S.F.M. Dienstleistungen GbR

Condition: used, Year of construction: 2002, Weiler E90 / 4.5M - CNC Lathe with Cycle Automation - Weiler D2 cycle control - Chip conveyor - Approx. 15 pcs. Multifix quick-change toolholders Hjdpfxoxn Rr Ro Afisfn - 1 live centre - Regular servicing by Weiler - Supplied without chuck, without steadies - Year of manufacture: 2002 Technical Data Working Area: - Distance between centres: 4500 mm - Centre height: 450 mm - Swing diameter over bed: 900 mm - Swing diameter over cross slide: 530 mm - Bed width: 600 mm - Travel of cross slide: 590 mm - Travel of top slide: 250 mm - Cross slide length: 1230 mm - Cross slide width: 345 mm - Saddle guideway length: 860 mm - Tool shank cross-section (height/width): 40 x 40 mm Spindle: - Spindle nose according to DIN 55027 / 55026 size: 11 - Spindle diameter in front bearing: 178 mm - Spindle bore: 128 mm - Main spindle internal taper, metric: 140 mm Main Drive: - Spindle nose according to DIN 55027 size: 11 - Total speed range: 1 - 1120 rpm - Speed range gear stage I: 1 - 350 rpm - Speed range gear stage II: 4 - 1120 rpm - Drive power at 60%/100% duty cycle: 45 / 37 kW - Max. torque at spindle: 6000 Nm Feed Drive: - Feed range Z/X: 0 - 20 mm/rev - Feed force Z/X: 20 kN - Rapid traverse speed Z/X: 7 / 3.5 m/min Tailstock: - Quill diameter: 140 mm - Quill stroke: 300 mm - Quill internal taper: MK 6 Thread Cutting Range: - Metric threads: 0.1 - 400 mm - Inch threads: 1/4 - 56 TPI - Module threads: 0.125 - 28 mm - DP threads: 1 - 224 DP Connection Data: - Operating voltage: 400 V - Control voltage: 24 / 230 V - Connected load: 55 kW - Rated current: 85 A Machine Dimensions: - Total length: 6900 mm - Total width: 2600 mm - Total height: 2120 mm - Machine weight: 10,500 kg

Condition: used, Seiger SLZ 700E Lathe CNC Cycle Lathe Manufacturer: SEIGER-LÖW - Model: SLZ-700/2000 CNC Control: SIEMENS SINUMERIK 810D Used / Year of manufacture: 2005 Seiger Machine Number: 4304 Working Area: Max. turning length: 2,000 mm Max. swing diameter over bed: 730 mm, in 3-jaw chuck up to max. 450 mm Max. swing diameter over cross slide: 450 mm Bed width: 480 mm Hsdpfx Afsxnixcoiefn Tool cross-section: 32 x 25 mm Permissible workpiece weights: ■ Between centers without steady rest: 2,000 kg ■ With one steady rest: 2,200 kg ■ With two steady rests: 2,500 kg ■ Overhung in faceplate: 750 kg X-axis (cross slide) specifications: ■ Max. travel: 400 mm ■ Feed force: 14 kN ■ Speed: 4 m/min Z-axis (bed carriage) specifications: ■ Max. travel: 400 mm ■ Feed force: 18 kN ■ Speed: 7 m/min Technical Data: ■ Drive/connected load: 22/28 kW ■ Total speed range: 1 - 2,200 rpm ■ Max. spindle torque: approx. 2,200 Nm ■ Spindle nose according to DIN 55027: Size 11 ■ Spindle bore diameter: 130 mm ■ Spindle diameter in front bearing: 170 mm ■ Spindle taper: 1:20 Taper in the quill sleeve: MT 6 ■ Center height: 365 mm ■ Distance between centers: 2,000 mm ■ Chip conveyor SLZ 800 x 2000 ■ Discharge height: 1,100 mm ■ Discharge length: 535 mm Tailstock: ■ Quill diameter: 115 mm ■ Quill stroke: 225 mm ■ Quill taper bore: MT 6 Equipment: ■ Tool changer: PARAT 4-position quick-change holder / currently 40 holders ■ Steady rest + 3 short inserts ■ Heavy duty cabinet ■ Drill chuck mount ■ Turning jaws ■ Holders ■ Tool holders ■ Rack ■ Tool cabinet ■ 1 live center ■ 2 sleeves ■ Extraction fan ■ Chuck: Röhrn, diameter 400 mm ■ Faceplate ■ Software for contour programming and electronic handwheel ■ Rear chip conveyor (extended special version, left discharge at headstock) Dimensions and Weight: ■ Length: 2,500 mm ■ Width: 2,000 mm ■ Height: 2,000 mm ■ Weight: 6,200 kg Please note: The guideways and carriage on the machine are worn. These documents make no claim to completeness or accuracy. No warranties of characteristics are given based on the information contained herein.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 520 mm, turning length: 3,000 mm, turning diameter: 800 mm, Manufacturer: Monforts Model: KNC 8 3000 Year of manufacture: 2000 (completely overhauled in 2018) Control: Siemens Technical data Centre distance: 2965 mm Swing diameter over bed: 800 mm Hodpjxdlthefx Afisfn Swing diameter over cross slide: 520 mm Cross slide travel: 400 mm Bed width: 550 mm Spindle mount according to DIN55027, size 11 Main drive: infinitely variable Max. torque: 6250 Nm Machine dimensions: 5200 x 2110 x 1890 mm Weight approx.: 6500 kg

