PescoTech Inh. Sandro Pesce

Condition: used, Year of construction: 2007, Manufacturer IXION GmbH & Co. KG, Germany Model / Type TLF 1004 Machine type CNC deep drilling and milling machine Year 2007 Djdpfxoz Nyz Ns Al Aoku Machine number 950-483 Axis Travels and Rotary Table X-axis travel 2,000 mm Y-axis travel 800 mm Z-axis travel 2,000 mm B-axis rotary table 360 degrees

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Mini Mill was manufactured in 2024. It features an X-axis travel of 406 mm, Y-axis travel of 356 mm, and Z-axis travel of 381 mm. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Table (~ max): 19.0 in (483 mm) • Spindle Nose to Table (~ min): 4.0 in (102 mm) • Spindle Max Rating: 10.0 hp (7.5 kW) • Spindle Max Torque: 45.0 ft-lbf @ 500 rpm (61.0 Nm @ 500 rpm) • Spindle Drive System: Direct Speed, Belt Drive • Bearing Lubrication: Grease Packed • Cooling: Air Cooled • T-Slot Width: 0.626 in to 0.630 in (15.90 mm to 16.00 mm) • T-Slot Center Distance: 4.33 in (110 mm) • Number of Std T-Slots: 3 • Max Cutting Feedrate: 650 ipm (6.5 m/min) • Rapids on X / Y / Z: 800 ipm (20.3 m/min) • Axis Motors Max Thrust (X, Y, Z): 2000 lbf (8896 N) • Tool Changer Type: Carousel • Max Tool Diameter (full): 3.5 in (89 mm) • Max Tool Length (from gage line): 12.00 in (305 mm) • Tool-to-Tool (avg): 4.20 s • Chip-to-Chip (avg): 5.00 s • Coolant Capacity: 45 gal (170 L) • Air Required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi (5.5 bar) • Input AC Voltage (1 Phase): 220 VAC, Full Load Amps: 40 A • Input AC Voltage (3 Phase Low): 220 VAC, Full Load Amps: 25 A • Input AC Voltage (3 Phase High): 440 VAC, Full Load Amps: 13 A • Domestic / Export Pallet Dimensions: 90.0 in x 80.0 in x 92.0 in (229 cm x 203 cm x 234 cm) • Shipping Weight: 4450 lb (2018.5 kg) Additional equipment Dkodpfxjz Nywko Al Aou • Renishaw Wireless Intuitive Probing System (WIPS) with OTS table probe installed • Flexible coolant nozzle assembly Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. Dedpfx Alsz Nyvye Asku CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: excellent (used), Year of construction: 2012, Description Specification Manufacturer TATUNG-OKUMA Model GENOS L300E-M Manufacturing Date 30 January 2012 Serial Number PEA258 CNC Control OKUMA OSP P200LA-R MCS3 Machine Type CNC Turning Centre with Driven Tools CE Declaration of Conformity Available Tool Turret 12 Stations Tailstock Included Parts Catcher Listed in machine documentation Bar Feeder Interface Listed in machine documentation 2. Machining Capacity Description Specification Maximum Turning Diameter Ø300 mm Maximum Turning Length 1,060 mm Maximum Swing Over Bed Ø520 mm X-Axis Travel 235 mm Z-Axis Travel 1,144 mm Main Spindle Speed 30–3,000 rpm Spindle Nose A2-8 Main Spindle Motor Power 11 / 7.5 kW (30 min / continuous) 3. Turret and Driven Tools Dsdpfxez Nyvte Al Aeku Description Specification Tool Turret 12 Stations Turret Type M-V12 Driven Tool Capability Yes Driven Tool Speed 45–4,500 rpm Driven Tool Motor Power 7 / 3.3 kW C-Axis 360° C-Axis Indexing Resolution 0.001° 4. Equipment and Features - OKUMA OSP P200LA-R CNC control system - 12-station tool turret - Driven tooling capability for milling and drilling operations - C-axis positioning - Tailstock - Parts catcher (indicated in documentation)

