Valdeolivares

Condition: used, Year of construction: 2021, load capacity: 3,300 kg, lifting height: 6,850 mm, total length: 5,929 mm, - Max. Tragkraft 3300 kg - Max. Hubhöhe 6,90 m - Max. Auslage 3,90 m - Ausbrechkraft mit Schaufel 5770 daN - Kippwinkel 12° - Schüttwinkel 114° - Wenderadius (über Räder) 3,80 m - Heben 8,3s - Senken 6s - Teleskop ausfahren 7,30s - Teleskop einfahren 4,50s - Ankippen 3,40s - Auskippen 2,80s - Motor Hersteller: Deutz - Motornorm: Stage 5/Tier iV Final Iiedpsx I Skqefx Affjk - Motor Modell TD 3,6l - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4-3621 cm³ - Nennleistung Verbrennungsmotor - Leistung kW 75Hp / 55,4 kW - Max. Drehmoment / Motordrehzahl 340 Nm @ 1600 rpm - Zugkraft 8360 daN - Typ: Drehmomentwandler - Anzahl der Gänge (vorwärts/rückwärts) 4/4 - Max. travel speed 24,90 km/h - Parkbremse Handbuch - Feststellbremse - Hersteller der Achsen: Dana - Pumpenart: Zahnradpumpe - Hydraulikfördermenge / Hydraulikdruck 92,70 l/min / 260 Bar - Motoröl: 10 l - Hydrauliköl: 128 l - Fassungsvermögen des Kraftstofftanks: 120 l - Geräuschpegel im Fahrerstand (LpA): 79 dB(A) - Umgebungsgeräusch (LwA) 104 dB(A) - Schwingungsbelastung Hand/Arm:

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 25,000 mm, total length: 8,680 mm, - Drehbarer Teleskopstapler RTH 6.25 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 25,00 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min Isdpfx Aex I Skkjffjik - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss/Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe, Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 6.390 mm - Dieselkraftstoff 175 l - AdBlue 10 l - Hydrauliköl 165 l - Motoröl 9l - Kühlflüssigkeit 20l - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss/Casappa - Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss – Valvola elettroproporzionale SIL 2 - Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung , Steuerung mit CAN-Bus-Technologie

Condition: new, Year of construction: 2025, functionality: fully functional, Chipper heads for chipper canter sawmachine R200, 250 Isdpfx Afex I Skdefjik

Condition: used, Year of construction: 1999, fuel type: diesel, weight max. in kg 5 kg runs ja Ijdpfxox I Si Ts Affsik Sitz lifting capacity 5 Mast Number of working hours 7000 h

Condition: used, Year of construction: 2022, content 2000 L operating pressure 11 bar operating temperature -10 bis +50 °C In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Iiedpfex I Si Hox Affok Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2002, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 2.100 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Iiedpfsx I Siysx Affjk - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2009, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Iijdpfx Aox I Sitsffsk Technical features & accessories: - Roller conveyor - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm Iisdpox I Simsfx Affjk spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC Iedex I Sigspfx Affsik current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t

Condition: used, Year of construction: 2007, grinding range 600 x 450 mm magnetic plate size 600 x 400 mm Ijdjx I Siaopfx Affjik grinding wheel size 300 x 50 x 76,2 mm total power requirement 11 kW weight of the machine ca. 2,1 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 2022, output 15 kw operating pressure 11 bar motor rated speed 2.960 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two identical compressors are available. Ijdpfx Afsx I Sh Nefsik Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor Iijdpfx Afjx I Sh Asfjk - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 5 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Year of construction: 2022, condition: used, operating pressure 16 bar Max. inlet temperature compressed air 3 - 55 °C refrigerant R-513A: 1,00 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two identical refrigerated dryers are available. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Ijdpjx I Shvjfx Affeik Prior sale is reserved.

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A travel -x axis 180 mm travel -y axis +/-45 mm - - - - - Main spindle - - - - - - - - - - - turning speeds 0 - 5.000 U/min bar capacity 65 mm --- Subspindle --- - - - - - - turning speeds 0 - 7.000 U/min bar capacity 42 mm Iiedpfex I Shpsx Affsk --- upper turret 1 --- - - - - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X1 / Y1 / Z1 St. Tools speed 8.000 U/min --- upper turret 2 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Tools speed 8.000 U/min Number of axles X3 /Y3 / Z3 St. --- lower turret 3 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X2 / Z2 St. Tools speed 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex turrets designed for driven tools, as well as a bar feeder (Top Automazioni X-Files-S Series 3000, SX version). The machine has only 3.500h processing time hours. The machine is in good condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex

Condition: used, empty load weight: 6,450 kg, maximum load weight: 29,550 kg, first registration: 04/2017, next inspection (TÜV): 04/2023, total length: 9,500 mm, total width: 25,500 mm, total height: 30,000 mm, suspension: air, tire size: 385 / 65 R 22.5 / 3mm, front tire size: 385 / 65 R 22.5 / 3mm, operation weight: 36,000 kg,

