Dostal Maschinenbau GmbH

Condition: used, Year of construction: 2004, Functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro Machine type: Embossing and die-cutting system / Automatic sheet-fed die-cutting machine Machine number: 400018 Year of manufacture: 2004 Machine specifications Max. stroke rate per hour: 9000 cph Length without feeder: approx. 5190 mm Length with feeder: approx. 7770 mm Max. width: approx. 2400 mm Max. height: approx. 3200 mm Max. height with open feeder: approx. 3930 mm Weight without feeder: approx. 30400 kg Weight of feeder W4: approx. 3000 kg Inner clamping frame width: 820 x 1134 mm Max. die size: 816 x 1130 mm Largest cutting area: 800 x 1120 mm with Gripper edge Gripper edge adjustable from: Standard 11 – 17 mm with 13 mm wood in front of the first knife Optional 8 – 14 mm with 10 mm wood in front of the first knife Cutting line height: 23.8 mm Height of feeder stack including pallet: max. 2000 mm Height of delivery stack including pallet: max. 1700 mm Weight of feeder stack: max. 1000 kg Weight of delivery stack: max. 1000 kg Height of feeder residual stack: max. 450 mm Weight of feeder residual stack: max. 450 kg Height of delivery auxiliary stack: max. 200 mm Weight of delivery auxiliary stack: 200 kg Pallet sizes Feeder: max. 800 x 1200 mm (EURO pallet) Delivery: max. 800 x 1200 (EURO pallet) Pallet height: max. 170 mm Drive and power supply The machine is driven by a frequency-controlled motor via a flywheel. A pneumatic clutch is located between the flywheel and the machine, which has a spring-loaded brake. This clutch turns the machine on and off. The motor remains permanently switched on. The control cabinet located next to the machine contains, with a few exceptions, all the control devices for the punch and feeder. The control and signaling devices are located on the machine. They are distributed among the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection device, PLC control Connection values: 3 NAC 400 V, 50 Hz, 63 A Control voltage: 24 V DC; 230 V; 50 Hz Dimensions: 2800 x 600 x 2200 mm Performance Data Main Motor: 18.5 kW Feeder Pressure-Vacuum Pump: 4.0 kW Machine Power: 41 kW Average Power (7500 sheets/h): 24 kW Average Power Consumption (7500 sheets/h): 50 A Pneumatic Punch Compressed Air Connection = Operating Pressure: 5.5 bar Minimum Pressure: 4.5 bar Air Consumption Based on Intake Volume: 27 m³/h (with one sheet stretching device) Additional Air Consumption: 25 m³/h (for each additional sheet stretching device) Pneumatic Feeder Compressed Air Connection: 0.6 bar Vacuum Connection: -0.6 bar Iolhccov T T N Heqketf Air Consumption: 70 m³/h each Noise Emissions According to DIN 45635, the Sound pressure levels at the machine's operating stations are below dB(A). The machine is fully functional and in very good condition. Various accessories are included.

Condition: not inspected (used), Strapping machines Signode KRS 3 pieces Have not been in operation for years. No guarantee of functionality Self-collection only: 200€ in cash Ielhcjua Sruscqkotf

Condition: ready for operation (used), Functionality: limited functionality, To be sold in a package: HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 HURCO BMC 45M Itjlhccqjt Takaskef Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but not put into operation. Freight basis: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2008, lifting height: 9,700 mm, empty load weight: 3,655 kg, fuel type: diesel, color: yellow, maximum load weight: 454 kg, Skyjack self-propelled work platform Model number: SJ6832RT Year of manufacture: 2008 Iolhet S Ug Tsccqketf Operating instructions and spare parts catalog available. Collection only.

Condition: good (used), Functionality: fully functional, Kerma hand punching machine Year of manufacture: 1979 Weight: approx. 2.5 t Inner frame width: 485mm high x 640mm wide Punching area: 520mm high x 660mm wide No TÜV Processable material: Corrugated cardboard B and C wave Solid cardboard up to 2mm (cutting and grooving) up to approx. 1000g/m² Safety mats must be retrofitted for TÜV testing. Accessories 10 frames 5 counter punching plates Delivery conditions: Pick up from location in Germany, not dismantled, not packaged Itolhccjt S Rlfeqkef

Condition: as good as new (ex-display), Year of construction: 2005, Functionality: fully functional, Wellmatic packaging machine (as good as new) for books, brochures, CDs, DVDs, catalogs, spare parts etc.. Using self-adhesive corrugated cardboard rolls. The package length is automatically adjusted to the product length, which is measured electronically at the infeed. The Wellmatic's maximum output of up to 35 parcels per minute depends on additional equipment such as product inserters, labelers, personnel and product type. The machine was only used by Dostal Maschinenbau GmbH for demonstration purposes and therefore has a very short running time. With Siemens Simatic OP7 (7-DP) operating panel, Simatic S7-300 control system, 2 Lenze Profibus-DP frequency inverters. Automatic and manual operation is possible. Outfeed conveyor: length 1,400 mm, working height 920 mm. Infeed conveyor: length 1,070 mm, working height adjustable from 940 - 985 mm; max. package/roll width: 450 mm; max. package thickness: 75 mm; max. product width approx. 350 mm. The machine has a transportable, removable base frame with a height of 160 mm (in addition to the specified working height). Prices: ex works, without packaging, without assembly Itjlhjt S Nr Rjccqksf