Condition: good (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 1993/68, Graule Type ZS 135 Cut-off and Miter Saw Used machine Serial No. 68, Year of Manufacture 1993 Article number: JA_G261001 Description Cutting height 90° max. 135 mm Cutting width 90° max. 430 mm Cutting width 45° max. 300 mm Swivel range +/- 45° Adjustment manual Power 400V / 50 Hz 2.2 kW Speed 3800 rpm Saw blade max. 350 mm Working height 885 mm Dust extraction 100 mm Dimensions W x D x H 900 x 1200 x 1400 mm Weight approx. 105 kg Roller conveyor RLK Length 3000 mm Depth 400 mm Folding stop yes Total weight approx. 190 kg Condition / Work performed • Machine roughly cleaned • Machine functionality tested • Age-related and usage-related signs of wear • Available ex warehouse Subject to errors and changes in technical specifications. Dkodpfx Asz Nyu Nsl Aou Note: Used item: • Prices apply as ex works prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • All items are sold as seen, without any warranty claims. The buyer is free to inspect the items at the location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the picture are not included in the scope of supply. • Saw blades are only for illustrative purposes and are not included in the scope of supply. Shipping options: • We will gladly provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is free of charge by arrangement. (Assembly and demonstration of the goods for demonstration purposes is optional and can be arranged!) • Our trained service personnel can optionally assemble the machine at your location and provide you with a brief training session. Travel, transportation and service costs are subject to an additional charge.

Condition: excellent (used), mileage: 5,000 km, power: 331 kW (450.03 HP), first registration: 09/2025, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 6,400 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2025, Equipment: crane, Technical Information Dsdpfez Nyuiex Al Asku Number of cylinders: 6 Engine displacement: 10,800 cc Transmission Gearbox: ZF TraXon, 12 gears, automatic Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Max. axle load: 9000 kg; Tire tread depth left: 90%; Tire tread depth right: 90%; Suspension: Parabolic spring suspension Front axle 2: Tire size: 385/55R22.5; Max. axle load: 9000 kg; Tire tread depth left: 90%; Tire tread depth right: 90%; Suspension: Parabolic spring suspension Rear axle 1: Tire size: 315/70R22.5; Max. axle load: 13000 kg; Tire tread depth left: 90%; Tire tread depth right: 90%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Max. axle load: 13000 kg; Tire tread depth left: 90%; Tire tread depth right: 90%; Suspension: Air suspension Weights Unladen weight: 25,439 kg Payload: 6,561 kg GVWR: 32,000 kg Functional Lifting capacity: 17,370 kg Lifting height: 1,750 cm Crane: HMF 9520-OK5, year of manufacture: 2025, located behind the cab Condition Technical condition: very good Visual condition: very good Damage: none Warranty Warranty: None

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, Equipment: documentation/manual, CNC Lathe DMG GILDEMEISTER NEF 400 TECHNICAL DATA: • Year of manufacture 2006 • Turning length max. 650 mm • Swing over bed max. 400 mm • Swing over cross slide max. 270 mm • Control FANUC 210i • Spindle speed max. 4 000 rpm • Bar capacity max. 65 mm • Tool turret 8 stations (VDI 30) Dedpjz Nyucjfx Al Ajku • Tailstock MT 4 • USB • Technical documentation • Machine dimensions approx. 2.1 x 1.8 x 1.7 m • Weight approx. 2 800 kg Machine in very good technical condition, the spindle runs quietly – it has been completely overhauled and has 0 operating hours. The lathe is connected to power and can be inspected and tested on site by prior appointment. Professional loading is included in the price, and we can also help you organise transport within the EU. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: used, mileage: 343,000 km, power: 207 kW (281.44 HP), first registration: 11/2021, fuel type: diesel, empty load weight: 7,600 kg, maximum load weight: 8,400 kg, overall weight: 16,000 kg, axle configuration: 4x2, wheelbase: 5,600 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,480 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, tail-lift, truck registration, Iveco EuroCargo 160-280 4x2 Flatbed/Box Truck First registered: 11/2021 343,000 km with documentation 6-cylinder engine, 280 hp / 6728cc displacement Dodpfx Aljz Nytle Asku Euro 6 emissions class Long-distance cab Automatic transmission Adaptive cruise control Lane keeping assist Air conditioning, auxiliary heater Air suspension on the rear axle Wheelbase 5600mm Tires 285/75 R19.5, tread depth approx. 60% Box dimensions: Length 7300mm x Width 2490mm x Height 2480mm Tail lift, capacity 1500 kg Weight variant 16,000 kg Unladen weight 7,600 kg The vehicle is from a single owner and is in good condition. Net/Export price: 39,900 Euros All information provided without guarantee, errors and omissions excepted.

