Schreinerei Bessler CNC-Holzfraese

Condition: good (used), Year of construction: 2020, Biesse Rover K FT 1531 CNC Router.. YOM: 2020. £18,500 + VAT for UK Customers. This machine has an 9Kw HSD Electro spindle coupled with an automatic 9 x place tool changer. Whilst there is no drill block, the machine can use the router spindle to drill or cut holes as required. 2 x Vacuum Pumps to secure your workpiece onto the machine bed. Two Hold down rollers are positioned to assist (Especially with Plywood). Automatic tool length setting device. Biesse Suite B3 is installed to the machine. Dusdpfxjyhzqpj Ac Nen Manually load the machine with your sheet material (1560mm x 3100mm) load your programme and the machine will Router the nested shapes as programmed. With the auto outfeed device, the machine will push the completed parts from the work zone onto the outfeed conveyor. It will then return to the home position and Vacuum the working bed at the same time, ready to go again. Overall footprint Length = 9458mm x Width = 4756 x Height = 2570mm Maximum component thickness 90mm (Minimum 4mm). The machine will be disconnected and moved on Friday 13th Feb. It will be put into secure storage. Loading is included to your own transport. UK Delivery and Installation can be arranged at cost.

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 30,000 rpm, spindle motor power: 21,000 W, number of slots in tool magazine: 12, number of axes: 3, This 3s HOMAG OPTIMAT BAZ 211 VENTURE 20 was manufactured in 2006. It features a reconditioned AC motor with a holding brake and a timing belt for enhanced performance. With approximately 32,572 operating hours, this CNC Wood Machining Centre represents a valuable opportunity for high-quality woodworking capabilities. Consider the opportunity to buy this HOMAG OPTIMAT BAZ 211 VENTURE 20 CNC Wood Machining Centre. Contact us for further details. • Operating hours: approx. 32,572 h • Condition: Reconditioned (factory reconditioned) • Replaced/repaired components: Dsdpfxoyhqc Rj Ac Neun • AC motor 8.00 Nm digital with holding brake • Timing belt HTD 800-8M-30 • Adapter OMLAT–Homag spindleDefect on the C-axis.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 112 mm, CNC Wood Machining Centre manufactured in 2015. This COMEC MD JAMB 9X features a multi-head design ideal for machining door frames, including DIN-adjustable options. It includes an automatic unloading conveyor and advanced CNC control with NC CAM SUITE software, allowing for simultaneous operations across its three independent heads. Consider the opportunity to buy this COMEC MD JAMB 9X CNC Wood Machining Centre. Contact us for further details. • Heads: 3 independent CNC-controlled heads (left, central, right); control can independently manage all 3 heads on all axes; allows simultaneous identical or different operations • Left and right heads: • 1 cutting/drilling unit per head with automatic pneumatic inclination of saw blades and drill groups • 2 counter-rotating horizontal electro-spindles for milling • 1 milling and mortising electro-spindle • Special sleeve for slotting on the lower side of the workpiece • Vertical units: • 1 vertical electro-spindle for milling • 1 vertical electro-spindle for drilling seats for metal clips • 1 vertical electro-spindle with special drilling head (5 drills arranged at 90°) • Workholding/benches: Duedpfxoyhn Hae Ac Nen • Workpiece holding bench divided into 4 elements, adjustable on ball-rail guide system • Automatic locking, unlocking, and positioning controlled by the central head (CNC-controlled) • Control and software: • CNC control with NC CAM SUITE software • CAD/CAM: TPAED132 with 3D workpiece visualization, integrated movement optimizer, and dedicated post-processor • Safety: • Full perimetral safety enclosure • CE compliant Additional equipment • Automatic unloading conveyor • Chip evacuation conveyor • Special loading benches for fully assembled door jambs

Condition: good (used), Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Duodoyg Iq Nopfx Ac Nen Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 2400 x 2200 h Overall dimensions - profiling machine : mm 2900 x 1400 x 1800 h Total weight kg 2900