Condition: used, Year of construction: 2008, Technical details: turning diameter: 720 mm turning length: 3000 mm control: 3 Swing diameter over face slide: 430 mm Displacement via cross slide: 410 mm Hfedpfx Afsxdcb Noien bed width: 480 mm spindle head: nach DIN 55027 Gr. 11 spindle diameter in front bearing: 150 mm spindle bore: 106 mm speeds:: 1-1800 1/min diameter of quill: 115 mm quill stroke: 225 mm Inner cone of the quill: MK 6 total power requirement: 37/30 kW dimensions of the machine ca.: 5000 x 2500 x 1950 mm weight of the machine ca.: 6,1 t

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 415 mm, spindle bore: 155 mm, turning length: 1,000 mm, turning diameter: 620 mm, Pinacho Smart Turn 5/310-155 x 1000mm lathe with Fanuc semi-control Description Hfjdpsxcgp Isfx Afisn Manufacturer: Pinacho Model: Smart Turn 5/310-155 Machine type: Semi-controlled CNC lathe Capacities and dimensions: Distance between centers: 1000 mm Spindle bore: 155 mm Swing over bed: 620 mm Swing over cross slide: 415 mm Double chuck: Ø 375 mm Speeds and feeds: Three speed ranges: 0 – 80 rpm 80 – 260 rpm 260 – 780 rpm Working feeds: 0 – 10000 mm/min Included components: Fanuc semi-control Quick-change turret Double chuck Ø375 mm Power and weight: Motor power: 11 kW Year of manufacture: 2006 Condition: In very good condition

Condition: used, Year of construction: 2002, turning diameter 570 mm turning length 3340 mm control SIN 810 D turning diameter over slide rest 345 mm spindle head DIN 55027 - Size 8 spindle bore 62 mm tailstock quill taper MT 5 spindle turning speed range 3 - 2.500 U/min total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 7,50 x 2,10 x 2,00 m Hjdpjxb Ecqefx Afiofn 4-station turret SAUTER with various cartridges 3-jaw Schunk SCHUNK ROTA-S plus 2.0 Ø315-92 Tailstock Drill rod bore 100mm Fixed steady rest Ø315mm Chip conveyor bmf Bürener (new in 2025) with coolant pump Machine light

