Central Catalana Maquinaria, S.a.

Condition: used, Bevel edge router EF Kantenfrees Equipped with cutter heads 500W Dedpfxox Eicpe Ab Tswf 230V

Year of construction: 1994, condition: ready for operation (used), General Data Machine weight 12000 kg Dwsdpfxsx D Iaqe Ab Tsf Control Unit Brand HEIDENHAIN Model TNC415 This 3-axis Zayer ZF 2000 gantry milling machine was manufactured in 1994. It features a robust table clamping surface of 2000 × 800 mm, with longitudinal, transverse, and vertical travels of 1703 mm, 803 mm, and 863 mm respectively. It supports a maximum table load of 6000 kg and offers rapid traverse rates up to 15,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Zayer ZF 2000 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Dedpfxjx D S Eke Ab Tjwf Application Types Milling

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Measurements height 4900 mm Machine weight 51000 kg Control Unit Dwodpfxox D Hcwe Ab Tjf Brand SIEMENS Model SINUMERIK 840D Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 800 kg Dedpsx D Ha Nsfx Ab Towf Main Drive Number of axis 3 Additional Equipment Supplied with instruction and user manuals This 3-axis BARCENAS CNC SW1325V was manufactured in 2019, designed for precision CNC milling. Ideal for detailed and complex machining tasks, this machine ensures reliability and efficiency in operation. If you are looking to get high-quality milling capabilities, consider the BARCENAS CNC SW1325V machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2000, condition: ready for operation (used), Control Unit Brand Andronic Model 2000 Main Drive Spindle speed range 25000 rpm Number of axis 3 Additional Equipment Scraper belt conveyor with discharge height 1200 mm Temperature stabilization switch cabinet with high-performance cooling unit Dedpox D Dymefx Ab Tswf This 3-axis MIKROMAT 8V gantry milling machine was manufactured in 2000. It features an Andronic 2000 control system, automatic tool change with a 16-position ATC, and a high-speed spindle capable of up to 30,000 rpm in short bursts. Equipped with a BLUM laser system for precise tool monitoring and measurement, and a scraper belt conveyor by Knoll for efficient chip removal. Consider the opportunity to buy this MIKROMAT 8V gantry milling machine. Contact us for more information about this machine. Application Types Milling

Year of construction: 1995, operating hours: 33,912 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model 407 Dodpfx Aex D Rd Eob Tewf Main Drive Spindle speed range 4000 rpm Number of axis 3 Additional Equipment Cooler in the electrical cabinet This 3-axis Correa FP30 was manufactured in 1995. It features a table size of 3000 x 1250 mm, a rotary table Ø1000 mm with tailstock, and a main spindle speed of 4000 rpm. The machine includes a Heidenhain 407 control and an auxiliary head at 90 degrees. If you are looking to get high-quality milling capabilities, consider the Correa FP30 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1964, condition: used, MILLING MACHINE Djdpfx Abjx Dzbbo Tswf

Year of construction: 2005, condition: ready for operation (used), A Deckel Maho (DMG) CNC 5-axis milling machine is available. Travel range X/Y/Z: 750 mm/600 mm/520 mm, table dimensions X/Y: 700 mm/500 mm, max. table load: 350 kg, speed: 18,000 rpm, tool holder: HSK-63A, tool positions: 60, rapid traverse: 50m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 6500mm/3500mm/3500mm, weight: approx. 8500kg, control: Heidenhain MillPlusIT, operating hours: approx. 80,640h, spindle hours: approx. 33,873h. The table is slightly jerky. Documentation available. On-site viewing is possible. Expected to be available from March 2026. Dodpfox Dm Efox Ab Tewf