Condition: good (used), Weeke CNC machining centre model BHP 200 Dsdpfxsyg Ehlo Ac Neun Nesting worktable 3700 x 1550 mm HSK milling unit 12 kW, liquid cooling, 1250-24000 rpm 4th axis, 360° Flex 5 aggregate interface Blow-off nozzle on the tool Automatic tool changer with 14 positions 8 stops on the table Vertical drilling unit with 10 spindles Saw aggregate Horizontal drilling aggregate with 4 spindles Laser for suction cup positioning Tool length control

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 5,540 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 350 mm, number of axes: 5, This 5-axis FORMAT4 Profit H500S 16.56 was manufactured in 2016. It features a large working area with dimensions X=5540 mm, Y=1570 mm, Z=350 mm, and is equipped with a 5-axis main spindle. The machine includes a drilling head with 12 vertical and 6 horizontal drilling spindles, a grooving saw unit, and a motor controlled via inverter up to 7,500 rpm. It also has two tool changers and a Becker vacuum pump. Contact us for more information about this machine. • Drilling head: Duedpfsygwxvex Ac Nen • 12 vertical drilling spindles, 32 mm grid • 6 horizontal drilling spindles, 32 mm grid (4 in X-axis, 2 in Y-axis) • Grooving saw unit arranged in X-axis • Motor controlled via inverter up to 7,500 rpm • Tool changers: 2 • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Additional equipment • 1 Becker vacuum pump

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Dujdsygn Ibopfx Ac Non Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: ready for operation (used), Year of construction: 2000, number of axes: 3, This 3-axis Colombo AM33 was manufactured in 2000. It's an automatic CNC machine designed for wooden framework, featuring an "L"-shaped structure with tenoning and profiling units at 90°. It machines pieces on both sides and includes 68mm cutters. Consider the opportunity to buy this Colombo AM33 CNC Wood Machining Centre. Contact us for more information. • Measurement: Electronic ruler Dusdeygmpqepfx Ac Non • Application: Produces complete frames and coverings • Structure: L-shaped with two units at 90° (tenoning side and profiling side) at 90° • Capability: Machines pieces on both sides Additional equipment • 68 mm cutters (tooling)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 3,000 mm, overall weight: 2,700 kg, TECHNICAL DETAILS Dedpfeyf Elzox Ac Nsun Working area X-axis: 3,000 mm Working area Y-axis: 1,000 mm Working area Z-axis: 60 mm Maximum workpiece length: 3,000 mm Minimum workpiece length: 90 mm Maximum workpiece width: 1,000 mm Minimum workpiece width: 70 mm Maximum workpiece height: 60 mm Minimum workpiece height: 8 mm Vertical electrospindle power: 4.8 HP Circular saw unit diameter: 150 mm Circular saw unit power: 2.3 HP Vertical drilling spindles: 29 Horizontal drilling spindles (X-axis): 8 Horizontal drilling spindles (Y-axis): 2 MACHINE DETAILS Compressed air: 7/8 bar Total installed power: 20 kW Machine weight: 2,700 kg EQUIPMENT Numerical control with Biesseworks software Infeed table with motorized belts (left) 2 panel clamps Outfeed table with motorized belts (right) Protection for machining head with emergency stop front mats Transfer system for panel loading and unloading with aluminium profiles Belt-driven table for panel transfer/lifting bar BiesseWorks machining programming system

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,385 mm, travel distance Z-axis: 180 mm, controller model: Xylog, milling spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis working area: 3,085 mm Y-axis working area: 1,385 mm Z-axis working area: 180 mm Programmable X-axis speed: 50 m/min Programmable Y-axis speed: 45 m/min Programmable Z-axis speed: 22.5 m/min Drilling unit Vertical spindles: 10 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Motor power: 2.2 kW Speed: 4,000 rpm Milling unit Electrospindle: 10 HP Speed: 18,000 rpm Engraving unit Motor power: 2.2 kW Speed: 6,000 rpm Worktable Number of worktables: 6 Vacuum suction cups: 18 Loading supports: 4 Vacuum pump Flow rate: 100 m³/h MACHINE DETAILS Control system: Xylog Installed power: 17/20 kW Compressed air: 6/7 bar Weight: 3,000 kg Dujdpfoyf Ekkox Ac Nen EQUIPMENT Automatic lubrication