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Hsdpfjw Updgsx Afiofn Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: new, Year of construction: 2025, turning length: 2,000 mm, turning diameter: 660 mm, center width: 2,000 mm, CNC Cycle Lathe FTL660-2000 – Heavy-Duty Machining with Precision The FTL660-2000 from the FLASH series by GreMaT is a powerful CNC cycle lathe specifically designed for heavy-duty cutting applications. Featuring a 500 mm wide machine base, a solid monoblock cast bed, and flexible spindle options, it delivers maximum stability and precision for the most demanding turning operations. Combined with the Siemens 828D control, the machine stands out for its ease of operation, short setup times, and high process reliability—ideal for manufacturing companies that prioritize productivity and dependability. FTL660-2000 Highlights • Immediately available – secure your machine directly from stock (otherwise approx. 6 months delivery time). • Robust & massive – 500 mm wide machine bed and monoblock construction for maximum rigidity. • High flexibility – spindle bores up to Ø120 mm, various speed ranges. • Heavy-duty linear guides – stable and durable even with large workpieces. • Centrally mounted ball screw – higher precision, reduced wear. • Versatile tooling concept – 4-station tool post, 8-station turret, or gang tooling. Key Technical Data (Excerpt) • Max. swing over bed: Ø700 mm • Max. swing over cross slide: Ø480 mm • Max. workpiece length: 2000–3000 mm (depending on configuration) • Spindle bore: Ø120 mm • Bar capacity: Ø110 / Ø135 / Ø162 mm • Spindle nose: A2-11 • Spindle speed: 1000 / *800 rpm • Spindle motor: 15 / *18.5 kW • Tool positions: 4+2, *8+2 • Tailstock: manual or hydraulic, travel 100 mm • Bed width: 500 mm • Weight: approx. 7,600 kg Equipment includes: • Siemens 828D control + CTB driver + CTB motor • 15'' display, ShopTurn function • Taiwan linear guide + ball screw • A2-11 belt-driven spindle, max. speed: 1000 rpm • Spindle bore: φ120 mm, through hole: φ110 mm • Main servo motor with 22/30 kW • 15-inch Taiwanese hydraulic hollow chuck + hollow cylinder • 12-station servo turret, 100 mm center height • MT5 hydraulic tailstock • Manual steady rest (circular) • Air-conditioned electrical cabinet • Electronic handwheel • Automatic lubrication system • Automatic coolant system • Three-color warning light • Work light • USB and Ethernet connectivity • Foundation pads • Tools and toolbox • CE certificate Experience it live at EMO 2025! Hodpfx Afow T Ttvsiefn See the CNC cycle lathe FTL660-2000 live at EMO 2025. Experience its robustness, precision, and performance first-hand—and secure your production edge. 👉 Get your free EMO tickets now and schedule a personal appointment! Why choose the FTL660-2000? ✅ CNC cycle lathe with high machining capacity ✅ Immediately available—or approx. 6 months lead time for new orders ✅ Siemens 828D control for intuitive operation ✅ Ideal for heavy-duty machining of large workpieces ✅ Solid cast machine bed with integrated recirculating ball screw for increased rigidity and stability

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Lead- and feed-screw/roller lathe Hfsdjw Tdmyspfx Afisn Make: MONFORTS, Model: KNC 8S 4000 Year: 1998 SN: 08122394 with MONFORTS CONTROL SYSTEM type MTCK R+D, monitor, chip conveyor, 3-jaw chuck, steady rest, Multifix tool holder, turning length 3000 mm

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm Hfodpfx Aew Syd Sefien weight of the machine ca. 3,6 t

Condition: used, Year of construction: 1998, turning length 2000 mm 980507 x-axis 7000 mm Hfjdpfxsw Syb Ds Afion z-axis 10000 mm 65 mm total power requirement 15 kW weight of the machine ca. 3,5 t

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Hfedpfx Afsw Sm U Djijn Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: used, Year of construction: 1999, turning length 2000 mm greates pass round over bed 630 mm swing diameter over slide rest 350 mm control Monforts Control System K bed width 550 mm turning speed range 2 - 1800 U/min spindle diameter in front bearing 120 mm Hedpfx Aow E Nmqjfiefn spindle head DIN 55027 - Size 8 tool taper RD2 PARAT quill stroke 210 mm spindle bore 71 mm total power requirement 30 kW weight of the machine ca. 5 t dimensions of the machine ca. 4,90 x 2,10 x 2,00 m Three-jaw chuck / key bar / Ø250mm Four-jaw chuck 3-jaw chuck for tailstock 4-station tool post head PARAT Fixed steady rest, Ø small Fixed steady rest, Ø large Various chuck jaws, live centers, live centers, tool holders Chip conveyor with coolant pump

Condition: used, Year of construction: 2002, turning diameter 820 mm turning length 2.000 mm control SIN 810 D center height over square guideway 400 mm turning diameter over slide rest 500 mm x-travel 540 mm Hsdpfxew Dvipo Afiofn z-travel 2.100 mm feed x/z-axis 0,01 - 50 mm/min rapid traverse X-axis 5,00 m/min rapid traverse Z-axis 10,00 m/min feeding force facing 12.500 N power feed longitudinal 20.000 N spindle turning speed range 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1 6,40 - 376 1/min. spindle turning speed - gearbox stage 2 27,40 - 1.600 1/min. power capacity at 60% / 100 % load 46,00 / 37,00 KW max. torque at 60% / 100% load 5.073 / 4.069 Nm constant cutting rate 1 - 9.999 m/min. spindle head DIN 55027 - Size 11 spindle diameter in front bearing 170 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 125 mm quill stroke 280 mm thread pitch 0,1 - 400 mm total power requirement 35,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 6,00 x 3,00 x H2,60 m SIEMENS Sinumerik 810D mcontrol, chip-conveyor, tail stock, dust exhauster, 2 pc. steady rest. Machine can be inspected under power.

