice, and beverage processing prior to filling and packaging on a used bottling line or second hand industrial packaging system.Manufacturer: Tetra PakModel: TA200Pressure rating: up to 250 bar (as indicated on the machine type plate)Design intent: High-pressure homogenization for beverage productionCE marking: PresentAseptic capability: Includes preparation/upgrading to aseptic homogenizationApplication scope: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe TA200 platform from Tetra Pak is designed to integrate with modern automation architectures used in beverage production. Typical interfaces support upstream and downstream synchronization with processing and bottling equipment. Operator-friendly controls and clear status indication help maintain repeatable results and reduce downtime.Integration-ready control interfaces for line automationProcess monitoring for pressure and flow stabilityDesigned for consistent homogenization performance at set pressureSafety interlocks aligned with industrial practiceProduction Line Integration CapabilitiesThis homogenizer is suitable for installation upstream of fillers and other bottling equipment within a used bottling line or a second hand beverage production plant. Its aseptic upgrade preparation supports integration into hygienic and ultra-clean process segments where product protection and shelf-life are priorities.Compatible with standalone or inline operationInterfaces with mixers, pasteurizers, and fillers in industrial packaging linesFlexible placement before filling of PET or glass containersSuitable for multi-product beverage workflowsMachine Condition & Maintenance HistoryThe unit is presented for sale with inclusion of preparation/upgrading to aseptic homogenization. It is positioned for rapid commissioning into beverage production environments. Routine maintenance practices can be applied in accordance with Tetra Pak guidelines to preserve performance and reliability.Commercially offered as a second hand industrial assetReady for operation subject to standard installation and commissioningOperational Performance & VersatilityHigh-pressure homogenization improves stability, mouthfeel, and product uniformity, enabling downstream filling into PET and glass packaging. The TA200 platform is widely used in beverage production where consistency and quality control are essential.Stable particle-size reduction at defined ... Kdjdpszd Ul Tsfx Aa Ejp

Year of construction: 2012, condition: used, machine/vehicle number: HO2, Used Tetra Pak TA25 6.3T aseptic homogenizerTechnical Specifications & Performance DataThis aseptic homogenizer is engineered for high-pressure product homogenization in beverage and food processing environments. Manufactured by Tetra Pak, the TA25 series is widely recognized for dependable performance and hygienic design. The offered unit corresponds to a TA25 configuration with an identified 6.3T variant and a pressure class indicated as 250 BAR. It is CE marked and built for applications requiring aseptic processing integrity. A preparation and upgrade package for aseptic operation is included, ensuring the machine is set up for sterile production workflows in industrial packaging and beverage production contexts.Manufacturer: Tetra PakModel: TA25Variant/Configuration: 6.3TPressure rating: 250 BARYear of manufacture: 2012Compliance: CE markedMachine type: Aseptic high-pressure homogenizerIncluded scope: Preparation/upgrading to aseptic homogenizerAdvanced Automation & Control SystemsDesigned for reliable process control, the TA25 platform supports precise pressure regulation and consistent homogenization performance. The machine features integrated operator controls for start-up, setpoint management, and safety interlocks. Its aseptic configuration enables controlled product handling, facilitating consistent quality and repeatability across production runs. The control interface is optimized for quick parameter adjustments and routine operations, helping reduce downtime and enhancing overall line efficiency in second hand and used bottling line projects.Production Line Integration CapabilitiesThis homogenizer integrates seamlessly into processing lines upstream of fillers in beverage production and industrial packaging environments. It is suitable for inline operation with pasteurization, sterilization, and CIP systems, and can be adapted to both standalone and fully integrated configurations. The aseptic upgrade package supports compatibility with aseptic tanks, valves, and downstream aseptic filling equipment handling PET or glass containers on bottling equipment. Its compact footprint and service access points facilitate installation into existing used bottling line layouts.Machine Condition & Maintenance HistoryThe unit is offered as a second hand machine in ready-for-operation status. The inclusion of preparation and upgrading to an aseptic homogenizer configuration supports swift commissioning and alignment with hygienic production requirements. Routine maintenance practices for this model typically include seal inspection, pump and valve checks, pressure calibration, and verification of aseptic barrier integrity.Operational Performance & VersatilityThe TA25 series is known for stable pressure delivery and efficient particle size reduction, contributing to product stability, mouthfeel, and shelf-life in beverage production. Its aseptic-ready design supports extended run times and reduced contamination risk, making it a strong fit for high-demand industrial packaging lines. The 250 BAR rating enables robust homogenization across a wide range ... Kjdpjzd Ulyjfx Aa Esdp