Condition: used, mileage: 718,069 km, power: 520 kW (707.00 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 9,140 kg, maximum load weight: 16,860 kg, overall weight: 40,000 kg, tire size: 315 / 70 R 22.5 / 9mm, axle configuration: 6x2, wheelbase: 3,000 mm, next inspection (TÜV): 04/2025, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,700 mm, total width: 25,500 mm, total height: 38,000 mm, front tire size: 315 / 70 R 22.5 / 9mm, number of seats: 2, operation weight: 26,000 kg, Equipment: air conditioning,

Condition: refurbished (used), For sale is a König Mini Rex system. This includes a Mini Rex Futura 4000 head machine with a 2000 proofing cabinet. The machine has been overhauled and is in excellent condition. Year of manufacture: 2009. Weight range: 25 grams to 130 grams. Iisdpox I Sgxofx Affjk

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Iisdpfxex I Sgro Affjk Workingpiece thickness from to 8-60 mm Total length 3960 mm Feed speed 10 m/min. Weight 1055 kg

Condition: new, Year of construction: 2025, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1095 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table configuration 1. Bodor Power 12kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. mortise-and-tenon nameplate welded segmented bed 5. stretched aluminum gantry 6. bodor servo motor and driver 7. bodor rack and pinion 8. one-click processing 9. bodor lightning perforation technology 10. expert database for high-speed cutting 11. automatic adjustment of cutting gas pressure 12. open door protection 13. alarm function for cutting malfunction 14. ergonomic remote control (Bodor Mango®) Iijdex I Sglspfx Affek 15. active anti-collision function 16. intelligent anti-shake 17. gas-saving continuous flow nozzle 18. intelligent maintenance reminder 19. WIFI internet connection 20. water cooler 21. extraction system 22. wear parts set CUTTING CAPACITY: CARBON STEEL (mm) 35 STAINLESS STEEL (mm) 35 ALUMINIUM (mm) 25 OPTIONAL: LANTEK EXPERT II CUT Sotware incl. postprocessor

Condition: used, Year of construction: 1969, x-travel 710 mm y-travel 250 mm z-travel 400 mm table-size 1200 x 300 mm control konventionell tool adaptor SK40 turning speed range 50 - 2500 U/min total power requirement 2,2 kW Ijdpfx Afex I Sf Uofjik weight of the machine ca. 1,7 t dimensions 2,1 x 2,0 x 1,6 m Features: - Digital display - Coolant system - Huron milling head - Emergency stop device - Documentation

Condition: used, Year of construction: 1974, turning diameter over bed 550 mm turning diameter over slide rest 300 mm Ijdex I Sf Ispfx Affsik turning length 1650 mm centre height 275 mm spindle bore 82 mm spindle turning speed range 9 - 1800 U/min total power requirement 23 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 1,4 x 1,9 mm Lathes with: - Digital readout - Rapid traverse - Multifix tool post - Includes multiple tool posts - Forkardt 3-jaw chuck F400 - Coolant system - Machine light - Centering point - Chuck guard - Chip tray - Emergency stop device - Amperage display for main spindle

Condition: used, Year of construction: 2011, weight max. in kg 2000 kg stroke 3,3 mm fork length 1200 mm battery 48V / 575Ah weight of the machine ca. 4,5 t dimensions of the machine ca. 1,2 x 3,5 x 2,19 m Electric forklift with charger. Iiedpfjx I Sfzsx Affsk Only 2500 operating hours New battery in 2017 3.3-meter duplex mast 2000 kg lifting capacity 2.19-meter clearance height With side shift and fork adjustment Very good condition

Condition: used, Year of construction: 1995, saw blade diameter 450 mm Iodpfsx I Sfuex Affoik cutting diameter 130 mm cutting width 240 mm Cutting height 130 mm speed for saw blade 15 / 35 U/min weight of the machine ca. 0,85 kg dimensions of the machine ca. 1,2 x 1,2 x 1,85 m Cold circular saw with - Mitering device 45°/60° - Coolant system - 2 saw blades

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm Iodsx I Sfnopfx Affjik travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA weight of the machine ca. 5,7 t dimensions of machine L x W x H 3,57 x 1,75 x 1,75 m Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: used, Year of construction: 1961, faceplate diameter 1250 mm swing diameter 1400 mm turning height 950 mm drilling depth in one stroke 650 mm distance face plate/tool carrier 1000 mm vertical adjustment of the crossrail 800 mm workpiece weight 5 t Iiodpfxex I Sfhs Affok speeds 10,2 - 126,5 U/min feeds 0,07 - 5 mm/U rapid traverse 1300 mm/min weight of the machine ca. 12 t dimensions of the machine ca. 2,6 x 2,8 x 3,1 m Machine has one vertical head with 5 Pos. Only two holders will be supplied with the machine. Faceplate bearing was reconditioned. Spindle and spindle nut of cross axe has to be reconditioned.