Maschinen Fromm

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Credpfxjzy Hx Do Albeg Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: good (used), Year of construction: 2008, functionality: fully functional, For sale: a Knoll coolant filtration system. Technical data: Manufacturer: KNOLL Type: VRM 500 Design: Coolant/filtration system Application area: Machine tools / machining Crjdpfezy Hxqjx Albog Suitable for processing chips and coolant Used machine Further technical data can be found in the images. Condition: The machine is in used condition. An on-site inspection is possible by arrangement. Sale: Sale from the current location. Loading and transport can be arranged upon request. Errors, changes and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 48,246 h, travel distance X-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,000 mm, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, product length (max.): 4,500 mm, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2005. It features a travel of 750 mm in the X and Y axes, and 600 mm in the Z axis. The machine includes a robust table size of 1000 x 500 mm, with a maximum table load of 800 kg/m². If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. Codpfezy Hxdjx Alberg - Travel X / Y / Z: 2 x 750 mm (for shuttle mode) / 500 mm / 600 mm- Machine Table: 2 x (1,000 x 500 mm)- Additional Axes: 1x 4th axis- Table Load: max. 800 kg/m²- Tool Taper: SK 40 (DIN 69871 A)- Tool Changer: 22 positions- Max. Tool Length / Diameter: 400 mm / 85 mm (135 mm with free adjacent slots)- Max. Spindle Speed: 10,000 rpm- Spindle Power / Torque: approx. 30 kW / 143 Nm (at 40% duty cycle)- Rapid Traverse (X, Y / Z): 25–26 m/min (X, Y) / 20 m/min (Z)- Supply Voltage: 3x400V/230V/N/PE- Frequency: 50 Hz- Connected Load: 55 kVA- Backup Fuse: max. 100A- Control Voltage: 24V-- Machine Weight: approx. 8,500 kg- Footprint / Dimensions (L x H): approx. 4,500 mm x 3,000 mm- Control on: 127984 hours - Machine on: 119531 hours- Program on: 48246 hours

Condition: good (used), mileage: 975,559 km, power: 331 kW (450.03 HP), first registration: 12/2017, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 7,380 mm, loading space width: 2,450 mm, loading space height: 2,830 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, onboard computer, parking heater, retarder, soot filter, tail-lift, trailer coupling, = Additional Options and Accessories = - Enclosed cab - Cab - Alloy wheels - Air suspension - Particle filter - Sliding roof - Sleeper cab - Sun visor - Auxiliary heater = Notes = Scania S450 Highline 6x2*4 - Tautliner - Loadlift - Retarder - Full air - Sliding roof Model year: 2017-12-22 Mileage: 975,559 km YS2S6X20002142367 Box: 738 - 245 - 283 Loadlift Sliding roof Full air suspension Retarder Steering rear axle = Further Information = Technical information Number of cylinders: 6 Transmission Credpezy Hw Tofx Albsg Gearbox: Opti Cruise, 12 gears, automatic Axle configuration Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Alloy wheels; Max. axle load: 8000 kg; Steerable; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Alloy wheels; Max. axle load: 11500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Rear axle 2: Tire size: 385/55R22.5; Alloy wheels; Max. axle load: 7500 kg; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 12,210 kg Payload: 14,790 kg GVW: 27,000 kg Functional Tail lift: BAR, tailgate Condition Technical condition: good Optical condition: good