Year of construction: 2017, condition: used, machine/vehicle number: AT108, Used COMTEC heating tunnel - year 2017Technical Specifications & Performance DataThis COMTEC bottle heating tunnel is engineered to stabilize bottle temperature immediately after filling by showering containers with warm water. By reducing thermal shock, it helps protect both product integrity and container quality across a wide range of beverage applications. Manufactured in 2017, this second hand unit offers reliable performance for industrial packaging and beverage production environments, and can be integrated within a used bottling line or operate as a standalone temperature-conditioning module.Manufacturer: COMTECYear: 2017Model: 4MQProcess function: Post-filling warm-water spray (rain/shower) bottle heatingPrimary purpose: Temperature stabilization to reduce thermal shock and prevent bottle damageContainer compatibility: Designed for PET and Glass bottlesApplication stage: Downstream of filler, upstream of labeling/packagingOperating mode: Inline continuous tunnel with warm-water recirculation and spray distributionAdvanced Automation & Control SystemsThe tunnel utilizes controlled warm-water distribution to ensure even coverage and consistent temperature conditioning. Standard industrial controls enable operators to manage process parameters, monitor spray performance, and coordinate with upstream and downstream equipment. Integrated safeguards and interlocks support stable operation within modern bottling equipment setups.Centralized operator controls for process managementConsistent spray pattern for uniform bottle surface wettingDesigned for integration with line PLC/HMI architecturesOperator protections with standard industrial safety interlocksProduction Line Integration CapabilitiesEngineered for seamless integration into existing production lines, the heating tunnel connects easily to conveyors and synchronizes with fillers, rinsers, labelers, and downstream packaging machinery. Its post-filling placement makes it suitable for a wide range of formats and production speeds in beverage production and industrial packaging environments.Inline or standalone operationCompatible with typical bottle conveyors and accumulation systemsSupports multi-format operations common to used bottling line upgradesMachine Condition & Maintenance HistoryThis 2017 COMTEC tunnel is presented as a second hand solution in working condition, ready for operation within a modern packaging line. Its warm-water shower process helps extend container handling reliability, providing a practical enhancement to quality and throughput.Operational status: Ready for operationCommercial use: Suitable for integration into a used bottling line or industrial packaging cellOperational Performance & VersatilityThe tunnel’s warm-water shower process supports beverage producers seeking to minimize thermal stress following cold or ambient filling. It is well-suited to a variety of bottle sizes and shapes typical of... Ksdpszc Hqgjfx Aa Eedp

Year of construction: 2026, condition: excellent (used), functionality: fully functional, UNIVERSAL MANUAL ISOBARIC BOTTLE FILLING MACHINE for diameters from Ø 54 mm to Ø 69 mm, and for heights ranging from 195 mm to a maximum of 320 mm . For more information, please send us an email. Kedozbl Emjpfx Aa Esdp

Condition: like new (used), This type of machine is suitable for dispensing the following products: mustards, baby food, sauces, pastes, jams, etc. Kedpjzbi Ewefx Aa Esdp With their filling device, these machines are equipped for dispensing viscous products. The output varies depending on the product, format, and filling capacity. Features: Spindle feed.

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, Disassembled prototype filling/dispensing system – special system with V2A tanks For sale is a disassembled prototype filling/dispensing system from industrial use. This is a custom-made/special construction from Evonik/Daimler AG. The system was professionally disassembled, is in good condition, and is prepared for transport. Technical data / equipment * Manufacturer: Evonik / Daimler AG * System type: Prototype filling/dispensing system * Model: Special system / tank farm and filling system * Year of construction: 2010 * 2 tanks with 40 m³ each * 1 tank with 30 m³ * Tanks / system made of V2A * Pumps stored separately * Pump list can be provided upon request * Condition: disassembled, untested, prepared for transport Notes Due to the disassembled condition, the system is sold untested. An inspection is recommended. Technical testing, media compatibility, recommissioning, and transport organization are the responsibility of the buyer. Kdjdpfx Aaezabgwe Eop Further information, existing documents, and the pump list can be provided upon request. Please contact us preferably by email. Telephone inquiries should only be made after prior appointment.