Condition: used, Year of construction: 2007, turning diameter 0500 mm turning length 1500 mm control 802 C turning dia. over face-slide 280 mm spindle bore 82 mm spindle turning speed range 20- 3000 U/min feeds - longitudinal 0- 5000 mm/min feeds - cross 0- 5000 min rapid traverse longitudinal 5 m/min Hfodpfx Afjw A Spisijn rapid traverse cross 5 m/min main drive 7,5 kW travel -z axis 1435 mm travel -x axis 295 mm quill stroke 150 mm bed width 350 mm weight of the machine ca. 3 t dimensions of the machine ca. 3,23 x 1,47 x 1,73 m Cycle control Siemens 802 C

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Hjdpfx Ajwwt Trofiofn Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Condition: used, Year of construction: 1994, Technical details: turning diameter: 570 mm turning length: 1000 mm dimensions of the machine ca.: 3,25 x 2,03 x 1,95 m Tool disc turret for 8 tools with VDI 30. Not for power tools machine manual, technical documentation; Accessories: 3-jaw chuck, various tool holders Video is available * Hodpfx Aowwluzsfisfn

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment Hfjdpfx Afowwlt Reien *

Condition: used, total height: 2,500 mm, total length: 5,000 mm, total width: 2,200 mm, Empty weight: 5.500 kg Price: On request - Drive system: Teach-in - Control system brand: Fagor - Control system type: 8055 - Power [kW]: 15.0 - Centre height [mm]: 350 - Swing over bed [mm]: 700 - Carriage turning diameter [mm]: 425 - Distance between centres [mm]: 2000 Hfsdpfjwnhm Iox Afisn - Bed width [mm]: 450 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 310 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout, Removable bed - Type of digital readout: Heidenhain Manualplus - Documentation available: Yes - CE marking present: Yes - Serial number: 12598 - Control: CNC - Transport dimensions: 5000mm x 2200mm x 2500mm (l x w x h) - Transport weight [kg]: 5500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Hfsdpfxswmlknj Afisn Three-jaw chuck D=500mm without clamping jaws Various accessories *

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 75740 € 1431.49 € 600 mm 1500 mm 300 mm 80 mm 400 mm 400 mm 8 90 M 3 20 - 100, 80 - 400, 400 - U/Min Hjdpfjwirn Sex Afiefn max. 8 m/min max. 8 m/min 290 mm 90 mm 5 MK 225 mm 11 kW 3,5 / 22 kW/Nm 1,75 / 11 kW/Nm 120 Nm 1250 daN 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 74 340,00 mm € 77 240,00 mm € 80 240,00 mm € 83 340,00 mm € 86 340,00

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing over slide 700 mm Spindle bore 128 mm Spindle speeds 6.4-1'600 rpm SIEMENS 810 D control Hjdpewhkdcefx Afiofn Misc. accessories MARCELS MASCHINEN CH

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules Hfjdpfswgbuiex Afien - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: used, Year of construction: 2007, operating hours: 41,000 h, spindle bore: 165 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 1,200 mm, quill stroke: 400 mm, quill diameter: 140 mm, torque: 8,000 Nm, Technical Specifications ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle head DIN 55027 Gr 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Gear ratios: 2 Hedpfxjv Nhxzs Afijfn Torque: 8,000 Nm Number of turrets: 1 Sauter 4-station head turret for 140 mm chucks Tailstock Quill diameter: 140 mm Quill stroke: 400 Features ----- Electronic handwheel Forkardt 3KS 800 mm hydraulic power chuck Chip conveyor

Condition: used, Year of construction: 2007, turning diameter 0430 mm turning length 1000 mm control 21i-TB Fanuc turning dia. over face-slide 204 mm spindle bore 53 mm spindle turning speed range 20- 3000 U/min feeds - longitudinal 0- 5000 mm/min feeds - cross 0- 1000 mm/min rapid traverse longitudinal 7 m/min rapid traverse cross 1 m/min main drive 7,5 kW travel -z axis 1000 mm travel -x axis 230 mm quill stroke 120 mm Hfsdev Ankwepfx Afion bed width 300 mm weight of the machine ca. 2,85 t dimensions of the machine ca. 2,8 x 1,47 x 1,73 m Cycle control Fanuc 21i-TB.