Michael Girstenbrei RECYCLING GmbH

Condition: used, Shredder / Shredders Hodpfxj Afdine Apdow Manufacturer: HERBOLD Type: SMS 45/100-H5-2 Semi-open 5x2 knife rotor, 2 stator knife rows. The machine is equipped with a replaceable third bed knife (deflector) to handle thick-walled materials. Inlet hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing divided in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Rotor diameter = 400 mm Rotor width = 700 mm Hodpe Admcuefx Apdjw Number of rotor blades = 3 Number of stator blades = 2

Condition: used, machine/vehicle number: 14088, Rotor diameter = 800 mm Rotor width = 1500 mm Rotor blades = 9 rows Stator blades = 4 pieces Drive power = 200 kW Hjdpfx Ape Admcnedsw

Condition: used, machine/vehicle number: 10460, Rotor diameter = 400 mm Hodpfx Ae Admchepdew Rotor width = 600 mm Number of rotor blades = 5 Number of stator blades = 2 Drive power = 30 kW

Condition: used, machine/vehicle number: 14002, Unreconditioned housing GSH 800/1200. Will soon be reconditioned and can then be used as an exchange housing. Hedpfxo Admcbo Apdjw Wet version.

Condition: used, machine/vehicle number: 11635, Cutting mill housing with rotor Rotor blades = 3 Hjdpfx Ae Aa D D Uepdow Stator blades = 2 Opening: 500 x 300 mm

Condition: used, machine/vehicle number: 11862, Rotor diameter = 320 mm Hedps Aa D D Isfx Apdow Rotor width = 440 mm Inlet = 450 x 300 mm Rotor knives = 3 rows Stator knives = 2 pieces Drive = 7.5 kW

Condition: used, machine/vehicle number: 14153, Rotor blades = 3 Stator blades = 3 Hsdpfxj Aa D Dzj Apdow Drive power: 4 kW

Condition: used, machine/vehicle number: #14200, Rotor diameter: 500 mm Rotor width: 1000 mm Number of rotor blades: 96 Number of stator blades: 48 Hsdez Svb Rjpfx Apdsw Inlet cross-section: approx. 500 x 1000 mm Drive motor: 45 kW

Condition: used, machine/vehicle number: #14199, Rotor diameter: 800 mm Rotor width: 1000 mm Hjdpfx Aez Svb Dopdjw Number of rotor blades: 7 Number of stator blades: 3 Inlet cross-section: approx. 900 x 1000 mm Drive motor: 110 kW

Condition: used, machine/vehicle number: #14198, Rotor diameter: 800 mm Rotor width: 1000 mm Number of rotor blades: 7 Number of stator blades: 3 Inlet cross-section: approx. 900 x 1000 mm Hjdjz Svbwspfx Apdsw Drive motor: 132 kW

Condition: used, Year of construction: 1973, operating hours: 3 h, functionality: fully functional, machine/vehicle number: GM900, total length: 17,100 mm, total height: 4,340 mm, total width: 3,363 mm, overall weight: 7,000 kg, frame height: 4,340 mm, frame width: 2,780 mm, For sale is a cross-flow shredder mounted on a VOEST GM900 frame. The cross-flow shredder can be operated with two or three chains. The shredding chamber is open and can be equipped with different grating grids. After shredding, a permanent overband magnet is installed. The system control was newly purchased and installed. The system can be disassembled for transport. Hedjz Sp Ecepfx Apdew

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. It features a robust construction, a proven VEM 7.5 kW motor, and a three-phase 400 V power supply. Hedpfx Ajz Sk Duepdsw The machine has a large feed hopper, convenient service access, and a control cabinet with an emergency stop button. The installed low-speed three-phase motor provides high shredding power while maintaining stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Performance suitable for medium and large injection molding machines • German quality • Robust frame and blade construction In very good condition, mechanically inspected, and ready for operation.