Condition: used, mileage: 310,300 km, power: 235 kW (319.51 HP), first registration: 11/2014, fuel type: diesel, empty load weight: 9,510 kg, maximum load weight: 8,490 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,100 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 40 m³, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, MAN TGS 18.320 4X2 BL box truck with driving school equipment First registered: 11/2014 310,300 km with documentation Euro 6 emission class Long-distance cab with 6 seats Automatic transmission Engine brake Air conditioning Trailer coupling prepared Rear axle with air suspension Tires 315/80 R22.5 Proil, approximately 70% tread Box body interior: L: 6800mm x W: 2480mm x H: 2380mm Portal doors Unladen weight: 9,510 kg The vehicle is from its first owner and was only used as a driving school vehicle. It is in good condition. Dkjdpjz Nytrjfx Al Asu Export/net price: 19,900 Euros All information is without guarantee, errors and omissions excepted.

Condition: used, mileage: 397,200 km, power: 240 kW (326.31 HP), first registration: 01/2013, fuel type: diesel, empty load weight: 13,010 kg, maximum load weight: 12,990 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space length: 6,700 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Mercedes-Benz Axor 2533 6x2 flatbed truck with crane First registration: 1/2013 397,200 km with documentation Euro 5 emission class Short cab Manual transmission Air conditioning Rear axle with air suspension 3rd axle can be lifted and steered Wheelbase 5100 mm Tires 315/80 R22.5 Flatbed length 6700 mm Unladen weight 13,010 kg Crane: Hiab 144-2 Year of manufacture: 2013 Radio remote control 2x hydraulically extendable 2.70 m / 5300 kg 4.00 m / 3500 kg 5.90 m / 2400 kg 7.80 m / 1850 kg Hook height approx. 11.5 meters The vehicle is from its first owner and is in good condition. Net/export price: EUR 29,900 Djdpfx Alsz Nytxo Aoku All information is without guarantee, errors and omissions excepted.

Condition: used, mileage: 397,200 km, power: 240 kW (326.31 HP), first registration: 01/2013, fuel type: diesel, empty load weight: 13,010 kg, maximum load weight: 12,990 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space length: 6,700 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Mercedes-Benz Axor 2533 6x2 flatbed truck with crane First registration: 1/2013 397,200 km with documentation Euro 5 emission class Short cab Manual transmission Air conditioning Rear axle with air suspension 3rd axle can be lifted and steered Wheelbase 5100 mm Tires 315/80 R22.5 Flatbed length 6700 mm Unladen weight 13,010 kg Crane: Hiab 144-2 Year of manufacture: 2013 Radio remote control 2x hydraulically extendable 2.70 m / 5300 kg 4.00 m / 3500 kg 5.90 m / 2400 kg 7.80 m / 1850 kg Hook height approx. 11.5 meters The vehicle is from its first owner and is in good condition. Net/export price: EUR 29,900 Djdpfxoz Nyt Ee Al Aoku All information is without guarantee, errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 330 mm, table load: 250 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, tool weight: 2,000 g, number of axes: 3, This 3-axis HAAS DC-1 was manufactured in 2024. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 330 mm. The machine includes a robust table size of 700 x 420 mm and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the HAAS DC-1 vertical machining centre we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Spindle nose to table: max 18.9 in / 480 mm; min 5.9 in / 150 mm • Spindle: max torque 14.0 ft-lbf @ 2500 rpm / 19.0 Nm @ 2500 rpm; inline direct-drive; taper BT30; grease-packed bearings; liquid-cooled • Table: 27.6 in / 700 mm (L) x 16.5 in / 420 mm (W); T-slot width 0.550 in / 14 mm; T-slot center distance 4.92 in / 125 mm; 3 T-slots; max load 550 lb / 250 kg (evenly distributed) • Feedrates: max cutting 1200 ipm / 30.5 m/min; rapid (X/Y/Z) 1890 ipm / 48.0 m/min • Max thrust (X/Y/Z): 2054 lbf / 9137 N • Tool changer: turret; capacity 21; max tool dia (full) 2.4 in / 60 mm; max tool dia (adjacent empty) 3.1 in / 80 mm; max tool length 7.90 in / 200 mm; tool-to-tool 1.50 s; chip-to-chip 2.50 s Dsdpjz Nytfjfx Al Ajku • Max tapping speed: 5000 rpm • Coolant capacity: 40 gal / 151 L • Air: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar; inline air hose 3/8 in; air coupler 3/8 in; min pressure 80 psi / 5.5 bar • Power: 3-phase 220 VAC (FLA 40 A) or 440 VAC (FLA 20 A) • Shipping: 100.0 in x 79.0 in x 100.0 in / 254 cm x 201 cm x 254 cm; weight 7040 lb / 3402.0 kg Additional equipment • CW-5200 industrial chiller • Chip conveyor Technical Specification Taper Size BT 30

