Vogtländisches Kabelwerk GmbH

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Edger, trimming saw, multi-blade saw MADREW DCKWW 300/15 Year of manufacture: 2014 Machine is fully operational and in very good technical condition. TECHNICAL DATA: Saw spindle motor power: 15 kW Stepless feed speed adjustment: 6.0 ÷ 35 m/min Saw spacing with spacers (Board Width): 20 ÷ 300 mm Max number of saw blades: 4 Applicable saw blade diameters: Ø 250 ÷ Ø 400 mm Maximum cutting height: 120 mm Minimum board length: 1000 mm Cgedpfsx A Sfnex Ac Nsn The machine is equipped with interlock and safety systems, ensuring safe and reliable operation: - Phase sequence and phase loss indicator - Overload indicator for the machine due to blunt blades or excessive feed rate

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Crosscut circular saw with 2 double shafts – vertical and horizontal configuration. Designed for sawing battens, strips, slats, and separation cuts with minimal kerf width. Maximum cutting height: 200 mm. Maximum cutting width: 200 mm. Clamping bushings: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed speed frequency-controlled from 0 to 40 m/min. 8 pairs of powered feed rollers. Pneumatically adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with operating system. Saw bushings and tools included. Sound-insulated cabin. The machine is in very well-maintained condition and was only used occasionally. There is no visible wear on the feed rollers. The unit has not been in operation for 12 years. Cgodpfx Acex Ap Dzj Non Mechanization: - Infeed centering roller conveyor with adjustable feed gearbox. - Outfeed roller conveyor with integrated cross drag conveyor. - Both with adjustable feed gearbox. Mechanization system is from an older generation. - Electrical control cabinet with operating system. Gubisch Grimme Multi-blade Saw Cross-cut multi-rip saw Lamella multi-blade saw Cross-cut circular saw with two double shafts, vertical and horizontal execution. Suitable for cutting battens, strips, slats, and for separation cuts with a narrow kerf. Max. cutting height: 200 mm. Max. cutting width: 200 mm. Clamping sleeves 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed frequency controlled 0 – 40 m/min. 8 driven roller pairs. Pneumatically adjustable roller pressure. Electric height and width adjustment. Electrical control cabinet with controls. Saw bushings and tools. Sound-proofed operator cabin. The machine is in excellent condition and was only sporadically used. No visible wear on the infeed rollers. Not in use for the past 12 years. Mechanization: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated transverse discharge conveyor. Both with adjustable feed gearbox. Mechanization is of an older type. Electrical cabinet with control system.

Condition: new, Year of construction: 2025, cutting width (max.): 280 mm, cutting height (max.): 48 mm, saw blade diameter: 168 mm, cutting width at rip fence: 280 mm, Festool Cordless Table Saw CSC SYS 50 EBI-Set 36 Volt battery voltage, No-load speed 4,500 - 6,800 rpm, tiltable from -10° to +47°, cutting height 0 - 48 mm (at 45° = 34 mm), electric height and tilting adjustment with digital display maximum rip capacity 280 mm, sliding table with cross-cutting width up to 450 mm, miter angle stop 0 - 70°, complete with: saw blade 168 x 1.8 x 20 mm, Z = 42 tooth WD, parallel guide, push stick, angle stop, dust collection bag, riving knife for concealed cuts, riving knife with blade guard, 6 mm hex key, energy set SYS 18 V 2 x 5.5/TCL 6 DUO, stand UG-CSC-SYS Order No.: 577379 Codsxzudqspfx Ac Nogn available ex stock Seevetal, promotion valid until the end of 2025, while stocks last, without shipping and packaging

Condition: used, GRAULE AGT pull and table circular saw Cgedpfx Acexf Tr Uj Non

Condition: ready for operation (used), functionality: fully functional, Panel saw, saw-milling machine TRIUMPH T3000 Specification: • Condition - used, serviced • Manufacturer - TRIUMPH • Model - T3000 • Sliding table length: 320 cm • Scoring saw with separate motor • Main saw motor - 4.0 kW • Milling spindle motor - 4.0 kW • Scoring saw motor - 0.7 kW • Milling spindle diameter: 35 mm • Main saw spindle diameter: 35 mm • Variable speed adjustment on the milling spindle (via belt) • Manual lifting and lowering of the saw blade • Extraction ports: 120 mm • Weight approx. 900 kg • Transport dimensions: 330 x 120 x 110 cm (L x W x H) Additional information: • Good, original technical condition Csdpow Snbxefx Ac Njgn • Photos show the actual state of the item for sale • Possibility to power on and inspect the machine on site

Condition: used, SECOND-HAND RADIAL ARM SAW STROMAB Csdewr T Hbepfx Ac Nsgn

Condition: used, Cutting height: 85/40 mm Cutting length: max. 380 mm Cjdpfx Acswqphlo Negn Combined pull and table circular saw Graule AGT. The pull saw is tiltable and swiveling. The machine can also be used solely as a pull saw by removing the table.

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Cgedpsvxr S Rsfx Ac Nsn

Condition: new, Year of construction: 2025, The innovative circular saw is a combination of a powerful, precise, universal and compact device. It was created for small carpentry workshops, furniture manufacturers and craftsmen. This machine uses many solutions usually used in more expensive devices of this type. The excellent price-performance ratio has been achieved without compromising on quality or versatility. Machine description The TS 315 industrial circular saw for solid wood is an innovative combination of a powerful, precise, universal and compact machine! It was created for carpentry workshops, hobbyists, furniture manufacturers and craftsmen This machine uses many solutions used in much more expensive machines of this type! Excellent price-performance ratio has been achieved without compromising on quality or versatility! The machine is also used to process high-density boards, MDF boards, ABS panels, PVC, solid wood and other materials based on wood or with a similar structure and hardness. Cgjdjvxhm Depfx Ac Nen Smooth and precise adjustment of height and angle using a knob Stable, heavy, high-quality machine body. Broadening and extending the table allows for comfortable work. Smooth aluminum reinforced sliding table. Precision parallel stop with fine adjustment. Sturdy telescopic arm and extendable extension table Large drive motor guarantees consistent cutting speed, even at a cutting height of 100 mm Technical parameters Shield dimensions 315x30x3.2mm Dial rotation 4250rpm Max. cutting height 90/45 degrees 100/75mm Max. cutting width on the guide 940mm Workbench dimensions 800 x 365mm Table extension 760 x 600mm Expanding the table 500 x 350mm Sliding table 1600 x 238mm Suction port diameter 100mm Motor power 2.8kW Supply voltage 400V Weight 245 kg Machine dimensions 1540 x 2400 x 1300mm

Condition: new, Year of construction: 2025, This machine is a powerful, precise and universal device in a compact body, created for all workshops, furniture manufacturers and carpenters looking for a powerful machine. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Cgjdpfx Acevxhlgj Nsn Precise saw cutting and height adjustment through a knob Parallel guide with microadjustment Table ground, made of cast iron with expansion capability Stable, uniform table saw design, intended for any carpentry work Integrated side table provides great cutting capabilities Technical data Maximum saw diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 50 mm 90º maximum cutting depth 80 mm Worktable dimensions 350×800 mm Movable table dimensions 240×1320 mm S1 continuous work motor power 2.2 kW Power supply 400V Weight 180 kg Dimensions 1550×1900×820 mm

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Cgedpfx Aovxhkisc Non Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 230V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Cjdpfx Aevxhi Eoc Nogn Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 56 mm 90º maximum cutting depth 80 mm Movable table travel 620 mm Cutting width on the right side of the saw 610 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 230V Weight 125 kg Dimensions 1090×1330×910 mm Cgedjvxhhzspfx Ac Non Manufacturer: Cormak

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 56 mm 90º maximum cutting depth 80 mm Movable table travel 620 mm Cutting width on the right side of the saw 610 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 400V Cjdpfevxhhbjx Ac Njgn Weight 125 kg Dimensions 1090×1330×910 mm Manufacturer: Cormak

Condition: used, OMGA T421 IDC000097 Cgedpfou Dhupsx Ac Nen - saw blade diameter: 400 mm - complete with saw dust filter

Condition: good (used), functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 70 mm, saw blade diameter: 125 mm, total height: 1,300 mm, total length: 6,000 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, type of input current: three-phase, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 6,500 mm, input frequency: 50 Hz, main saw diameter: 350 mm, overall weight: 3,500 kg, rotational speed (max.): 3,800 rpm, cutting length (max.): 4,200 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, collet bore: 75 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, year of last overhaul: 2024, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of Cgjdpsuyvnisfx Ac Nsn with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable.

Condition: new, Year of construction: 2023, functionality: fully functional, cutting height (max.): 79 mm, saw blade diameter: 250 mm, cutting width at rip fence: 769 mm, total height: 7,900 mm, total length: 14,050 mm, total width: 15,500 mm, table width: 792 mm, table length: 508 mm, input voltage: 230 V, extraction connection diameter: 100 mm, overall weight: 120 kg, rotational speed (max.): 3,800 rpm, hole diameter of the disc: 30 mm, power: 1.45 kW (1.97 HP), The Fusion 1 model is an excellent solution for anyone looking for a compact but very accurate and high-quality saw to start with - Polished cast iron table. - Robust cast iron motor suspension. - Can be used with DADO circular saw blade set. - Two T-slot rails on both sides of the circular saw blade. - Quick and easy control and tilting of the cutting height. - Lever for quick exchange of circular blade. - Positionable main switch. - Quick attachment of the riving knife. Cgsdpfx Acetuurto Nsn - Additional rear table included in the price. - Sufficient power for longitudinal and cross cuts up to 79 mm in height. - Storage space for tools and rulers that are always to hand. - Type: Fusion 1 - Recommended area of application: Craftsman - Power (230 V): 1450 W - Recommended fuse switch: 13 A - Disc x clamping: 250 × 30 mm - Rotations: 3800 rotations/min. - Tilting of the disk: 0-45° - Max. Max. cutting height at 45°: 50 mm - Max. Cutting height at 90°: 79 mm - Max. Cutting width: 769 mm - Extraction: 100 mm - Cast iron table size: 508 mm × 792 mm - Overall table size: 1118 mm × 792 mm - T-slot rail dimensions: W × H 24.3 mm (19 mm), × 4.2 (10.7) - Dimensions: 1550 mm × 1405 mm × 1100 mm - Weight: 110 kg - Packaging size: - Cardboard box on its own pallet 1330 mm × 700 mm × 790 mm - Weight incl. packaging: 120 kg Scope of delivery - elongated ruler - Angled ruler - Gripper for small parts - Upper suction hood - Rear table extension - Carbide circular saw blade for universal use (diameter 250/30 mm, Z40 - Hose for suction The machine is delivered partially disassembled in a transport box. The set-up time is estimated at approx. 1 hour.

Condition: used, Rip saw - Saw for lengthening boards. - Manufacturer: omega T55 300 - Year: 1996 - Electric motor - Frequency counter Cedpfjtq Eblox Ac Njgn

Condition: used, Year of construction: 1981, functionality: fully functional, Connected load 380V 3.0kW 6.7A Weight approx. 300 kg Cutting width 900 mm Table extension own construction Sliding table Cgjdpoq Au N Esfx Ac Nsn Fixed 90° angle fence Saw blade guard PSV own construction Unit swivels to 45° manually Manual height adjustment Extraction socket 100 mm Rip fence missing Stop for ruler missing

Condition: new, Year of construction: 2026, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: Cedpfx Asmcaawec Negn • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing Cedpfxemcaaho Ac Negn • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor Cgedpfxemb U T Uj Ac Njn • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Cgjdpfxomb U T Rs Ac Nsn Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Cgsdpfx Aemb U T Hec Njn Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: reconditioned (used), Year of construction: 1993, multi-saw with moving saw linck masker saw with a movable saw floating on hydraulics Csdolwp Diopfx Ac Nsgn