Year of construction: 2007, condition: ready for operation (used), A Deckel Maho (DMG) CNC 5-axis milling machine is available. Travel range X/Y/Z: 500 mm/420 mm/380 mm, tool positions: 30, speed: 18,000 rpm, max. workpiece weight: 200 kg, table diameter: 650 mm, positioning accuracy: +/-0.015 mm, rapid traverse: 24 m/min. Machine dimensions X/Y/Z: approx. 2500 mm/3000 mm/2500 mm, weight: approx. 5000 kg, control: Heidenhain MillPlusIT, operating hours: 52590 h, spindle hours: 22009 h. The rotary encoder of the machine fails sporadically. Documentation available. On-site viewing is possible. Dedpfxsx Dm D Uj Ab Towf

Year of construction: 1990, condition: ready for operation (used), Offered is a Deckel FP 4 AT CNC milling machine year 1990. Control: Dialog 11. Coolant system: 70l, tool holder: SK40, tool changer: 20-fold, travels X/Y/Z: 560mm/500mm/390mm, table size X/Y: 900mm/530mm, spindle speed: up to 4000rpm, rapid traverse: 4000mm/min. Machine weight: approx. 2890kg. Tool changer defective. Viewing is possible by arrangement. Dodjx Dm Dujpfx Ab Tewf

Condition: used, 1 piece copy and lock milling machine ROTOX KF347 according to pictures and inspection Dimensions (L/W/H): 130x80x170 cm Condition: used Payment method: advance payment by bank transfer Storage location: production hall Shipping: Collection only – no shipping offered for this item! Dodsx A Awnspfx Ab Towf

Year of construction: 2002, condition: ready for operation (used), Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes. Dedpfx Absx Aupio Towf

Year of construction: 2023, condition: used, machine/vehicle number: 23071429, HEIDENHAIN control, clamping table approx. 3,200x1,000 mm, travel (X/Y/Z): approx. 3,000/1,500/1,300 mm, 24-position tool changer, industrial cooling EATA EL3-R5/VERT, hydraulic unit REXROTH, chip conveyor URRETXU MAQ 1429, year of manufacture: 2023, serial no.: PL020644, safety enclosure. Djdpfx Absx Aklto Tswf

Year of construction: 2023, condition: used, machine/vehicle number: 23091433, HEIDENHAIN control, clamping table approx. 1,000x4,200 mm, travel (X/Y/Z): approx. 4,000/1,500/1,300 mm, 24-position tool changer, URRETXU MAQ 1433 chip conveyor, year of manufacture: 2023, serial no.: PL020646, EATA EL3-R5/VERT industrial cooler, year of manufacture: 2023, serial no.: 31842, REXROTH hydraulic unit, safety enclosure Dedpfxex Akl Ho Ab Towf

Year of construction: 2018, condition: used, machine/vehicle number: 7.F1/105-16 38204, 1 refrigerated dryer Djdpjx Akhzefx Ab Towf

Year of construction: 2023, condition: used, machine/vehicle number: 23051428, HEIDENHAIN control, clamping table approx. 850x2,700 mm, travel paths (X/Y/Z): approx. 2,500/1,000/1,100 mm, 24-position tool changer, chip conveyor URRETXU MAQ 1421, year of construction: 2023, serial no.: PL0000073, industrial cooling EATA EL3-R5/VERT, year of construction: 2023, serial no.: 32011, REXROTH hydraulic unit, safety enclosure Dwedpfx Aex Aklyjb Tef