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 110 mm, For sale is a slightly used (2023) German-made CNC machine with an automatic tool changer (ATC) - CNC Step High-Z S-1400T. Working area 1400 x 800 x 110 mm (X/Y/Z). With a tool changer 1150 x 800 x 110 mm (X/Y/Z). Spindle Spinogy X22-L-SK20 with XControl E and XControl P. In addition, I provide all the equipment that allows you to work immediately: a Dell computer and monitor, software, a vacuum pump MARPA MV-0040N, a chip extractor, 7x tool holders, a stack of tools, and other equipment. Dusdpfsyfwaksx Ac Njn I can provide training. The machine is located in Sigulda, Latvia. It is currently connected and can be tested. Additional information on request.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, overall weight: 1,700 kg, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine. • Axes: 3 CNC-controlled (X, Y, Z) • Capabilities: routing, drilling, pocketing, panel machining • Air supply: 7.5 bar • Suction air speed: 30 m/s Additional equipment Djdpfeyfnp Aox Ac Njun • Flat vacuum table with suction cups

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German Dujdoyfgzdepfx Ac Nen SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: excellent (used), Year of construction: 2019, Maximum swing range (vertical axis of the electric spindle): 1650 – 2350 – 3000 mm Vector speed (X-Y) (PRO-SPEED): 85 m/min Programmable speed in Z-axis: 30 m/min Element passage: 170 mm Multifunction device BRC-K: Technical specifications (Gr-Multif_BRC-K_2.1_N5.1-0.6) Dedpeyffh Nofx Ac Noun 1) Performance: Motor 3.6 kW (S6 - 40%) Number of poles: 2 Speed control: via CNC with frequency inverter Cooling system with fan 3) Horizontal milling spindle: Tool holder: ER25 Spindle speed: 6000–18000 rpm Rotation direction: clockwise/counterclockwise Max. tool dimensions: L1 = 151 mm / W1 = 120 mm / D = 20 mm Max. tool dimensions 2: L2 = 111 mm / W2 = 80 mm / D = 20 mm Max. machining depth: 115–75 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 11,517 h, functionality: fully functional, machine/vehicle number: 070614/B/1-407, travel distance X-axis: 7,220 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 180 mm, number of axes: 4, TECHNICAL DETAILS Working range X-axis: 7,220 mm Working range Y-axis: 1,580 mm Working range Z-axis: 180 mm MACHINE DETAILS Duedpsyfcquofx Ac Njn Number of milling spindles: 1 unit Number of controlled axes: 4 units Operating hours: 11,517 h EQUIPMENT C-axis

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, Woodworking centre Homag PROFI BOF 411/45/PM. Used condition. Dusdpfxeydqx Re Ac Nen

Condition: ready for operation (used), Year of construction: 2008, A CNC woodworking center Homag is available. Travel path X/Y/Z: 4000mm(4200mm)/1235mm/182mm, machine dimensions X/Y/Z: approx. 8000mm/5500mm/2950mm, operating hours: approx. 33226h. The machine is impact-sensitive at the terminal, and the laser shows problems with stone detection. Including spare operating equipment, chiller as well as various clamps and suction units. Documentation available. An on-site inspection is possible. Dusdpjyddz Sefx Ac Non

Condition: excellent (used), Year of construction: 2020, operating hours: 8,879 h, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,320 mm, travel distance Z-axis: 180 mm, We offer this very good SCM morbidelli m100 machining center, year of construction 2020. If you have any questions or need more information, feel free to send us a message or give us a call. Duodpfeyc Ttnex Ac Nen