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2008, total width: 2,470 mm, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2008, Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.400 kg Dksdpfxoz Nyr Us Al Aeu Carrying capacity: 37.600 kg GVW: 43.000 kg Identification Registration number: OK-81-GR

Condition: used, Powder coating booth with multi-cyclone and afterfilter Dodpfx Aez Nyqwel Asku For sale is a professional, complete industrial system for powder coating: A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with afterfilter). This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideally suited for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data: • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and afterfilter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Booth base with inlet, manual coating opening, and gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / Afterfilter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power afterfilter:   15 kW with 12 filter plates (air volume flow: 8000 m³/h)   22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important pickup & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). “Everything from one source: We would be happy to offer you a suitable bank financing option for your project.” More items - new and used - can be found in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00668, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, FANUC R-2000iB/165F manufactured in 2010.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/165F Model Number: A05B-1329-B201 Year of Manufacture Robot: 2010.06 Dodpfx Aljz Nyp Ts Ajku Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1170   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2009.06 RCC Length (m): 14   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 10  

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Dodpfx Aljz Nyp He Ajku Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: used, Year of construction: 2022, HOLZ-HER ARTEA 1030 Edgebanding Machine - Used Machine Edge thickness, roll material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Glue application with the Holz-Her GluJet GJ101 - PUR / EVA glue from a single system, with optical zero-gap technology. Handles all common edge types, up to 5 mm solid wood edges. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting sensor shoes, vertical, bottom - LED machine lighting - Infrared heating unit - Joint milling cutters - Edge feeder - GluJet GJ101 glue application system for PUR & EVA + magazine for 4 cartridges + automatic reloading - Glue collection container - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraper unit - Surface scraper - Spray device - Buffing unit Djdpfx Ajz Nyptel Aoku The machine has been refurbished and inspected by our technicians in Nürtingen. Delivery, installation and training for the machine can be arranged directly through us for an additional charge. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: good (used), Year of construction: 1981, machine/vehicle number: 2627, Offer 26236 Technical Data: - max. working width 3040 mm - max. material thickness ST 37 4 mm - swiveling upper beam - bending angle adjustment, electronically pre-selectable 0 - 135° - max. lifting height of the upper beam 350 mm - lifting height of the upper beam, electronically pre-selectable - adjustability: - of the bending beam 125 mm Dsdpfx Aloz Nypgo Aeku - of the lower beam 125 mm - upper beam drive 400 V / 4.0 kW - bending beam drive 400 V / 5.5 kW - space requirement approx. W 3950 x H 1600 x D 1200 mm - weight approx. 4800 kg - includes: - foot pedal - bending rails - backstop

Condition: ready for operation (used), functionality: fully functional, steel frame bearing rollers width 50 cm lengths: 80 cm, 150 cm, 200 cm, 250 cm double width: 120 cm length: 240 cm on wheels with swivel base, width 85 cm length: 220 cm, 270 cm Net price per running meter Tables available in our warehouse in Biertowice, near Krakow. Dkjdpsz Nypasfx Al Aeu