Condition: new, functionality: fully functional, A new control system for your machine – modern servos – new controller – up to 6 axes The Retrofit Kit V2.0 enables the existing scale of Maho 600 Series industrial machines to continue being used. Previously, digital operation required feedback from the motor to the servo amplifier. With the analog system, position feedback is routed to the CSMIO. This means that the motor encoder is now only required for the servo drives, no longer for the CNC controller. As a result, pitch errors can be eliminated thanks to the direct measurement approach. The kit for the Deckel Maho 600 Series includes: - 1 x Delta B3 Controller with 1500-watt output - 1 x Delta B3 Motor 1500 watts with brake - 2 x Delta B3 Controllers with 1000-watt output each - 2 x Delta B3 Motors 1000 watts - 2 x 5-meter encoder cables - 2 x 5-meter motor cables without brake - 1 x 3-meter encoder cable - 1 x 3-meter motor cable with brake - 2 x B3 plug-in boards without brake incl. 3 patch cables per board - 1 x B3 plug-in board with brake incl. 3 patch cables per board - 1 x BIG IO interface module - 1 x Maho Deckel & Co connection board - 2 x encoder boards - 1 x Digital Input 12-23 board - 1 x patch cable set - 1 x CSMIO IP-A controller - 1 x milling SIM software with customized interface - 1 x 24 V 10A power supply - 1 x power distribution unit with LED display - 1 x C2000 4.0 kW frequency inverter Dwedpoxz Dkgofx Ab Tof We are also happy to provide you with a quote for Deckel, Mikro, etc.

Condition: ready for operation (used), Year of construction: 1986, Immediately available from location: Fully automatic milling machine Busch Dwjdoxzdkyjpfx Ab Tof Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Machining length up to 6100 mm Automatic material feed Automatic infeed Drive 5.5 kW Accessories: support tables Tool holders, milling cutters Coolant system Digital readout Weight: 4 t Price: EUR 3,750.— plus VAT, ex location.

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Dedpfx Aboxyk Upe Tjwf

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Dwsdpfx Asxyk Ucsb Tjf

Condition: ready for operation (used), Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment. Dwjdpfx Aboxyk U As Tsf

Condition: new, Year of construction: 2002, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 13347, Brand new showroomodel: Technical specifications: · Automatic feeds and rapid traverses adjustable by DC motor and PLC control · Hardened and ground main spindle gears · Hardened and ground slideways with central automatic lubrication · Automatic gearbox lubrication, main spindle equipped with electric brake · All controls on one side of the machine · Hardened and ground ball screw spindles for precise movement · Automatic hydraulically operated tool release and automatic clamping · for longitudinal, transverse, and vertical movement · Clamping surface (hor) fixed angle table 800x400 mm · 7 T-slots 14mm, 50mm center-to-center · Max. workpiece weight 400 kg · Mounting surface (vert) base slide 1000x260 mm · 5 T-slots 14mm, 50mm center-to-center 50 mm Longitudinal travel of base slide/automatic 500 mm Cross travel of main spindle slide/automatic 350 mm Vertical travel of base slide/automatic 400 mm Clamping surface (hor) universal tilting rotary table 700x400 mm Hor. rotation of universal table 360° Tilt left-right universal table 30° Tilt front-back universal table 30° Number of automatic feeds: infinitely variable Automatic longitudinal and cross feed range: 10-1000 mm/min Automatic vertical feed range: 10-1000 mm Rapid traverse, longitudinal and cross travel: 1500 mm/min Rapid traverse, vertical travel: 1500 mm/min Speed range: vert./hor. Spindle 50-2500 rpm Dwedpfsxxkn Hex Ab Tef Number of speeds: 18 Main spindle motor power: 4 kW Feed motor power: 2.2 kW Hydraulic motor: 0.8 kW Lubricator motor: 0.04 kW Cooling pump: 0.04 kW Power supply: 380 V 3 Ph 50 Hz Machine dimensions: 1020 x 1640 x 1710 mm Machine weight: 2600 kg · Universal 2-sided tilting swivel table · Fixed angle table · 3-axis digital readout: Yeef GSW3 · Cooling system · 24 V work light · Vertical head with quill and spindle feed

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake Dsdpexwvrusfx Ab Towf - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/500mm, speed: 10000rpm, tool holder: BT-40, tool stations: 24, rapid traverse: 36m/min, table dimensions X/Y/Z: approx. 800mm/450mm, max. table load: 450kg, repeat accuracy: 0.003mm, positioning accuracy: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2800mm, weight: approx. 3500kg. Documentation available. An on site inspection is possible. Dodoxwn I Iepfx Ab Tjwf