DF Druckluft-Fachhandel GmbH

Condition: used, Year of construction: 2015, operating hours: 35,891 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 414 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, Atlas Copco GA37VSD+ screw compressor Inverter integrated 37 kW Bsdpj Ahqmwjfx Aknsdi 13 bar 6.90 m3/min Year of manufacture: 2015 Operating hours: 35,891

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Installation in a special container: - Weather-protected outdoor installation directly on the company premises. Bdodpfx Ako Ahppdjnei - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2003, machine/vehicle number: AII 146363, Offer 26333 Technical data: Bdsdpj Ahhykjfx Aknoi - Total operating hours: 56167 h - Operating pressure: 10 bar - Delivery rate: 14.5 l/s - Drive: 400 V / 7.5 kW - Space requirement: approx. W 950 x H 1250 x D 850 mm - Weight: approx. 250 kg

Condition: used, Year of construction: 2009, machine/vehicle number: APF.142521, overall weight: 8,360 kg, total length: 4,320 mm, total width: 2,150 mm, total height: 2,520 mm, power: 400 kW (543.85 HP), TECHNICAL DETAILS Engine power: 400 kW Engine voltage: 6,000 V Operating pressure: max. 8.50 bar Delivery rate (FAD): 66.60 m³/min MACHINE DETAILS Bdjdpj Ahgk Ejfx Aknoi Dimensions & Weight Dimensions (L x W x H): 4,320 x 2,150 x 2,520 mm Weight: 8,360 kg EQUIPMENT Water cooling

Condition: new, functionality: fully functional, overall weight: 205 kg, color: yellow, fuel type: gasoline, fuel tank capacity: 20 l, motor manufacturer: Honda, power: 15.5 kW (21.07 HP), volume flow: 1 m³/h, operating pressure: 15 bar, pressure (max.): 15 bar, type of cooling: air, mobility: mobile, Year of construction: 2026, Kaeser Mobilair M17 Construction Compressor incl. DLA (A) NEW Bdedpe Ahd U Ajfx Aknoi Kaeser Mobilair M17 Construction Compressor incl. DLA (A) – NEW | 1.0 m³/min Free Air Delivery | 15 bar Operating Pressure | Honda GX 630 Petrol Engine Technical Data: Manufacturer: Kaeser Model: Mobilair M17 Condition: NEW Operating Pressure: max. 15 bar Free Air Delivery: 1.0 m³/min Engine: Honda GX 630 petrol engine Engine output: 15.5 kW Tank capacity: 20 liters petrol Compressed air connection: 1 x G 1/2 Operating weight: 205 kg Transport frame: with carry handles Equipment: Compressed air aftercooler DLA (A) & condensate separator incl. connection hoses Starting system: Electric start Highlights & Features: - Compact high-pressure compressor for versatile construction site applications - Honda petrol engine – powerful & reliable - 15 bar operating pressure – ideal for specialized applications - Aftercooler & condensate separator – for dry compressed air - Transport frame with carry handles – easy handling - G 1/2 connection – compatible with standard compressed air systems - Made by Kaeser – proven quality & immediately available Areas of Application: ✓ Operation of high-pressure pneumatic tools ✓ Road and civil engineering ✓ Fiber optic expansion ✓ Municipal operations & maintenance ✓ Construction companies, landscaping & utility services ✓ Infrastructure & renovation projects Location: Depot at D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Germany-wide & international on request Pricing: Ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded More compressors & sizes available! ➡️ Mobile & stationary compressors, pneumatic tools, hoses & accessories Kaeser compressor for sale | Mobilair M 17 NEW | High-pressure compressor 15 bar | Compressor with Honda GX 630 | 1 m³/min free air delivery | Compressed air for construction sites | Kaeser compressed air technology | Compressor with aftercooler & condensate separator Your reliable partner for compressed air & construction equipment: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Contact us now & secure immediately available new equipment! If required, we are happy to offer a virtual inspection of the machine via video call.