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Codpfezy Hw Hsx Alberg Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT23201013029, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space width: 2,540 mm, total length: 14,500 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: red, Year of construction: 2026, - Please note: archive photos! - Type SZS 300 spezial for truck transport #Chassis (low-loader semi-trailer) - Welded steel chassis, fifth-wheel coupling plate with replaceable 2" kingpin - Low-bed section from wheel area to gooseneck, inclined to approx. 210 mm loading height; rear sloped to wheel area - Hook-in rail for aluminium ramps at the rear, over the entire width - Wheel cover in galvanised sheet steel, removable - 1 towing eye at the rear, 10 t - Spare wheel with bracket on front bulkhead/external front tool box - 1 steel tool box on gooseneck, front transverse, approx. L=2400 mm, W=400 mm, H=600 mm, lockable - Electric cable winch, 24 V, pulling force 8165 kg, mounted front on gooseneck behind tool box on load bed, radio remote-controlled, cable length 35 m x approx. 10 mm, with roller cable guide window and 2 removable guide rollers on gooseneck and rear slope, incl. NATO socket on connection plate - 1 pair of wheel wells approx. 700 mm from gooseneck, recessed into floor, open to the outside. Note: main frame protrudes approx. 145 mm - 4 pairs of plug-in positions for wheel stops (Fliegl standard), without wheel stops - Spacer block for parking the semi-trailer, approx. 100 mm high and approx. 100 mm long - 2 plug-in wheel stops - Preparation for spacer inserts in the wheel well #Lashing points (low-loader) - 2 pairs of 2.5 t lashing eyes on the gooseneck - 7 pairs of lashing mushrooms, recessed top and side in the outer frame, 10 t each - 4 pairs of 10 t lashing eyes recessed in the top of the main frame side members - 1 screw-type lashing eye, 6.7 t each (JDT), rear centre in the ramp storage compartment - 1 additional folding lashing eye at the front in the low-bed, 10 t each #Axle & suspension - SAF drum brake axle - Air suspension with lift and lower valve #Wheels and tyres - 235/75 R 17.5" - Steel wheels, twin-mounted, factory silver #Braking system - 2-line air braking system - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, without connecting lines - EBS (electronic braking system) with EBS socket at the front, without connecting cable - Note: this trailer may only be towed by vehicles ensuring ABS effectiveness! #Electrics - 24 V multi-chamber LED lights with resistor, yellow LED side marker lights, LED number plate light - 2 white/red LED outline marker lights at the rear - 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front, without connecting cable - 2 white LED front position lights - 1 LED beacon with bracket - 1 additional LED work light, at the rear - 2 additional LED work lights, integrated in the gooseneck to illuminate the load bed #Floor - Gooseneck with steel chequer plate covering - Low-loader deck in perforated steel sheet; chequer plate covering in the wheel well area, removable sheet covering in the wheel arch area - Rear slope with perforated steel sheet #Side boards - Aluminium, 320 mm high, on the sides of the gooseneck, plug-in, approx. 2500 mm long Crjdpfx Aljzy Hwyobsg - Rear board, aluminium, 320 mm high, on the gooseneck, plug-in #Loading ramps - 1 pair of aluminium loading ramps, max. load capacity 12,000 kg per pair, length approx. 3400 mm and width approx. 320 mm, storage compartment between rear main frame side members #Registration / plates - Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear - With DEKRA inspection and report - Warning board to ECE-70

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. Credozy Hwmepfx Albog We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo Cjdpfezy Hwgjx Alberg • automatic exhaust air filter • electrical control unit • compressor.

Condition: excellent (used), Chip extractor Manufacturer: Ringler Connection hose: 60 mm Voltage: 380 volts Height: 1900 mm Depth: 950 mm Crodpfx Alezy Hwaobjg Width: 750 mm

Year of construction: 2011, condition: used, functionality: not functional, machine/vehicle number: 602166, Two Eclipse pyrolysis ovens with afterburners, controlled from a single central cabinet. Burner type: TJ 1x100 and 2x 075. Crodszy Hv Njpfx Albog

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Codpfjzy Hv Aex Alberg Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Crodjzy Hvpepfx Albog Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Crodozy Hvispfx Albjg Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Codpfx Aszy Hu Eelberg Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, fuel type: diesel, Year of construction: 2013, PEUGEOT BIPPER, 2013, 1.3MJT engine, 290,000 km, air conditioning. Vehicle in good condition. Csdpfx Alezy Hursborg

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Crsdpozy Hulofx Albog Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Cedpfszy Hufex Albjrg Throughput max. 4t/h depending on type of plastic and material thickness

Condition: reconditioned (used), functionality: fully functional, Drive power: 55-90 kW depending on the required performance and task Application: Drying and cleaning of hard plastics, PET flakes, films Credpfszy Ht Ujx Albeg Output: 800-2500 kg/h depending on the input material

Condition: new, Impact clearing needle (28697a) 8 mm, Class III Manufacturer: Hassan Savage, Type: EDP 11308 unused Codpfx Alszy Htzebsrg

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Credpfx Ajzy Htuelbog Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.

Condition: used, kW: 30 Cjdozy Hthepfx Alborg Rotor diameter: 500 mm Rotor width: 1200 mm

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Cedpfx Aezy Htbolborg Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt Crodpozy Hrqjfx Albsg • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: excellent (used), Spacer pins Manufacturer: Hassay Savage / Preci Tool Cjdpfxezy Hrds Albsrg Slot width: 3-4-5-8-12 mm Includes guide bushings and inserts.

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width Crodpfezy Hq Tsx Albog 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW