drevodesignJM s.r.o.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 30282, control type: manual, punching force: 40 t, punching diameter: 32 mm, stroke rate (min.): 25 1/min, sheet thickness (max.): 10 mm, oil tank capacity: 50 l, overall weight: 1,400 kg, Equipment: CE marking, emergency stop, foot remote control, FICEP 401 Serial number 30282 Year of manufacture 2008 Ficep hydraulic single-punching machine Model 401 Punching force 40 tons / 400 kN Maximum standard thickness 10 mm (steel) Punching diameter 32 mm Maximum diameter for material thickness 32 mm x 10 mm Dsdpfx Aloz N Al Do Aeku Throat 510 mm Maximum punching speed (strokes per minute) 25 spm Maximum punching stroke 40 mm Oil tank capacity 50 liters Working height 950 mm Dimensions: L 695 mm x W 1410 mm x H 1610 mm Motor power 4 kW / 5.5 HP Machine weight 1.4 tons Safety systems The machine complies with CE directives Includes a selection of new punch and die sets for round holes.

Condition: excellent (used), HAAS Mini Mill 2 Vertical Machining Centre Year 2010 Serial number 1081104 Dsdpfxjz N Alws Al Aeku X axis travel 508 mm Y axis travel 406 mm Z axis travel 356 mm Table size 1,016 × 356 mm Maximum table load 227 kg Spindle nose to table 102–457 mm Maximum spindle speed 6,000 rpm Maximum spindle power 5.6 kW / 7.5 hp Spindle taper 40 taper — CT40 or BT40 to confirm Automatic tool changer 10 station

Condition: good (used), functionality: fully functional, mileage: 164,785 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, empty load weight: 2,356 kg, maximum load weight: 1,144 kg, first registration: 09/2026, next inspection (TÜV): 09/2028, loading space length: 3,350 mm, loading space width: 1,780 mm, loading space height: 1,950 mm, emission class: euro6, color: white, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, fuel: diesel, machine/vehicle number: MAPG210, Equipment: ABS, Bluetooth, USB port, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, navigation system, onboard computer, parking heater, power assisted steering, power mirror, sliding door, tire pressure monitoring, trailer coupling, truck registration, 9147 Solid paint, Arctic White MB 9147 A50 Front axle with increased load capacity AR3 Axle ratio I = 4.182 C6L Multifunction steering wheel CB8 Stabilization, Level II CL1 Steering wheel adjustable in inclination and height CW2 Deletion of vehicle lowering function D03 High roof D51 Partition, full-height with window E07 Hill start assist E1D Digital radio (DAB) E1E Navigation E1G Live Traffic Information E1U USB socket, 5 V E2N Control for Pro features in NTG6 E3M MBUX multimedia system with 7-inch touchscreen E43 Trailer socket, 13-pin ED4 AGM battery 12 V 92 Ah ES0 Jump start contact EW6 Pre-installation for Remote Services Plus EX9 3 years of free map data updates EY5 Mercedes-Benz emergency call system EY6 Breakdown management F3F Passenger-optimized gear selector console F49 Heated windshield F61 Interior mirror F68 Exterior mirrors, heated and electrically adjustable FR8 Rear view camera GD9 6-speed manual transmission, ECO Gear High Torque H12 Hot water auxiliary heater H21 Heat-insulating glass all around with band filter on the windshield HH9 Semi-automatic controlled climate control system Tempmatic HI1 Climate zone 1 (cold/comfort) IG4 Standard IG5 Basic IH6 Head unit ECE/ROW IK0 Complete vehicle IL1 Domestic market (Germany) IL5 Left-hand drive IR4 Wheelbase 3665 mm (code defining the base model) IT4 3.5-tonner J10 Speedometer, km/h J55 Seat belt warning system for passenger seat J58 Seat belt warning system for driver seat J65 Outside temperature display JA8 Crosswind assist JF1 Rain sensor JG0 Shift point indicator JI7 Service interval 60,000 km KB7 Main tank, 93 liters KL5 Fuel filter with water separator LA2 Headlamp assist LB1 Lateral marker lights LB5 3rd brake light Djdpfsz N Alqjx Al Aoku LC2 LED light strip in the cargo area LE1 Adaptive brake light LX5 Europe M40 Generator 14V/200A MG5 Engine OM642 DE 30 LA 140 kW (190 hp) MJ8 ECO start/stop function MP6 Engine version Euro VI MS1 Cruise control OB1 Adjustment of the climate control system Q11 Longitudinal member reinforcement QA7 Trailer coupling for increased trailer load, 3.5 t QA9 Step on the rear door when a trailer coupling is installed RR0 Tires, optimized for rolling resistance RS3 Steel wheels 6.5 J x 16 RX5 Wheel manufacturer Maxion Wheels S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S23 Passenger seat, double seat SA5 Airbag, driver SA6 Airbag, passenger SB1 Driver seat, comfort SK2 Seat occupancy recognition, driver seat T16 Sliding door, right T77 Grab handle, entry, cargo area sliding door at partition T86 Entry handle on rear corner pillar, right V94 Cable duct on side wall V95 Cable duct on rear portal VA7 Stowage compartment with net in rear doors VF7 Fabric Maturin, black W17 Window, front right, fixed in side wall/sliding door W54 Rear door, double-wing, 270 degrees W61 Window in tailgate/rear doors X30 Vehicle registration certificate, part 2 X99 Manufacturer Mercedes-Benz AG XC9 Certificate of Conformity (COC) documents XG7 Without increase/reduction in permitted weight to 3500 kg XM4 Acoustic package Z1N Approval N1 Z2E Country version EU-EFTA-UK Z4V Production location, Düsseldorf Z7K Fleet comfort package ZM0 Panel van