Year of construction: 2013, condition: good (used), functionality: fully functional, Capacity: 9,000 bottles/hour Products: Milk, yogurt, probiotic and protein drinks Bottle volume: 150 ml The system consists of the following components: AUGENSTEIN washing machine (year of manufacture 2006) DECKERT bottle filling machine (year of manufacture 2003) ALCOA/Augenstein cup feeding and application system (years of manufacture 2003/2008) PACE bottle feeding and positioning unit (year of manufacture 2004) SLEEVER INTERNATIONAL pouch machine with steam tunnel (year of manufacture 2013) METTLER TOLEDO 3-scale and metal detector (year of manufacture 2008) Kdsdpfey Uy Iqsx Aa Eop Condition: used, fully functional

Condition: ready for operation (used), EN 12285-2 / Class B Above-ground, double-walled steel tank Tank interior: mill-rolled, exterior: sandblasted, primed and painted in RAL 7036 (plating grey) Equipment: - 2 welded steel support feet - Leak detector SGB 330 DL pressure leak detector with air (230V power connection on site) at the tank top with weather protection cover - Manhole fittings, vent, PVC gauge tube with gauge rod - Suction line in 1" with male thread at the tank top Kedjy Ur Hxopfx Aa Ejdp - 2" filling pipe with TW closure, suction line - 2 spare sockets with manufacturer's test certificate - With welded pump console at the front - With the inscription "Zieglmeier" - Hot-dip galvanized access ladder - With a crane lug - With a nameplate Limit switch 23 RO 400mm> Adjustable for above-ground and underground tanks for the storage of heating oil EL according to DIN 51603-1, diesel fuel according to DIN EN 590 and biodiesel according to DIN EN 14214. For cylindrical, horizontal tanks made of steel according to EN 12285-1, EN 12285-2 and EN 6624-1 as well as made of plastic or other recognized materials, whose design and dimensions comply with the standards listed above and which are approved according to their design. Also for cylindrical, vertical tanks made of steel according to DIN 6619-1, 6623-1. Cable connection box on the GWG. Ref. manufacturer article number 46125 Packing unit 1 piece Manufacturer name AFRISO Length 400 mm Connection 1" male thread Approval EMC directive (2014/30/EU) Weight 0.901 kg

Condition: used, functionality: fully functional, machine/vehicle number: SG600LC-YZ35-13, Equipment: CE marking, Model number: SG600FC/YZ35-13 Brand: CR Origin: China Certification: CE ISO9001 Flow rate: 1.3–12000 ml/min Display mode: LCD (English and Chinese language options) Control method: touchscreen + keypad Protection level: IP31 Dimensions: 305*232*285(mm) Pump head: YZ35-13 Model: SG600FC Speed range: 0.1–600 rpm Kedpfx Aey S Sfcoa Eodp Voltage: AC220V or AC110V

Condition: like new (used), The Mespack H320SCD is a high-speed solution for pre-made sachets with a maximum capacity of 1000 ml, featuring a single- or dual-lane sachet infeed conveyor. A pick-and-place system then transfers the pre-made sachets to the main module, where they are opened, filled and sealed at the top. Various pouch designs are available, such as flat pouches, stand-up pouches, shaped pouches, zip-lock pouches, corner and top seals for convenient product consumption, and more. Ksdpfx Aoy Nzm Dja Eodp Includes a sauce storage tank: Overall dimensions: 1.10 m x 1.05 m x 1.55 m. Usable diameter: 0.50 m. Usable height: 0.55 m. Capacity: 100 L MAXIMUM POUCH SIZE: Max width x height (mm): 160 x 350. Min width x height (mm): 90 x 120.

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Kdsdpfey I Ac Djx Aa Eep

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, For sale is a Nordson Pico Puls Jet system including accessories. The offer includes the following components: - 1 piece Pico Touch Controller (item no. 7361217) - 1 piece Pico Puls Jet valve (item no. 7361283) - 2 pieces 2m extension cable (item no. 7361298) - 1 piece quick-change holder for robots Additional accessories are available for purchase at an extra cost: - 1 piece Pico Puls fluid body 5.0 S P7 D15 (item no. 7362711); selling price 500.00 EUR each Kdsdpfx Aoy D Shboa Eop - 3 pieces Pico Puls fluid body 5.0 S F0 D30 (item no. 7362584); selling price 500.00 EUR each

Year of construction: 2022, condition: ready for operation (used), A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible. Kedpsy Ax Ufjfx Aa Eodp

Condition: used, Year of construction: 1994, Labelling machine, manuf. MAG, for 2,000 bph, with 1 station, operated on 0.5 l EURO bottles, running direction: left to right, year of manufacture: 1994 Kjdpfjyzh S Rox Aa Ejdp

Year of construction: 2025, condition: new, functionality: fully functional, We are offering this new LOWA GmbH Filling and Capping Systems capping machine, model WK12-17, bottle filling and capping machine, year of manufacture 2025. Manufacturer: LOWA GmbH Filling and Capping Systems Model: Capping Machine WK12-17 Machine type: Bottle Filling and Capping Machine Year of manufacture: 2025 Condition: new Category ID: 679 Kdsdeyybh Aopfx Aa Ejp If you have any questions or need more information, feel free to send us a message or call us.