Gml

Condition: ready for operation (used), Year of construction: 2012, A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible. Hsdpfoy N Uv Sox Ag Ijfg

Condition: ready for operation (used), Year of construction: 1987, A fully automatic Ferrum can filling and sealing machine is available. Can weight: 397g, can content: sweetened condensed milk, sealing heads: 6, throughput capacity: approx. 250cans/min, machine dimensions X/Y/Z: approx. 2300mm/1550mm/2300mm, weight: approx. 3500kg. The filling bowl has been repaired several times. Documentation available. An on-site inspection is possible. Expected to be available around September 2026. Hfedpfx Aoy N Uvxog Isg

Condition: ready for operation (used), Year of construction: 2010, A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible. Hsdpjy N Ddlefx Ag Isfg

Condition: used, System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg. Hsdsy Nnb Uspfx Ag Isfg Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on container size and product viscosity Capacity labeler appr.: 1080 units/h Formats: round plastic buckets ranging from 1 litre to 10 litres

Condition: used, Keg cleaning, filling and palletising system, consisting of the following components: - Keg external washer Schöttinger & Schäfer, year of manufacture 1987 Model: AW 2RB - Keg filling system Leifeld & Lemke, Year of manufacture: 1988 Consisting of: 1 line for pre-cleaning, KVR 1, Capacity: 140 kegs/hour 2 lines for main cleaning and filling, KRF1 and KRF 2 Capacity: 120 kegs/hour - CIP system with 5 containers Year of manufacture: 1988 - Palletising and depalletising RST Year of manufacture: 1999 with pallet magazine and palletising robot (KUKA KR 125/1) Additional title: Keg cleaning and filling system with palletising; built 1987 - 1999 Capacity appr.: 120 Kegs/h Operation / Control: Simatic S7-300 Features: External washer; pre-cleaning, main cleaning and filling lines; CIP system; palletising with pallet magazine and robot Hfjdpfx Ajy Nm Uasg Ijg

Condition: used, Year of construction: 2011, Single-end machine for cleaning glass bottles. Hfedpfoy Nm Sxjx Ag Isg Additional title: Bottle washing machine Capacity: 3000 bottles/h Length: 4,43 m Width: 2,60 m Height: 2,52 m Base construction: Single-end machine Features: Feed table; bottle feed; pressure filter; side window; heat exchanger; overflow pump; lye pump; water pumps; temperature gauges; control cabinet with control panel

Condition: ready for operation (used), A fully automatic explosion-protected bottle filling system is offered. Filling station Mewes: 4 nozzles, suitable for alkaline and slightly volatile products, capper, labeling station Pago. Capacity max.: 1000 units per hour, container sizes: 150ml-1000ml, pneumatic drives. Accessories: working platform for container product feeding. Inspection by appointment possible. Hfedjy A Slqopfx Ag Ieg

Condition: used, incl. cyclone, frame, blower (Image 1 without Heger dust collection silo) 1/7 Frame 1,520 x 1,470 x 2,450 mm 2/7 Pipe package 3/7 Frame 1,500 x 1,500 x 2,800 mm 4/7 Frame 2,600 x 1,520 x 2,400 mm Hfjdpfxey Atr Es Ag Isg 5/7 Cyclone 6/7 Pipe package 7/7 Blower Additional images available

Condition: ready for operation (used), Waldner dosamat 2.2 cup filling, sealing and capping machine - 2 filling lanes - up to 4,800 cups per hour - cup destacking - piston filler for viscous products Hsdpfxeyzyvno Ag Iefg - seal foil destacker - heat sealing - capping

Condition: ready for operation (used), Year of construction: 2013, A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, filling capacity: approx. 3000 cups/h, filling volume: 850ml/1000ml. The control system and the servo systems of the machine were dismantled and are missing. Documentation available. An on-site inspection is possible. Hfedjyx H Ewjpfx Ag Iog

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 Hsdpfxoywucze Ag Iefg The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: ready for operation (used), Year of construction: 1992, A rotary indexing filling machine Hamba for piston-based dosing of liquid and viscous products is available. Cup diameter: 75mm, max. height: 80mm, filling volume range: 50ml-250ml, filling capacity: 4000/h, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible. Hedjywlpfjpfx Ag Iefg

