Gmach GmbH

Year of construction: 2022, condition: like new (used), functionality: fully functional, In perfect condition Ijdpsxn Hcfofx Afijih

Condition: new, functionality: fully functional, warranty duration: 6 months, New log carriage, 17° inclined Log length: 2 – 5 m Diameter: 200 – 1000 mm Iiodpfexl Thcjx Afish Clamping dogs: 3 units Clamping dog opening: 1000 mm Longitudinal adjustment: 1 dog adjustable – 2 dogs fixed Clamping jaw opening: 900 mm Clamping dog adjustment: servo-electric Cable drive: 45 kW

Condition: used, Year of construction: 2015, functionality: fully functional, Complete Fully Functional USTUNKARLI Sawmill. With Conveyors included. Price also includes installation in anywhere in Europe. Iodpfxoxl Aaho Afisih

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!! Iodexlif Rspfx Afisih

Condition: used, functionality: fully functional, machine/vehicle number: RR400, type of input current: AC, The machine was refurbished and then used for four years in single-shift operation. It is fully functional but no longer in use due to the installation of a new log handling line. The machine is surplus to our needs, but it can be seen in operation upon request. Iiodpjxiwmdefx Afijh

Condition: excellent (used), Catalogue number 7756 TECHNICAL DATA - max. saw blade diameter: 400 mm - blade guard - blade bore diameter: 30 mm - max. diameter of workpiece with 400 mm blade: 130 mm Iiedpexhcrpofx Afijh - motor approx. 5.5 kW - feed motor: 1.1 kW - 3 feed rates + forward/reverse - dimensions (L/W/H): 1500x1300x1300 mm - weight: 530 kg ADVANTAGES – suitable for palisade production – with sharpening unit – easy to operate – compact size – used saw, very good condition Net price: 8,900 PLN Net price: 2,090 EUR based on 4.25 EUR rate (Prices may change with significant fluctuations)

Condition: used, Double edger / Edger line / Multi-blade circular saw Wurster & Dietz LB 12 0-line left Right-hand machine (adjustable saw blade right) max. pass-through height: 100 mm max. pass-through width: 65 mm with 5-strand cross conveyor as feed with 2 crosscut saws with roller infeed table Iodoxhbxnjpfx Afijih with laser with lath head with chip separator with spiral roller conveyor (length: 9 meters) with discharge table (cross conveyor 5-strand) (length: 5.2 m, width: 2.2 m) Location: Austria, near Ried im Innkreis

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Iisdpfx Aoxfrmwefish Minimum log length: 2.4 m Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Chip length: 20-30 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 160 m/min, controller manufacturer: Mircotec, workpiece length (max.): 5,500 mm, workpiece width (max.): 700 mm, workpiece height (max.): 100 mm, spindle motor power: 90,000 W, rotational speed (max.): 3,100 rpm, Automatic edging line BFB woodworking machines with Mircotec control. Year of manufacture 2004/2021. Maximum edging width 700mm, maximum edging thickness 100mm, 90kW drive motor. 4 adjustable saws. Included are cross conveyor in the basement, steep conveyor, cross-cut table, measuring/alignment, edger, splitter wedge, and board sorting. The line is fully functional and in good condition. Overhauled in 2021. Ijdpfx Ajxfb Ecefisih

Condition: used, Üstünkarli cross-cut saw, used. Parallel board edger Hydraulic adjustment Adjustable bushing, slat bushing Roller table with control lever, Iisdpoxd U Afefx Afijh cross conveyor and material chute Infeed rollers, control panel Type UDKY Lascmsw Rlmioxgtzrjg Cutting height ≈120 mm Cutting width ≈800 mm Blade diameter Ø 350-400 mm

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: - Maximum cutting length: 6050 mm - Minimum cutting length: 585 mm - Cutting height: 120 mm - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 - Cutting unit power: 4x 3 kW Isdpfx Afoxdxv Njioih - Feed motor power: 1.1 kW - Material feed via chains - Feed speed adjustable with gear motor

Year of construction: 2000, condition: good (used), EWD Combimes edging line. Year of manufacture: 2000, type DK90-TL. Timber feed from the left. Maximum edging width 500 mm, maximum edging thickness 120 mm. 90 kW drive motor. Cycle rate with 4.0 m wood length approx. 18 pieces/min. Complete with original EWD control system. Delivery from the accumulation conveyor before singling through to the sliver separator included. The line is complete and in good condition. Iodpoxcwvxofx Afieih