Condition: ready for operation (used), Functionality: fully functional, 17 pieces Braking resistor - BW 072-003 - 72Ohm / 250 W Ijlhccqjt S Iphjkstf

Condition: ready for operation (used), Functionality: fully functional, 10 pieces Brake control module - BMV 5.0 Itslhccqot S Ikrokjf

Condition: ready for operation (used), Functionality: fully functional, 2 mains filters - NF 048-503 - 48A Ielhccet S Iiujqkstf

Condition: ready for operation (used), Functionality: fully functional, 1 piece Mains filter - NF 035-503 - 35A Iolhccqot S Iihsketf

Condition: ready for operation (used), Functionality: fully functional, 2 mains filters - NF 018-503 - 18A Ijlhccot S Igtoqkjtf

Condition: ready for operation (used), Functionality: fully functional, 1 piece Braking resistor - BW 018-035 P - 3.5 kW Islhccqot Swa Nsketf

Condition: ready for operation (used), Functionality: fully functional, 2 frequency inverters - MC07B0150-503-4-00 / FSC11B - 22.2kVA Itjlhccot Swapoqkjf

Condition: ready for operation (used), Functionality: fully functional, 1 piece Frequency inverter - MC07B0220-503-4-00 / FSC11B - 1.5kW Itjlhcot Sv Ryscqkjf

Condition: ready for operation (used), Functionality: fully functional, 2 pcs. frequency inverter - MC07B0005-5A3-4-50 / FSC11B - 1,5kW Itslhccot Sv Husqkef

Condition: ready for operation (used), Functionality: fully functional, 9 pieces Frequency inverter - MC07B0015-5A3-4-50 / FSC11B - 1,5kW Itjlst Sv Ekohccqkjf

Condition: ready for operation (used), Functionality: fully functional, 2 servo multiple amplifiers - MXM80A-000-000-00 DHF41B Iolhcot Su Abocqkotf

Condition: ready for operation (used), Functionality: fully functional, 2 servo amplifiers - MXP81A-010-503-00 - 10kW Ijlhcet Suyyecqkstf

Condition: ready for operation (used), Functionality: fully functional, 1 servo amplifier - MXA81A-008-503-00 - 4.5kW Itolet Subkehccqkjf

Condition: ready for operation (used), Functionality: fully functional, 8 servo amplifiers - MXA81A-004-503-00 - 2.2kW Ijlhccot Suatjqketf

Condition: new, Functionality: fully functional, Year of construction: 2015, machine/vehicle number: WOLPD8EN4F80661454, Rear bumper complete Opel Astra 2,0l Sports Tourer Fahrzeug-Ident-Nr.: WOLPD8EN4F80661454 Itslhot Sfuhsccqksf Year of construction: 2015 Part number Description Quantity ZL13397839 081045/Bumper H. 1 ZL13370757 081045/Reflector H.L. 1 ZL13370756 081045/Reflector H.R. 1 ZL13368944 081045/trim bumper H.L. 1 H.L. 1 ZL13368945 081045/trim bumper H.L. 1 H.R. 1 ZL13368946 081045/trim bumper H.L. 1 M.H. 1 ZL13368951 081045/Guide rail H.R. 1 ZLYQ00159780 081045/MUL SCREW RLX RDL 6 ZLYQ00125980 081045/REMOVABLE RIVET 2 ZL24449408 081045/nut 4 ZL13358933 081045/filler housing 1 Collection only. Cash payment only.

Condition: used, Year of construction: 2000, Functionality: fully functional, 7 x chain conveyors for Euro pallets Manufacturer: Krifft + Zipsner GmbH Model: BPA-7-M Year of construction: 2000 Drive motor: (7x) R37DT80N4; 0,75kW; 29 1/min; B3 Track spacing: 4 x 1050 mm 3 x 920 mm Total height of chain conveyor: 350 mm (as in photos) Height of stall surface to underside of conveyor (adjusting screw): 75mm Chain conveyor length: 5 x 1600mm Itolhccqet R Rrpskjf 2 x 2000mm. Mains voltage: 400V Frequency: 50Hz Control voltage: 24V DC Rated current: 20A Supply line fuse: 35A Max. Conveyor system load: 1500kg Pallet type: W=800-1100mm, L=1200-1600; H=140-150mm The pallets are picked up at 120cm sides and stand lengthwise on the transport surface. When placed in a row, the 7 machine parts measure 12m. The machine parts can be freely positioned and aligned. You can also leave some space during assembly. A maximum of 200mm is estimated to prevent the pallets from tipping over when loaded on one side. In this case, the system can be pulled up to 13.20m. Collection only. We look forward to receiving your offer.