Condition: used, machine/vehicle number: K12936, Rotor diameter: 340mm Rotor width: 520mm Hodpfx Aoz N Iyyopdsw Rotor blades: 5 rows Stator blades: 2 rows Inlet cross-section: approx. 340 x 520mm Drive motor: 22kW

Condition: used, machine/vehicle number: K12895, Rotor diameter: 260mm Rotor width: 410mm Rotor blades: 5 rows Hsdpfx Ajz N Iytepdow Stator blades: 2 rows Infeed cross-section: approx. 2 pieces of 140 x 40mm Drive motor: 7.5kW Vacuum system for drawing in film edge strips

Condition: used, machine/vehicle number: K12805, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 5 rows Hodsz N Iymepfx Apdew Stator blades: 2 rows Infeed cross-section: approx. 2 pieces, 10 x 120 mm Drive motor: 11 kW Mechanical infeed device for film edge strips

Condition: used, machine/vehicle number: K12804, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 260 x 410 mm Hjdpfx Aez N Iygopdsw Drive motor: 11 kW Wear-resistant design of the grinding unit.

Condition: used, machine/vehicle number: K11739, Rotor diameter: 150 mm Rotor width: 200 mm Rotor blades: 3 rows Hsdez N Iyaepfx Apdew Stator blades: 2 rows Inlet cross-section: approx. 300 x 200 mm Drive motor: 2.2 kW

Condition: used, machine/vehicle number: G11762, Rotor diameter: 200mm Rotor width: 100mm Hedpfx Apjz N Ix Nodjw Rotor blades: 32 rows Stator blades: 1 row Inlet cross-section: approx. 90 x 10mm Drive motor: 4.0 kW Mechanical feed device for extruder strands

Condition: used, functionality: fully functional, overall weight: 2,800 kg, total length: 2,750 mm, total width: 1,500 mm, total height: 1,800 mm, input voltage: 400 V, rotor diameter: 730 mm, rotor width: 600 mm, Hammer mill with swing hammers for secondary size reduction of cable scrap, aluminium, e-scrap and non-ferrous metals. Technical data: Hedpfsz I I Hvsx Apdjw – Rotor: hammer circle diameter approx. 730 mm, width 600 mm, rotor discs Ø 520 mm – Hammers: plate type 215 × 100 × 13 mm, bore 35 mm – Screen: replaceable perforated screen, one fitted – Drive: V-belt, ABB motor frame 225 (approx. 37–45 kW), 400 V / 50 Hz – Electrics completely renewed, new control cabinet included – Hinged upper housing – Dimensions approx. 2,750 × 1,500 × 1,800 mm incl. motor and hopper, weight approx. 2,800 kg Scope of delivery: mill with motor, belt guard and control cabinet; new complete wear part set (hammers, pins, spacer rings, unused); discharge belt conveyor with gear motor. Nameplate missing, manufacturer unknown. The machine runs without problems. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: used, No. 04554 Hodpfx Apoz Iav Aedew Granulator / cutting mill Alpine RO 40/63 Used Robust granulator / cutting mill for the size reduction of plastics, blown film and cables Motor power 22 kW Rotor width 630 mm Rotor diameter 400 mm Rotor knives: 5 rows with 3 knives each Stator knives: 1 row at the front and 2 rows at the rear, with 3 knives per row Maximum permissible speed of the drive shafts 560 rpm 2 inspection openings Screen hole diameter approx. 12 mm Feed opening approx. 630 x 300 mm LW Feed hopper dimensions approx. 850 x 600 mm LW The hinged screen holder allows easy screen changes and facilitates access for cleaning the machine and replacing the knives. Ideal for recycling applications (blown film, cables, plastics, etc.) and food processing (tea, spices, dried vegetables, etc.). Machine ready to plug in, incl. power cable and 63 A plug Transport dimensions machine approx. 1600 x 1500 x 1800 mm LWH, hopper approx. 1400 x 1200 x 800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, machine/vehicle number: 14062, Rotor diameter: 800 mm Rotor width: 1250 mm Number of rotor blades: 8 Hjdez H Dmvepfx Apdjw Number of stator blades: 4/5 Inlet cross-section: approx. 800 x 1200 mm Drive motor: 110 kW

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Hedjz Hxmwopfx Apdjw Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 stator knives: 2 Drive: 7,5 kW Double diagonal cut Hodpfx Apsz Hxmdodsw With roller feeder, electric control unit and sound insulation box

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Hsdpfx Aoz Hxlyspdew Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)