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 470 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 160 mm, About Us Dksdpfx Ajz N Alkjl Aeu Since 2014, we have been developing and producing our machines in Austria as a machine manufacturer. In addition to our standard machines, which can be individually customized, we are also able to offer special solutions. We will gladly send you our product catalog; simply contact us. Further information can be found at amt – machinetools . com Machine Frame ECO 532C CLEARANCE SALE – while supplies last Due to the further development of our machine series and the transition to the HSC 544, the remaining ECO 532 machine frames are being offered at an attractive clearance price. Travel range X 470mm (710mm with portal extension for tool changer) Y 330mm Z 160mm (longer travel range available upon request) Machine bed made of mineral cast - high rigidity - high vibration damping - high thermal stability - compact dimensions with a depth of approximately 660mm, allowing it to pass through very narrow doors during installation - weight approximately 400kg Guides and drive - Linear guides, size 20, on all axes - Ball screws with a diameter of 25mm on the X axis, diameter 20mm on the Y and Z axes Scope of delivery Machine frame including portal extension, fully assembled and calibrated. Includes: - Linear guides, ball screws and bearing units - Machine table - Z axis and cross plate The pictures show some optional accessories that are not included in the scope of delivery. For example, spindle, motors, guide rail covers, tool changer, cabin, etc. Numerous options and extensions are available. We will be happy to provide you with expert and comprehensive advice to offer you the perfect solution for your machining task. The offer does not include VAT. Delivery time and payment terms are subject to agreement.

Condition: new, mileage: 1 km, power: 228 kW (309.99 HP), fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 6,100 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 8, suspension: other, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, loading space length: 7,780 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, Year of construction: 2026, Equipment: tail-lift, Availability Stock status: Expected soon Technical Information Number of cylinders: 6 Engine displacement: 6,700 cc Transmission Transmission: ZF PowerLine, 8 gears, automatic Axle Configuration Dsdjz N Ak Hopfx Al Aeku Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 8000 kg; Tire tread depth left: 100%; Tire tread depth right: 100%; Suspension: Parabolic spring suspension Rear axle: Max. axle load: 13000 kg; Tire tread depth left: 100%; Tire tread depth right: 100%; Suspension: Air suspension Weights Unladen weight: 9,636 kg Payload: 9,364 kg GVW: 19,000 kg Functional Tail lift: Dhollandia DH/LM 2.0, rear flap, 2000 kg Body manufacturer: Veekemans Plywood Environmental Emission class: Euro 0 Condition Overall condition: very good Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: None

Condition: excellent (used), mileage: 408,900 km, power: 353 kW (479.95 HP), first registration: 09/2022, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,195 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, Year of construction: 2022, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking heater, power assisted steering, second fuel tank, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - Aluminum fuel tank - Roof spoiler - Lane departure warning system - Radio and audio system - Disc brakes - Sleeper cab - Speed limiter - Stability control - Auxiliary heater = Special features = XLRTEH4300G421484 = More information = Transmission: TRAXON, 12 gears, Automatic Brakes: disc brakes Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 60%; Tire tread depth right: 60%; Suspension: leaf spring Rear axle: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60%; Suspension: air suspension Number of cylinders: 6 Engine capacity: 12,902 cc Dkodpfxsz N Akto Al Aou Cargo space capacity: 1,195 l Technical condition: very good Optical condition: very good

Condition: excellent (used), Year of construction: 2022, Refrigeration dryer OMEGA Capacity 9.5 m3/min year of manufacture 2019 Dedsz N Akmepfx Al Ajku THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Keyence VL-500” 3D co-ordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features incl. software incl. VL-H2P add-on software incl. VL-H2G add-on software incl. laptop for operation incl. calibration plate Ready for immediate use Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: Djdsz N Akgjpfx Al Ajku You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), machine/vehicle number: 17469, Year of construction: 2013, load capacity: 1,400 kg, lifting height: 4,802 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,006 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,539 kg, enginetype: Electric, manufacturer: Linde Serial Number: W4X372D04080 Dsdpfsz N Akaox Al Aeku Battery Details: 24V 3PzS 375Ah (aus 2021)

Condition: excellent (used), Year of construction: 2011, Serial number: 01335 Year of manufacture: 2011 Number of axles: 6 Maximum load capacity: 3 kg Weight: 27 kg Dsdoz N Ai Aepfx Al Ajku

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-Recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robustly built and, thanks to the generous manual coating opening, is ideally suited for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For enamel powder: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: Djdpfx Aljz N Aivj Ajku • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is drawn downwards The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be directly reprocessed and reused in the cycle (enormous material savings!) • Cleaning unit: Unit mounted on top, including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire suppression system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important collection & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500 net (plus VAT). "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 17376, Year of construction: 2022, operating hours: 55 h, load capacity: 2,000 kg, lifting height: 4,476 mm, free lift: 1,560 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,646 kg, enginetype: Electric, manufacturer: Linde Serial Number: P21173L06436 Dkjdpfxoz N Aiie Al Aju Battery Details: 24V 3PzS 375Ah BJ: 2022

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, STC-Ref: G-022-7733 Heidelberg GTO-46 ,Year: 1984, Impressions: approx. 62 Mio. format: 330x460 mm ,1 colors equipped: - Minus-version - conventional dampening system - powder sprayer --> available: 11/2026 Dodsz N Aicopfx Al Ajku

Condition: excellent (used), Year of construction: 2023, volume flow: 1.06 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, pressure: 10 bar, SCC SMART 7 screw compressor 7.5 kW motor Capacity: 1.06 m³/min Pressure: 10 bar Year of manufacture: 2023 Dkjdpfx Aoz N Ah Esl Aeu Operating hours: 902 Compressor has been serviced, with filters and oil changed.

Condition: used, Machine description Used continuous finishing line for steel plates and strips, consisting of 15 stations in line. Entry section: DIMECO chuck-expandable mandrel decoiler, straightener with roller, welder, drive group and accumulation table. Surface preparation: FISHER shot blaster in line with dust extractor and suspended shear-brush. Dimensioning: cold rolling cage in dry (duo), continuously tensioned straightener and Zumbach USYS laser measurement. Outlet section: pneumatic shear, saw for length, receiving conveyor for bars and dedicated winding for the product. Schneider Electric Magelis control panel with bar and crown modes. Capacities, year and installed power: not disclosed. Machine operation This line decarburization, cold rolling and calibrating line converts hot-rolled strip or sheet coils into shot-blasted, rolled, straightened and inspected products, delivered in cut-to-length bars or in coils. It is intended for steel plants, flat wire and strip producers, manufacturers of springs, blades and parts cutouts, as well as flat products finishing centers. Features / Strengths Complete finishing line, from unwinding to packaging, with mechanical decarbonization by shot blasting without chemical decarburization. The components come from still-active manufacturers (DIMECO, Zumbach, Schneider Electric), which facilitates parts supply. Production in bar or coil on the same line. A second identical configuration line can be taken in pair. Sold as is, dismantling at buyer's expense, available from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Dksdpfxez N Ahxs Al Asu Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, pressing force: 56 t, stroke length: 200 mm, overall weight: 4,500 kg, working width: 2,200 mm, distance between stands: 2,000 mm, Boschert Profi 56-2200 CNC Year of manufacture: 2014 Cybelec DNC15 control system with color graphics Technical data: Press force: 56 tons Bending length: 2200 mm Distance between side walls: 200-180 mm Rear stop 1 + 2 (X-axis): 365 mm / 500 mm Table height / working height: 920 mm Dkodpfjz N Ahfex Al Asu Max. installation height: 400 mm Stroke: 200 mm Working speed: 10 mm/sec Retraction speed: 45 mm/sec Repeatability: +/- 0.02 Intermediate pieces Int100 with quick clamping Adjustable front supports Amada tool system incl. many tools

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper drill for sale (like new). Dedpfoz N Ag Iox Al Asku Type 290, 2 heads with sliding table, 230 volts. Powerful motor. User-friendly.

Condition: good (used), machine/vehicle number: 17369, Year of construction: 2020, operating hours: 2,995 h, load capacity: 1,000 kg, lifting height: 3,165 mm, load center: 500 mm, fuel type: electric, mast type: simplex, construction height: 2,260 mm, battery voltage: 24 V, fork length: 1,100 mm, overall weight: 1,923 kg, enginetype: Electric, manufacturer: Linde Serial Number: 615212X00186 Dkodpfx Asz N Agbsl Asu Battery Details: 24V 4HpzS 620Ah BJ: 2020

Condition: good (used), PRO-PEN marking machine, a stationary needle embossing device, and a portable device for on-site engraving. Dkodoz N Af Rjpfx Al Aeu These devices are used to permanently mark workpieces with serial numbers, text, or identification markings: a needle strikes many small dots into the surface. Beneath the turquoise housing is the holder where a workpiece or nameplate can be secured. The marking head above it embosses text and numbers into the surface. We sell both devices together.

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 524 497, Heidelberg SORM Dsdpjz N Admofx Al Asku 1 Color Sheet-Fed Offset Press Year 1988 - Serial-No. 524 497 Size max. 520 x 740mm Impressions 102.984.943 Available Immediately

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, The machine is in very good condition, runs quietly, and operates with precision. TECHNICAL DETAILS Travel X-axis: 830 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rapid traverse: 30,000 m/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Control: Heidenhain 530 (MC422) Tool holder: SK 40 Weight: approx. 9,000 kg Spindle hours: approx. 17,500 EQUIPMENT Dedpfx Asz N Adgsl Aoku Internal coolant supply (IKZ) Chip conveyor Electronic handwheel Blum laser Flushing unit Filtration system Note: The probing system is not included in the scope of delivery.

Condition: good (used), functionality: fully functional, power: 55.4 kW (75.32 HP), operation weight: 4,355 kg, maximum load weight: 2,760 kg, Year of construction: 2021, operating hours: 816 h, machine/vehicle number: WNCD2401EPAL00531, DUAL VIEW Cab Rear-view camera Dkodpfx Ajz N Aazol Aju 360-degree LED warning light Tires: Mitas 405/70-20 MPT-01 Tilt-and-dump body Max. payload: 2,760 kg Operating weight: 4,355 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 11,600 h, functionality: fully functional, spindle bore: 107 mm, spindle speed (max.): 4,000 rpm, overall weight: 10,000 kg, controller model: Siemens 810D, Equipment: chip conveyor, TECHNICAL DETAILS Maximum swing diameter: 680 mm Swing diameter over X-guide: 565 mm Longitudinal travel: 1,300 mm Cross travel: 315 mm Spindle head: h5 Spindle diameter at front bearing: 150 mm Spindle bore: 107 mm Maximum torque: 600 Nm Djdpsz N Aaujfx Al Aoku Spindle speed: 4,000 rpm Chuck diameter: 315 mm Rapid traverse X-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool turret for: 12 tools Driven tools: 12 Tool holder: VDI 40 Quill stroke: 120 mm Quill taper: MK 5 MACHINE DETAILS Control system: Siemens 810D Dimensions & Weight Machine dimensions with chip conveyor (L x W x H): 5,700 x 2,600 x 2,210 mm Machine weight: approx. 10,000 kg Operating Hours Power-on hours: 47,781 h Spindle hours: 11,600 h EQUIPMENT Hydraulic steady rest, clamping range 30-245 mm Chip conveyor KNCS-N 315-91 power chuck

Condition: excellent (used), Year of construction: 2008, volume flow: 2.61 m³/h, pressure (min.): 11 bar, KAESER ASD 32 screw compressor Dksdpfsz Nz Uqjx Al Aeu Motor: 18.5 kW Capacity: 2.61 m³/min Pressure: 11 bar COMPRESSOR IN FULLY OPERATIONAL CONDITION.

Condition: used, mileage: 132,000 km, power: 140 kW (190.35 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 7,550 mm, total width: 2,520 mm, total height: 3,500 mm, loading space length: 5,200 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, traction control, Year of manufacture: 2023 Front axle: Steering; Tyre profile left: 25%; Tyre profile right: 25% Rear axle: Double wheels; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Empty weight: 5.753 kg Carrying capacity: 1.737 kg GVW: 7.490 kg Tail lift: DHollandia , 1500 kg APK (MOT): tested until 06/2027 = Additional options and accessories = - Binding rails 2 x - Camera system - Heavy duty engine brake - LED- lighting - Line assist Dkjdpfx Alez Nz Uks Asu - Outside temperature display - Rear air suspension - Refrigerator - Reversing camera - Roof spoiler - Side door - Sleeper cab - Visor