Natuko & Redes

Condition: used, Vibrating Chute Jöst *1x Dim: length 2000 mm - width 800 mm, Driving with two pieces vibration motors of each 1,7 kW. *1x Dim: length 1800 mm - width 800 mm, Driving with one vibration motor 0,83 kW. incl. Steel frame. Iedeyv Dbqspfx Ahvetd

Condition: used, Screening machine Böhringer 12,5/50-1 Itodpfeyv Dbkex Ahved

Condition: used, Vibrating Chute Cyrus Itjdpfeyv Dbdex Ahvod

Condition: used, Lenoir Electro Magnetic Conveyor Belt Ijdpfxeyv Da To Ahvetd

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode Itjdoyv Da Hopfx Ahvod - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 1,500 rpm, spindle motor power: 5,500 W, controller manufacturer: FANUC, controller model: CE, number of axes: 2, This Pinacho Smart Turn 310 / 2000 was manufactured in 2003. A robust horizontal turning machine featuring a Fanuc CE control, spindle speed range of 30-1500 rpm, and a spindle bore of 80 mm. It offers a swing over bed of 530 mm and a maximum length of 2000 mm. If you are looking to get high quality turning capabilities consider the Pinacho Smart Turn 310 / 2000 machine we have for tact us for more information. Machine Benefits Technical Machine Benefits Isdpsyv Dayjfx Ahvstd • Spindle nose: camlock no8 • Chuck diameter: 300 mm • Swing over carriage: 475 / 315 mm • Maximum length: 2000 mm Extra Information Machine still under power

Condition: used, Steinert Electro Magnetic Conveyor Belt Itjdpfx Ahsyv Dateved

Condition: used, Screening machine Cyrus 10/20-1 Itedpfx Ahsyv Damjvsd

Condition: used, Screening machine  Jöst 15/60-2 Surface: 6000 x 1500 mm - 2 Deck Screen opening Upper Deck:  [] 35 mm Screen opening Lower Deck: [] 20 mm Driving: E-motor 11 kW Iodpfxjyv Dago Ahvetd

Condition: used, SBM Austria Screening machine with discharge conveyor Iodpfoyv Daaox Ahvjtd

Condition: used, Belt Conveyor SBM Austria Isdpsyv A U Njfx Ahvstd

Condition: used, Metso/Lokomo jaw crusher with hopper and vibrating chute Itodpfxeyv A U Ao Ahvsd

Condition: used, Screening machine Mogensen Sizer SH1546 Iodpfoyv A Uvsx Ahvotd

Condition: used, Vibrating Chute SBM Austria 2000-1400 Iedsyv A Upopfx Ahvotd

Condition: good (used), functionality: fully functional, Year of construction: 2024, operating hours: 2,825 h, machine/vehicle number: SF202403259, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX, laser source model: MFSC6000, laser hours: 2,825 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, table length: 3,050 mm, table width: 1,550 mm, working length: 3,000 mm, working width: 1,500 mm, positioning speed: 200 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 700 kg, input voltage: 380 V, input current: 96 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 7,000 kg, total length: 8,500 mm, total width: 2,300 mm, total height: 2,300 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, For sale due to purchase of a more powerful laser. Testing possible. Itsdjyv A Uiepfx Ahved

Condition: refurbished (used), Year of construction: 2002, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Completely overhauled in 2026 • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle Morse taper 4 • Infinitely variable speed adjustment • Stepless quill feed • Thread cutting device • Two 18 mm T-slots each on the machine base at rear and left • Machine lamp • Central lubrication • Table surface machined all around • Safety guard on drill • Coolant system Dimensions and Travel Tool holder: MT 4 Column diameter: 195 mm Table dimensions: 1200 x 750 mm Number of T-slots: 5 T-slot spacing: 125 mm Quill stroke: 220 mm Column stroke: 450 mm Distance, spindle nose — min. 40 mm to top of table: max. 710 mm Distance, spindle nose — min. 840 mm to base plate: max. 1510 mm Drilling radius: min. 540 mm max. 1590 mm Work table height: 900 mm Machining Data Drilling capacity (solid): St 60 up to Ø 45 mm GG 22 up to Ø 55 mm Tapping: St 60 up to M36 GG 22 up to M45 Main Spindle Drive AC motor, frequency-controlled Power: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: up to 250 Nm, constant across 15 – 200 rpm Feed Drives Infinitely variable feed: 0.02 – 0.7 mm/rev Iodpfxjyv A Ucs Ahvotd Feed force: 12,000 N Electrical Data Operating voltage / freq.: 400 V / 50 Hz Control voltage: 24 V Total connected load: 9.3 kVA Weight DANUFLEX 145 (without packaging) With 750 x 1200 mm table: 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Condition: used, Steinert Electro Magnetic Block Isdpfx Aeyv A T Sshvjtd