Condition: used, Year of construction: 2018, Price: On request CNC machining centre SCM ACCORD 25 FX Brand SCM Type ACCORD 25 FX  Year of construction 2018 Machine no. AA10000992 Machining table dimensions 5020x1380 mm (LxW) Worktable equipped with 2 vacuum fields Worktable equipped with 2 reference lugs Including 8 reference lugs and 8 supports  Speed XY, vector 35 m/min Dodpfsycwupex Ac Nsun Movement axes Maximal speed X axis 25 m/min (pro space) Maximum speed X axis 90 m/min (pro speed) Maximum speed Y axis 90 m/min Maximum speed Z-axis 30 m/min Control unit Machine control KVARA control Windows Embedded Standard 7-64bit Hard disk storage capacity 500GB-7200rpm Microprocessor Intel Pentium-2.9GHz RAM memory 8GB-DDR4 XILOG-MAESTRO software package Including vacuum pump  Motor power 5.5 kW Pump capacity 250m3/hour Vacuum pressure maximum 0.9 bar Total dimensions 9000x4500x3000 (LxWxH) Total weight 7,500 KG.  - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: AA10000992 - Type milling table: Beam table - Vacuum pump present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS are characterized by high rigidity and maximum resolution precision, operating with full interpolation on each axis: X, Y, and Z. Digital Signal Processing (DSP) ensures digital signal processing for smooth machine operation and high machining accuracy. The plotter with a working area of 1220 × 1230 mm provides stable and precise performance. The controller’s built-in memory allows the machine to operate without the need to reload the program each time. The spindle design incorporates high-quality machine bearings, characterized by very quiet operation and increased durability. Training at the CORMAK headquarters is included with every machine. Technical specifications Spindle: 3.7 kW / 18,000 rpm, inverter-driven, air-cooled Working area: 1200 × 1200 × 210 mm Control system: DSP Programming resolution: 0.001 mm Power supply: 400 V Weight: 450 kg Machine dimensions: 2000 × 1800 × 1640 mm Table height: 715 mm Guideways: linear Drive transmission: rack and pinion (Z-axis – ball screw) Software: UCanCAM V13 software, Polish language version (optional) IMPORTANT! The machine is equipped with a G-code path memory (resume function). In the event of a failure or power outage, it resumes operation from the last point without loss of time or material. CNC Milling Machine CORMAK C1212 PREMIUM (1200 × 1200) Standard equipment Leveling feet Bolts Wrenches Training cutter set ER32 collets – 1/8 inch, 1/2 inch, and 5–6 mm Unloading and positioning of the machine are the customer’s responsibility. The power plug must be provided by the customer due to different socket types (16A / 32A). Optional equipment (net prices) Dodsycuycopfx Ac Neun UCanCAM V13 software, Polish language version – PLN 1,190.00 UCanCAM V13 PRO software, Polish language version – PLN 3,190.00 Commissioning and training at the customer’s site – PLN 3,000.00 CE-compliant safety barriers (price per side) – PLN 600.00 CE-compliant laser light curtains – PLN 6,300.00 Warranty extension by 12 months – +15% of the net machine price Warranty extension by 24 months – +30% of the net machine price Warranty extension by 36 months – +45% of the net machine price

Condition: new, Year of construction: 2026, CNC Milling router for wood C1531 ATC Technical parameters Spindle 5.5kW / 18,000 rpm inverter, air-cooled Working area 1500x3100 mm Maximum spindle height 350 mm Control DSP Software resolution 0.001 mm Dsdpsycuvqofx Ac Nsun Power supply 400V Weight 1380 kg Machine dimensions 2450 x 3800 x 2200 mm Table height 715 mm Vacuum pump 5.5 kW (optional) Vacuum pressure 440 mbar Guideways linear Drive transmission rack and pinion (Z axis – ball screw) Axis drives hybrid servo drives Software UCanCAM V13 (option) Equipment Air-cooled spindle, ATC version Hybrid servo drives Raised Z-axis gantry – 350 mm Vacuum table – 4 independent vacuum zones + T-slot table for manual fixing Tool height sensor included Tool set, collets, levelling feet, and accessories DSP control – digital signal processing Starter milling cutter set Optional equipment (net prices) UCanCAM V13 software, Polish language version – PLN 1,190.00 UCanCAM V13 PRO software, Polish language version – PLN 3,190.00 Commissioning and training at the customer’s site – PLN 3,000.00 Vacuum pump 5.5 kW – PLN 4,900.00 Vacuum pump 7.5 kW – PLN 5,600.00 CE-compliant safety barriers (price per side) – PLN 600.00 CE-compliant laser light curtains – PLN 6,300.00 Warranty extension by 12 months – +15% of the net machine price Warranty extension by 24 months – +30% of the net machine price Warranty extension by 36 months – +45% of the net machine price Unloading and machine placement are the customer’s responsibility. Power plug on the customer’s side due to various 16A / 32A sockets. On-site commissioning of CNC routers available upon request, with individual pricing.