Condition: good (used), Year of construction: 2013, operating hours: 1,561 h, functionality: fully functional, General Information Description Specification Manufacturer MAZAK Model Quick Turn Smart 200 CNC Control Mazatrol Smart Year of Manufacture 2013 Serial Number 249187 Total Operating Hours 11,755 hours Cutting Hours 1,561 hours Network Connection LAN Condition Very good technical condition, clean, accurate and exceptionally well maintained 2. Machining Capacity & Working Area Description Specification Maximum Swing Diameter 530 mm Dksdpfx Aez Nyn Nel Aeu Maximum Swing Over Cross Slide 343 mm Bar Capacity 65 mm Spindle Bore 76 mm X-Axis Travel 195 mm Z-Axis Travel 560 mm X-Axis Rapid Traverse 30,000 mm/min Z-Axis Rapid Traverse 33,000 mm/min 3. Spindle & Tooling Description Specification Maximum Spindle Speed 5,000 rpm Spindle Motor Power 15 kW Selectable Thread Start Position Yes Through-Tool Coolant Yes Tool Turret 12 stations Turret Indexing Time 0.17 seconds per station Tailstock Automatic, MT5 Tool Measuring Arm Included Parts Catcher Included Robot Interface Additional M-function (1 pair) Smartshift BASE Quick-Change System Included Chuck SMW AUTOBLOK Collet Chuck 4. Integrated Automation – Universal Robots UR5e Collaborative Industrial Robot (Cobot) Description Specification Manufacturer Universal Robots Model UR5e Year of Manufacture January 2021 Robot Type Collaborative Robot (Cobot) Usage Demonstration use only Payload 5 kg Reach 850 mm Repeatability ±0.03 mm Working Envelope 2.6 m³ Maximum TCP Speed 1,000 mm/s Joint Speed 180°/s Robot Weight 21 kg Mounting Options Floor, ceiling, wall or angled mounting Power Supply 100–240 V AC Power Consumption Approx. 200 W Controller UR e-Series Control Box Programming URScript and graphical block programming Safety Standards ISO 10218-1, ISO/TS 15066, PLd Category 3 Fieldbus Communication PROFINET, EtherNet/IP, Modbus TCP Digital I/O 16 inputs / 16 outputs Analog I/O 2 inputs / 2 outputs Tool Flange ISO 9409-1-50-4-M6 5. Robot Integration with Mazak Smart 200 The UR5e robot is fully integrated with the Mazak Quick Turn Smart 200, providing a complete automated machining solution. - Smartshift BASE quick-change coupling system - Additional M-function for robot interface - Pre-programmed automation sequences - Quick switching between manual and robotic operation - Video available showing the robot and machine operating together - Fully tested and used in production - Complete robot and machine integration 6. Machine Condition The machine is reported to be in excellent technical and operational condition. - Fully operational and functioning correctly - No active alarms or critical faults - Smooth movement on all axes - Spindle runs smoothly without abnormal vibrations - Linear guides and ball screws in good condition - Hydraulic and pneumatic systems functioning normally - Regular in-house maintenance performed - Lubrication system operating correctly - Primarily used for light machining of aluminium and plastic components - Robot and CNC machine fully integrated and tested 7. Documentation Available - Machine photographs - Video of machine operation - Complete machine manuals - Electrical diagrams

