STWD Roman Bilecki

Condition: excellent (used), Year of construction: 2019,

Condition: excellent (used), Year of construction: 2011,

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Lsdpfx Aj Aba Rgelbsah Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: excellent (used), Year of construction: 1999, 36 filter bags dust extraction duct height: 7.5 m external dimensions of the dust extraction duct: 270 x 150 cm turbine power: 11 kW fire extinguisher automatic hydraulic sawdust feeding system for the briquetting machine bag shaking mechanism briquetting machine motor power: 4 kW Lasdpfx Asz Spuwjlbeh year: 1999

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Lasdpfez R Sulsx Albjh Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available.

Condition: used, Year of construction: 2009, Control system for dust extraction systems, with slide gate control including 7 motorized shut-off slide gates: 4 units with a diameter of 140 mm, 3 units with a diameter of 120 mm. Ledpfxez R Dupo Albjah Storage location:

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total width: 5,000 mm, Silo for sawdust. Lajdpoz Ranfefx Albjh

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Filter capacity 14,5 m² Number of dust containers 3 St. Laodpfx Alsz I Uc Dobjh Weight ca. 500 kg 200 mm

Condition: new, Year of construction: 2026, Airflow capacity 15,000 m³/h Motor power 18.5 kW (25 HP), 3,000 rpm Air velocity 40 m/s Filter dimensions Ø160 x 940 mm Number of filters 117 units Filtration area 59 m² Chip collection 2x big bag (total: 2,500 liters) Ljdpfez I Sdljx Alboah Inlet diameter Ø400 mm Dimensions 1,670 x 4,000 x 3,630 mm Weight 1,150 kg Operating temperature -20°C to 40°C

Condition: new, Year of construction: 2026, Airflow capacity 11,300 m³/h Motor power 11 kW (15 HP), 3000 rpm Air velocity 40 m/s Filter dimensions Ø160 x 940 mm Number of filters 60 pcs Filtration area 30 m² Chip collection 2x 1250-liter big-bag (total: 2500 liters) Laodpfx Alsz I Sc Ujbjh Inlet diameter Ø355 mm Dimensions 1200 x 3310 x 3560 mm Weight 820 kg Operating temperature -20°C to 40°C

Condition: new, Year of construction: 2026, Capacity 8,900 m³/h Motor power 7.5 kW (10 HP), 3,000 rpm Air velocity 32 m/s Filter dimensions Ø160 x 940 mm Number of filters 42 units Filtration area 21 m² Chip collection Big bag (1,250 liters) Inlet diameter Ø300 mm Lsdpfx Alsz I Scuebjah Dimensions 1,210 x 2,550 x 3,520 mm Weight 540 kg Operating temperature -20°C to 40°C

Condition: ready for operation (used), Dust extraction unit complete with rotary valve, extraction fan with variable frequency control, motorized filter cleaning (shaker), electrical cabinet, Inlet: 400 mm Filter dimensions: 240 x 115 x 360 cm Capacity: approx. 10,000–12,000 m³/h Fan motor: 15 kW, 400 V, 50 Hz, 3-phase Ledsz Iz Hvjpfx Albeah Stock no.: 2002963BXA

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete Aagaard/Finnrose industrial dust extraction and filtration system, manufactured in 2006, from a wood processing company. The system is designed as a screw filter and features a complete dust extraction control system including heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Under the discharge, there is a suitable hopper with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available 6 m³ hopper on mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available by agreement Dimensions Filter tower including rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from the steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower including substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed by 31.07.2027 at the latest. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his expense and responsibility. All required specialists, lifting equipment, cranes, and means of transport must be organized by the buyer. Inspection possible by arrangement. Sale from the location in its current condition. Technical data provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 24,500 EUR Laodpsz Ik Atjfx Alboh Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Lasdpfx Alez Ikzpjbjh Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Condition: used, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,850 m³/h, intake manifold diameter: 160 mm, filter area: 8.25 m², total height: 1,950 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 3273 Extraction unit / dust extractor AL-KO Mobil-Jet 160 Used Dust extractor for extracting wood dust and chips Motor power 2.2 kW Nominal air flow rate 1850 m3/h Ledsz Ibgiepfx Albjah Minimum air flow rate 1448 m3/h Extraction inlet Ø 160 mm Negative pressure 2120 Pa Filter area 8.25 m2 Air filter category G Pneumatic filter cleaning AL-KO OPTI JET Compressed air connection 8.5 bar Chip collection container approx. 320 l Base frame without wheels Suitable for wood dust separation, residual dust content class 2 (H2), max. residual dust content 0.2 mg/m3 Type 1 (B1), suitable for extracting combustible dust in Zone 11 BG-tested, GS-tested CE marking Suitable for indoor use Electrical connection 400 V / 50 Hz, three-phase Ready to plug in, including power cable and 16 A plug Transport dimensions approx. 1700 x 800 x 1950 mm LWH Weight approx. 200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), Year of construction: 2017, No. 1 rectangular filter station with a mechanical shaker cleaning system, operating under positive pressure, with the following dimensions: Width: 3,400 mm Length: 6,600 mm Height: 7,500 mm Laedpsz Hz Htsfx Albeh Filtering surface: 396 m2 Manufactured from galvanized steel sheet, complete with: - No. 160 polyester satin filter bags, 350 g/m², Ø250 × 3,000 mm, open at both ends; - No. 320 galvanized quick-release clamps, Ø250 mm; - No. 2 filter support frames; - No. 1 electric motor, 2.2 kW – 6 pole; - No. 1 external filter housing enclosure; - No. 1 access door to the filter compartment; - No. 1 vertical access ladder to the filter compartment; - No. 2 clean-air discharge stacks complete with air sampling connections; - No. 6 braced support legs; - No. 1 dust collection hopper complete with inspection hatch; - No. 1 screw conveyor, complete with 2.2 kW – 4-pole gear motor, steel shaft and flight, bearings, and supports; - No. 1 rotary airlock valve, complete with 1.5 kW – 4-pole gear motor, steel shaft, and rubber blades; - No. 1 high-level indicator; - No. 2 transparent PVC inspection windows; - No. 1 Ø200 mm tee connection complete with anti-clogging micron vent; - New galvanized bolts, nuts, and sealing gaskets for future reassembly.