Condition: new, Year of construction: 2026, PREMIUM models feature high rigidity and maximum resolution precision, operating in full interpolation across the X, Y, and Z axes. A high-quality CNC milling router designed for subtractive machining, suitable for numerous industries such as industrial, electronic, welding, woodworking, and advertising. These are efficient and precise machines equipped with user-friendly CNC control systems. Optionally – latest UCanCAM V13 software. Technical parameters Spindle 5.5kW / 18,000 rpm inverter, air-cooled Working area 1500x3000 mm Maximum spindle height 350 mm Control DSP Software resolution 0.001 mm Power supply 400V Weight 1380 kg Machine dimensions 2450 x 3800 x 2200 mm Table height 715 mm Vacuum pump 5.5 kW (optional) Vacuum pressure 440 mbar Guideways linear Drive transmission rack and pinion (Z axis – ball screw) Axis drives hybrid servo drives Software UCanCAM V13 (option) Equipment Air-cooled spindle, PREMIUM version Hybrid servo drives Raised Z-axis gantry – 350 mm Vacuum table – 4 independent vacuum zones + T-slot table for manual fixing Tool height sensor included Tool set, collets, levelling feet, and accessories DSP control – digital signal processing Starter milling cutter set Unloading and machine placement are the customer’s responsibility. Dsdpjycupwsfx Ac Nsun Power plug on the customer’s side due to various 16A / 32A sockets. On-site commissioning of CNC routers available upon request, with individual pricing.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, spindle motor power: 11,000 W, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2009. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 25 vertical and 6 horizontal spindles, and a 5-axis electric spindle with 11 kW power. The machine offers high travel speeds (X/Y: 100 m/min, Z: 30 m/min) and a total installed power of 35.7 kW. Consider the opportunity to buy this Biesse Rover C9.50 CNC processing center. Contact us for more information about this machine. • Spindles: 25 vertical, 6 horizontal • Tool changers: Revolver type (8 positions), chain changer Dodpfx Acsych Dzs Noun • Main spindle: 5-axis, 11 kW, HSK F63 • Travel speed: X 100 m/min, Y 100 m/min, Z 30 m/min • Installed power: 35.7 kW

Condition: ready for operation (used), Year of construction: 2020, number of axes: 5, This 5-axis BIESSE ROVER A 1232 was manufactured in 2020, featuring a CNC Wood Machining Centre with X, Y, Z linear axes, a B axis tilting at ±150°, and a C axis with continuous 360° rotation. If you are looking to get high quality wood working capabilities consider the BIESSE ROVER A 1232 machine we have for sale. Contact us for more information. • Axis configuration: • Linear axes: X, Y, Z • B axis: ±150° (tilting) • C axis: 360° continuous rotation Dsdeyazg Repfx Ac Njun

Condition: ready for operation (used), Year of construction: 2002, This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine. • CNC designed for wood beam processing • Maximum incoming beam length: 13,500 mm • Maximum outgoing beam length: 12,000 mm • Maximum working section: 440 mm × 240 mm • 2 independent clamps for transport and positioning (“two-hand” system) • Circular saw unit, Ø 750 mm, 4 axes • Universal milling unit with double output, 4 axes • Lower vertical drilling unit with multi-purpose support Dusdpeyaq Dxefx Ac Njn • Horizontal drilling unit with multi-purpose support, tilting • Long horizontal chain saw unit, 700 mm, with counter-support system • Includes tool change equipment • Independent control panel • CE compliant Additional equipment • Loading area with 7 motorized transverse chains • Unloading area with 6 arms for parking and storage of parts