Condition: excellent (used), Year of construction: 2010, Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Bdede Agyh Topfx Aknei Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2024, Exhibition and demonstration unit New Kaeser Aircenter SM 16 – 10 bar screw compressor with integrated refrigeration dryer and compressed air tank Sigma Control 2 control system Year of manufacture: 2024 Operating hours: few Pressure: 7.5 bar Rated power: 9 kW Delivery rate: 1.61 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Refrigeration dryer pressure dew point: +3°C Electrically controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Bdodj Agw Dmepfx Aknoi Location: available from warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2020, functionality: fully functional, overall weight: 170 kg, total length: 705 mm, total width: 750 mm, total height: 1,800 mm, volume flow: 520 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 78 dB, type of cooling: air, Equipment: type plate available, Little-used compressor (90% used for blowing air) from a model-making business for sale: V-belt-driven 2-cylinder unit with two-stage compression for 10 bar pressure, increasing performance and ensuring high efficiency. Tank with baked-on internal coating. 15-year warranty* on the tank against rust. Standard equipment includes all fittings: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensate drain valve, and shut-off valve. Standard equipment includes rubber vibration dampers. Electrical connection 400 V/50 Hz (three-phase). Intercooler and aftercooler ensure rapid cooling of the generated compressed air. The low speed reduces vibrations, protects the compressor components, and reduces noise. Large fan impeller for optimum cooling. Easily accessible condensate drain under the tank. Also suitable for easy connection of a condensate drain line (Ecomat). Retrofitting of a refrigerant dryer is possible without any problems. Bdodpe Agwf Nefx Aknoi Space-saving solution with a vertical tank. Technical data: Pressure: 10 bar Intake capacity: 660 l/min Speed: 1025 min-1 Tank volume: 270 l Weight: 170 kg Noise: 78 dB(A) Dimensions (W x D x H): 750x705x1800 mm Effective delivery rate: 520 l/min

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 8 (5 to 13 bar) include controller Air Control Basic Year of construction: 2026 Operatin hours: 1 The compressor is new and unused. It has scratches on the outside. Technical specifications Type: Combi XP 8 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.17 to 1.43 m³/min at 6 bar (g): 0.17 to 1.35 m³/min at 7 bar (g) : 0.17 to 1.25 m³/min at 8 bar (g) : 0.17 to 1.16 m³/min at 9 bar (g) : 0.17 to 1.07 m³/min at 10 bar (g) : 0.17 to 0.98 m³/min at 11 bar (g) : 0.17 to 0.89 m³/min at 12 bar (g) : 0.16 to 0.83 m³/min at 13 bar (g) : 0.16 to 0.75 m³/min Nominal power drive motor: 7,5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/42-230 V / Hz Compressed air connection: 3/4“ G Length: 691 mm Width: 1051 mm Height: 1088 mm Weight: 350 kg Bjdpe Agv A Aefx Aknedi Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, Year of construction: 2026, NEW ARRIVAL!!! CORMAK AIR55/200 Screw Air Compressor – Compact Power for Your Business Are you looking for a professional solution to power pneumatic tools in your workshop, paint shop, or small production line? The CORMAK AIR55/200 screw air compressor is the perfect choice. With a motor power of 5.5 kW and an impressive actual air delivery of up to 690 L/min, it provides a continuous supply of compressed air essential for the efficient operation of impact wrenches, air blow guns, and spray painting tools. Powered by 400 V, this model has been designed for continuous operation, making it an excellent choice for demanding applications such as smaller workshops, tire service centers, and craft businesses. Investing in a CORMAK screw air compressor is a step towards significantly improving working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The CORMAK AIR55/200 features a reliable and robust direct-drive system that eliminates vibrations and the need for belt drive adjustments. This proven solution ensures stable performance and a long service life by transferring power directly from the motor to the screw compression unit. The maximum operating pressure generated by this screw air compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM series electronic control panel, giving you access to essential compressor information and improving flexibility and control over your operations. ✅ Pressure: up to 10 bar | ✅ Air Delivery: up to 690 L/min | ✅ Power: 5.5 kW | ✅ Power Supply: 400 V Key Features That Set These Models Apart 1. Permanent Magnet (PM) Motor Technology - High energy efficiency: These motors achieve efficiency levels corresponding to IE4 or even IE5 standards. - Excellent performance at low speeds: They maintain high efficiency even at very low rotational speeds, unlike conventional motors, which lose efficiency when operating outside their rated speed range. - Compact and lightweight design: PM motors are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive (VSD) Control - Demand-based operation: The compressor does not operate according to the traditional "all-or-nothing" principle (load/unload operation). If your equipment requires only 30% of the compressor's capacity, the compressor automatically reduces its motor speed, consuming proportionally less energy. - Elimination of unnecessary idle operation: Conventional compressors often continue running for several minutes after filling the air receiver, consuming approximately 25–30% of their rated power without producing compressed air. 3. Soft Start Technology - Reduced electrical load: Protects the facility's electrical installation by minimizing high starting currents. - More frequent start-stop cycles: Allows the compressor to start and stop more frequently without the risk of overheating the motor windings. Technical Specifications Bodpj Agu N Refx Aknodi Motor Power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Air Delivery at 0–6 bar Average 690 L/min Air Delivery at 6 bar 690 L/min Air Delivery at 8 bar 650 L/min Air Delivery at 10 bar 650 L/min Air Outlet Connection Diameter (G) 1/2" Dimensions with Air Receiver Tank 1430 × 650 × 1320 mm Weight 170 kg