Condition: ready for operation (used), A Gasti cup filling and sealing machine for preformed round cups, which has been used in the dairy industry, is available. Cup diameter: 95mm, output range: 2500-4500cups/h, filling volume range: 50ml-500ml, max. product temperature: 100°C, max. product pressure: 2bar. An on-site inspection is possible. Hfjdpfsywln Uex Ag Ijg

Condition: ready for operation (used), Diameter range: 52 mm – 65 mm Hodpfx Aeyv An Aeg Isfg Height range: Production capacity: up to 3000 c.p.h. No. of heads: 18 Tooling for approx. 52 mm (202) Filler and seamer available separately or together

Condition: used, Year of construction: 2010, Manufacturer : Serac Model : DMX R6V3/720 Hfodpfxjyr Sxns Ag Isg Year : 2010 Type: Monoblock filling and screwing   Current application: 250 mL bottle/vial - Ø38 mm screw cap Output: 3,300 bottles/hour Dosing: by weight Suction conveyor feed system ensuring bottle stability Heraeus UV tunnel: decontamination Feeding of caps via hopper and bucket conveyor and distributor Decontamination of bottle caps using Claranor pulsed light   Filling: 100L capacity hopper 6 nozzles on scales connected to the ejection of bottles at the machine outlet   Screwing: Tightening of caps using pneumatic jaws Adjustable clamping pressure

Condition: used, Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label box (2005) - Labelling machine (KHS Roland, 2009) - Best-before date detection device (2011) - Air knife blow-off system for bottles (2017) - CIP system (Procomac, 2001) with 3 tanks, each with a capacity of 20 hl - Free, powered conveyor lines for bottles and crates Hedpsyr N Utefx Ag Ijfg Additional title: non-returnable PET filling Capacity: 16000 bo/h Formats: 0.5 litre disposable PET bottles, 20-bottle crates Features: Bottle ejector, crate washer, 2 x stretch blow moulding machines, premixer, Velcorindo dosing, cap feeding and conveying, rinser/filler/capper, labelling machine, date coding, packer, best before date detection device, bottle blowing, bottle air transport, suction system, CIP system, free crate and bottle transport

Condition: used, Year of construction: 2010, This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator . Capacity: 2000 cps/hr Filling Type: Piston Filler Filling Volumes : 500-1000 gr Controls: Siemens HMI Cup disinfection: Peroxide Film Disinfection: UV Cup Diameter: 120 mm Film application: Heat sealing and cutting off roll Hjdpeyr Nlfjfx Ag Isfg Over cap: Plastic lid after sealing

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total width: 1,321 mm, total length: 1,067 mm, total height: 2,692 mm, input voltage: 240 V, input frequency: 60 Hz, Equipment: documentation/manual, Model NRK-400 In-Line Screw Capping Machine complete with conveyor and guide rails, gripper chains and gripper blocks, four pairs of quills (cap tightening discs), Cap H-26 Hopper/Sorter, cap delivery and application system for 99.8% efficiency. This system can handle both Lug and Screw caps up to 350 caps per minute, depending on product size and condition. The machine can be equipped with steam heating of caps as well as Steam or Gas injection. Compatible with caps ranging from 10-70mm. Include touchscreen controls, power height adjustment, pneumatic "on-the-fly" adjustable clutches, power height adjustable gripper belts, electronically controlled safety switches, Allen-Bradley controls, locking safety interlock switches, container spacing unit, LED safety stack lights, lock out tag out systems. Hfsdjyrkdpspfx Ag Ijg

Condition: used, Year of construction: 1999, Cone Ice Cream Filler — Machine Description This industrial Cone Ice Cream Filler is a purpose-built, high-efficiency production machine engineered for automatic filling of pre-formed ice cream cones. Designed for use in commercial frozen dessert facilities, the system delivers precise, hygienic portioning and consistent presentation, even with soft-serve, artisan, or premium ice cream products. Constructed with robust, food-grade stainless steel and sanitary components, the machine supports continuous high-speed operation while ensuring optimal product handling. The precision dosing mechanism gently fills each cone to the exact weight or volume specification, minimizing giveaway and reducing waste. Featuring a smooth indexing conveyor and adjustable fill heads, this filler is ideal for both medium and large-scale production lines. Its design integrates easily into existing workflows and can be paired with complementary packaging equipment such as automated cone stackers, cooling tunnels, or wrappers. Key Features - Automatic cone handling — accepts cones from feeding system and indexes them into fill position Hjdpfx Ageynr Dve Ijfg - Accurate, low-shear dosing — fills each cone consistently while preserving ice cream texture - Adjustable fill depth & speed — easily adapts to different cone sizes and product types - Food-grade stainless construction — designed for hygiene, cleanability, and long service life - Modular integration — compatible with upstream and downstream automation - User-friendly controls — intuitive interface for quick changeovers and production adjustment This cone ice cream filler is ideal for manufacturers seeking reliable performance, high throughput, and consistent portion accuracy in commercial production of cone-style frozen desserts. Outlet Capacity : 4000 pcs per hour Filling: Main filler Granular: Available Sirup Filler: Available Paper top applicator: Available Drop off conveyor: Available Condition: Good Available: Immediately