Year of construction: 1999, condition: refurbished (used), USNR Euromill trim saw, year of manufacture 1999. Sawing and profiling in one machine! Machine completely overhauled, new saw arbors installed. Maximum cutting height: 175 mm. Maximum cutting width: 200 mm (minimum 50 mm x 50 mm). Drive power: 2 x 110 kW. Complete with USNR infeed system and hydraulic unit. Various tools, saw blades, cutters, and spacer rings included. Iisdpsxcp E Ejfx Afijh

Year of construction: 1995, condition: refurbished (used), Trimming saw – edging saw MEM Cobra Year of manufacture: approx. 1995 Max. cutting height: 120 mm, max. pass-through width: 1,070 mm. 4 variable axes. 2 x 55 kW saw drive power. Completely overhauled machine! System immediately available for takeover! Iisdpfx Ajxcp A Defish

Year of construction: 1993, condition: used, functionality: fully functional, Complete Möhringer MN 180/200 resaw line. Cutting height 180 mm. 4 adjustable saws. With infeed/outfeed. Used. Already dismantled. Good condition. Sale on behalf of customer. Isdoxcidnjpfx Afijih

Condition: good (used), Belt separator LINCK SE with extraction unit type AVS. Very good condition after complete refurbishment! Length 7.0 m Iodjxcbdgspfx Afijih

Year of construction: 2010, condition: like new (used), functionality: fully functional, As-new EWD bandsaw stand, tiltable by 17° (can be used both as a block bandsaw and as a resaw!). Corresponds to the current model!! Roller diameter 1800 mm. In absolutely as-new condition, year of manufacture 2010. 90 kW drive power, with adjustable band guide. Includes hydraulic system and control panel. Complete documentation available. Ijdpfx Asxcbb Eofioih

Year of construction: 1997, condition: good (used), LINCK V 18 edger. LINCK V 18 edger including take-off unit. Machine in good condition including 2 x 85 kW drive motors (original LINCK!) and 2 x 2.2 kW drive power for take-off. Year of manufacture 1997, long knife discs for feed up to max. 75 m/min, max. cutting depth 110 mm. Weight 5,300 kg. Isdpfxoxca Hme Afijih

Condition: new, Year of construction: 2025, Band Resaw STENNER ST100R - Wheel diameter: 915 mm - Possible saw blade widths: up to 100 mm - Pneumatic infeed and outfeed movement of feed rollers Ijdsxbqqgopfx Afisih activated by a photocell - Selector switch to enable/disable the photocell - Handwheel adjustment of the position of the inner feed rollers - 18 kW main motor with automatic star/delta switch, braking system, and two emergency stop buttons - Fence system with tilting capability - Includes rubber-coated feed roller - Includes prism feed roller for diagonal cutting of square timber

Year of construction: 2013, condition: excellent (used), HewSaw Veisto CRS 250, rip saw in good condition, complete with control cabinet Isdpfsxbic Ijx Afioih

Condition: used, 2 x 11 kW saw motor Iedpfx Aoxbhncofisih

Condition: used, functionality: fully functional, We have a used Ahlström edger available for sale. It is in full working condition and comes complete with a set of blades/cutters. Iisdpfx Aoxa Akpsfijh

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, DROZDOWSKI PRP 58 FRAME SAW complete with accessories: - Chain cross conveyor - Chain longitudinal conveyor - Hydraulic system - Roller outfeed table - Saw blade sharpener - Set saw set tool Machine underwent a complete overhaul at the manufacturer's facility – perfect condition. Technical Specifications: Horizontal frame clearance: 580 mm Vertical clearance between rollers: 350 mm Saw frame stroke: 300 mm Main shaft speed: 330 rpm Feed rate: 0.5 - 2.5 m/min Blade dimensions (L x W x thickness): 815 x 70 x 1.6 mm Maximum number of blades: 12 pcs Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Iisdjxawddepfx Afioh Minimum length of log to be sawn: 1.8 m Minimum board thickness (standard): 13 mm (9 mm with single blade setup) Log cutting height above ground: 880 mm Track height above ground: 600 mm Roller pressure: hydraulic Overall dimensions of saw: 1.20 x 1.70 x 2.10 m (H) Total length of line with track: 10.00 m Weight with standard equipment: 3500 kg

Condition: good (used), Year of construction: 1994, - quantity of knives 4 Iodpfxow U Diwe Afioih - lenght of knives 720 mm - diameter of drum 900 mm

Condition: good (used), overall weight: 580 kg, Equipment: documentation/manual, About the item WALTER FD2/250 – Double Saw Formatting Machine Wide chain spacing (cutting width from 116 cm to 130 cm) Comes with technical documentation (DTR). Two new 400 mm saw blades included for free. GOOD CONDITION Iodpfjw Ucwajx Afijih NET PRICE