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,050 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis Johnford SV-41 was manufactured in 2010. It features a maximum spindle speed of 15,000 rpm and a work envelope of 1050 x 610 x 510 mm. The machine is equipped with a 40 taper for versatile tooling options. If you are looking to get high-quality machining capabilities, consider the Johnford SV-41 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: 40 taper Ijdpsyv A Txjfx Ahvotd

Condition: new, Year of construction: 2026, Z-MaT U320 5-Axis Simultaneous Machining Center Control: ZMATROL 5-Axis Simultaneous, 15" LCD screen (Optional: Siemens ONE, 15" LCD screen) Travel (X/Y/Z): 500/500/400 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed rate: 1-10,000 mm/min Spindle Spindle speed: 24,000 rpm, built-in Spindle taper: BT30 Spindle motor: 3.7/5.5 kW Air blast through spindle Spindle air curtain Spindle oil cooler Tool changer: 21-position disc Max. tool length: 200 mm Max. tool diameter: 60/100 mm Table Table diameter: Ø 320 mm Max. workpiece diameter: Ø 320 mm Max. table load: 80 kg T-slot (width x number x pitch): 14H8 x 8 x 45° Distance from spindle center to table surface: 100-500 mm A-axis swivel travel (tilt): ±115° C-axis rotation: 360° Max. rapid traverse A/C-axes: 100/130 rpm A/C-axis encoders Standard Accessories End of operation lamp, 3-color status indicator Electronic handwheel (MPG) Itedpfxsyv A Tro Ahvjd Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air-purged (XYZ) Automatic tool changer Air gun Coolant gun Coolant tank Coolant flush system (chip flushing) Full enclosure Transformer: 400V, 50Hz Electrical cabinet heat exchanger Automatic power-off Leveling bolts and blocks Toolbox CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 1800 x 3270 x 2510 mm Machine weight: approx. 4,300 kg Subject to prior sale and errors excepted Extensive automation options available

Condition: used, 2 Farben Offsetdruckmaschine / 2 Color Sheet-Fed Offset Press PM-QM46-2 N+P Ijdpfx Ahoyv A S Ujvotd Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2005, operating hours: 12,621 h, cutting width (max.): 76 mm, Equipment: compressor, documentation/manual, safety light barrier, Perfecta 76 UC 2005 program number of cuts:108.000 Isdpjyv A Suefx Ahvjtd German language program, German language book.

Condition: used, Bakker Magnetics Permanent Magnetic Block Neodymium Iedpfjyv A Shex Ahvotd

Condition: used, Screening machine Flämrich for fine materials Itodpeyv A Sbofx Ahved

Condition: good (used), functionality: fully functional, Year of construction: 2008, Equipment: documentation/manual, safety light barrier, Hydraulic Press Brake Isdpfjyv A R Rex Ahvotd Make: TRUMPF Model: TruBend 5050 Year: 2008 Technical Data Manufacturer: TRUMPF Model: TruBend 5050 Year of manufacture: 2008 Working length: 1275 mm Press force: 50 t Clear throat: 1040 mm Stroke: 215 mm Throat depth: 410 mm Installation height: 385 mm Working height: 1085 mm Rapid traverse Y-axis: 200 mm/s Y working speed: 1-20 mm/s Y return speed: 220 mm/s Dimensions LxWxH approx.: L 2.20 x W 1.80 x H 2.40 m Weight: approx. 4.9 t Equipment: - Control: TRUMPF TASC 6000 - Controlled axes: X, R, Z1, Z2 - 2 movable support arms - Pneumatic die shifting - Hydraulic tool clamping (top with LED display + bottom) - Lasersafe light curtain (front) - Upper tool OW202/K 28°/R1, H 120mm, L = 1,275 mm, segmented - Lower tool EV/S-W12, 84°/R1, H 100mm, L = 1,275 mm, segmented - Documentation including service manuals All information provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Wagner Electro Magnetic Conveyor Belt Itjdpfjyv A R Djx Ahvsd