Condition: used, mileage: 291,000 km, power: 103 kW (140.04 HP), first registration: 06/2023, fuel type: diesel, empty load weight: 2,113 kg, overall weight: 2,800 kg, axle configuration: 4x2, next inspection (TÜV): 07/2027, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 5,986 mm, construction height: 2,590 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9A Mon-Fri 9:00 AM - 5:00 PM Sat 10:00 AM - 1:00 PM Tel: Mobile/WhatsApp: VEHICLE FINANCING & TRADE-INS POSSIBLE * 1st OWNER, * AIR CONDITIONING Dkodpfx Alez Nynve Aeu * REVERSING CAMERA + PARKING DISTANCE CONTROL * ON-BOARD COMPUTER, * DAB RADIO * BLUETOOTH HANDS-FREE SYSTEM, * ELECTRIC MIRRORS, * ELECTRIC WINDOWS, * 3 SEATS, TRUCK (all with 3-point seatbelts), * LOAD AREA LINED, * DPF - EURO 6, * ELECTRONIC IMMOBILIZER, * PERMISSIBLE GROSS VEHICLE WEIGHT 2800 KG Please call to schedule a test drive appointment. Subject to prior sale and errors. Call us! We speak English. Financing, Trade-ins, You can find more offers on our website. The information provided in advertisements, on the internet, price tags, and in images is a non-binding description and does not constitute a guarantee of specific properties. The seller also assumes no liability for errors resulting from typing, spelling, and data transmission errors. The listed equipment may need to be checked separately. Please understand that, although the technical and visual condition of this vehicle is good, due to its age and mileage, we prefer to sell it to commercial businesses or for export, excluding any warranty. Thank you very much! The vehicle description serves only to generally identify the vehicle and does not constitute a warranty in the legal sense of purchase. The information does not claim to be complete and is not considered a guaranteed characteristic within the meaning of § 434 BGB, paragraph 1, sentence 3. Errors and prior sale remain reserved.

Condition: used, functionality: fully functional, Manufacturer: Rausch, as well as other manufacturers Diameter: 90 mm, suitable for Rausch vertical reaming machines RS 3, RS 4, RS 6. General / technical data: Well-maintained, used reaming mandrels suitable for use with flat reaming tools on Rausch reaming machines of the RS 3, RS 4, RS 6 series. Remarks: We have a large stock of well-maintained, used reaming mandrels for Rausch vertical reaming machines. Dksdpfx Aez Nynisl Asu

Condition: excellent (used), functionality: fully functional, mileage: 34,966 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, empty load weight: 2,255 kg, maximum load weight: 1,245 kg, first registration: 11/2024, next inspection (TÜV): 05/2028, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2024, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, second-hand vehicle warranty, sliding door, soot filter, truck registration, Special equipment: Overhead storage in driver's cab, Cargo Plus Package, reinforced rear axle (suspension), full-size spare wheel (incl. spare wheel holder), Traction Plus (electronic traction control incl. ESP), Visibility Plus Package Other features: Passenger airbag, driver's airbag, trailer stability program, traction control system (ASR), electrically adjustable and heated exterior mirrors, long exterior mirrors for vehicle width 2200 mm, black box (event data recorder, EDR), brake assist, roof antenna, Eco package, electronic parking aid, driver assistance system: adaptive load control (LAC), driver assistance system: hill start assist, driver assistance system: intelligent speed assistant, driver assistance system: drowsiness detection, driver assistance system: emergency braking assist, driver assistance system: post-collision system, driver assistance system: crosswind assist, driver assistance system: lane keep assist, driver assistance system: lane keeping assist incl. traffic sign recognition, driver assistance system: rollover protection, 180 A alternator, cruise control (including speed limiter), automatic transmission (8-speed), glove compartment with cooling function, infotainment system with 5" color display, DAB and Bluetooth interface, high-roof standard panel van body, fuel tank: 90 liters, black radiator grille, bulkhead, model update (2), engine 2.2 liter - 132 kW Multijet Power turbodiesel, wheelbase 4035 mm, tire repair kit, tire pressure monitoring system, acoustic reversing warning (external warning signal), low emissions according to Euro 6e standard, halogen headlights, sliding door to load/passenger compartment on right, upholstery/fabric seats, cab seats: twin passenger seat, cab seats: driver's seat with armrest and lumbar support, SMART tachograph (4.0), engine start/stop system, rear telecamera, UConnect telematics box, GVWR 3.50 t Dksdsz Nym Sepfx Al Asu

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Dkedpfxjz Nym Eo Al Asu

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: R-00723, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2024.03. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2024.03 Warranty term (months): 12   Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB Plus Year of Manufacture Cabinet: 2024.03 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Dkodpoz Nyitofx Al Asu Teach Pendant Cable Length (m): 12