Condition: used, Year of construction: 2016, Dust extraction system Lodpfx Aljz Hwr Eobsah Manufacturer: Nestro Year of manufacture: 2016

Condition: new, Year of construction: 2025, functionality: fully functional, Fan motor power – 5.5 kW Filtration area – 19.8 m2 Laedez Hck Tspfx Alboh Number of filter bags – 21 Dimensions – 255x90x310 cm Power supply – 380V Rated capacity – 6500 m3/h Year of manufacture – 2025

Condition: new, Year of construction: 2025, functionality: fully functional, Fan motor power - 5.5 kW Filtration area - 14.15 m² Lodpfxsz Hckyo Albeah Number of filter bags - 15 Dimensions - 255x90x310 cm Power supply - 380 V Rated capacity - 6500 m³/h Year of manufacture - 2025

Condition: good (used), Year of construction: 2001, machine/vehicle number: 077359, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, volume flow: 7,500 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 7,500 m³/h, intake manifold diameter: 300 mm, filter area: 36 m², noise level: 76 dB, actuation type: electric, total height: 4,000 mm, total length: 1,600 mm, total width: 2,250 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Due to the purchase of new equipment to expand our machinery, this functional dust extraction unit is for sale. It can be inspected up to week 42; after that, we will dismantle it. Lajdpfx Asz Erfdelbsh The impeller was replaced in October 2025 – a parts invoice is available.

Condition: used, Year of construction: 2008, machine/vehicle number: 1001877, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 14,100 m³/h, intake vacuum (max.): 450 mbar, suction capacity: 14,100 m³/h, intake manifold diameter: 450 mm, filter area: 125 m², actuation type: electric, total height: 5,800 mm, total length: 2,100 mm, total width: 2,100 mm, overall weight: 2,000 kg, Equipment: CE marking, documentation/manual, dust extraction, Schuko Ecovar extraction system, 14,000 m³/h – complete and operational Complete Schuko Ecovar industrial extraction system for sale, including a 22 kW main fan, a 7.5 kW transport fan, and the corresponding control system. The system is currently in operation and can be inspected while it is running. Due to an expansion of our capacity, this system will be replaced by a larger, new Schuko extraction system. An interesting complete system for companies looking for a powerful used extraction/filtration system with a capacity of approximately 14,000 m³/h. Key features Lodez Egzmepfx Albeah * Capacity: approx. 14,000 m³/h * Filter area: 125 m² * Main fan: 22 kW * Transport fan: 7.5 kW * 100 filter hoses * Electric/pneumatic filter cleaning * Antistatic filter material * Includes the corresponding control system * Complete system * Currently in use and can be inspected while running Technical data for the filter system Brand: Schuko Type: Ecovar 04 22020/25/125, through-flow Design: overpressure, static Number of elements: 1 Material extraction: transport fan Filter material: antistatic polyester needle felt, BIA, AWN 05 Diameter of filter hoses: Ø 160 mm Length of filter hoses: 2,500 mm Number of filter hoses: 100 pieces Filter fabric area: 125 m² Filter cleaning: electric/pneumatic Weight: approx. 2,000 kg Dimensions of the filter system (L × W × H): approx. 2,100 × 2,100 × 6,000 mm Main fan Brand: Schuko Type: S 450/O/L2 Connection diameter: Ø 450 mm Capacity: 14,100 m³/h at 3,412 Pa Motor power: 22 kW Drive: direct Transport fan Brand: Schuko Type: TSK 250/O/S4 Connection diameter: Ø 250 mm Capacity: 4,500 m³/h at 3,344 Pa Motor power: 7.5 kW Drive: indirect Design: reinforced Condition and availability The extraction system is currently operational and is being sold only because it is being replaced by a new Schuko system with a larger capacity. This provides the opportunity to inspect the system while it is running before dismantling. Availability upon consultation. Dismantling and transport upon consultation. Serious interest? Please feel free to contact us for additional information, photos, technical data, or to arrange an appointment to inspect the system while it is running.

Condition: ready for operation (used), Extraction system consisting of a filter unit, rotary valve airlock, and a fan. Ledpfjz Dtmyox Albsah Filter data: Filter base area approx. 2000 x 2000 mm Filter unit height approx. 5000 mm Filters partially defective Return air duct Pipes from the filter to the fan Accessories: Rotary valve airlock approx. 1800 mm Fan: Output unknown (previously used to extract dust from a four-sided planer) Price ex works for self-dismantling Further technical data available upon request All information without guarantee

Condition: new, suction line Lajdpfjz Dp E Sox Albjh

Condition: used, functionality: fully functional, GGE Minisilos 7.5kw dust extraction unit Power: 7.5 kW Laedpfx Aljz Ahw Tjboh Filter bag cleaning system 36 filter bags Filter bag diameter: 160 mm Filter bag length: 2000 mm Dust collection hopper with a capacity of 4.84 m³ Air recirculation to the hall is possible.

Condition: good (used), Holtrop & Jansman MSO-250 Dust extraction system with negative pressure Connection diameter: 250 mm Capacity: approx. 4,000 m³/h at 2,000 Pa Motor power: 4 kW Fire protection flap Filter hoses: already replaced with an antistatic version. Lajdezzmadepfx Albsh