Condition: used, Year of construction: 2004, The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste. Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends. Key Features: - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway - Adjustable fill heights and speeds to accommodate tubs from small family sizes to larger multi-serve formats - Hygienic design with easy-clean sanitary surfaces, CIP compatible components, and sealed guarding - User-friendly interface for quick changeovers and reduced operator training time - Heavy-duty construction suited for continuous production environments - Smooth, low-shear filling preserves ice cream structure and reduces air entrainment - Optional integrations for lid placement, sealing, date coding, and packing conveyors Whether you’re scaling up production or upgrading your existing line, the Tortica Ice Group Family Tub Filler delivers dependable performance, precise filling accuracy, and the flexibility to support product innovation and seasonal variety offerings. Cup size: 200 x 100 mm (LxW) Granular application: Available Main filling: Available Cap Closing: Available Stations: Cup Dispenser > Filler > Granular Filler > Lid Closing > Outlet Conveyor Condition: Good Hfodpjynr Axjfx Ag Isg Available: Immediately

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Hfjdpsynrzbjfx Ag Ijg Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately

Condition: like new (used), HEMA monoblock filler with ZALKIN capper for PET bottles. This type of machine is suitable for dosing the following products: mustard, baby food, sauces, pastes, jams, etc., whether containing particulates or not. These machines are equipped with filling devices specifically designed for dosing viscous products. The HEMA filler operates in two key phases: suction and filling. These phases alternate continuously to ensure fast and accurate filling. The ZALKIN capping machine is engineered for placing and sealing aluminum screw caps—deformable or non-deformable (for carbonated or non-carbonated beverages)—as well as screwing aluminum or plastic caps, or applying snap-on or floating closures. The system is compatible with bottles made of glass, plastic, or metal, in various shapes. Output varies according to product type, container format, and fill volume, with a maximum output of up to 6,000 bottles per hour (120 bottles/min). Includes: - Cap feeder - Infeed conveyors - Discharge belts - Control panel - Automatic CIP cleaning system - Cylindrical filling valves - Heated-jacket pistons - Adjustable volume control for container size and filling capacity - Steam sweeping in the capper with vacuum closure - Schneider automatic touchscreen interface - Elevating bottle carrier Hfsdpfxoynkdzo Ag Isg

Condition: like new (used), COMPRESSED AIR PRESSURE: 8 BAR COMPRESSED AIR CONSUMPTION: 100 NL/MIN STEAM SATURATED DRY PRESSURE: 4 BAR STEAM CONSUMPTION: 40 KG/H WATER CONSUMPTION: 0.9 L/H. PRODUCTION OF 200 KG BAGS: 60 BAGS/HOUR. PRODUCTION OF 5-20 KG BAGS: 160 BAGS/HOUR CONTROL PANEL PROTECTION DEGREE: IP55 VOLTAGE: 220/380 V READY FOR FILLING 250L AND 1,000L DRUMS. - Production capacity depends on the format and product to be filled. Hsdpfoyni Hzsx Ag Isfg Packaging: Pre-sterilized flexible bags in pre-palletized drums - Up to 160 bags/hour (5 lt – 20 lt) - Up to 60 bags/hour (200 lt) - Up to 15 bags/hour (1,000 lt) Machine complete with roller conveyor for pallet infeed. Excellent condition.

Condition: used, Pamasol Autoguard Gas Filler and Crimper Type: 2005/20 Hedsymyqzspfx Ag Iefg Unit comes with Pamasol 2008/12 Propellant Pump 500 to 700 per hour Device is in excellent condition, very little use.

Condition: used, Year of construction: 1986, Manufacturer: DumekModel: ED100Year: 1986Type: Volumetric dosing machinePressure and dispensing time controlOperating mode: semi-automatic/automaticStainless steel hopper with double jacket: 15 L Hsdsygx S Rspfx Ag Isfg