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET Bdjdpfx Ako Agu I Tenoi 230 V Screw Air Compressor THE SET INCLUDES: - CORMAK AIR30 SCREW AIR COMPRESSOR. - 150 L HORIZONTAL COMPRESSED AIR RECEIVER TANK (with wheels). CORMAK AIR30 Screw Air Compressor – Compact Power for Your Business Are you looking for an efficient and reliable air compressor suitable for smaller workshops, service centers, or hobby applications, while also requiring a single-phase power supply? The CORMAK AIR30 screw air compressor is the perfect solution. With a motor power of 3.0 kW and an impressive actual air delivery of up to 400 L/min, it provides a continuous supply of compressed air essential for the efficient operation of impact wrenches, air blow guns, and spray painting tools. Powered by 230 V / 50 Hz, this model has been designed for continuous operation, making it an excellent choice for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw air compressor is a step towards significantly improving working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The CORMAK AIR30 features a reliable and robust direct-drive system that eliminates vibrations and the need for belt drive adjustments. This proven solution ensures stable performance and a long service life by transferring power directly from the motor to the screw compression unit. The maximum operating pressure generated by this screw air compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM series electronic control panel, giving you access to essential compressor information and improving flexibility and control over your operations. ✅ Pressure: up to 10 bar | ✅ Air Delivery: up to 400 L/min | ✅ Power: 3.0 kW | ✅ Power Supply: 230 V Technical Specifications Parameter Specification Motor Power 3.0 kW / 4 HP Voltage 230 V / 50 Hz Air Delivery at 0–6 bar Average 400 L/min Air Delivery at 6 bar 390 L/min Air Delivery at 8 bar 380 L/min Air Delivery at 10 bar 380 L/min Air Outlet Connection Diameter (G) 1/2" Dimensions 1110 × 650 × 1320 mm Weight 145 kg

Condition: good (used), Year of construction: 2016, machine/vehicle number: AP I 260800, Offer 26334 Technical data: Bdodpfx Akj Agr Ewsnei - Operating hours: 28407 h - Operating pressure: 12.75 bar - Delivery rate: 1.95 m³/min - Drive: 400 V / 11 kW - Motor speed: 3000 rpm - Integrated dryer - Space requirement: approx. W 1500 x H 1600 x D 750 mm - Weight: approx. 420 kg

Condition: good (used), Year of construction: 2007, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Boge, screw compressor type S 15 -Drive power: 11 kW -Volume flow rate: 1.45 m³/min -Max. pressure: 10 bar -Refrigerated compressed air dryer: Type DT 18 -Compressed air tank: Capacity 350 L -Filter: with contamination indicator -Condensate drain: Type CCD 10 -Individual components: see photos Bodj Af Ik Hspfx Aknsdi -Dimensions: 1870/800/H1560 mm -Weight: 400 kg

Condition: excellent (used), Year of construction: 2024, ATLAS COPCO XAVS448 mobile compressor, machine with end cooler, year 2024 Technical data: capacity: 26.4 m3/min; working pressure: 14 Bar; year of manufacture: 2024 engine: SCANIA 232kW mileage: 947h compressor in fully working condition, ready for operation, warranty included net price: 399,000 PLN Bedpj Af H Uysfx Aknedi gross price: 490,770 PLN machine imported in perfect condition Links to videos are provided below.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO XAS137 portable compressor – machine after a full service. Technical data: capacity: 7.70 m3/min; operating pressure: 7 Bar; year of manufacture: 2015 engine: KUBOTA mileage: 1928h compressor is fully operational, ready for work, with warranty. Bdjdo Af H Tcspfx Aknei net price: 48,500 PLN gross price: 59,655 PLN machine imported in excellent condition. Links to videos are provided below.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO XAHS186 portable compressor with aftercooler, fully serviced. Technical specifications: capacity: 10.50 m3/min; Bdsdpo Af H Sxofx Aknsi operating pressure: 12 bar; year of manufacture: 2015; engine: DEUTZ, 104 kW operating hours: 1939 h The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: PLN 109,500 Gross price: PLN 134,685 The machine was imported in excellent condition and has all the necessary documents for registration. Links to videos are provided below.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, GRASSAIR RLR 1500VT screw compressor (ATLAS COPCO screw module), machine after service, with frequency converter (variable speed). Technical data: capacity: 1.70 m3/min (1700 L/min); engine power: 11 kW; maximum pressure: 12.5 bar; year: 2012 operating hours: 1610h compressor in full working order; net price: PLN 8,800 gross price: PLN 10,824 Bedpfj Afhqvsx Aknedi Link to video below.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, GRASSAIR RLR 40E VT G10 screw compressor (ATLAS COPCO screw module), machine with frequency converter and air dryer, recently serviced. Technical data: capacity: 5.60 m3/min (5600 L/min); Bodpfxs Afhmws Aknodi engine power: 30 kW; maximum pressure: 9.7 bar; operating hours: 10782 h; year: 2013; compressor in fully working condition; net price: 14,700 PLN gross price: 18,081 PLN Link to video below.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CREEMERS RCB7.5 screw compressor, 13-unit machine, recently serviced. Technical specifications: Capacity: 1000 L/min; Engine power: 7.5 kW; Pressure: 13 bar; Operating hours: 7617!!! Year of manufacture: 2005; Bodpfx Aks Afhmdonodi Compressor is in fully working condition. Net price: 8700 PLN Gross price: 10701 PLN Video available below.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CREEMERS RCA5.5 screw compressor, machine, serviced. Technical specifications: Capacity: 600 L/min; Engine power: 5.5 kW; Pressure: 10 bar; Operating hours: 6230h!!! Year: 2017; Compressor in fully working order. Bdjdpfxe Afhk No Aknei Net price: 8700 PLN Gross price: 10701 PLN Video available below.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, ATLAS COPCO GA90VSDFF screw compressor, a DEMONSTRATION unit, with a frequency converter, dryer, and heat exchanger. The compressor has dents and scratches!!!! Technical specifications: Bodpfx Ake Afhkpensdi capacity: 17.79 m3/min; engine power: 90 kW; maximum pressure: 12.75 bar; operating hours: 10h; year: 2018; price: 92,500 net; price: 113,775 gross. The compressor is fully functional, ready for operation, and comes with a warranty. We provide service support. See the video below.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, ATLAS COPCO GA22VSD screw compressor with frequency inverter, serviced. Technical specifications: Bsdpfj Afhi Ejx Aknjdi Capacity: 3840 m3/min; Engine power: 22 kW; Maximum pressure: 12.80 bar; Year: 2008 Operating hours: 11543 h Price: 17,800 net Price: 21,894 gross The compressor is in perfect working order, ready for use, and comes with a warranty. We also provide service support. Link to video below.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, ATLAS COPCO GA22VSD screw compressor with inverter, serviced. Technical data: Bdodpfx As Afhh Ueknsi capacity: 3840 m3/min; engine power: 22 kW; maximum pressure: 12.80 bar; year: 2008; operating hours: 11326 h. Price: 17,800 net 21,894 gross The compressor is in full working order, ready for operation, and comes with a warranty. We provide service support. Link to video below.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ATLAS COPCO GA11VSD screw compressor with frequency inverter, serviced. Technical data: Bdsdpfs Afhhusx Aknji capacity: 1.70 m3/min; engine power: 11 kW; maximum pressure: 10 bar; operating hours: 8236 h; year: 2009. Price: 12,800 net. 15,744 gross. Compressor in perfect working order. We provide service support. Link to video below.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO GA11 PLUS screw compressor, machine, serviced. Technical data: capacity: 2.03 m3/min; engine power: 11 kW; maximum pressure: 8.5 bar; operating hours: 7824 h; year: 2015. Bdedj Afhhhspfx Aknoi Price: 15,200 net. 18,696 gross. The compressor is in perfect working order. Service is guaranteed.